Pipe Pile. New Jersey Department of Transportation, Brielle, NJ. Route 70 Bridge over the Manasquan River, Brielle, NJ. USACE, Santa Maria, CA

Similar documents
HOW PIPE IS MANUFACTURED: CONTINUOUS WELD PIPE: PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

API 5L LSAW,DSAW PIPE

Tianjin Nolite Steel Co.,Ltd Page 1 of 10. Tianjin Nolite Steel Co.,Ltd

Welcome. Mission. About Us. to Sharjah Steel Corporate Portfolio

Tianjin Nolite Steel Co. Ltd.

Structural Channels A-36:20-40 LG. Standard Beams

TABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates

Section 906. STRUCTURAL STEEL

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds

Part 7: 1992 Specification for materials and workmanship Cold-formed

STAINLESS STEEL SHEETS

Specification for the Fabrication of Structural Steel Pipe API SPECIFICATION 2B SIXTH EDITION, JULY 2001 EFFECTIVE DATE: JANUARY 1, 2002

Techniques for Detection of Surface Defects in Tubing and Pipe

HF-ERW. Pipes & Tubes HF-ERW Marunouchi, Chiyoda-ku,Tokyo Japan Tel:

Tin mill products. USA schedule of price extras

SEAMLESS AND WELDED PIPE

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

ANSI/AWS D An American National Standard. Structural Welding Code Sheet Steel

About Nucor Skyline. About Nucor Skyline. Customer focus, our core philosophy. Nucor Skyline, your true project partner

PRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com

ASTM Standards for Pipe & Fittings

UNITED INDUSTRIES GROUP INC.

QATAR STEEL TUBE & PIPE CATALOGUE INDUSTRIES FACTORY (W.L.L) qatarsteelfactory.com

Comparison of BS and BS EN for steel materials

Product Guide Specification

Roll Bonding or Roll Welding

张家港市张运机械制造有限公司 Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd. ZY76 (Enlarged to 114) HF Welded Pipe Mill Solution

KNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING

T-H HELICOIDAL SAW PIPE. Foolproof efficiency and safety. A true fact. TUBERÍA HELICOIDAL T-H LICENCIA API-5L L-0831 RE-1AFM-01-12

NAPCA Workshop August 19, 2010 Houston, Texas Kenneth Y. Lee Office of Pipeline Safety

Remember, on shop drawings for elastomeric bearings (Method B) to verify: 1. Vulcanize pad to sole plate - adhesives (epoxies) are unacceptable;

Standard Specification for Welded and Seamless Steel Pipe Piles 1

HT-406 Specification Guide

Lecture 3-2: Hull production Steel processing methods

ABOUT US OUR CREDENTIALS

Standard Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement 1

Union County Vocational - Technical Schools Scotch Plains, New Jersey

CARBON STEEL BARS HOT ROLLED

Appendix 3 JIS Steel and Related Standards 471

Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) 1

AMENDMENTS TO OPSS 1802 (JAN 95) MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE SUPPLY, STORAGE, AND DELIVERY OF WELDED STEEL PIPE

ITEM 432 TUNNEL CONSTRUCTION

TRICON DOUBLE-CON PLUS

JOB BB0414 PORTER RD. HWY. 112/71B WIDENING & INTCHNG. IMPVTS. (S) AUGUST 10, 2016

Welding of pipes Past, Present and Future

SECTION REINFORCING STEEL

Module - 4 Advanced Welding Processes Lecture - 1 Submerged Arc Welding (SAW)

SECTION NON--STRUCTURAL METAL FRAMING

1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.

Kasetsart University. INDT0204: Welding. Types of Welding

Bulk Deformation Forming - Rolling

Welding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding

Introduction. pg 01.

SECTION STRUCTURAL STEEL

Product Evaluation Report

SAMPLE SPECIFICATION ONLY FOR INFORMATIONAL PURPOSES NOT INTENDED FOR DUPLICATION OR USE SECTION XX.XX WELDED WIRE REINFORCEMENT

Spec 5CT 7th General Is WT control required for Grade K-55 seamless casing with additional SR2 requirements?

Ministry of Forests & Range

GUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED

Introduction to Welding Technology

TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS

Mission Statement. State Steel strives to provide quality products and services at competitive

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur


SECTION 9 Aluminum. SECTION 9: Aluminum General Information Diamond Floor Plate

SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE

Piling and Structural Division

STAINLESS STEEL DELIVERY PROGRAM CONTENTS

7. Stud Welding. 7.1 Scope. 7.2 General Requirements

Contents EN :2008+A1:2011 (E) Page

Do not place bundles of deck so as to overload the supporting structure.

isd dunaferr Product catalogue

Standard Pipe & Line Pipe

MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES

STRUCTURAL STEEL FRAMING Section

The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.

