Conveying and Separation Technology for preparation processes
Coarse Screening / Pre-Screening Index Machines with a proven track record Pre-Screening 2. Finger Screen 3. Finger Screen Grading 4. Waste Recycling Screen 5. Waste Recycling Screen 6. Waste Recycling Screen 7. Waste Recycling Screen Fine Screening 8. Flip Flow Screen Elastica 9. Flip Flow Screen Elastica 10. Flip Flow Screen Elastica and Miscellaneous Vibrating Conveyors 11. Pan Feeder 12. Vibrating Conveyors Finger Screen Pre-screening of treated commercial waste with a mesh size of 300 mm. Resonance Feeder Density Separator
Pre-Screening of commercial waste with a mesh size of 300 mm. Grading Screening Screens for recyclable material Pre-Screening For pre-screening broken glass. Refuse Incineration Slag Finger screen with double unbalanced motor for pre-screening of refuse incineration slag. Household Waste The proven screening solution for recyclable materials The SPALECK recyclable material screen is a circular vibrating screen driven by an AC motor. The impact area has a solid surface, which ensures good material flow, increases the service life of the screen panels and avoids blockages.
Shredder Light Fraction For grading shredder light fraction with a mesh size below 20 mm. Biomass Combined Systems for fine screening wood chips and feeding sorting devices in one unit. A dust sealing system can be provided on request. Vibrating Screen with special screening panel Used during preparation of biomass for fine and coarse screening with mesh sizes of 20 to 300 mm. Screening without tangling and without clogging. Waste Recycling Screen Complete screening unit consisting of a screening machine, sub-frame structure and chute in a compact design. Screening line for grading shredded electronic waste with a mesh size below 20 mm. Electronic Waste Waste Wood and Bulky Waste with upstream shredder and downstream hammer mill. Mesh sizes of 10 and 150 mm. Shredder Light Fraction Waste Wood Screening using a circular vibrating machine in accordance with the requirements of biomass heating power plants for energy generation or recycling.
Screening line for commercial and construction waste Fine Screening The solution for screening recyclable materials without clogging Screening line for roofing felt Flip Flow Screen Grading of difficult, sticky or wet materials into an infinite variety of sizes. Screening line for Green Dot waste Special Applications The relative movement of both screening frames creates a trampoline effect in the screening mats. The advantages of this effect are:...how it works High acceleration up to 50g in the screening mats Loosening up of the product 1 = PU Screening Mats Relative 2 = Support Frame Movement 3 = Dynamic Frame 1 1 2 2 3 3
Screening of coal dust and bentonite with a mesh size of less than 1 mm. Slag Single-Deck Flip-Flow Screen Combined with an eddy current separator for screening refuse incineration slag, with a mesh size of 4 mm. Screening machine for screening copper concentrate Double-Deck Flip Flow Screen for screening household waste with a grain size below 60 mm. Mesh sizes 20 + 8 mm. Separation of impurities (inert material, sand) from common household waste. Sand drainage with a mesh size of 1 mm. Screening Mats Flexible PUR screening mats to prevent blockages and sticking. Screening Out
Vibrating Conveyors Residual Waste Pan Feeder for construction waste with pre-separation by two grizzly screens Bunker discharge channels with inspection opening for conveying 700 tons of coke per hour. Feed Channel for un-shredded and pre-sorted commercial waste Feed Channels for the even distribution of waste, and other recyclable material. Individually designed spreaders support the even distribution on the relevant screening surface. Special non-adhesive linings prevent caking of wet material. Feed Channel and Hopper for commercial waste Commercial Waste Conveying and even distribution of electronic waste for the downstream sorting devices.
Resonance Conveyors Density Separators The SPALECK resonance conveyor has unbalanced motors or unbalanced exciters. Resonance conveyors are systems that vibrate two weights, producing a small vibration that is transmitted to cause a large oscillation of the feed trough (the resonator). Fixed, dynamic thrust springs are used to direct vibrations. The feed output can be adjusted for the application using a frequency convertor. Dynamic thrust springs compensate for the vibrations that are generated, and the microthrow principle improves transport. Resonance conveyors can be closed or open, they can be surface treated, and they can be equipped with additional components. SPALECK density separators are linear vibrating machines driven by two unbalanced motors. Density separators separate materials on the basis of their kinetic energy (ballistic trajectory) and differences in grain shape. Heavy and cuboidal materials fall downward on the slanted plates due to gravity. However light and flat materials are fed upward on the slanted plates. The combination of the inclination of the slanted plates, the adjustment of the vibration parameters and ballistic trajectory of the material can be used to achieve high quality separation. The density separators can be closed or open, and the slant tables can be surface treated.
MSW Commercial Waste Old Tires Biomass Roofing Felt Spaleck GmbH & Co. KG Robert-Bosch-Straße 15 46397 Bocholt/Germany Your North American Partner efactor3, LLC 11540 N. Community House Rd. Corporate Villa C, Suite C-250 Charlotte, NC 28277 T. 704.944.3232 877.801.3232 F. 704.944.3234 info@efactor3.com www.efactor3.com Phone +49 2871 2134-16 Fax +49 2871 2134-24 f-s@spaleck.de www.spaleck.de/f-s Expert Advice Testing Design Manufacturing Service 16-Seiter Förder- u. Separiertechnik US. (04-2012) ALL DATA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.