ACRYLIC-URETHANE ROOF COATING SYSTEMS SOPREMA

Similar documents
SYNTHETIC ROOF SOLUTIONS SOPREMA

WATERPROOFING PLAZA DECK BUILDING ENVELOPE SOLUTIONS

Self-Adhered. Products for the Entire Building Envelope. The Building Envelope Company

White Elastomeric Roof Coatings. The Potential to Reduce Energy Costs While Extending the Useful Life of Your Roof

BAYBLOCK HT/BAYBLOCK HT BASE

TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets

Firestone Asphalt Roofing Systems

Nutech Roof Coatings Nutech Paint Application Instructions & Guidelines Nutech Roof Coating Range of Products

SMARTCARE DAMP PROOF TECHNICAL PARAMETERS

Liquid-Applied Roof Solutions ACRYLIC & SILICONE COATINGS PRIMERS & ACCESSORIES

HYPERDESMO Polyurethane liquid membrane for waterproofing & protection, easy application. alchimica.com. Page 1/5 DESCRIPTION

MAKE ROOFS LAST LONGER

COOL BARRIER ROOF. High Solar Reflective Elastomeric Liquid Applied Roof Coating Water-Based for Big and Low Slope Roofs

Guideline Specification ACRYMAX ARS-1-C Reinforced Composite Elastomeric Membrane System for Concrete Roofs Fluid-Applied Roofing

EVALUATION REPORT Soprema, Inc. 310 Quadral Drive Wadsworth, OH 44281

TOPCOAT System Specifications Corrugated Transite Panels

ALSAN RS System Selection Guidelines

White Reflective Membranes and Coatings

Reducing Over-heating of Buildings by use of White Reflective Roof Coatings (WRRCs)

Liquid Membrane Systems Product Guide

Florida Department of Transportation

EFFISUS EASYREPAIR MEMBRANE

838 Coatings System Specification Single-Ply Restoration (838 SPR)

COOL ROOF MARKETS AND PRACTICAL EXPERIENCES. HEINZ MEIER, SIKA SERVICES AG MARCH 10, 2016 QUALICHeCK WORKSHOP, ATHENS

FireShield Restoration Specifications - EPDM

3,Rothwell Street, Timaru, South Canterbury. ; : Phone or

Henry #1 CHOICE OF PROFESSIONALS

900HA is a two component, hand-applied seamless liquid waterproofing that is typically foottrafficable

Pol-E-Base Modified Bitumen Roof System

PRODUCT DATA SHEET Sikalastic -641 Lo-VOC

Henry #1 CHOICE OF PROFESSIONALS

Section Fluid-Applied Roofing. Modified Bitumen Roof Preservation System Master Guide Specification

Section Fluid-Applied Roofing. EPDM Roof Preservation System Master Guide Specification

"WE CAN AGUASEAL THAT" AGUASEAL WATERPROOFING SYSTEMS A G U A B A S E

SECTION (LIGHT TRAFFIC DECKS OVER CONCRETE) Updated February 18, 2011

MULTI-PLY SYSTEMS. Product Line

TOPCOAT Product Catalog

Enduris * silicone roof coating

POLYGLASS U.S.A., INC. CORPORATE HEADQUARTERS

Centennial School District Section Material Specifications MATERIAL SPECIFICATIONS:

UltraPly TPO SA. Product Information. Description: Membrane Preparation: Method of Application: Item Description

Benefits of Cool Metal Roofs There are many benefits of owning a cool metal roof. Here are just a few to consider: What is A Metal Roof?

Copolymer BEFORE. Copolymer DURING. Copolymer AFTER. (800) TRI-CHEM 3

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

the professional s choice. tam-pro black and white cements & coatings. tamko.com

TOPCOAT Restoration Specifications Structural Concrete

Cool-R is one component, highly reflective, seamless, waterproofing coating for new and refurbished roofs. It can be use on flat and slope roofs.

