We measure it. Flue gas analyzer testo 327 The special class entry instrument Simple menu structure O 2 4-line segment display with LED illumination Fast, single-plug probe connection 8 selectable fuels Life expectancy of sensors minimum 3 years Easy IR printout Memory for 20 measurement values in testo 327-2 Li-Ionen rech. battery (2,400 ma), life 10 hours CO 2 CO hpa qa TÜV-tested according to 1. BImSchV / EN 50379 Eta C
testo 327-1 / testo 327-2 We measure it. The special class entry instrument testo 327 is the entry measuring instrument for flue gas analysis. It measures combustion efficiency, C, O 2, CO 2, CO and flue draught. A dual wall O 2 measurement as well as an ambient CO measurement are also possible. The powerful LED backlighting in the 4-line display guarantees good legibility even in unfavourable lighting. The measuring instrument stands out thanks to its ergonomic housing design as well as its durability (IP40). The integrated sensor and instrument diagnosis offers security and guarantees high availability of the instrument. The testo 327 is TÜVtested according to BImSchV and fulfils the requirements of EN50379. The quick probe connection of the testo 327 allows easy and uncomplicated connection of the probe. For simpler applications, the single-sensor instrument versions testo 327-1 O 2 and testo 327-1 CO are suitable. The testo 327-1 O 2 measures the O 2 content of the flue gas, the flue gas temperature and the flue draught. The flue gas loss and the efficiency are calculated. The testo 327-1 measures the CO content of the flue gas, the flue gas temperature and the flue draught. The "second skin" is integrated into the instrument design and protects from impact and shock during tough everyday use Excellent display clearness even in unfavourable lighting conditions Stable probes filter particles before they get into gas paths Fast probe connection: All gas paths are connected with one "click" Sensors are as easy to change as a battery Latest Li-ion rechargeable batteries Built-in condensate trap
testo 327-1 / testo 327-2 We measure it. testo 327-1 The starter instrument for flue gas analysis Contains all basic functions such as combustive effectivity, flue gas loss, O 2, CO 2, CO and flue draught Robust and protected from impact by Elastomer protection class Easy operational structure and procedure Ideal handling thanks to easy menu structure and ergonomic housing Stable measurement value within 30 sec. Compatible with the entire probe range of testo 330 Low weight (ca. 500 g) TÜV-geprüft nach 1. BImSchV / EN 50379 Teil 2 für O 2, C, hpa und Teil 3 für CO testo 327-1 is your introductory instrument to flue gas analysis. It measures combustion efficiency, C, O2, CO2, CO and flue draught. The strong LED background light in the 4 line display guarantees an easy-to-read display even if lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability. testo 327-2 The service instrument for flue gas analysis The additional functions of the testo 327-2 Bluetooth wireless transfer (optional) IR & IRDA interface for easy readout of data to PC, printer or Pocket PC Life expectancy of the measurement cells up to 3 years Security thanks to instrument and sensor diagnosis Differential temperature measurement Differential pressure measurement with 2 measuring ranges Memory for 20 measurements Li-ion rechargeable battery (2,400 ma), life 10 Std. CO measurement with H2-compensation (optional) TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, C, hpa and CO with H 2 -compensation Bltutooth wireless transfer (optional) H 2 -compensated CO measurement cell for official testing according to EN norm 50379-2 (optional) Additional differential pressure measurement up to 200 mbar Powerful Li-ion rechargeable battery with 10-hour lifetime with pump running testo 327-2 is the convenient service instrument for flue gas analysis. The measurement cell has a lifetime of up to 3 years. The status diagnosis of wearing- and service-parts offers higher planning security in the conduction of measurements. testo 327-2 can optionally be equipped with a CO measurement cell, in order to conduct official tests according to EN 50379-2.