Pipeline steel tough enough for the most stringent demands

Mill-Pro STEEL PIPE PILES FABRICATION & COATING Revision 1. Australia AS

TAM International, Inc.

Facility Repairs - MCAS Cherry Point - Tank Farm A SECTION STRUCTURAL STEEL 05/14

SPECIFICATION SERVICE SADDLE DOUBLE BALE MODEL 314

HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986)

Content Welding equipment for metallurgical industry

Item 442 Metal for Structures

SAMPLE SPECIFICATION ONLY FOR INFORMATIONAL PURPOSES NOT INTENDED FOR DUPLICATION OR USE SECTION XX.XX WELDED WIRE REINFORCEMENT

Control Lines & Flatpacks Control Line

49 CFR Part 192. Not applicable to welding during manufacture of pipe and components

HIGH TECHNOLOGY PRODUCTS AND SERVICES FOR YOUR MOST DEMANDING CORROSIVE CHEMICAL ENVIRONMENTS

High strength fine grained structural steel. Quenched and tempered. Product description. 890 a product brand of Dillinger 1/6

High strength fine grained structural steel. Quenched and tempered. Product description. 965 a product brand of Dillinger 1/6

SUPERIOR CAL-SHIELDS Features & Benefits FAST

API 5L ERW Pipe 168.3*( )from DPBD,TIANJIN

Current issues within the UK steel supply chain for the offshore wind industry

ITEM 442 METALS FOR STRUCTURES

LALLY NEW MILL SECONDARY TUBULAR PRODUCTS GREENEST FOR THE PLANET AND YOUR BOTTOM LINE A Whitepaper by Lally Pipe & Tube June

WWR For Structural Applications A Discussion of Current Product Knowledge and Practices

Oil and Gas Pipeline Design, Maintenance and Repair

Technology that works for you.

Marcegaglia do Brasil

MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE

Transcription:

Pipe Pile Similar to H-piles, pipe piles are also designed to transfer structural loads through the foundation to soils below. Where H-piles are typically classified as point bearing, pipe piles are most efficient as friction piles. Pipe piles have substantial surface area that interacts with the surrounding soil to provide great frictional load resistance. Pipe piles are also used in conjunction with sheet piles to add lateral stiffness and bending resistance where loads exceed the capacity of sheet piles alone. New Jersey Department of Transportation, Brielle, NJ L.B. Foster provides ERW, DSAW, spiral weld and rolled and welded pipe pile in a wide range of sizes and lengths to meet your requirements. In addition, L.B. Foster provides value added services such as coating and welding to facilitate complete pipe pile solutions. Route 70 Bridge over the Manasquan River, Brielle, NJ USACE, Santa Maria, CA

www.lbfosterpiling.com Pipe Accessories L.B. Foster can provide the full line of pipe piling accessories And can also offer such services as: Outside fit cutting shoe Backing ring Coating Coal tar epoxy Fusion bond Galvanizing Inside fit cutting shoe Cutting and/or splicing of pipe to specific job lengths Inside fit conical point Drive on splicer Accessory Attachment Cutting shoes Conical points Backing rings Splicers Inside fit conical point snub nose

Pipe Weights Wall Thickness (inches) lbs / ft 0.219 0.250 0.312 0.375 0.438 0.500 0.625 0.750 0.875 1.000 8.625 19.68 22.38 27.73 33.07 38.33 43.43 10.75 24.65 28.06 34.81 41.59 48.28 54.79 12 27.58 31.40 38.98 46.60 54.14 61.47 76.00 12.75 29.34 33.41 41.48 49.61 57.65 65.48 81.01 ERW DSAW 14 32.26 36.75 45.65 54.62 63.50 72.16 89.36 16 36.95 42.09 52.32 62.64 72.86 82.85 102.72 SPIRAL WELD 18 41.63 47.44 58.99 70.65 82.23 93.54 116.09 Outside Diameter (inches) 20 52.78 65.66 78.67 91.59 104.23 129.45 24 63.47 79.01 94.71 110.32 125.61 156.17 186.41 26 68.82 85.68 102.72 119.69 136.30 169.54 202.44 28 74.16 92.35 110.74 129.05 146.99 182.90 218.48 253.72 30 79.51 99.02 118.76 138.42 157.68 196.26 234.51 272.43 32 84.85 105.69 126.78 147.78 168.37 209.62 250.55 291.14 34 90.20 112.36 134.79 157.14 179.06 222.99 266.58 309.84 36 95.54 119.03 142.81 166.51 189.75 236.35 282.62 328.55 374.15 38 100.89 125.70 150.83 175.87 200.44 249.71 298.65 347.26 395.53 40 106.23 132.37 158.85 185.24 211.13 263.07 314.69 365.97 416.91 42 111.58 139.04 166.86 194.60 211.82 276.44 330.72 384.67 438.29 44 116.92 145.71 174.88 203.97 232.51 289.80 346.76 403.38 459.67 46 122.27 152.38 182.90 213.33 243.20 303.16 362.79 422.09 481.05 48 127.61 159.05 190.92 222.70 253.89 316.52 378.83 440.80 502.43 54 179.06 214.97 250.79 285.96 356.61 426.93 496.92 566.57 60 199.08 239.02 278.88 318.03 396.70 475.04 553.04 630.71 66 219.09 263.07 306.98 350.10 436.79 523.14 609.16 694.85 72 239.10 287.13 335.07 382.17 476.87 571.25 665.29 758.99 78 259.11 311.18 363.16 414.24 516.96 619.35 721.41 823.13 84 279.12 335.23 391.26 446.31 557.05 667.46 777.53 887.27 90 299.13 359.28 419.35 478.38 597.14 715.56 833.65 951.41 96 319.15 383.34 447.44 510.45 637.22 763.67 889.78 1015.55