PRODUCT DATA SHEET Sikalastic -501 Roofseal Plus

ASPHALT CEMENTS & COATINGS. Roof Mastics Protective Asphalt Coatings Asphalt Primers Aluminum Coatings

AVM System 500. Aussie Membrane 500

AVM System 500. Aussie Membrane 500

SOLAR COATING SYSTEMS ACRYLIC RENOVATION ROOF 4.5. Specification for Built-Up Roofing SUMMARY

SOLAR COATING SYSTEMS SYSTEM EMULSION /ACRYLIC. Specification for Built-Up Roofing MULSION/A 1.01 SUMMARY

HALIFAX HUMANE SOCIETY BOARDING AND GROOMING FACILITY SECTION STYRENE-BUTADIENE-STYRENE (SBS) MODIFIED BITUMINOUS

SMARTCARE P U M A G N U M

TOPCOAT Matrix Brochure

The Cool Roofing Solution

Traffic Bearing Membrane

WATERPROOFING WALLS FOUNDATIONS SOPRAJOINT PLUS PARKING DECKS BRIDGES ADDITIONAL EXPERTISE ROOFS WATERPROOFING MONOLITHIC EXPANSION JOINTS

JM EPDM SYSTEMS SINGLE PLY ROOFING

Technical Data Sheet NUKOTE SIL HS DESCRIPTION:

Building Energy Efficiency Standards Mandatory measures minimum features that all buildings must have regardless of compliance method used.

Henry #1 CHOICE OF PROFESSIONALS

SECTION SELF-ADHERING SHEET WATERPROOFING

B u l l e t i n SOPRABOARD MECHANICALLY FASTENED OVER POLYISOCYANURATE INSULATION BOARD (PARS) PARTIALLY ATTACHED (HYBRIDE) ROOFING SYSTEM

FireShield System Specifications Mineral Surface Cap, Mop Granule and Torch Granule APP Cap Sheets

UMA TECHNOLOGY. Flexible Methacrylate Waterproofing

ROOF RECOVERY SYSTEMS

***********************************************************************************

Next Generation Liquid Applied Roofing Membrane

EFFISUS ECORK INSULATION

DAYSONFAST Table of Contents

SECTION FLUID APPLIED ROOFING. (Commercial Standing Seam Metal Panels)

J&L Building Materials, Inc. Commercial Roofing

SECTION FLUID-APPLIED ROOFING

REVOLUTIONIZING WATERPROOFING

Data Sheet Eco-Smart Membrane WS M1

TAM-PRO CEMENTS & COATINGS

Packaging: Packaged in 5 gal. pails and 55 gal. steel drums. 260 gal. totes are available as a special order.

White Reflective Modified Bitumen Roofing Membrane CURE. technology

Benefits of Cool Metal Roofs There are many benefits of owning a cool metal roof. Here are just a few to consider: What is A Metal Roof?

INSTALLATION GUIDE SPECIFICATION

YOUR COMPLETE FLUID APPLIED ROOF RESTORATION SOLUTION. Apply With Confidence

Permaroof 500 Liquid Membrane application onto:- Corrugated asbestos roofs

Silicone Roof Coatings. Extend the Life of your Roof

COOL BARRIER RESIST* High Solar Reflective Water Resistant Flexible Dust Resistant Waterbased

Non-Residential Cool Roof Cost Summary

SECTION SBS-MODIFIED BITUMEN MEMBRANE ROOFING HEAT-WELDED

WPM WATERPROOFING MEMBRANE

PRODUCTS LIST. Apply with confidence.

