Aluminum Mill Products

Aluminum Mill Products Aluminum Angle, Channel, Pipe Fittings, Pipe, Rod, Bar, Sheet, Plate, Coil & Tubing ALASKAN COPPER & BRASS COMPANY

History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its major activities was forming and brazing pipe and pipe fittings made from copper, brass and bronze, primarily for use in the Pacific Northwest shipbuilding industry. Beginning in the 920 s, many of the area s growing process industries, such as pulp and paper, which had relied on wood stave and cast iron as corrosion resistant materials for their tanks and piping, welcomed the development of a new weldable alloy, silicon bronze. This alloy had special advantages in weight, cost and corrosion resistance. Alaskan Copper Works participated in the transition to this innovative metal and in the development of the welding techniques necessary for its proper fabrication. In the 90 s, alloys with even better corrosion resistance, such as the austenitic stainless steels, became available and quickly came into general use not only in the pulp and paper industry but also in the other process industries then beginning to develop, such as Alaskan Copper Works yesterday petrochemical and food processing. Again, Alaskan Copper Works participated in the application of these new, advantageous materials and in the development of the welding and fabricating procedures required to maximize their usefulness. Over the intervening years, improvements in our manufacturing capacities have seen the standard lengths of most pipe sizes increase from 4 feet to 0 feet and then to 20 feet. Dieformed smooth-flow elbows began to be made in small sizes and gradually advanced to include larger sizes and many radii and wall thicknesses. Other advances over the years have led to tees being made with smooth-drawn outlets, the development of many available choices in the types of stub ends for different services and our manufacturing of pipe and fittings to advanced specifications and in exotic alloys, including our qualification to produce fittings for the nuclear power industry. As a result, today s customers of the Stainless Products Division of Alaskan Copper Works benefit from the accumulated experience of one of the nation s largest organizations devoted exclusively to the manufacturing of pipe and pipe fittings in stainless steels, high-nickel alloys, duplex stainless alloys, copper-nickel alloys, aluminum, titanium, zirconium, copper and other weldable corrosion resistant alloys. Alasan Copper Works today.

Your Source for Corrosion Resistant Alloys Alaskan Copper & Brass Company combines the largest and most diverse inventory of alloys in the Pacific Northwest with the very latest in material processing equipment. Our goal is to continue to be a true service center for our customers. We provide accurate, rapid quotation services and the ability to deliver material on time, preprocessed if necessary to our customer s exact specifications. Northwest Owned and Operated Alaskan Copper & Brass Company has been owned and operated by the same family since 9. In our Seattle, Portland and Canadian distribution facilities, the emphasis has always been on personal service and long term relationships with our customers. Contract terms, credit terms and special stocking programs can be negotiated locally, with people who understand the Northwest market and its customers. State of the Art Processing Equipment Preprocessing of customer material has become more important every year due to more exacting quality requirements in most industries. Alaskan has responded to that demand by investing heavily in new processing equipment. Minimize scrap and save inventory costs! Let Alaskan do your material processing. Customer Service our Specialty Our sales staff is backed up by one of the most extensive information systems in the metals industry. Each salesperson has instantaneous access to all of our over,000 stocking items through a touch-input computer screen. Questions regarding the status of your order can be answered immediately, without a return call. We value your time as much as you do. This catalog covers sizes, weights and specifications of material for the commercial, military, marine, waste-water, petro-chemical, pharmaceutical, beverage and power industries. Call one of our informed and experienced salespeople for the rapid quotation response you expect in these competitive times. ALASKAN COPPER & BRASS COMPANY P.O. Box 5067 P.O. Box 546 225 North Road Portland, Oregon 97208-5067 Seattle, Washington 9824-546 Coquitlam, B.C. VK V7 2440 Southeast Raymond (97202-468) 22 Sixth Avenue South (984-205) Canada (50) 28-77 (206) 62-5800 (604) 97-6620 Fax: (50) 28-6849 Fax: (206) 82-75 Fax: (604) 97-088 Toll Free: (800) 552-766 Toll Free: (800) 552-766 Toll Free: (800) 667-5456 E-MAIL: acbpdx@alaskancopper.com E-MAIL: acbsea@alaskancopper.com E-MAIL: acbvcr@alaskancopper.com

ALASKAN COPPER PROCESSING CAPABILITIES Coil Processing Aluminum, brass, copper, copper-nickel and stainless steel coil stock from.00 through thick and up to 96 wide are levelled and cut to length on Alaskan s custom-made line. Shearing Precision shearing from light gauge to thick copper alloy material, thick stainless steel and up to thick aluminum. Sheet or plate can be sheared in 20 foot continuous lengths using an adjustable backgauge. Plate up to thick can be sheared in lengths up to 48. Alaskan s Cut-To-Length facility allows for efficient use of sheet and plate material. Sawing Abrasive sawing of copper alloy material and stainless steel though 4 thick to close tolerance for rectangles and squares. Metal carbide sawing of aluminum plate through 6 thick. Plate up to 96 x 68 can be sawed in full lengths. Plate up to 2 foot long can be sawed with a +/-.005 inch tolerance. Splice Welding Simultaneous welding from both sides by automatic gas tungsten-arc process to achieve any required sheet size from stock material. The weld procedures and welder qualifications conform to Section IX of the ASME Boiler and Pressure Vessel Code. The resulting weld has minimum distortion and minimum reinforcement to allow easy forming such as rolling. Material up to 20 feet in length may be welded together. Order the size that is needed, not just standard sizes. Plasma Burning Computerized automatic plasma burning of any shape can be accomplished. All corrosion resistant alloys can be cut up to thick. Up to 96 x 240 material can be accommodated. A water table is utilized to keep slag and the heat affected zone to a minimum. Do-All Sawing Automatic multiple cutting up to 6 by 6 bar or 6 diameter round bar, rod or tubing. Complex shapes are cut by computerized plasma cutting tables. Aluminum wet pump pressure vessel used to transfer fish from a ship s hold to the dock. Custom Fabrication Custom fabrication of most industrial shapes can be performed by our affiliated company, ALASKAN COPPER WORKS. Work will be performed on a complete package basis including material or on a labor only basis utilizing the customer s material. The entire engineering and drafting department of ALASKAN COPPER WORKS is at your disposal, offering computerized design of heat transfer equipment, pressure vessels and tanks. 2

