IVY STEEL & WIRE, INC. A MM, PCOUC3 COMPANY

Similar documents
The Clean Power Plan Avoiding Emissions and Economic Leakage. New Jersey Clean Air Council April 28 th 2016

March, Re: Source of Materials (steel) and Recycled Materials content LEED Program. To Whom it May Concern,

Reinforcing Steel (Uncoated and Epoxy Coated Bars)

The purpose of the REACH Regulation is to ensure a high level of protection of human health and the environment.

The purpose of the REACH Regulation is to ensure a high level of protection of human health and the environment.

COMPANY/FACILITY DATE(S) PRODUCT/SERVICE 2/20-21/2013 2/28/2013 3/4-14/2013 3/21-22/2013 4/3-4/2013 4/15-19/2013 5/6-7/2013 5/8-9/2013 6/3-14/2013

Toxic Reduction Act Gerdau Ameristeel Corporation Cambridge Mill Phase 2 Toxics Reduction Plan Summaries

INDUSTRY TECHNICAL NOTE

The 14 th Annual Waterways Symposium. Presented by: Jim Scharner The David J. Joseph Company November 2017

Merchant Bar Quality (MBQ) Steel Midlothian Steel Mill

EPOXY INTEREST GROUP EPOXY-COATED REINFORCING STEEL IN PARKING GARAGES

Toxic Reduction Act Gerdau Ameristeel Corporation Whitby Mill Phase 2 Toxics Reduction Plan Summaries

STEEL PRICE FORECASTS TO North America. December MEPS (International) ltd 263 Glossop Road Sheffield S10 2GZ

Structural Steel, Midlothian Steel Mill

CONCRETE REINFORCING STEEL

WHEN WASTE CEASES TO BE WASTE. The Case of Ferrous Scrap

Steel Price Forecasts To 2023 European Union

Activities Conditions Incentives

CONCRETE REINFORCING STEEL

CONCRETE REINFORCING STEEL

Certificate of Approval

TOTAL CMC Mill Location. Pre (a) Birmingham, Alabama 2.0% 89.2% 8.8% 98.0% Magnolia, Arkansas

Lecture 17 Alternative Charge Materials in EAF

Analysis of NBI Data for California Bridges

Non-Ambulatory Cattle and Calves

Pre-Audit Application Form

FHWA SHRP2 Overview & National Perspective. Steve Cooper SHRP2 Renewal Pavement Engineer

Raw Materials: The Changing Dynamic in the Supply Chain

Construction & Materials Outlook. March 9, 2009 Ken Simonson, Chief Economist AGC of America USA

B. GENERAL CONDITIONS

TOXIC REDUCTION PLAN MANGANESE. PowerCor Manufacturing a Division of Linamar Holdings

TOXIC REDUCTION PLAN COPPER. PowerCor Manufacturing a Division of Linamar Holdings

Product list PRODUCT CATEGORIES ACCEPTED AT THE EVENT

AASHTO/NTPEP 2012 ANNUAL MEETING Reinforcing Steel (REBAR) Technical Committee Agenda

Seeking a position where extensive experience will be further developed and utilized.

ABS Quality Evaluations

Certificate of Approval

INTRODUCTION. Here is what we found.

LaserSwiss Series Swiss Turning. Laser Cutting. Laser Welding. ONE MACHINE.

Gerdau Ameristeel Sayreville, Inc. Sayreville, NJ

Tack Coat Best Practices

Potential Damage from Asian Longhorned Beetle

QUALITY ASSURANCE FOR SHRP2 R06C TECHNOLOGIES

IBM ServicePac for Essential Support Maintenance Services

Advanced Fuel Cycles?

Toxics Substance Reduction Plan Summary For PM 10 Particulate Matter (CAS #NA-M09) PM 2.5 Particulate Matter (CAS #NA-M10)

Infrared Technology: Its Application and Benefit

Farm Computer Usage and Ownership

Milk Production, Disposition, and Income

Chapter Four. Process Selection

During 2011, Utah State University conducted a basic survey

Indiana Energy Status

PRIMARY IRON AND STEEL

MA Perspectives on Building Priorities for Climate and Energy Policy

AGN Arc Furnaces

Environmental Product Declaration. Long products of hot rolled structural non-alloy steel coming from electric furnace: ribbed bars.