EPDM SINGLE-PLY SYSTEM SUMMARY

Desmopol Application Guide for Corrugated Asbestos Roofs

SILICONE ROOF COATING RESTORATION (RCR) SYSTEM OVER METAL ROOF PANEL

EPDM ROOF RESTORATION

MEMBRANES SELF-ADHERED. For Commercial And Residential Roofing Systems

B u l l e t i n SOPRA-ISO MECHANICALLY FASTENED AND SOPRABOARD ADHERED SYSTEM (PARS) PARTIALLY ATTACHED (HYBRIDE) ROOFING SYSTEM

HYPERDESMO -ADY-E. One-component, transparent, glossy, aliphatic, elastic polyurethane liquid membrane. must be dry.

Product Guide Specification

Sarnafil Adhered Single-Ply Roofing Systems

IB PVC Single-Ply 50. Technical Data Sheet

Transcription:

R NOVA PLUS ACRYLIC-URETHANE ROOF COATING SYSTEMS SOPREMA

R Nova Plus is a waterborne, single-component roof coating comprised of a self-crosslinking modified acrylic-polyurethane dispersion. The polymer begins to crosslink upon application and continues to completion as it dries. R Nova R NOVA Plus is applied to existing roof systems to extend the life of the roof membrane by forming a seamless, flexible and aesthetically pleasing protective covering. During application, Alsan PolyFleece may be embedded into an R Nova Plus roof coating to provide a reinforced waterproof membrane. R Nova Plus resists extreme temperatures and ponded water and the white top coat provides excellent solar resistance and thermal emittance properties to the roof surface. BENEFITS AND ADVANTAGES OF R NOVA PLUS White top coat provides excellent solar radiative properties with attendant heat island, energy and occupancy comfort contributions. Low odor and low VOC High UV resistance Resistant to extreme temperature conditions Two-color, two ocat application enables full and proper coverage White roofs can contribute to the reduction of heat inside a building structure Resistant to ponded water conditons Excellent low temperature flexibility High strength and elasticity Custom color options available Utilized as a roof coating or as a reinforced waterproof membrane in certain applications.

PLUS R NOVA PLUS PHYSICAL PROPERTIES PROPERTY VALUE TEST METHOD VOC content 0.32 g/l EPA Method 24 Cold temperature flexibility (average) < -22 F (< -30 C) ASTM D 522 Tensile strength (average) > 1.6 MPa (> 227 psi) ASTM D 412 Elongation at break (average) > 500% ASTM D 412 Resistance to ponding water Pass ASTM D 2939 Resistance to water pressure > 0.5 atm (> 7.4 psi), 24 hr DIN 52123 Tear resistance > 130 N/cm (> 76 lbf/in) ASTM D 624 Solar reflectance (initial/weathered) 0.88 / 0.76 ASTM C 1549 Infrared emmitance (initial/weathered) Solar Reflective Index (SRI) (initial/weathered) UV resistance 0.87 / 0.88 ASTM C 1371 111 / 94 - Resistant to UV and influence of O 2 and ozone ASTM D 4799 Fungi resistance Pass ASTM G 21 R Nova Plus meets ASTM D 6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing. R Nova Plus is a CRRC rated product - product ID 0072-0046; license seller ID is 0072; classification: field applied coating Cool Roof Rating Council ratings are determined for a fixed set of conditions, and may not be appropriate for determining seasonal energy performance. The actual effect of solar reflectance and thermal emittance on building performance may vary. Manufacturer of product stipulates that these ratings were determined in accordance with the applicable Cool Roof Rating Council procedures.

INNOVATIVE BUILDING ENVELOPE SOLUTIONS INNOVATIVE BUILDING ENVELOPE SOLUTIONS ROOFING WATERPROOFING WALL SYSTEMS CIVIL ENGINEERING SOPREMA offers a comprehensive line of roofing, waterproofing, wall protection and civil engineering solutions, combining superior products and systems with decades of proven performance. Our solutions include industry leading SBS-modified bitumen membranes, polymeric and modified bituminous liquid applied membranes, and synthetic single ply PVC membranes. For applications as diverse as roofing, below grade waterproofing, plaza deck and balcony waterproofing, air and vapor barriers and bridge and parking structures, SOPREMA has the solution. Our relentless pursuit of technological advancement, sustainability and product quality has been known and respected around the world for over 100 years. SOPREMA USA 310 QUADRAL DRIVE WADSWORTH OH 44281 800.356.3521 PBF0314