Table Showing Fractions, Decimals, Centimeters & Millimeters / 6 / 6 5 / 6 7 / 6 Fractional Inch 5 7 9 5 5 7 9 5 7 9 2 2 25 27 29 Decimal Inch Centimeters Millimeters Millimeters Centimeters Decimal Inch.056.096.969.0969.0.556.02.0792.798.498.50.5.0469.9.906.8906.89.5469.0625.588.5875 4.2875.429.5625.078.984.9844 4.6844.468.578.098.28 2.8 5.08.508.598.094.2779 2.778 5.478.548.6094.25.75.750 5.8750.588.625.406.57.579 6.279.627.6406.56.970.9688 6.6688.667.656.79.466 4.656 7.0656.707.679.875.476 4.7625 7.4625.746.6875.20.559 5.594 7.8594.786.70.288.5558 5.556 8.256.826.788.244.5954 5.95 8.65.865.744.250.650 6.500 9.0500.905.750.2656.6746 6.7469 9.4469.945.7656.28.745 7.48 9.848.984.782.2969.754 7.5406 20.2406 2.024.7969.25.798 7.975 20.675 2.064.825.28.84 8.44 2.044 2.0.828.48.87 8.7 2.4 2.4.848.594.929 9.28 2.828 2.8.8594.75.9525 9.5250 22.2250 2.22.875.906.992 9.929 22.629 2.262.8906.406.02 0.88 2.088 2.02.906.429.072 0.756 2.456 2.42.929.475..25 2.825 2.8.975.45.5.5094 24.2094 2.42.95.4688.9.906 24.606 2.46.9688.4844.20 2.0 25.00 2.500.9844.500.270 2.7000 25.4000 2.540.000 Fractional Inch 7 5 7 9 9 4 2 4 45 2 47 49 25 5 5 27 55 57 29 59 6 6 9 / 6 5 / 6 / 6 7

Aluminum A system for designating wrought aluminum and wrought aluminum alloys was established by the Aluminum Association. Specific limits for chemical compositions to which conformance is required are provided by applicable product standards. Wrought Aluminum and Aluminum Alloy Designation System A system of four-digit numerical designations is used to identify wrought aluminum and wrought aluminum alloys. The first digit indicates the alloy group as follows: Aluminum, 99.90% minimum and greater... XXX Aluminum alloys grouped by major alloying elements Copper (Cu)... 2XXX Manganese (Mn)... XXX Silicon (Si)... 4XXX Magnesium (Mg)... 5XXX Magnesium & Silicon... 6XXX Zinc (Zn)... 7XXX Other elements... 8XXX Unused series... 9XXX Basic Temper Designations F as fabricated. Denotes metal that has been fabricated to ordered dimensions without any attempt on the part of the producer to control the results of either strain-hardening operations or thermal treatments. There are no mechanical property limits, and the strength levels may vary from lot to lot and from shipment to shipment. O annealed. Applies to wrought products that have undergone a thermal treatment to reduce their mechanical properly levels to their minimums. Often described as dead soft metal. W solution heat-treated. An unstable temper applying to certain of the heat-treatable alloys that, after heat treatment, spontaneously age harden at room temperature. Only when the period of natural aging is indicated (W hr for example) is this a specific and complete designation. H strain-hardened. Applies to those wrought products which have had an increase in strength by reduction through strain-hardening, or cold working, operations. The H is always followed by two or more digits. T thermally treated to produce tempers other than F, O or H. Applies to those products which have had an increase in strength due to thermal treatments, with or without supplementary strain-hardening operations. The T is always followed by one or more digits. Subdivisions of Basic Tempers Subdivision of H Temper-Non-heat-treatable alloys H strain-hardened only. Applies to products which are strain-hardened or cold worked to obtain the desired strength level without supplementary thermal treatments. The number following this designation indicates the degree of strain-hardening. H2 strain-hardened and partially annealed. Applies to products strain-hardened or cold worked more than the desired final amount and then reduced in strength to that desired level by partial annealing. The number following this designation indicates the degree of strain-hardening remaining after the partial annealing operation. H strain-hardened and stabilized. Applies to products in the magnesium-aluminum class which will age-soften at room temperature after strain-hardening. These products are strain-hardened to the desired amount and then subjected to a low temperature thermal operation which results in a stable but slightly lower tensile strength and improved ductility. The number following this designation indicates the degree of strain-hardening remaining after the stabilization treatment. The digit following the designation H, H2 or H indicates the degree of strainhardening as follows: H_ - hard H_6 - hard H_2 - hard H_7-7 hard H_ - hard H_8 - full hard (Approx. 75% reduction after full anneal) H_4 - hard H_9 - extra hard (limited to certain alloys and/or product forms) H_5-5 hard Subdivisions of T Temper-Heat-Treatable Alloys T cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition. Usually associated with extruded products and limited to certain of the 6XXX series alloys. T2 cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition. Usually associated with cast products. T solution heat-treated, cold worked, and naturally aged to a substantially stable condition. The working serves to increase the strength (T4 + cold work) T4 solution heat-treated and naturally aged to a substantially stable condition. T5 cooled from an elevated temperature shaping process and artificially aged. Usually associated with extruded products in certain of the 6XXX series alloys. (T + artificial age) T6 solution heat-treated and artificially aged. A stable temper. (T4 + artificial age) T7 solution heat-treated and overaged/stabilized. Applies to alloy products which are thermally over-aged after solution heat-treatment to carry them beyond the point of maximum strength to provide control of some special characteristic. A stable temper. T8 solution heat-treated, cold worked and artificially aged. A stable temper. (T + artificial age) T9 solution heat-treated, artificially aged and cold worked. A stable temper (T6 + cold work) T0 cooled from an elevated temperature shaping process, cold worked and artificially aged. Usually associated with cast products. A stable temper (T2 + artificial age) Aluminum Alloys 00 About 20% higher in strength than 00 but retaining an excellent workability rating. May show some slight discoloration when anodized, but reacts well to mechanical and organic finishings. Is easily welded and brazed, but soldering is limited to the torch method. Like 00, tends to be gummy when machined, but will perform somewhat satisfactorily in the higher tempers with the proper set-up and maximum speeds. Typical end uses include food and chemical handling equipment, appliance components, truck-trailer roofing, heat exchangers, pipe jacketing and lawn furniture components. 5052 For many years, until the advent of 508 and 5086, this alloy was the highest strength non-heat-treatable alloy commercially available. Although easily welded, it is not recommended for brazing and soldering applications. Excellent corrosion resistance, particularly in marine applications, and adapts to most mechanical and finishing processes although the heavier anodic films may take on a yellowish cast. Fair machining with proper set-up. Typical end uses include fuel tanks, truck-trailer side panels, small boat hulls, truck cabs, bumpers, storage tanks and pressure vessels. 5086 Has excellent corrosion resistance and weldability. Can be anodized for increased corrosion resistance, but does not lend itself to decorative applications. Not meant to be a machining alloy, but can be machined fairly well with proper applications. Because of its relatively high magnesium content, the workability rating would be only fair. Typical end uses are marine craft, containers, railroad cars, structurals and elevator cars. 606 Very good corrosion resistance and finishability plus excellent weldability and a strength level approximating that of mild steel, this is a popular general-purpose alloy. Machinability is good and, in the annealed state, its workability carries a high rating, staying at the good level if heat-treated without aging. Typical end uses are aircraft landing mats, large and small marine vessels, structural architectural parts, storage tanks and highway signs. 606 A heat-treatable alloy developed exclusively for the extrusion industry and the most important alloy in the magnesium silicide group. Its as-extruded finish is quite good making it satisfactory for many applications without any additional work. Lends itself to comparatively intricate sections making it the leading architectural extrusion alloy. Also finds use in some decorative applications, furniture tubing and ladder parts. 4