testo 327-1 We measure it. Flue gas analyzer testo 327-1 testo 327-1 testo 327-1 flue gas analyzer, incl. rech. battery and calibration protocol; measures O2, CO, hpa, C Technical data Temperature measurement -40 to +600 C Draught measurement ±40 hpa Efficiency 0 to 120% measurement (Eta) Flue gas loss (qa) 0 to 99.9% O 2 measurement 0 to 21 Vol. % 0632 3201 CO 2 measurement CO measurement 0 to CO2 max 0 to 4000 ppm testo 327-1 CO testo 327-1 CO flue gas analyzer, incl. rech. battery and calibration protocol; measures CO, hpa, C 0632 3204 General technical data Storage temp. -20 to +50 C Oper. temp. -5 to +45 C Power supply via Li-Ion rechargeable battery Battery life > 5 h Weight Approx. 500 g testo 327-1 O2 Dimensions Warranty 216 x 68 x 47 mm 2 years on instrument, probes and gas sensors 1 year on thermocouple and rechargeable battery (wearing parts excluded) testo 327-1 O2 flue gas analyzer, rech. battery and calibration protocol; measures O2, hpa, C 0632 3203 testo 327-1 Basic Set for heating and installation technicians testo 327-1 flue gas set basic for heating fitters and installation technicians, incl. rech. batteriesand calibration protocol; mains unit 100-240 V formains operation or battery charging in instrument; compact flue gas probe, length 180 mm, Ø 6 mm; combustion air temperature probe, length 190 mm, fast printer with wireless infrared interface; instrument cleaner 100 ml, basic system case instrument, probes and accessories 0563 3203 70 Illustration may differ from original Easy menu navigation 4 line segment display LED display light Easy IR printout Built-in condensate trap TÜV By RgG 253 acc. to 1. BImSchV EN 50379 Part 2 for O 2, C, hpa EN 50379 Part 3 for CO Small Li-ion rechargeable battery (1200 ma, lifetime of 5 h) can be recharged inside or outside instrument Fast probe connection using single probe plug Ambient CO measurement using flue gas probe O 2 dual wall measurement (can be stored) Separate AT temperature measurement Undiluted CO measurement (can be stored) Draught measurement 6-8 fuels (country-specific (e.g. UK=6)) IP 40
testo 327-2 We measure it. Flue gas analyzer testo 327-2 testo 327-2 testo 327-2 flue gas analyzer, incl. rech. battery and calibration protocol; measures O2, CO, hpa, C Technical data Temperature measurement -40 to +600 C Draught measurement ±40 hpa Efficiency 0 to 120% measurement (Eta) Pressure measurement ±200 hpa Flue gas loss (qa) 0 to 99.9% 0632 3202 O 2 measurement 0 to 21 Vol. % CO 2 measurement 0 to CO2 max CO measurement Option CO measurement (H 2 -compensated) 0 to 4000 ppm 0 to 8000 ppm testo 327-2 Set for heating fitters testo 327-2 flue gas set serivce for heating fitters, incl. rech. battery and calibration protocol; including option: CO-H2 measurement; mains unit 100-240 V for mains operation or battery charging in instrument; modular flue gas probe, length 300 mm, Ø 8 mm, TÜV approval; combustion air temperature probe, length 190 mm; hose connection set for separate gas pressure measurement; fast printer wireless infrared interface; flexible probe shaft, length 300 mm, Ø 10 mm, Tmax. 180 C; instrument cleaner, 100 ml; basic system case for instrument, probes and accessories General technical data Storage temp. -20 to +50 C Oper. temp. -5 to +45 C Power supply via Li-ion rechargeable battery Battery life > 10 h 0563 3202 70 Illustration may differ from original Weight Dimensions Warranty Approx. 500 g 216 x 68 x 47 mm 2 years on instrument, probes and gas sensors 1 year on thermocouple and rechargeable battery (wearing parts excluded) Life expectancy of gas sensors up to 3 years Assurance thanks to instrument and sensor diagnosis IR and IRDA interface for easy reading out of data to printer or Pocket PC BLUETOOTH wireless transfer (optional) Delta T measurement Delta P measurement: 2 measurement ranges Store (20 readings) Li-ion rechargeable battery (2,400 ma), 10 hr lifetime TÜV By RgG 254 acc. to 1. BImSchV CO option with H2 compensation Official test in accordance with EN standard 50379-2 for C; O2, hpa, Part 3 for CO Optional Part 2 for CO with H2 compensation *Country permits: The BLUETOOTH wireless module used by Testo has permits for the following listed countries, and can only be used in those countries, i. e. BLUETOOTH wireless transfer may not be used in any other country! Europe including all EU member states: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway and Switzerland; Non-European countries: Ukraine, Colombia and El Salvador.
testo 327-1 / testo 327-2 We measure it. Accessories Upgrade/Options Option: CO-H2-measurement for testo 327 Option: fine draught measurement, resolution 0.1 Pa, measurement range up to100 Pa (instead of standard draught measurement) - for testo 327-1, 327-1 O2/CO and testo 327-2 Option: fine differential pressure measurement, resolution 1 Pa; for testo 327-2 only Option BLUETOOTH module* 0440 3273 0440 3271 0440 3272 0344 0011 Retrofits Retrofit: O 2 measurement for testo 327-1 CO Spare sensors Spare O2 sensor for testo 327-1, 327-1 O2 Spare CO sensor for testo 327-1, 327-1 CO Spare O2 sensor, Testo-specific Spare CO sensor Testo-specific (without H2 compensation) Spare CO sensor testo-specific (H2 compensated) 0390 0047 0390 0046 0390 0092 0390 0095 0390 0109 Accessories Mains unit international 100-240 V AC / 6,3V DC for mains operation or battery charging in instrument for mains operation or battery charging in instrument Spare rech. batt. w/ charging station testo 327 / testo 330-1/-2 Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries; for printing out measurements on site Spare thermal paper for printer (6 rolls), permanent ink Instrument cleaner, 100 ml 0554 1096 0554 1087 0554 0549 0554 0568 0554 1207 Smoke tester with oil; soot sheet; for measuring soot in flue gas Hose connection set for separate gas pressure measurement testo 327 / testo 330-LL Full version easyheat and easyheat.mobile. Software package for PC and Pocket PC. (for testo 327-2 only) 0554 0307 0554 1203 0554 1210 ISO calibration certificate/flue gas, calibration points 2.5% O2; 100 and 1000 ppm CO; 800 ppm NO; 80 ppm NO2; 1000 ppm SO2 Differential temperature set consisting of 2 Velcro probes and temperature adaper testo 327 Spare particle filter, 10 off Spare soot filter paper; 8 paper rolls 0520 0003 0554 1208 0554 3385 0554 0146 Cases Basic system case testo 327-1/-2 for instrument, probes and accessories 0516 3334 *Country permits: The BLUETOOTH wireless module used by Testo has permits for the following listed countries, and can only be used in those countries, i. e. BLUETOOTH wireless transfer may not be used in any other country! Europe including all EU member states: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway and Switzerland; Non-European countries: Ukraine, Colombia and El Salvador.