November 2015 (NYSE: VSI)

MICRO - MODULE DRI PLANT

Tack Coat Best Practices. Greg Harder, PE Regional Engineer Asphalt Institute Tully, NY

C O N F I D E N T I A L

Renewable Energy Buyers Alliance (REBA): Accelerating GHG reductions through a buyer-led movement

Environmental Product Declaration

U.S. Wind Industry Fourth Quarter 2014 U.S. Wind Industry First Quarter 2016 Market Report Market Report

The Changing Landscape and Business Case for Water Loss Control

Tack Coat Best Practices

Compliance with this Routing Guide is mandatory. Noncompliance constitutes your agreement to pay all transportation and related costs.

Hamilton Works. Toxic Substance Reduction Plan Summary

Capacity of Refrigerated Warehouses

Indiana Energy Landscape

Climb Your Way To The World of Newer Opportunities

OF PIPEDREAMS AND PIPELINES

FHWA Cooperative Agreement Subtask. Longitudinal Joints Intelligent Compaction

t # 442 SAULT COLLEGE OF APPLIED ARTS & TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: METALLURGY CODE NO. MET SEMESTER: FOUR

11/07/2017. Tolerances & The Intolerant World of Structural BIM Coordination. Dave Merrifield. BIM and Tolerances. Speaker Twitter Handle.

Bank of the Sierra stays in the black with the help of Eaton UPS and service plan

Steel Making. Modern Long Product Manufacturing. Process Flow Chart

IBM ServicePac for Essential Support Warranty and Maintenance Options

Official Publication of The Tube & Pipe Association, Intl. In Print Online In Person

Shipping. Order Processing. Changes, Errors, and Reprints. Turnaround Time & Rush Orders

Industrial Visit Report

China Steel Yearbook 2010

NSSMC announces organizational Integration of steelworks

> ONCE UPON A TIME THERE WAS A LITTLE STEEL COMPANY THAT DARED TO EVOLVE

International Metals Recycling Seminar, Lisbon October 15, 2014

STEEL SECTOR OVERVIEW

STEEL SECTOR OVERVIEW

Barry Miles. Deputy Director, Reactor Refueling Naval Nuclear Propulsion Program

Agricultural Land Values

Mary. E. Torrence DVM, Ph.D., DACVPM National Program Leader, Food Safety

Tack Coat Best Practices

Compliance with this Routing Guide is mandatory. Noncompliance constitutes your agreement to pay all transportation and related costs.

State of the Network. EN2014 February 25, 2014

COST REDUCTION IN MANUFACTURING OF COUNTER WEIGHT AND ITS MATHEMATICAL CALCULATION METHOD

Update on Energy Efficiency Opportunities in the Commonwealth

Roles of the Fertilizer Industry in Nutrient Management Planning

PUBLIC POWER = + + LOCAL CONTROL LOW RATES HIGH RELIABILITY

The Bee Informed Partnership Management Survey Results (2011) Respondent Profile. BeeInformed.org

NCHRP 20 68A U.S. Domestic Scan Program. Domestic Scan 13 03

Potatoes Summary. September United States Department of Agriculture. National Agricultural Statistics Service.

SPECIALTY CONCRETE MIXTURES AND THEIR USE

Transcription:

Sep. 24. 209 2:43PM No.206t P. IVY STEEL & WIRE, INC. A MM, PCOUC3 COMPANY THE GORDON SUPPLY, Co. I fits) 527-8827 FAX (718) 527-895 Ivy Steel & Wire, Inc 503 Forest Rd. Hazie Township, PA. 18202 570-450-2090 ext 242 February 24, 2009 Recycled Content Welded Wire Fabric: Ivy Steel & Wire. INC located in Hazie Township, PA produces welded wire fabric for concrete reinforcement. The wire used is cold worked through a rolling process from rod purchased from several suppliers. The approximate recycled contents are 85% recycled material and 15% Pig Iron or HBI. The recycled material is broken into: 7W GOM SUPPLY, CO. 13I15MERRIcK BLVD Post consumer 78% 100 527-8827 FAX (718) 527-8916 Post industrial 22% Based on quality issues up to 15% Pig Iron or HBI may be added to dilute residual chemical concentration. Thank you for your inquiry into our product and the opportunity to serve your reinforcement needs. if you have any addition questions or requirements please contact me. Regards. Thom O'Konski tokonski@ivysteel.com Quality Technician MANUFACTURERS OF WIRE PRODUCTS AND WELDED WIRE FABRIC 503 FOREST ROAD - HUMBOLDT INDUSTRIAL. PARK - FIAZLETON. PA 182021 TELEPHONE 570.-450-2090 800-821-1323 - FAX 570450-2095