Aluminum Mill Products Aluminum Angle 5086 Structural Angle... 7 5456 Structural Angle... 8 606 Structural Angle... 9 606 Architectural Angle... 0 Aluminum Channel 5086 American Standard Channel... 5086 Aluminum Association Channel... 606 American Standard Channel... 2 606 Aluminum Association Channel... 606 Architectural Channel... Aluminum Pipe Fittings ButtWeld Elbow... 4 ButtWeld Tee... 4 Threaded Couplings... 5 Flanges... 6 Aluminum Pipe 606 Extruded Structural Pipe... 7 606 Extruded Structural Pipe... 8 5086 Drawn Seamless Pipe... 9 606 Extruded Seamless Pipe... 20 Aluminum Rod & Bar 5086 Round Rod... 2 5456 Round Rod... 2 606 Round Rod... 22 5086 Rectangular Bar... 2 5456 Rectangular Bar... 2 606 Rectangular Bar... 24 5086 Square Bar... 26 606 Square Bar... 26 5086 Tee Bar... 27 606 Tee Bar... 27 Aluminum Marine Shapes 606 Hull Stiffener... 28 606 G Shape... 28 606 Half Pipe and Tube... 28 606 Pen Board... 29 606 Pen Board... 29 606 Pen Board... 29 Aluminum I-Beam 606 Aluminum Association I Beam... 0 606 American Standard I Beam... 0 Aluminum Flat Rolled Products 5052 Sheet, Plate & Coil... 508 Sheet, Plate & Coil... 5086 Sheet, Plate & Coil... 4 58 Sheet, Plate & Coil... 5 5456 Sheet, Plate & Coil... 6 00 Sheet & Plate... 6 00 Sheet & Plate... 6 05 Sheet & Plate... 6 606 Sheet & Plate... 7 606 MIL-DLT 2262 Ballistic Armor Plate... 8 5005 Flattened Expanded Sheet... 8 00 Bright Tread Plate & Coil... 9 5086 Diamond Tread Plate... 9 5052 Bright Tread Plate & Coil... 9 606 Diamond Tread Plate... 9 5052 Embossed (FTQ) Tread Plate... 9 Aluminum Cast Products Cast Tooling Plate... 40 Aluminum 5

Aluminum Mill Products continued Aluminum Tubing 606 Structural Tubing... 4 606 Seamless Tubing... 4 5086 Seamless Tubing... 42 5086 Square Tubing... 42 606 Square Tubing... 4 606 Square Tubing... 4 606 Rectangular Tubing... 44 606 Rectangular Tubing... 44 6

