PNSI Overview Commercial in Confidence COPYRIGHT 2010 1
PNSI Background www.pdsgrp.com Pacific Nuclear Systems was originally formed as a Washington Corporation in 1983.The company built up a reputation for quality nuclear support service and was subsequently taken public in 1985. The firm underwent a series of name changes and was finally subsumed into a subsidiary of the French group Trans-Nucleaire. The name Pacific Nuclear Systems more accurately reflects the business mission previously conducted by Pacific Development Services Inc [PDSI] and this name and LOGO was retained by principals of the current Pacific Nuclear Systems Inc. Commercial in Confidence COPYRIGHT 2010 2
PNSI Expertise Expertise in Nuclear Packaging & Nuclear Waste management solutions Focus on Energy Sector, with emphasis on Nuclear materials management and beneficial reuse of equipment systems Project Management & recommisisoing of plants world wide International network of clients Commercial in Confidence COPYRIGHT 2010 3
What Does PNSI Do? Speciality Package needs assessment, design, build & delivery. Supply of TRU-Shield licensed packages for the transport and ultimate disposal of High radiation level materials Provision of Provenance Recycle services for metals in the nuclear sector Developer and owner of IP for nuclear packages Bespoke consulting service in the nuclear waste management & packaging sector Business Development and Marketing in the nuclear sector Commercial in Confidence COPYRIGHT 2010 4
Products PNSI & BRM Partner TRU-Shield family of shielded containers NuPac family of ISO/DOT-CFR compliant packages RAD-Minder monitor suite TRANS-Dose monitor suite Specialty shielded package family Hypercompaction equipment Commercial in Confidence COPYRIGHT 2010 5
Bull Run Metal Fabricators and Engineers Inc. Specialist manufacturer of waste management and storage containers in support of the Nuclear industry The highest volume [nuclear] waste container manufacturer in the U.S. (37,000 containers in 30 months with 0 rejects) Extensive experience in Metals Decontamination for Beneficial Reuse of excess materials. Commercial in Confidence COPYRIGHT 2010 6
Clients/Customers/Partners Past & Present China National Nuclear Corporation Guangdong Nuclear Power Joint Venture Company Yibin Nuclear Fuel Element Plant Commercial in Confidence COPYRIGHT 2010 Baoji Non-ferrous Metals (China) 7
Provenance Recycle A system for the treatment, recycle and management of materials previously utilised in a radioactive environment into products for use in the nuclear industrial complex Note: Materials are decontaminated to radiological free release standards and are then tracked as they are converted in nonradiological facilities, into components for Nuclear Industry applications Commercial in Confidence COPYRIGHT 2010 8
Provenance Recycle AECL Canada [Chalk River Laboratories] Inject Finish Fill Commercial in Confidence COPYRIGHT 2010 9
AECL Provenance Recycle IAEA-TS-R-1 approved Product Identify Pb Regulatory NRC (USA) IAEA(UK/ Canada) Ship Melt/Process Inject QA & GAMMASCAN & Weight Confirmation Finish Fill Commercial in Confidence COPYRIGHT 2010 10
DSRL Provenance Recycle IAEA-TS-R-1 approved Products Identify Pb Regulatory NRC (USA) IAEA(UK/) Ship Melt/Process Inject QA & GAMMASCAN & Weight Confirmation Finish Fill Commercial in Confidence COPYRIGHT 2010 11
PNSI Provides Certificate of Provenance Recycle Certificate[s] of Provenance Recycle are provided to clients by PNSI The certificate includes the following detail: - Receipt Weight (Pb) Waste generated Net weight of recycled materials End use of material recycled Disposition of secondary waste Signed statement that this Pb was consumed/used in support of a government or commercial nuclear operation Commercial in Confidence COPYRIGHT 2010 12
NAC Cask[s] to China (2) Spent Fuel transport casks for Guangdong NPJV China Liaison with CNEIC and Everclean Contract awarded 2001, completed in 2003, ongoing support 2004 Commercial in Confidence COPYRIGHT 2010 13
Lead Trials BNG-UK Using PDSI-01949 Shipping containers[48 tons] PDSI-01949 Commercial in Confidence COPYRIGHT 2010 14
PNSI TRU-SHIELD Model # TS110-SS-IP3-BP-ILL2DSI Commercial in Confidence COPYRIGHT 2010 15
Tru-Shield Family (USA) TRU Shield Container (Catalog ID) Lead-Lined Thickness Empty Weight Height External Dimensions Diameter Internal Volume Container Design Loading Capacity Direct Loading 10-Gallon Pail 30-Gallon Drum 55-Gallon Drum (in.) (lbs.) (in.) (in.) (ft3) TS55-PB2 2 2330 34 ¼ 24 4.4 TS55-PB3 3 3108 34 ¼ 24 3.2 TS85-PB2 2 3137 39 ¼ 27 7.0 TS85-PB3 3 4236 39 ¼ 27 5.5 TS110-PB2 2 3850 43 31 10.9 TS146-PB3 3 6234 45 33 10.9 Container construction meets the requirements of Type A containers as defined in DOT Sections: 49CFR 173.24, 49CFR 173.410, 49CFR 173.411(a) and (b)(3) [IP-3], 49CFR 173.412, 49CFR 173.461, 49CFR 173.465, 49CFR 178.350 Commercial in Confidence COPYRIGHT 2010 16