testo 327-1 / testo 327-2 We measure it. Probes Compact basic flue gas probes available in two lengths, probe stop, NiCr-Ni thermocouple, 1.5 m hose and particle filter included Flue gas probe compact; length 180 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni thermocouple, 2.2 m hose and particle filter included Flue gas probe compact; length 300 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni thermocouple, 2.2 m hose and particle filter included 0600 9740 0600 9741 Modular flue gas probe from the testo 330 product line, available in 2 lengths, probe stop, NiCr-Ni thermocouple, 2.2 m hose and particle filter included Flue gas probe; length 180 mm; Ø 8 mm; Tmax. 500 C; TÜV approval; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 300 mm; Ø 8 mm; Tmax. 500 C; TÜV approval; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 180 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 300 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe flexible; length 330 mm; Tmax. 180 C; short-term 200 C; bending radius max. 90 C for measuring at inaccessible points; probe stop; NiCr-Ni-thermocouple; 2,2 m hose and particle filter included 0600 9760 0600 9761 0600 9762 0600 9763 0600 9764 Probe accessories Probe shaft; length 180 mm; 8 mm; Tmax. 500 C Probe shaft; length 180 mm; Ø 6 mm; Tmax. 500 C Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 C Probe shaft with probe stop, length probe shaft 335 mm, Tmax probe shaft 1000 C, Ø probe shaft 8 mm Probe shaft flexible; length 330 mm; Ø 10 mm; Tmax. 180 C Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation Probe shaft multi-hole; length 180 mm; Ø 8 mm; for mean CO calculation Hose extension; 2.8 m; extension cable for probe and analyzer 6 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 C 8 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 C Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 C Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 C Modular flue gas probe handle 0554 9760 0554 9762 0554 9761 0554 8764 0554 9764 0554 5762 0554 5763 0554 1202 0554 3327 0554 3328 0554 3330 0554 3329 0440 3334 Additional probes Dual wall clearance probe for O2 supply air measurement 0632 1260 Combustion air temperature probes Combustion air temperature probe, immersion depth 300 mm Combustion air temperature probe, immersion depth 190 mm Combustion air temperature probe, immersion depth 60 mm Quick-action surface probe with sprung thermocouple strip; measuring range shot-term to +500 C 0600 9791 0600 9787 0600 9797 0604 0194
testo 327-1 / testo 327-2 We measure it. 0981 2664/msp/A/01.2012 www.testo.in Subject to change without notice.
We measure it. The new testo 330 LL visualizes measurement data graphically Understand flue gas analysis at a glance C hpa O 2 12.01.10 14:35 CO/H 2 testo AG Flue gas NO ΔP Options Start Values LL 4 years' warranty on instrument and probes
testo 330 LL The new flue gas analyzer testo 330 LL visualizes measurement data graphically Independently of the technology used, every combustion system must function optimally. More than ever, requirement-based heat provision, low energy consumption and reduced pollutant emission are of central significance. In order to be able to exploit existing optimization potential as well as possible, regular testing and adjustment of the heating system is necessary. The new Testo flue gas analyzers testo 330-1 LL and testo 330-2 LL offer even more professional support in this thanks to new instrument functions. Testo AG LPG Condensing boiler 122.3 C AT 18.01.10 14:35 5.8% qa The new colour graphic display of the flue gas analyzer testo 330 LL visualizes the measurement data graphically: Self-explanatory graphic curves as well as easy symbols and clear colour design ease the analysis of the measurement data considerably. X Options Start Values 2 The flue gas matrix The central element of the new graphic processing of the measurement data is the flue gas matrix. In the course of the flue gas measurement, this shows whether the CO and O 2 values, as well as other measurement parameters, are in the green, permitted range, and the heating system is thus optimally adjusted. Thumb symbols instantly show the status of the system. If the CO and O 2 concentrations measured are in the green range, the thumbs point up. If the recorded measurement values are not within the optimum range, the symbols of the flue gas matrix provide important information for the required adjustment of the heating system. Bad combustion the CO concentration is over the defined limit value, the recorded CO content is not within the ideal range Measurement value is not acceptable the CO and O 2 concentrations are considerably too high, the measurement values do not correspond to the prescribed norms and limit values High loss the O 2 concentration is over the defined limit value, the heating system is not working efficiently