Aluminum Angle 5086-H Structural Angle Specifications: ASTM B 22 Stocked in 25 foot lengths Leg (A) Leg (B) Thickness (C) Radius (R ) Radius (R 2 ) Lbs Ft Lbs/Length Part Number.25.094.274 6.850 6008.25.094.500 2.500 6009.88.25.42 0.525 6006 / 6.88.25.608 5.200 604.88.25.794 9.850 6022 2 / 6.88.25.78 7.950 668 2 2.250.25.577 4.425 600 2 2 / 6.250.25.8 20.825 6048 2 2.250.250.088 27.200 6056 2 2.250.25.558 8.950 6064 2 2.250.25.72 4.00 6072 2 / 6.2.88.040 26.000 6699 2.2.250 2.005 50.25 6080.2.250.84 20.850 6098 / 6.2.250.254.50 6020.2.250.646 4.50 602.2.250 2.4 60.775 60229 4 2.75.250.690 42.250 6704 4 4.75.250 2.24 55.850 6027 4 4.75.250 4.4 0.25 60245 6 6.500.75.09 82.725 6025 6 6.500.75 6.69 65.475 6026 7

Aluminum Angle 5456-H Structural Angle Specifications: ASTM B 22 Stocked in 25 foot lengths Leg (A) Leg (B) Thickness (C) Radius (R ) Radius (R 2 ) Lbs Ft Lbs/Length Part Number.25.094.280 7.000 66097.25.094.50 2.750 6690.88.25.40 0.750 660965 / 6.88.25.620 5.500 665224 2 / 6.88.25.70 8.250 67895 2 2 / 6.250.25.850 2.250 67887 2 2.250.250.40 28.500 654485 2 2.250.260.500 667496 2 2.250.25.400 5.000 66748 2.400 5.000 667446 2.2.250 2.050 5.250 668874.2.250.84 20.850 6098 / 6.2.250.254.50 6020.2.250.690 42.000 66742.2.250 2.4 60.775 66660.2.20 80.750 668882.680 42.000 668905 4 2.75.695 42.75 668840 4.990 49.750 667454 4.250 2.90 7.250 66759 4 4.75.250 2.280 57.000 667420 4 4.80 84.500 669 4 4.75.250 4.50 2.575 667462 5 2.09 57.725 667488 5.49 8.725 667527 5 5 4.280 07.000 668866 5 5 5.580 9.500 668858 6 4 2.898 72.450 668824 6 4 4.20 08.000 667470 6 4 5.578 9.450 66750 6 6 5 8.52 208.800 66762 8

Aluminum Angle 606-T6 Structural Angle Specifications: ASTM B 22 Stocked in 25 foot lengths Leg (A) Leg (B) Thickness (C) Radius (R ) Radius (R 2 ) Lbs Ft Lbs/Length Part Number.25.094 0.280 7.000 664 / 6.25.094 0.400 0.000 672.25.094 0.50 2.750 680.88.25 0.50 8.750 698 / 6.88.25 0.50 2.750 640.88.25 0.660 6.500 64.88.25 0.40 0.750 6429 / 6.88.25 0.620 5.500 647.88.25 0.80 20.250 6445 2 / 6.88.25 0.7 8.0 564892 2.88.25 0.960 24.000 6576 2 2.250.25 0.589 4.725 645 2 2 / 6.250.25 0.850 2.250 646 2 2.250.250.0 27.750 6479 2 2.250.25.590 9.750 6487 2 2.250.25.260.500 6592 2 2 / 6.250.25.070 26.750 6495 2 2.250.25.400 5.000 6500 2 2.250.25 2.047 5.75 476578 / 6.250.88 0.97 24.275 229662 2 / 6.250.88.070 26.750 6607 2.2.88.400 5.000 665 2 5 / 6.2..727 4.75 678675 2.2.250 2.046 5.50 507866 / 6.2.250.280 2.000 658.2.250.680 42.000 6526.2.250 2.470 6.750 664.2.250.29 82.25 429660.75.250.987 49.675 49629.75.250 2.928 7.200 4874 4 2.75.250.70 4.250 404872 4.75.250.990 49.750 66 4 2.75.250.84 46.075 678667 4.75.250 2.90 7.250 6649 4 4.75.250 2.280 57.000 6542 4 4.75.250.80 84.500 685 4 4.75.250 4.50 2.575 48 5.250.250 2.09 57.725 50754 5.75.2.49 8.725 4067 5 5.500.75 4.24 05.850 509575 5.75.2 4.96 09.900 4220 9

Aluminum Angle 606-T6 Structural Angle (continued) Specifications: ASTM B 22 Stocked in 25 foot lengths Leg (A) Leg (B) Thickness (C) Radius (R ) Radius (R 2 ) Lbs Ft Lbs/Length Part Number 6 4.500.75 4.20 08.000 6657 6 4.500.75 5.578 9.450 552578 6 6.500.75 5.9 27.975 509096 6 6.500.75 6.754 68.850 42050 6 6.750.75 9.95 247.875 66508 8 8.500.75 9.4 228.525 599295 606-T52 Sharp Corner Architectural Angle Specifications: ASTM B 22 Stocked in 6 foot lengths Leg (A) Leg (B) Thickness (C) Lbs Ft Lbs/Length Part Number. 2.096 466696. 2.620 * 58775.206.296 668.244.904 5445.280 4.480 2469.56 5.696 46670.56 5.696 08086 / 6.28.488 67058.4 6.896 0809 / 6.622 9.952 624545 2.4 0.775 ** 6699 2.496 2.400 592887 2 2.58 9.296 22974 2 2 / 6.860.760 66958 2 2.092 7.472 49756.570 9.20 55904.726 27.66 6698 * 20 Ft lengths ** 25 Ft lengths 0