Tru-Shield Family (International) TRU Shield Container (Catalogue ID) Lead- Lined Thickness Weight Tare/Gross NOTE: Max Payload 450 Kg [TS146 - Payload 635 Kg] External/Internal Dimensions Height Diameter Internal Volume Certificate of Approval of Package Design for the Carriage of Radioactive Material Package Design No. TS110-PB2 Container Design Loading Capacity Direct Loading 45 litres Drum (mm) (kg) (mm) (mm) (l) TS55-PB2 50 nom 1060/1510 870/680 610/480 123 TS55-PB3 75 nom 1410/1860 870/630 610/430 90 TS85-PB2 50 nom 1425/1875 997/810 686/560 196 TS85-PB3 75 nom 1920/2370 997/760 686/510 154 135 litres Drum TS110-PB2 50 nom 1750/2200 1092/912 788/660 305 TS146-PB3 75 nom 2830/3465 1145/880 840/660 305 205 litres Drum This is to certify that the Approving Authority has assessed the packaging and contents, as described under sections 3 and 5 of this document, as complying with the relevant requirements of the International Atomic Energy Agency Regulations for the Safe Transport of Radioactive Material, TS- R-1 (Reference 1) and the Statutory Instruments 2002 No 1093. By virtue of compliance with the IAEA regulations, this package also meets the requirements of the National and International Regulations stated in section 2 of this document. Approved Type: Industrial Type 2 and Type A (solids); Approved Modes of Transport: Road, air and sea; This Certificate is valid until: TS-R-1 (As Amended 2003) regulations are superseded Commercial in Confidence COPYRIGHT 2010 17
RAD-Minder RAD-Minder is a suite of monitors integrated into a robust small package that can be applied to monitoring and control of radioactive materials during transport and storage. Parameters currently monitored: Radiation levels Evidence of tamper Temperature Location/Current Condition Hydrogen (optional) RAD-Minder can interface with many compatible satellite systems Commercial in Confidence COPYRIGHT 2010 18
RAD-Minder Applications Monitor the following parameters on transport & long term storage of TRU-Shield Containers Radiation levels Evidence of tamper Temperature Location (Geo-Fence) Current Condition H2 (Optional) Commercial in Confidence COPYRIGHT 2010 19
RAD-Minder Screenshot Commercial in Confidence COPYRIGHT 2010 20
IP-1 [Strong Tight] Containers; Type A 1P2/3 Containers; Type AF Containers Commercial in Confidence COPYRIGHT 2010 21
PNSI /BRM Specialty Shielded Containers Commercial in Confidence COPYRIGHT 2010 22
Transfer Flask Commercial in Confidence COPYRIGHT 2010 23
Specialty Inner SS Canister Commercial in Confidence COPYRIGHT 2010 24
Shielded Box Container Commercial in Confidence COPYRIGHT 2010 25
In-house design, engineering and testing of Purpose built Containers Commercial in Confidence COPYRIGHT 2010 26
NuPac Container Family NuPac 20D NuPac 20 DD NuPac 20 T NuPac 20 TD NuPac 20 TDD NuPac 20 CB Doors one end Doors Both Ends Open Top-Always supplied with a Hard Top than can be positively secured in place Open Top with doors one end Open Top with doors both ends Cake Box design-load capacity extended Enhanced Security Commercial in Confidence COPYRIGHT 2010 27
NuPac Containers Modified ISO containers meeting 49CFR, part 173, Subpart I Class 7 Custom manufactured for PNSI to our own [49CFR 173.411(b)(1) & (b)(2) compliant] specifications Vents Capped and sealed Steel floors Compliant with ISO 1496 test 11 [lifting] Compliant with ISO 1161-1 [positioning fittings] Compliant with ISO 1496-1 Annex C [Pockets] Meets requirements for use in the transport of Hazardous Materials as defined by DOT part 173 of the Code of Federal Regulations. Commercial in Confidence COPYRIGHT 2010 28
NuPac 20-CB [Cake Box] Commercial in Confidence COPYRIGHT 2010 29
NuPac 20-DD Commercial in Confidence COPYRIGHT 2010 30
NuPac 20-DD Commercial in Confidence COPYRIGHT 2010 31
NuPac 20-CB Commercial in Confidence COPYRIGHT 2010 32
Lead Encapsulated Enclosure DOT 7A Type A certified. Stainless Steel inner and outer skin 2 [poured in place] lead shielding. Integral trunion lifting system to ASME B30.20 Commercial in Confidence COPYRIGHT 2010 33
Hypercompaction Pacific Nuclear Systems has come together with Hypercompaction Technology Inc., to offer a wide range of solutions for the volume reduction of very large items of process equipment requiring volume reduction in their as removed condition without prior preliminary size reduction. These systems are offered by PNSI as a "turn key" or lease complete with operations and/or maintenance support package Commercial in Confidence COPYRIGHT 2010 34
HCT-550 Specifically designed to be transported. The unit processes major sizes of piping, ducting, tanks, vessels, and other related process equipment with minimal pre-size reduction and associated costs. Commercial in Confidence COPYRIGHT 2010 35
HCT-1000 1000 ton shear capacity (3 x 36 plate) 400 ton compression box (96 x 34 x 216 ) 1000 ton compaction cap (36 x20 x <12 ) Material density 75-300 lbs/ft³ & Volume reduction 4:1 to 6:1 with Remote operation Commercial in Confidence COPYRIGHT 2010 36
HCT-1200 The HCT-1200 is optimized for miscellaneous loose materials, ducting, partitioning, electrical panels, cable, conduit, drums and B25 boxes. The HCT-1200 produces high density bales measuring 24" x 24" x variable length. Commercial in Confidence COPYRIGHT 2010 37
HCT-2200 700 ton Compression Box 1000 ton Compaction Capacity 2200 ton Shear Capacity High Density Bales 58 x 30 x <12 Material Density 150-350 lbs/ft 3 Commercial in Confidence COPYRIGHT 2010 38