We measure it. Understand flue gas analysis at a glance The advantages of the new flue gas analyzer testo 330 LL: High-resolution colour display for the graphic representation of the measurement data Extended measurement menus such as tightness testing and solid fuel measurement for comprehensive analysis of the heating system Logger function for easy long-term recording of the measurement curve Testo AG Natural gas 18.01.10 14:35 Measurements Folders Fuels Protocols Instrument settings Sensor settings Program Instrument diagnosis Testo AG Natural gas Measurements Flue gas 18.01.10 14:35 Fine pressure probe Draught measurement CO undiluted Smoke count/ HCT Differential temperature Testo AG Natural gas 14.09.09 14:35 OK Fuel OK Location Options Main menu select adjustment function Select one of the pre-set measurements Measurement data can be graphically visualized and quickly analyzed The measurement menus the right menu for every measurement task: Flue gas Differential pressure CO ambient Draught measurement Differential temperature CO 2 ambient Fine pressure probe O 2 input air Automatic burner BImSchV Gas flow rate Gas pipe tests CO undiluted Oil flow rate Solid fuel measurement Smoke number/hct Further advantages of the flue gas analyzer testo 330 LL: Ergonomic instrument design Thanks to the new colour design and the materials used, the instrument is also suitable for use in rough and dirty surroundings, and lies ergonomically in your hand. 3
testo 330 LL Typical measurement menus Extended measurement menus allow a comprehensive analysis of the heating system. These five typical measurement tasks illustrate how clearly the measurement data are presented in the display: Testo AG LPG Measuring 14.09.09 14:35 122.3 C AT 5.8 qa Ideal ranges 100 ppm CO 4 % O2 Options Stop Values The CO concentration is in the range of bad combustion. The instrument provides information on the ideal range. Flue gas measurement is the central measurement in flue gas Advantages of the new flue gas matrix: analysis. By determining the main values, CO and O 2, as well as other measurement parameters, a judgement can ment assistent for the main values O 2 The flue gas matrix acts as an adjust- be made as to whether your heating and CO system is properly adjusted or whether The optimization of the adjustment is there is a need for optimization. much easier the interpretation of the Different display options offer the right numerical values is no longer necessary presentation of the measurement values, depending on requirements: Thanks to the trend display, the measurement curve can be followed exactly, 4- to 8-line as numerical values 4 measurement values simultaneously presented in a line graph determined. and the measurement point precisely Main values O 2 and CO, as well as The automatic zoom function provides further measurement values, graphically displayed as a flue gas matrix current detail of the flue gas an enlarged and clear display of the matrix Testo AG Natural gas Gas pipe tests 14.09.09 14:35 Leakage test Usability Gas fitting tightness test Leak detection Setting OK Location The four measurements for testing the gas pipe The gas pipe test is divided into 4 measurements which guarantee a comprehensive test of the gas pipe: Gas tightness test, usability test, gas fitting tightness test and leakage detection. After selecting the desired measurement, the testo 330 LL begins directly with the corresponding gas pipe check. A separate gas leak detection probe is required for leakage detection. The gas tightness test can be conducted over a period of 10 minutes. The gas fitting tightness test is conducted over a period of one minute directly under operating conditions. Advantages of the new testo 330 LL: Thanks to prescribed measurement procedures, the desired test can be conducted quickly and easily The testo 330 LL leads the user through the measurement step by step, presenting the the corresponding information in the display The measurement data are displayed in easy and clear diagrams 4
We measure it. Testo AG Natural gas Measurement 14.09.09 14:35 FT max. FT Draught Underpressure Graph Start Save The result of the measurement: a negative pressure exists (-4.31 hpa) The draught measurement begins directly after the selection of the corresponding measurement menu. After the zeroing of the pressure sensor, the determination of the differential pressure between the surroundings and the flue takes place. Zeroing sonsor Display view in the course of the measurement during sensor zeroing Advantages of the new testo 330 LL: Graphically supported measurement menu for the determination of the flue draught with parallel core flow search Thanks to the integrated switchover valve technology, the testo 330-2 LL can remain in the flue during zeroing. In the testo 330-1 LL, the probe must be removed from the flue for zeroing The set alarm threshold will be shown directly on the display 14.09.09 14:35 Testo AG Natural gas Alarm threshold 30 ppm CO 22 ppm COamb Danger Options Stop Save The CO concentration is in the permitted range. The alarm threshold is not exceeded The CO environment measurement... determines the CO concentration in the ambient air. The measurement is presented in a simple graph. If the CO concentration is in the green range, the recorded concentration is permitted and the alarm threshold is not exceeded. The red danger range indicates a too high, not permitted CO concentration. Advantages of the new testo 330 LL: Easy, graphic presentaion of the