Aluminum Channel 5086-H American Standard Channel Specifications: ASTM B 22 Stocked in 25 foot lengths Size (A) Web (B) Flange (C) Thickness (D) Radius (R ) Radius R 2 ) Lbs Ft Lbs/Length Part Number.250 2.000.70.270.00.47 56.000 669626 *.258.498.70.270.00.70 4.600 67020 4.80.580.80.280.0.846 46.50 6765 5*.90.750.90.290.0 2.6 46.20 79895 5.90.750.90.290.0 2.6 46.20 658659 0.240 2.600.240.40.40 5.280 05.600 75425 2.00 2.960.280.80.70 7.250 8.500 68897 *Stocked in 20 ft lengths 5086-H Aluminum Association Channel Specifications: ASTM B 22 Stocked in 25 foot lengths Size (A) Web (B) Flange (C) Thickness (D) Radius (R) Lbs Ft Lbs/Length Part Number 2.0.000.0.00 0.577 4.225 659760 2.88.500.88.88.02 20.640 75944 4.90.750.290.250 2. 46.000 79900 6*.70 2.500.290.00 2.84 70.20 7998 7.70 2.750.290.00.20 80.500 76960 7.20.500.80.0 4.75 7.875 7756 8.90.000.50.00 4.47 0.675 76952 *Stocked in 20 ft lengths

Aluminum Channel 606-T6 American Standard Channel Specifications: ASTM B 22 Stocked in 25 foot lengths Size (A) Web (B) Flange (C) Thickness (D) Radius (R ) Radius R 2 ) Lbs Ft Lbs/Length Part Number.70.40.70.270.00.47 5.425 6908.258.500.70.270.00.729 4.225 696.56.600.70.270.00 2.074 5.850 46686 4.80.580.80.280.0.846 46.50 6924 4.247.650.80.280.0 2.6 54.025 692 4.20.720.80.280.0 2.504 62.600 466824 5.90.750.90.290.0 2.6 57.900 45946 5.25.885.90.290.0.08 77.700 6885 5.472 2.00.90.290.0.975 99.75 42222 6.225.950.200.00.20.002 75.050 6958 6.4 2.00.90.00.20.6 90.775 6966 6.48 2.60.200.00.20 4.498 2.450 5849 7.20 2.0.20.0.0.54 88.525 57598 7.4 2.90.20.0.0 4.22 05.800 545246 8.250 2.290.220.20.0 4.252 06.00 286892 8.0 2.40.220.20.0 4.75 8.775 584949 8.487 2.50.220.20.0 6.484 62.00 50966 0.240 2.600.240.40.40 5.278.950 545220 2.00 2.960.280.80.70 7.45 85.75 50279 2.87.050.280.80.70 8.69 25.980 50862 2.50.70.280.80.70 0.74 259.50 49842 2.62.292.280.80.70 2.0 26.978 727602 5.400.400.400.500.240.708 292.700 65756 5.76.76.400.500.240 7.282 42.050 6620 2

Aluminum Channel 606-T6 Aluminum Association Channel Specifications: ASTM B 22 Stocked in 25 foot lengths S ize (A) W eb (B) F lange (C) T hickness (D) Radius (R) Lbs Ft Lbs/ Length Part Number 2. 0.000. 0. 00 0.577 4.425 562604 2. 70.250. 260. 50.07 26.775 22975. 0.500. 200. 250.5 28.75 422. 70.750. 260. 250.597 9.925 286884 4. 50 2.000. 20. 250.78 4.450 4057 4. 90 2.250. 290. 250 2. 58.275 46682 5. 50 2.250. 260. 00 2.22 55.00 427 5. 90 2.750. 20. 00.089 77.225 4229 6. 70 2.500. 280. 00 2.84 70.850 44795 6. 20.250. 50. 00 4.00 00.750 29980 7. 20.500. 80. 0 4.75 7.875 5528 8. 90.000. 50. 00 4.47 0.675 42867 8. 250.750. 40. 50 5.789 44.725 484864 9. 20.250. 50. 50 4.98 24.575 509088 0. 250.500. 40. 50 6.6 5.400 42859 0. 0 4.250. 500. 400 8.60 209.000 509070 2. 290 4.000. 470. 400 8.274 206.850 5578 2. 50 5.000. 620. 450.822 295.550 46840 606 -T52 Sharp Corner Architectural Channel Specifications: ASTM B 22 Stocked in 6 foot lengths Size (A) Web (C) Flange (B) Lbs/Ft Lbs/Length Part Number.25 0.00 4.800 4586.25 0.4 6.608 6704.25 0.526 8.46 672.25 0.487 7.792 502662.25 0.67 0.92 465860.25 0.50 8.60 6576 2.25 0.564 9.024 58 2.25 0.787 2.592 55288 2.25 2 0.86 7.260 * 6720 2.250 2.670 6.740 ** 678.25 0.78.488 229769 * 20 ft. Length. **22 ft. Length.