R NOVA PLUS ORDER NO.: L-RNP001 (white) L-RNP009 (light blue) 1.800.356.3521 www.soprema.us TECHNICAL DATA SHEET QUANTITY (gal) 5 (18.9 L) AMBIENT TEMP 104 F 41 F (5-35 C) NEXT LAYER 4-6 hours at 68 F (20 C) NEXT LAYER (for asphaltic surfaces) 24 hours at 68 F (20 C) MAX. RECOAT 7 days at 68 F (20 C) DESCRIPTION R Nova Plus is a hybrid acrylic/urethane resin used in waterproofing existing aged modified bitumen and built-up roof membrane roof systems. R Nova Plus is also utilized in conjunction with a polyester reinforcement for fully reinforced liquid membrane applications. APPLICATION In a membrane recovery application, R Nova Plus is applied by two layers. R Nova Plus light blue coat is applied as a base layer with R Nova Plus White applied as the top layer. Product is applied with a brush, roller, squeegee or airless sprayer. R Nova Plus can also be installed in a fully reinforced configuration, utilizing Alsan PolyFleece polyester reinforcement. Refer to individual project specifications for information on number of layer applications. PACKAGING R Nova Plus is available in five (5) gallon pails. STORAGE & HANDLING Shelf life: 12 months in original unopened containers when stored at 77F (25C). Keep from freezing. For more information, refer to instruction on the label of the can and to relevant Material Safety Data Sheet (MSDS). PF041513

Page 2 of 2 R NOVA PLUS 1.800.356.3521 www.soprema.us TECHNICAL DATA SHEET COVERAGE RATES NON-REINFORCED COATING 1.5-2.0 gal / 100 ft 2 per layer FULLY REINFORCED APPLICATION 2.0 gal / 100 ft 2 (first layer) Alsan PolyFleece ST 1.0 gal / 100 ft 2 (subsequent layers) PHYSICAL PROPERTIES PROPERTY VALUE TEST METHOD VOC content 0.32 g/l - Solids content (average) 64% - Heat stability (average) > 248 F (> 120 C) ASTM D 2939 Cold temperature flexibility (average) < -22 F (< -30 C) ASTM D 522 Tensile strength (average) > 1.6 MPa (> 227 psi) ASTM D 412 Elongation at break (average) > 500% ASTM D 412 Resistance to ponding water Pass ASTM D 2939 Resistance to water pressure > 0.5 atm (> 7.4 psi), 24 hr DIN 52123 Water vapor permeance 1.87 perms ASTM D 1653 Tear resistance > 130 N/cm (> 76 lbf in) ASTM D 624 Solar reflectance (initial/weathered) 0.88 / 0.76 ASTM C 1549 Infrared emmitance (initial/weathered) 0.87 / 0.88 ASTM C 1371 Solar Reflective Index (SRI) (initial/weathered) 111 / 94 - UV resistance Resistant to UV and influence of O 2 and ozone ASTM D 4799 Adhesion Excellent to concrete, bituminous membrane, bitumen, aluminum, galvanized steel, asbestos, TPO, PVC, ASTM D 794 EPDM Fungi resistance Pass ASTM G 21 R Nova Plus meets ASTM D 6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing. R Nova Plus is a CRRC rated product - product ID 0072-0046; license seller ID is 0072; classification: field applied coating Cool Roof Rating Council ratings are determined for a fixed set of conditions, and may not be appropriate for determining seasonal energy performance. The actual effect of solar reflectance and thermal emittance on building performance may vary. Manufacturer of product stipulates that these ratings were determined in accordance with the applicable Cool Roof Rating Council procedures.