adjustable alarm thresholds With the help of the trend display, the measurement curve can be followed The cursor marks the current CO concentration The instrument not only indicates the violation of the alarm threshold optically, it also provides an audible alarm Testo AG Natural gas 14.09.09 14:35 The differential pressure measurement ΔP takes place after selection of the measurement menu "Differential pressure". After setting up the pressure difference required for the measurement, the measurement curve can be followed directly in the display over a defined period. Advantages of the new testo 330 LL: The measurement curve of the differential pressure measurement can be followed directly in the line diagram Using the logger function, the measurement curve can be recorded over a defined period of up to 120 minutes Options Stop Line diagram of the differential pressure ΔP in a period of 3:15 mins Continuous measurement of the differential pressure ΔP over e. g. 5 mins 5
testo 330 LL The sensor diagnosis long life with even more security 14.09.09 14:35 Instrument diagnosis Error diagnosis Instrument information Sensor diagnosis Thanks to the extended sensor life of up to 6 years for O 2 and CO in the testo 330 LL, the follow-on costs for the user are drastically reduced. At least one O 2 and CO sensor replacement is saved during the course of the typical phase of use of the instrument. In addition to this, Testo gives 4 years warranty on the complete instrument incl. O 2 and CO sensors and probe. Exception: Wearing parts such as filter, thermocouple (12 months) NO/CO low sensor (24 months) The O 2 long-life sensor stands out against the standard sensor through a more stable design, an improved diffusion barrier to protect the anode material and a lead-free metal alloy. It is therefore not only more durable but also more environmentally friendly. Sensor diagnosis The sensor is OK. 14.09.09 14:35 OK The graphic-capable display allows sensor diagnosis with traffic light presentation The fine pressure probes can easily be attached at any measurement site by loop or magnet The fine pressure probe highest accuracy in the Pascal range The fine pressure probe is directly connected to the flue gas analyzer testo 330 LL. The different measurement menus and the measurement results are shown in the display of the testo 330 LL. The following menus with buffer stores are available: parallel draught measurement parallel ΔP measurement 4Pa measurement heating check Simultaneous gas pressure measurement and flue gas analysis is possible with the fine pressure probe. The gas pressure measurement can be carried out in logger operation, thus conducting a longterm measurement. Thanks to the zero point calibration at 1 second intervals, external temperature influences have no effect on the measurement value. For the measurement of the ambient temperature or the surface temperature, an additional temperature probe can be connected. Testo AG Natural gas The instrument firmware and the "easyheat" software are retrofittable free of charge: www.testo.com/easyheat/update. thanks to E draught E draught P E delta P 14.09.09 14:35 OK Highest accuracy zero-point adjustment at 1-second Individual measurement Program 4 Pa measurement Heating check intervals 6
We measure it. Easy, mobile data management for flue gas analysis The software package testo easyheat and easyheat.mobile The new top technology in flue gas measurement: the instrument series testo 330 LL with extended sensor life communicates not only with a PC, but also with a Pocket PC. Different software packages give the customer the possibility of adapting the testo 330 LL exactly to his communication needs. With the help of the PC software easyheat, the management of customer data, as well as the measurement sites and the already completed measurements, can be carried out easily on a PC at home. The Pocket-PC-Software easyheat.mobile supports wireless communication to Windows Mo- bile appliances. This allows wireless transfer of measurement data to a mobile appliance on site. Printout of the data from a Pocket PC or directly from the measuring instrument takes place via the IrDA/Bluetooth printer. USB / IrDA / Bluetooth USB / IrDA / Bluetooth USB / IrDA / Bluetooth IrDA / Bluetooth Wireless transfer* IrDA / Bluetooth Smoke tester testo 308 Information at www.testo.com * Country permits BLUETOOTH wireless transfer for the smoke tester testo 308 and the flue gas analyzer testo 330 LL The BLUETOOTH wireless module used by Testo has permits for the following listed countries, and can only be used in those countries, i. e. BLUE- TOOTH wireless transfer may not be used in any other country! Europe including all EU member states Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey European countries (EFTA) Iceland, Liechtenstein, Norway and Switzerland Non-European countries Ukraine, Colombia and El Salvador 7