www.lbfosterpiling.com Electric Resistance Weld Electric resistance weld (ERW) pipe is normally produced in sizes from 2-³ ₈ OD thru 24 OD. ERW is produced from individual sheets or continuously from rolls of skelp. There are two important differences in the production of ERW pipe versus CW pipe. ERW pipe is cold formed into a cylindrical shape rather than hot formed. An electric current rather than a flame is used to heat the edges of the strip for the fusion weld. Revolving copper discs serve as electrodes and raise the temperature to approximately 2600 F for effective welding. As in CW pipe, no extraneous metal is added; in fact, due to the extreme pressure of the rolls, steel is extruded on both the inside and outside of the pipe at the point of the weld. This is called flash and is removed on the OD by stationary cutters while still white-hot for A252 grades, and both the ID and OD for other grades. As in CW production, ERW pipe is subject to numerous finishing operations. ERW pipe is primarily used as API line pipe for the transmission of gas and oil. It is also used for the transmission of water, under AWWA specifications, as piling and slurry pipe and in mechanical applications.

Electric Resistance Weld ERW Wall Thickness (inches) lbs / ft 0.188 0.219 0.250 0.312 0.375 0.438 0.500 0.625 0.750 Outside Diameter (inches) 8.625 16.96 19.68 22.38 27.73 33.07 38.33 43.43 10.75 21.23 24.65 28.06 34.81 41.59 48.28 54.79 12.75 25.25 29.34 33.41 41.48 49.61 57.65 65.48 14 27.76 32.26 36.75 45.65 54.62 63.50 72.16 16 31.78 36.95 42.09 52.32 62.64 72.86 82.85 102.72 18 41.63 47.44 58.99 70.65 82.23 93.54 116.09 20 52.78 65.66 78.67 91.59 104.23 129.45 24 63.47 79.01 94.71 110.32 125.61 156.17 186.41 ERW is able to be produced to pipe specifications A252, A500, A53 and API 5L. Pipe can be produced to the above specifications utilizing other grades of steel (A36, A572, A588, etc.) Wall Thickness Pipe Weight Calculation: LB / FT = (OD-WT) x WT x 10.69 OD = Outside Diameter WT = Wall Thickness Outside Diameter

www.lbfosterpiling.com Double Submerged Arc Weld Double submerged arc weld pipe (DSAW) derives its name from the welding process wherein the welding arc is submerged in flux while the welding takes place. Both inside and outside welds are required and are usually accomplished in separate processes, hence the word double. These separate welds consume a portion of the other, resulting in a single high quality weld nugget. DSAW pipe is normally produced in sizes from 24 through 48 OD and wall thicknesses from.312 through 1. Two different processes are used to manufacture DSAW pipe; the pyramid rolls method, and the U-0-E method. The difference in the processes is found only in the method of forming the cylinder. In the pyramid rolls process the cylinder is formed between three rolls arranged in a pyramidal fashion. As the name implies, the U-0-E method uses a U press and O press for forming. Other parts of the process such as finishing and inspection are similar. Both processes use flat steel plate as the raw material. DSAW pipe may or may not be cold expanded. Cold expansion is a process where the pipe is expanded (up to 1.5%) to obtain its final OD dimension. In the process, a gain of yield strength results. Expansion is most often utilized in a U-O-E mill due to the need to recover the yield strength lost during forming in the O press. DSAW pipe is normally produced in double random lengths with square ends or beveled for welding. Fabrication services are available to produce lengths longer than the standard DRL (double random lengths 38-42 ). A wide range of external coatings and internal linings are available with DSAW pipe.