09/2412009 Thu 12:19 Name: Thomas Grimme Ph: 800-284-8518 ID: #1283611 Page 3of4 GE R DAt) AME RI ST EEL 7W GORDON SUPPLY, Co. 1(718) 527-8827 FAX (718) 527-89 April 15, 2009 Recycled Steel Content and Scrap Origin of Products Manufactured by Gerdau Ameristeel Gerdau Ameristeel uses the electric furnace and continuous casting process for the production of its basic steel that is further processed into fmished products. The overwhelming raw material for the electric furnace steelmaking process is recycled steel scrap. Recycled steel scrap consists of post-consumer and pre-consumer portions depending upon the sources and requirements for each steel plant. In addition to the recycled steel scrap, a small percentage of non-recycled raw materials, including pig iron, direct reduced iron and ferro-alloys, are used depending upon the metallurgical requirements. The following table presents the data for post-consumer, pre-consumer, total recycled content and other iron units by plant location for the year 2008. Post-Conmer Pre-Consumer Total Recycled Content % OthEf Ii on units and Ferro-afIoy Beaumont, TX 78 6 84 16 Calved City, KY 82 15 97 3 Cambridge, Ontario 71 28 99 1 Cartersville, GA 78 17 95 5 Charlotte, NC 93 6 99 1 Jackson TN 84 15 99 1 Jacksonville, FL 87 10 97 3 Joliet, IL 91 8 99 1 Knoxville, TN 97 2 99 1 Selkirk, Manitoba 95 4 99 1 Midlothian, TX 95 4 99 1 Perth Amboy, NJ 85 11 96 4 Petersburg, VA 97 2 99 1 Sand Springs, OK 98 1 99 1 Sayreville, NJ 93 6 99 1 St Paul, MN 90 9 99 1 Whitby, Ontario 77 20 97 3 Wilton, IA 90 9 99 1 All Mills 88 9 97 3 a -a LEED Point Credits for Recycled Content of Gerdau Ameristeel Products may be calculated from the data in the table and the following formulas: - 0. MR Credit 4.1-1 point (post-consumer + '/2 of pre-consumer) recycled content is 10 %. MR Credit 4.2-2 points (post-consumer + '/2 of pre-consumer) recycled content is 20 % 4221 W Bov Scout Blvd - Suite 600 Tampa. FL 33607 P.O 31325 Tampa. FL 33631-3328 i$13) 286-8353

09/2412009 Thu 12:19 Name: Thomas Grimrne Ph: 800-284-8518 ID: #1283611 Page 2 of4 RGERDAU AMERISTEEL TM Gerdau Ameristeel Steel Mills Scrap Origin THE GORDON SUPPLY, Co. I f718) 527-8827 FAX 718) 527-89 To Whom It May Concern: Each Gerdau Ameristeel Steel Mill has hundreds of scrap suppliers. We do not routinely track which suppliers provided the scrap for any particular batch of steel. However, in general, at least 80% to 90% or more of the scrap we use comes from suppliers located within approximately 200 miles of our mills. All Gerdau Ameristeel rebar, merchant bar and structural products are produced from 100% recycled scrap. Sincerely, Gerdau Ameristeel N! GO$DON SURLY, Co. I (71) 527-8827 FAX 718 527-89w Bhaskar Yalamanchili Director of Corporate Quality Eicutive Offices 4221 W. Boy Scout Blvd. - Suite 600 Tampa, FL 33607 P.O Box 31328 'Tamps. FL 33631-3328 (813) 286-8383