testo 330 LL The probes the right accessories for every application The robust and easy-to-hold probe handle makes positioning easier. The probe has a quick-release fastener. This ensures that all gas paths are connected and confusion is impossible. The dirt filter housed in the handle reliably filters out dirt. In addition, the probes are extremely easy to look after and easy to clean. A range of lengths and diameters ensure a high degree of flexibility for all applications. On replacement, the probe shaft is simply placed on the probe handle and it engages. Multi-hole and annular gaps probes complete the line of flue gas probes. Both the ambient CO probe and the CO 2 probe are automatically detected by the instrument and the measuring results appear immediately in their own respective graphically supported menu. Moreover, the adjustable alarm threshold is linked to an acoustic signal. The entire scope of measurements during checks can be carried out alongside the flue gas measurement. The gas leak detection probe that can be connected to the instrument also has an adjustable alarm threshold; a warning tone is emitted if it is exceeded. The probe is also detected automatically and the results are shown as a graphic trend display in a dedicated menu. Thanks to the integration of the gas tightness test into the measurement menu, all relevant tests on gas pipes can be conducted without a separate measuring instrument the new testo 330 LL integrates the gas tightness test. All that is required for this is the connection of the pressure set for gas pipe tests to the testo 330 LL. The testo 330 LL guides the user through the entire measurement, and facilitates it by the graphic processing of the measurement data. 8
We measure it. The flue gas analyzer testo 330-1 LL at a glance The testo 330 LL is the reliable companion - whether in cases of malfunction or emergency, when monitoring legally set limit values, or in day-to-day maintenance work. New features of the testo 330 LL: Colour graphic display with 240 x 320 Pixel Graphic processing of measurement data New instrument design Instrument diagnosis function uses easy traffic light presentation to enable comprehensive error diagnosis, diagnosis of sensors and the call-up of instrument information such as the filling level of the condensate trap and the battery status Logger function for long-term measurements New measurement menus, e. g. Gas pipe test and solid fuel measurement Pressure measurement up to 300 mbar User-defined fuels Other features: Reduced follow-on costs thanks to LL sensors with 4 years guarantee Life expectancy up to 6 years (O 2 / CO) At least 1 sensor replacement is saved in the course of a normal working life Powerful Li-ion rechargeable battery - life: >6 h with pump running, no memory effect, no deep discharge Rechargeable battery can be charged separately and in instrument TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O 2, C, hpa and CO with H 2 -compensation WARRANTY: 4 YEARS* EN 50379-2 and 1. BImSchV A measuring instrument with great ease of communication: Powerful memory management: 500,000 readings IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer USB interface for data readout to a PC software ZIV (Central Guild Association) driver for all standard industry software packages optionally with Only for testo 330-2 LL In CO measurement, from 8.000 ppm, automatic dilution is carried out up to min. 30,000 ppm CO Integrated gas and draught zeroing without probe removal: The probe can remain in the flue during zeroing * Exceptions: Typical wearing parts: Rechargeable battery and thermocouple (1 year) NO/CO low sensor (2 years), filter 9
testo 330 LL The longlife sets with the new flue gas analyzer testo 330 LL In order to simplifiy selection, Testo has assembled special sets. These can of course be extended at any time from the wide selection of accessories. New testo 330-1 LL flue gas analyzer Illustratuion may differ from original The Longlife set for heating constructors and fitters testo 330-1 LL flue gas set H2 for heating constructors and fitters, incl. BLUETOOTH rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in instrument; combustion air temperature probe, length 190 mm; hose connection set for 0563 3371 70 separate gas pressure measurement; testo BLUETOOTH-printer with mains unit; basic system case flat; flue gas analyzer, length 300 mm, Ø 8 mm, Tmax. 500 C; with graphic display; version 2010 testo 330-1 LL testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and H2-compensated CO-sensor, incl. rech. battery and calibration protocol; graphic display 0632 3306 70 EN 50379-2 and 1. BImSchV New testo 330-2 LL flue gas analyzer The Longlife set for customer service and maintenance technicians testo 330-2 LL flue gas set H2 for customer service and maintenance technicans, incl. BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature 0563 3372 70 probe, length 190 mm; hose connection set for separate gas pressure measurement; Testo BLUETOOTH printer with mains unit; basic system case flat; flue gas probe; lenght 300 mm, Ø8 mm, Tmax. 500 C testo 330-2 LL testo 330-2 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and H2-compensated CO-sensor as well as integrated draught and gas zeroing, incl. rech. battery and calibration protocol; graphic display 0632 3307 70 EN 50379-2 and 1. BImSchV The Longlife set for inpectors testo 330-2 LL flue gas set; testo 330-2 LL (O2 and COH2), incl. BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; testo 