Double Submerged Arc Weld DSAW Wall Thickness (inches) lbs / ft 0.312 0.375 0.500.0625 0.750 0.875 1.000 24 79.01 94.71 125.61 156.17 186.41 26 85.68 102.72 136.30 139.54 202.44 28 92.35 110.74 146.99 182.90 218.48 253.72 Outside Diameter (inches) 30 99.02 118.76 157.68 196.26 234.51 272.43 32 105.69 126.78 168.37 209.62 250.55 291.14 34 112.36 134.79 179.06 222.99 266.58 309.84 36 142.81 189.75 236.35 282.62 328.55 38 150.83 200.44 249.71 298.65 347.26 40 158.85 211.13 263.07 314.69 365.97 42 166.86 211.82 276.44 330.72 384.67 438.29 44 174.88 232.51 289.80 346.76 403.38 459.67 46 182.90 243.20 303.16 362.79 422.09 481.05 48 190.92 253.89 316.52 378.83 440.80 502.43 DSAW is able to be produced to pipe specifications A252 and API 5L. Pipe can be produced to the above specifications utilizing other grades of steel (A36, A572, A588, etc.) Wall Thickness Pipe Weight Calculation: LB / FT = (OD-WT) x WT x 10.69 OD = Outside Diameter WT = Wall Thickness Outside Diameter

www.lbfosterpiling.com Spiral Weld Spiral weld pipe, as the name implies, is a steel pipe that has a seam running its entire length in a spiral form. In the past, due to the method of manufacture, spiral welded pipe was relegated to low pressure and structural applications. With the development of the submerged arc welding process, the production of large hot rolled coils of sufficient width and the development of dependable non-destructive testing methods, it is now possible to produce spiral weld pipe for high-pressure service. Present spiral weld mills consist of a de-coiling device (in the case of strip base material), a strip connecting welder, straightening rollers, edge preparation tools (shearing and trimming), prebending devices, a bending and cage forming system, an internal welder, an external welder (both submerged arc), ultrasonic testing apparatus and cutting devices. The material passes through all these production stages continuously. The angle between the flat strip being fed into the machine and the finished pipe leaving the machine controls the pipe diameter in ratio to strip width and the angle of the weld in the pipe. Because of the method of manufacture, a wide variety of diameters can be produced. The diameter tolerance is small, particularly with regard to ovality; and the pipe, due to its axial symmetry, has an inherent straightness. The length range is infinite and is controlled only by the economics of transportation. Spiral weld pipe is used for piling and structural applications, as well as for dredging, slurry, water and other pipelines. Spiral weld pipe is produced in accordance with the dimensional and tolerance requirements of various ASTM, AWWA and API specifications.

Spiral Weld Spiral Weld Wall Thickness (inches) lbs / ft 0.250 0.312 0.375 0.438 0.500 0.625 0.750 0.875 1.000 18 47.4 59.0 70.7 82.2 93.5 20 52.8 65.7 78.7 91.6 104.2 22 58.1 72.3 86.7 101.0 114.9 142.8 24 63.5 79.0 94.7 110.3 125.6 156.2 186.4 26 68.8 85.7 102.7 119.7 136.3 169.5 202.4 28 74.2 92.4 110.7 129.1 147.0 182.9 218.5 Outside Diameter (inches) 30 79.5 99.0 118.8 138.4 157.7 196.3 234.5 272.4 32 84.9 105.7 126.8 147.8 168.4 209.6 250.5 291.1 34 90.2 112.4 134.8 157.1 179.1 223.0 266.6 309.8 36 95.5 119.0 142.8 166.5 189.7 236.3 282.6 328.6 374.2 38 100.9 125.7 150.8 175.9 200.4 249.7 298.7 347.3 395.5 40 106.2 132.4 158.8 185.2 211.1 263.1 314.7 366.0 416.9 42 111.6 139.0 166.9 194.6 221.8 276.4 330.7 384.7 438.3 48 127.6 159.1 190.9 222.7 253.9 316.5 378.8 440.8 502.4 54 179.1 215.0 250.8 286.0 356.6 426.9 496.9 566.6 60 199.1 239.0 278.9 318.0 396.7 475.0 553.0 630.7 66 219.1 263.1 307.0 350.1 436.8 523.1 609.2 694.9 72 239.1 287.1 335.1 382.2 476.9 571.2 665.3 759.0 78 259.1 311.2 363.2 414.2 517.0 649.4 721.4 823.1 84 279.1 335.2 391.3 446.3 557.0 667.5 777.5 887.3 90 229.1 359.3 419.3 478.4 597.1 715.6 833.7 951.4 96 319.1 383.3 447.4 510.4 637.2 763.7 889.8 1015.6 Spiral weld is able to be produced to pipe specifications A252, API 5L and A139. Pipe Weight Calculation: LB / FT = (OD-WT) x WT x 10.69 OD = Outside Diameter WT = Wall Thickness Pipe can be produced to the above specifications utilizing other grades of steel (A36, A572, A588, etc.)