Aluminum Pipe Fittings 606-T6 Fittings An assortment of threaded, socket welding and buttweld fittings area available upon request. Please inquire. Long Radius 90 Buttweld Elbow Schedule 40 Nominal Pipe Size Schedule 80 Outside Diameter Wall Lbs/Ea Part Number 0.840.00 0.060 7227.050. 0.066 724.5. 0.2 7269.660.40 0.98 7285.900.45 0.0 708 2 2.75.54 0.560 724 2 2.875.20.089 740.500.26.750 766 4.000.226 2.20 4927 4 4.500.27.00 782 Nominal Pipe Size Outside Diameter Wall Lbs/Ea Part Number 0.840.47 0.076 674702.050.54 0.08 67470.5.79 0.58 674728.660.9 0.290 67476.900.200 0.7 674744 2 2.75.28 0.660 674752 2 2.875.276.20 674760.500.00 2.65 674778 4.000.8 2.900 674786 4 4.500.7 4.498 674794 Buttweld Tee Schedule 40 Nominal Pipe Size Outside Diameter Wall Lbs/Ea Part Number.5. 0.260 56477.900.45 0.680 56485 2 2.75.54.040 5649.500.26 2.470 564208 4

Aluminum Pipe Fittings 606-T6 Fittings An assortment of threaded, socket welding and buttweld fittings are available upon request. Please inquire. Threaded Full Couplings Nominal Pipe Size A B / 9 8 5 / 6.020.025 9 8 5 / 2 / 6 5 / 6 9 / 6 5 / 6.05.060.00.5 Sch 40 Sch 80 Lbs/Ea Lbs/Ea Sch 40 Part Number 0 2544 0 74 0 70 Sch 80 Part Number 0 0.250 756 4025 0 0.40 772 402529 0 0.480 798 40257 2 / 6 0.20 0.880 74 52552 2 2 5 / 6 0.0 0.970 747 405585 2 2 2 9 / 6 0.500.50 745 40559 2 5 / 6 2 7 0.70 2.0 758 52560 / 6 / 6.05 2.00 7479 408892 4 4 / 6 7 / 6 2.040 7495 Threaded Half Couplings Nominal Pipe Size A B / 9 8 9 / 6 5 / 6 2 / 6 2 2 5 / 6 2 2 2 9 / 6 Lbs/Ea 5 / 6 0 0 050 068 5 25 20 Sch 40 Part Number. 46059. 24224. 249. 2485. 26697. 56690. 50270 5

Aluminum Flanges 606-T6 Aluminum Raised Face Slip-On Flanges Class 50 ANSI B6.5 Nominal Pipe Size O Q R X Bolt Holes Bolt Circle B Y Weight Part Number 4 9 / 6 2 5 / 6 4-5.6 / 6.66 694956 5 / 6 2 7 2 9 / 6 4-5 7.95 7.99 694972 2 6 5 / 6 4-4 2.44.65 694964 2 7 7 4 9 / 6 4-5 2.94 2.65 694998 7 5 / 6 5 4 4-6.57 / 6 2.97 695009 4 9 5 / 6 6 / 6 5 5 / 6 8-7 4.57 5 / 6 4.29 69507 6 8 7 9 / 6 8-7 9 6.72 9 / 6 5.6 695025 8 0 5 9 / 6 8-7 8.72 9.24 6950 0 6 / 6 2 2 2-4 0.88 5 / 6.20 69504 2 9 5 4 2-7 2.88 2 / 6 20. 695059 6

Aluminum Pipe 606-T6 Schedule 40 & 80 Extruded Structural Pipe 606 - T6 Schedule 40 Specifications: ASTM B 22 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number 0.675.090.54.080 60295 0.840.09.294 5.880 5978.050..9 7.820 5986.5..58.620 5994.660.40.786 5.720 6005.900.45.940 8.800 60 2 2.75.54.264 25.280 060 2 2.875.20 2.000 40.000 602.500.26 2.620 52.400 609 4.000.226.50 6.000 6047 4 4.500.27.70 74.600 6055 5 5.56.258 5.050 0.000 420860 6 6.625.280 6.556.20 259756 8 8.625.22 0.079 20.580 4275 0 0.750.65 4.004 280.080 58806 2 2.750.406 8.56 70.20 5288 606 - T6 Schedule 80 Specifications: ASTM B 22 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number.840.47.84 7.680 584290.050.54.520 0.400 4906.5.79.75 5.020 268064.660.9.07 20.740 405488.900.200.256 25.20 268072 2 2.75.28.77 4.740 60 2 2.875.276 2.650 5.000 496895.500.00.547 70.940 588040 4.000.8 4.25 86.500 582549 4 4.500.7 5.8 0.660 42049 5 5.56.75 7.88 4.760 42094 6 6.625.42 9.884 97.680 55845 8 8.625.500 5.009 00.80 560458 0 0.750.59 2.550 47.000 6227 2 2.750.687.00 660.200 665606 7

Aluminum Pipe 606-T52 Schedule 40 & 80 Extruded Structural Pipe 606-T52 Schedule 40 Specifications: ASTM B 22 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number.840.09.294 5.880 60.050..9 7.820 628.5..58.620 66.660.40.786 5.720 644.900.45.940 8.800 652 2 2.75.54.264 25.280 660 2 2.875.20 2.000 40.000 678.500.26 2.620 52.400 686 4.000.226.50 6.000 694 4 4.500.27.70 74.600 6209 6 6.625.280 6.556.20 4209 8 8.625.22 9.867 97.40 427 0 0.750.65 4.004 280.080 46854 606-T52 Schedule 80 Specifications: ASTM B 22 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number 0.840.47.84 7.680 59682.050.54.520 0.440 6754.5.79.75 5.020 6275.900.200.256 25.20 628 2 2.75.28.77 4.740 629 2 2.875.276 2.650 5.000 606.500.00.547 70.940 420797 4 4.500.7 5.8 0.660 670287 6 6.625.42 9.884 97.680 42086 8