308 smoke tester; soot pump holder; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 C; basic system case with double floor for instrument, probes and further accessories; with graphic display; verison 2010 0563 3372 72 The gas pipe test The Longlife set for service technicians and and inspectors with fine pressure probe testo 330-2 LL (O2 and COH2) flue gas set for service technicians and inspectors, incl.bluetooth, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; Testo BLUETOOTH printer with mains unit; easyheat software testo 330 for PC; USB connection cable, instrument-pc; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 C; fine pressure probe; capillary hoses; surface probe angled 90 C; connection cable surface probe; straight Pitot tube; heating check retrofit CD; basic system case with double floor for instrument, probes and further accessories The gas pipe test is integrated in the testo 330 LL (see ill.). Order accessory 0554 1213, and if not included in the set, accessory 0554 1203. 10 0563 3372 71
We measure it. Technical data Temperature Meas. range -40 to +1200 C ±0,5 C (0.0 to +100.0 C) ±0,5 % of mv (remaining range) 0.1 C (-40 to 999,9 C) 1 C (remaining range) Draught measurement Meas. range -9.99 to +40 hpa ±0.02 hpa or ±5% of mv (-0.50 to +0.60 hpa) (the greater value applies) ±0.03 hpa (+0.61 to +3.00 hpa) ±1.5% of mv (+3.01 to +40.00 hpa) 0.01 hpa Pressure measurement Meas. range 0 to 300 hpa ±0.5 hpa (0.0 to 50.0 hpa) ±1% of mv (50.1 to 100.0 hpa) ±1.5 % of mv (remaining range) 0.1 hpa O 2 measurement CO measurement (without H 2 compensation) Meas. range Adjustment time t 90 Meas. range Adjustment time t 90 0 to 21 Vol. % 0.1 Vol. % ±0.2 Vol. % 20 s 0 to 4000 ppm 1 ppm ±20 ppm (0 to 400 ppm) ±5% of mv (401 to 1000 ppm) ±10% of mv (1001 to 4000 ppm) 60 s CO measurement (H2-compensated) testo 330-2 LL only CO measurement (H 2 - compensated) solid fuel measurement Efficiency (ETA) Flue gas loss CO2 measurement Display range Measurement Adjustment time t 90 Option: CO low measurement Meas. range Option: NO measurement Ambient CO measurement (with CO probe) Gas leak measurement for combustible gases (with gas leak detection probe) Ambient CO 2 measurement (with ambient CO 2 probe) General Technical Data Meas. range Adjustment time t 90 Display range Meas. range Meas. range 0 to 120% 0.1% Meas. range 0 to 99.9% 0.1% Adjustment time t 90 Meas. range Adjustment time t 90 Meas. range 0 to 8000 ppm 1 ppm ±10 ppm or ±10% of mv (0 to 200 ppm) ±20 ppm or ±5% of mv (201 to 2000 ppm) ±10% of mv (2001 to 8000 ppm) 60 s 8000 to 30000 ppm (automatic dilution) 0 to 30000 ppm 1 ppm ±100 ppm (0 to 1000 ppm) ±10% of mv (1001 to 30000 ppm) 0 to CO 2 max 0.1 Vol. % ±0.2 Vol. % Digital calculation from O 2 40 s 0 to 500 ppm 0.1 ppm ±2 ppm (0.0 to 40.0 ppm) ±5% of mv (remaining range) 30 s 0 to 3000 ppm 1 ppm ±5 ppm (0 to 100 ppm) ±5% of mv (101 to 2000 ppm) ±10% of mv (2001 to 3000 ppm) 30 s 0 to 500 ppm 1 ppm ±5 ppm (0 to 100 ppm) ±5% of mv (>100 ppm) Approx. 35 s Adjustment time t 90 Range of indication 0... 10,000 ppm CH 4 / C 3 H 8 Signal Optical display (LED) audible display via buzzer Adjustment time t90 2 s Meas. range 0 to 1 Vol. % 0 to 10.000 ppm ±(50 ppm ±2% of mv) (0 to 5000 ppm) Adjustment time t 90 Approx. 35 s Memory 500.000 readings Weight 600 g (without rechargeable battery) Dimensions 270 x 90 x 65 mm Storage temp. -20 to +50 C Oper. temp. -5 to +45 C Display Colour graphic display with 240 x 320 pixels Power supply Rechargeable battery pack 3.7 V / 2.6 Ah Mains unit 6 V / 1.2 A Warranty Instrument/probe/gas sensors (O 2, CO) 48 months NO, CO low sensor 24 months Thermocouple and rech. battery 12 months 11
testo 330 LL We measure it. Quick order fax Qty. Qty. Qty. Qty. Measuring instruments without options testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and H2-compensated CO-sensor, incl. rech. battery and calibration protocol; graphic 0632 3306 70 display testo 330-2 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and H2-compensated CO-sensor as well as integrated draught and gas zeroing, incl. 0632 3307 70 rech. battery and calibration protocol; graphic display Measuring instruments with options testo 330-1 LL flue gas analyzer with long life gas sensors, inkl. O2-/CO-sensor; without H2-compensation, incl. rech. battery and calibration protocol; with graphic 0632 3306 display testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draught and gas zeroing; incl. O2-/CO-sensor; without H2-compensation, rech. battery 0632 3307 and calibration protocol; with graphic display Option: Fine draught measurement, 0.1 Pa, measurement range to 100 Pa (instead of the standard draught measurement) Option fine differential pressure measurement Option: NO sensor, meas. range 0 to 3000 ppm, 1 ppm resolution Option H 2 -compensated CO cell Option CO low sensor Option Bluetooth Sets testo 330-1 LL The Longlife set for heating constructors and fitters 0563 3371 70 testo 330-2 LL The Longlife set for customer service and maintenance technicians 0563 3372 70 testo 330-2 LL The Longlife set for inpectors 0563 3372 72 testo 330-2 LL The Longlife set for service technicians and and inspectors