09/2412009 Thu 12:19 Name: Thomas Grimme Ph: 800-284-9518 ID:#1283611 Page 4 of 4 GERDAU AMERISTEEL fl1egordon SUPPLY, CO. 131-15 MERRCK BLVD TM April 15, 2009 I IVI$) 527-8827 FAX (718) 527-896 LEED Credit 5 for regionally manufactured materials and regionally acquired raw materials is based on location and distance from the project site to point of recovery of raw materials and the manufacturing facility. Gcrdau Aineristeel's own steel recycling facilities provide approximately 40% percent of all the recycled steel scrap used in our steel mills. The individual Gerdau Arneristeel mills select scrap based upon metallurgical needs and costs. In general, it is estimated that at least 80-90% or more of the steel scrap used by Gerdau Ameristeel comes from locations within 200 miles of the producing mill and 95-100% within 500 miles of the producing mill. Sincerely, M GODN SURLY, CO. 1 (718) 527-8827 FAX (718) 527-8916 Bhaskar Yalamanchili Director of Corporate Quality byalamanchiti@gerdauamen'steel.com 813-207-2394 4221 W. Bow Scout Blvd. -Suite 6(M) Tampa. FL 33607 P.O. Box 31328 Tampa. FL 33631-3328 (513) 286-8353

R1 GERDAU AMERI5TEEL TM THE GORDON SUPPLY, CO. 1 (718) 527-8827 FAX (718) 527.89F' April 15, 2009 Recycled Steel Content and Scrap Origin of Products Manufactured by Gerdau Ameristeel Gerdau Ameristeel uses the electric furnace and continuous casting process for the production of its basic steel that is further processed into finished products. The overwhelming raw material for the electric furnace steelmaking process is recycled steel scrap. Recycled steel scrap consists of post-consumer and pre-consumer portions depending upon the sources and requirements for each steel plant. In addition to the recycled steel scrap, a small percentage of non-recycled raw materials, including pig iron, direct reduced iron and ferro-alloys, are used depending upon the metallurgical requirements. The following table presents the data for post-consumer, pre-consumer, total recycled content and other iron units by plant location for the year 2008. Plant Location Post-Consumer Pre-Consumer Total Recycled Content % Other Iron units and Ferro-alloys Content % Beaumont, TX 78 6 84 16 Calvert City, KY 82 15 97 3 Cambridge, Ontario 71 28 99 1 Cartersville, GA 78 17 95 5 Charlotte, NC 93 6 99 1 Jackson, TN 84 15 99 1 Jacksonville, FL 87 10 97 3 Joliet, IL 91 8 99 1 Knoxville, TN 97 2 99 1 Selkirk, Manitoba 95 4 99 1 Midlothian, TX 95 4 99 1 Perth Amboy, NJ 85 11 96 4 Petersburg, VA 97 2 99 1 Sand Springs, OK 98 1 99 1 Sayreville, NJ 93 6 99 1 St Paul, MN 90 9 99 1 Whitby, Ontario 77 20 97 3 Wilton, IA 90 9 99 1 All Mills 88 9 97 3 -a 01 c -< -1-a 4-m 1 LEED Point Credits for Recycled Content of Gerdau Ameristeel Products may be calculated from the data in the table and the following formulas: MR Credit 4.1 - I point (post-consumer + V2 of pre-consumer) recycled content is 10 % MR Credit 4.2-2 points (post-consumer + V2 of pre-consumer) recycled content is 20 % 4221 W. Boy Scout Blvd. - Suite 600 Tampa, FL 33607 P. 0. Box 31328 Tampa, FL 33631-3328 (813) 286-8383

THE GORDON SUPPLY, CO. GERDAU AMERISTEEL TM 1(718)527-8827 FAX (718) 527-8955 April 15, 2009 LEED Credit 5 for regionally manufactured materials and regionally acquired raw materials is based on location and distance from the project site to point of recovery of raw materials and the manufacturing facility. Gerdau Ameristeel's own steel recycling facilities provide approximately 40% percent of all the recycled steel scrap used in our steel mills. The individual Gerdau Ameristeel mills select scrap based upon metallurgical needs and costs. In general, it is estimated that at least 80-90% or more of the steel scrap used by Gerdau Ameristeel comes from locations within 200 miles of the producing mill and 95-100% within 500 miles of the producing mill. Sincerely, THE GORDON SUPPLY, Co. 1(718) 527-8821 FAX (718) 527-8916 Bhaskar Yalamanchili Director of Corporate Quality byalamanchili@gerdauameristeel.com 813-207-2394 4221 W. Boy Scout Blvd. - Suite 600 Tampa, FL 33607 P 0. Box 31328 ' Tampa, FL 33631-3328 (813) 286-8383