Aluminum Pipe 5086-H2 Schedule 40 & 80 Drawn Seamless Pipe 5086-H2 Schedule 40 Specifications: WW-T-700/5 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number 0.675.090.5.020 5240 0.840.09.294 5.880 5920.050..9 7.820 598.5..58.620 5946.660.40.786 5.720 5954.900.45.940 8.800 5962 2 2.75.54.264 25.280 5970 2 2.875.20 2.000 40.000 5988.500.26 2.620 52.400 5996 4.000.226.50 6.000 57250 4 4.500.27.70 74.600 52007 5 5.56.258 5.050 0.000 545092 6 6.625.280 6.556.20 572528 8 8.625.22 0.079 20.580 585474 0 0.750.65 4.004 280.080 69524 2* 2.750.406 8.56 222.92 69540 5086-H2 Schedule 80 Specifications: WW-T-700/5 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number 0.840.47.84 7.68 6585.050.54.520 0.400 686.5.79.75 5.020 5205.660.9.07 20.740 5202.900.200.256 25.20 520 2 2.75.28.77 4.740 52049 2 2.875.276 2.650 5.000 54542.500.00.54 70.860 5258 4.000.8 4.25 96.500 585490 4 4.500.7 5.8 0.660 545084 5 5.56.75 7.88 4.760 545440 6 6.625.42 9.884 97.680 57256 8 8.625.500 5.009 00.80 585482 0* 0.750.59 22.252 267.024 6952 *Stocked in 2 ft lengths. 9

Aluminum Pipe 606-T6 Schedule 40 & 80 Extruded Seamless Pipe 606-T6 Schedule 40 Specifications: ASTM B 24 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number.05..9 7.85 665282.5..58.668 665290.66.40.786 5.786 66505.90.45.940 8.878 665 2 2.75.54.264 25.85 6652 2 2.875.20 2.000 40.67 6659.500.26 2.620 52.68 66547 4 4.500.27.70 74.9 66555 8 8.60.22 0.079 202.420 66558 0 0.750.65 4.004 28.247 6846 606-T6 Schedule 80 Specifications: ASTM B 24 Stocked in 20 foot lengths Nominal Pipe Size Outside Diameter Wall Lbs Ft Lbs/Length Part Number.05.54.520 0.44 6656.5.54.75 5.08 6657.660.9.07 20.826 66589.900.200.256 25.225 66597 2 2.75.28.77 4.885 665402 2 2.875.276 2.650 5.22 66540.500.00.547 7.26 665428 4 4.500.7 5.8 04.092 66546 8 8.60.500 5.009 0.4 66558 2 2.750.687.00 662.940 665606 *Stocked in 2 ft lengths. 20

Aluminum Rod & Bar 5086-H Round Rod Specifications: ASTM B 22 Stocked in 4 foot lengths Size Lbs/Ft Lbs/Length Part Number.0.82 66089.226 2.76 629977.508 7.2 629985.904 2.656 62999 2.04 28.462 60009 2.67 50.568 6007 2 5.652 79.00 60025 8.8.876 600.077 58.466 6004 4 4.469 202.776 60059 5 22.648 2.246 60067 6 2.555 455.504 60075 9 7.287 879.444 675986 09.20.040 64502 5456-H Round Rod Specifications: ASTM B 22 Stocked in 2 foot lengths Size Lbs/Ft Lbs/Length Part Number.20 2.760 67544 5.6 4.2 669595.520 6.240 67552.44 7.6 67560 2.078 24.96 67578 2

Aluminum Rod & Bar 606-T6/T65 Round Rod Specifications: ASTM B 22 Stocked in 2 foot lengths Size Lbs/Ft Lbs/Length Part Number Size Lbs/Ft Lbs/Length Part Number.058.700 7926 2.989 55.868 4897 5 / 6.090.085 4772 4 4.780 77.46 5457.0.560 54 4 7.02 204.280 5455.20 2.760 400462 4 8.690 224.280 2667 5.60 4.20 550 4 20.840 250.080 5825.58 6.26 568 5 2.560 282.720 5465 7.706 8.472 576 5 25.458 05.496 46997.922.064 584 5 27.920 5.040 4725.69 4.028 49725 5 0.600 67.200 548.40 7.60 592 6.200 98.400 5499.746 20.952 4768 6 6.079 42.948 485080 2.074 24.888 5407 6 9.000 468.000 48774 5 2.49 29.268 47284 7 46.60 55.920 49259 2.80.960 2666 7 5.000 66.000 5504 7.247 8.964 502450 8 60.20 722.760 552 2.686 44.22 545 8 66.700 800.400 4685 2 4.77 57.252 445755 9 74.780 897.60 4686 2 5.20 62.520 4765 9 8.57 000.284 562 2 7 / 6 4.490 65.880 50958 0 92.20 07.840 46879* 2 5.760 69.20 542 0 94.640 5.680 467090 2 5 6.65 76.80 4675 0 0.796 96.64 46887* 2 6.985 8.820 467529.700 40.400 46895* 8.00 99.600 54 2 2.96 29.60 46900* 9.756 7.072 46757 4 80.99 085.60 476594* 0.520 26.240 5049 6 26.0 47.980 678*.550 8.600 5449 20 69.264 2400.26 65596* * Random Length 22