with fine pressure probe 0563 3372 71 Spare gas sensors O 2 sensor for testo 330-1 LL/-2 LL 0393 0002 CO sensor (without H 2 -compensation) for testo 330-1 LL/-2 LL 0393 0051 CO sensor, H2-compensated, 0 to 8000 ppm for testo 330-1 LL/-2 LL Spare COlow sensor, 0 to 500 ppm for testo 330-1 LL/-2 LL Spare NO sensor, 0 to 3000 ppm for testo 330-1 LL/-2 LL 0393 0101 0393 0103 0393 0151 Qty. Probes Modular flue gas probes, available in 2 lengths, incl. positioning cone, NiCr-Ni thermocouple, 2.2 m hose and particle filter Additional probes Dual wall clearance probe for O2 supply air measurement Flue gas probe; length 180 mm; Ø 8 mm; Tmax. 500 C; TÜV approval; probe 0600 9760 stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 300 mm; Ø 8 mm; Tmax. 500 C; TÜV approval; probe 0600 9761 stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 180 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni 0600 9762 thermocouple; 2.2 m hose and particle filter included Flue gas probe; length 300 mm; Ø 6 mm; Tmax. 500 C; probe stop; NiCr-Ni 0600 9763 thermocouple; 2.2 m hose and particle filter included Flue gas probe flexible; length 330 mm; Tmax. 180 C; short-term 200 C; 0600 9764 bending radius max. 90 C for measuring at inaccessible points; probe stop; NiCr-Ni-thermocouple; 2,2 m hose and particle filter included Probe accessories Probe shaft; length 180 mm; 8 mm; Tmax. 500 C 0554 9760 Probe shaft; length 180 mm; Ø 6 mm; Tmax. 500 C 0554 9762 Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 C 0554 9761 Probe shaft with probe stop, length probe shaft 335 mm, Tmax probe shaft 1000 C, Ø probe shaft 8 mm 0554 8764 Probe shaft modular, length 700 mm; incl conus; Ø 8 mm; Tmax. 1000 C 0554 8765 Probe shaft flexible; length 330 mm; Ø 10 mm; Tmax. 180 C 0554 9764 Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation 0554 5762 Probe shaft multi-hole; length 180 mm; Ø 8 mm; for mean CO calculation 0554 5763 Hose extension; 2.8 m; extension cable for probe and analyzer 0554 1202 Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 C 0554 3330 Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 C 0554 3329 0632 1260 Qty. Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm, for testo 330-1 LL/-2LL Upgrade COlow-sensor; resolution 0.1 ppm, Measuring range 0 -to 500 ppm, resolution 0.1 ppm, for testo 330-1 LL/-2 LL Retrofit BLUETOOTH interface Accessories Mains unit international 100-240 V AC / 6,3V DC for mains operation or battery charging in instrument, for mains operation or battery charging in instrument Spare battery 2600 ma Charger for spare battery Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries; for printing out measurements on site 0554 2151 0554 2103 0450 3338 0554 1096 0515 0107 0554 1103 0554 0549 testo 330-1/-2 LL / testo 350-S/-XL gas leak probe; 0 to +10000 ppm CH4 / C3H8 testo 330-1/-2 LL / testo 350-S/-XL / testo 400 ambient CO probe, for detecting CO in buildings and rooms; 0 to +500 ppm Connection cable 0430 0143 testo 330-1/-2 LL fine pressure probe 0632 3330 0632 3331 Ambient CO2 probe 0632 1240 Solid fuel set (probe shaft, adapter, upgrade CD) 0638 0330 0600 9765 BLUETOOTH printer set with wireless BLUETOOTH interface; incl. 1 roll thermal paper, rechargeable battery and mains unit 0554 0553 Combustion air temperature probe Spare thermal paper for printer; 6 rolls; permanent ink, permanent ink 0554 0568 Readout adapter for automatic furnaces testo 330-1/-2 LL 0554 1206 Adhesive pockets testo 330-1/-2 LL for printout, paper barcode labels; 50 off 0554 0116 Instrument cleaner, 100 ml 0554 1207 Combustion air temperature probe, immersion depth 300 mm 0600 9791 Combustion air temperature probe, immersion depth 190 mm 0600 9787 Combustion air temperature probe, immersion depth 60 mm 0600 9797 Additional temperature probes Mini ambient air probe 0600 3692 Smoke tester with oil; soot sheet; for measuring soot in flue gas 0554 0307 Hose connection set for separate gas pressure measurement testo 0554 1203 327 / testo 330-LL Pressure set for testing gas line testo 330-1/-2 LL version 2010 Differential temperature set consisting of 2 pipe clamp probes and adapter testo 330-1/-2 LL 0554 1213 0554 1204 Spare particle filter, 10 off 0554 3385 easyheat PC analysis software, shows measurement in form of diagrams, tables and manages customer data. Please order USB cable 0449 0047 separately. Full version easyheat and easyheat.mobile. Software package for PC and Pocket PC. 0554 3332 0554 1210 Quick-action surface probe 0604 0194 Connection cable 0430 0143 Subject to change without notice. USB connection cable testo 330-1/-2 LL / testo 335, instrument to PC 0449 0047 Qty. ISO calibration certificate/flue gas 0520 0003 Cases Basic system case testo 330-1/-2 LL for analyzer, probes and accessories 0516 3330 Basic system case testo 330-1/-2 LL with two levels for analyzer, probes and additional accessories Tools system case with tools section without content, can be interlocked to basic system case 0516 3331 0516 0329 Universal system case w/o pockets, can be interlocked to basic system case 0516 0331 Sender First name and surname Company Department Street, No. Postal code, city Date, signature 0981 7964/msp/AC/A/01.2012