Aluminum Rod & Bar 5086 - H Rectangular Bar Specifications: ASTM B 22 Stocked in 20 foot lengths, Sharp Corners Thickness (A) Width (B) Lbs/Ft Lbs/Length Part Number Thickness (A) Width (B) Lbs/Ft Lbs/Length Part Number.44 2.880 659045.648 2.960 670465 2.288 5.760 65905 2.864 7.280 65740 / 6.28 4.60 6468.296 28.920 65758.28 6.560 6565 4.760 5.200 66755 2.47 8.740 6564 6 2.590 5.800 6850 2.547 0.940 670457.580.600 68552.656.20 6565 2.50 2.000 68560.288 5.760 65669.70 4.600 68578.42 8.640 65677 4 2.00 46.000 68586.504 6.048 67267* 5 2.880 57.600 6704 2.576.520 65685 6.460 69.200 68594 2.720 4.400 6569 5.080 2.600 6856.864 7.280 65708.080 2.600 68926.008 20.60 6576 2 2.04 57.600 670407 4.52 2.040 65724 6.728 4.560 6572 * Stocked in 2 FT lengths 5456 - H Rectangular Bar Specifications: ASTM B 22 Stocked in 2 and 20 foot lengths, Sharp Corners Thickness (A) Width (B) Lbs/Ft Lbs/Length Part Number.44.728 67820 / 6.28 6.560 666856* / 6 2.440 8.800 67900* 2.588 7.056 6675 2.588.760 654524*.864 0.68 654752 4.70 2.400 667640* 6.728 4.560 668997* 5 / 6.080 2.600 666864*.296 5.552 654760 4.760 5.200 66754*.764 2.68 6689 5 2.470 7.640 67008 *Stocked in 20 FT lengths 2

Aluminum Rod & Bar 606 - T65 Rectangular Bar Specifications: ASTM B 22 Stocked in 2 foot lengths, sharp corners Thickness (A) Width (B) Lbs/Ft Lbs/ Length Part Number Thickness (A) Width (B) Lbs/Ft Lbs/ Length Part Number 0.0.20 2622 0 4.40 52.920 64948 0.47.764 558 0.449 5.88 4286 0.87 2.244 5546 0.590 7.080 5740 0.220 2.640 047 0.749 8.988 458 2 0.294.528 5554 0.880 0.560 5758 0.450 5.400 4505.029 2.48 466 4 0.600 7.200 4504 2.70 4.040 5766 / 6 0.68 2.020 507670 2.470 7.640 5774 0.220 2.640 5562.760 2.20 5782 0.282.84 424 2.060 24.720 28880 0.0.960 5570 2.205 26.460 705888 2 0.44 5.292 5588 4 2.50 28.200 5790 2 0.560 6.720 42 5 2.998 5.976 4578 0.66 7.92 5596 6.50 42.60 5805 4 0.902 0.824 496976 8 4.704 56.448 555495 0.50.800 45225 0 5.880 70.560 688997 0.22 2.652 46687 2 7.056 84.672 689008 0.294.528 560 5 0.749 8.988 474 0.67 4.404 569.0.26 49060 0.44 5.292 5627 2.500 8.000 482 2 0.587 7.044 565 2.870 22.440 58 2 0.662 7.944 605907 2.250 27.000 657768 2 0.75 8.820 286907 2.57 0.876 642860 0.88 0.572 564 4 2.940 5.280 642878.029 2.48 46499 2 8.820 05.840 6445 4.70 4.040 565.882 0.584 4740 5.470 7.640 4685.26.52 449660 6.764 2.68 5669.2 5.876 4749 0 2.940 5.280 677742 2.760 2.20 582 5 / 6 0.67 4.404 725294 2 2.200 26.400 589 2 0.74 8.808 62742 2.650.800 5847.0.22 59756.087 7.044 705862 4.468 7.66 597544 4.600 4.200 5855 0.22 2.652 46695 5 4.40 52.920 505000 0.0.960 466400 6 5.292 6.500 25542 0.44 5.292 5677 8 7.056 84.672 555500 0.56 6.756 440 0 8.820 05.840 4944 0.66 7.92 5685 2 0.584 27.008 62929 2 0.88 0.572 569.470 7.640 277550 2.00.200 5708.799 2.588 0449.20 5.840 576 2 2.99 26.788 25249 4.760 2.20 572 2.000 6.000 25684 5 2.205 26.460 40267.50 42.60 4047 6 2.646.750 2554 4 4.700 56.400 40597 24

Aluminum Rod & Bar 606 - T65 Rectangular Bar (continued) Thickness (A) Width (B) Lbs/Ft Lbs/ Length Part Number Thickness (A) Width (B) Lbs/Ft Lbs/ Length Part Number 5 5.880 70.560 294780 2 4.20 49.440 690449 6 7.060 84.720 586 6.74 74.090 50565 7 8.22 98.789 622705 2 2 5.880 70.560 487066 8 9.600 55.200 50762 7.99 86.88 4455 0.760 4.20 69972 4 9.600 5.200 446 2 4.2 69.40 509672 5.760 4.20 552049 2.205 26.460 486094 6 4.400 72.800 447 2.57 0.876 705870 8 8.86 225.792 78 2.000 6.000 25642 2 4.760 4.20 4685 2.675 44.00 47654 5 4.700 76.400 462799 4.500 54.000 490 6 7.640 2.680 468745 4 6.000 72.000 4405 4 4.99 72.788 445640 6 8.820 05.840 52489 5 7.999 25.988 445658 2.599 4.88 44 6 2.68 254.06 445666 2 4.40 52.920 46876 5 20.580 246.960 55205 5.400 64.800 442 5 22.68 27.656 55202 4 7.200 86.400 449 6 24.690 296.400 5520 5 8.820 05.840 58872 4 5 2.520 282.200 56422 6 0.800 29.600 4447 6 28.220 8.700 49552 7 2.48 48.76 60986 25

Aluminum Rod & Bar 5086 - H Square Bar Specifications: ASTM B 22 Stocked in 4 foot lengths Thickness (A) Lbs/Ft Lbs/Length Part Number 0.294 4.02 68748 0.662 9.070 68756.76 6.0 68764.88 25.200 68772 2.646 6.290 68780 2 4.704 64.50 68798 2 7.500 00.800 6880 0.800 24.46 688 4 9.99 258.050 68829 5 0.000 40.200 6887 6 42.6 580.60 68845 8 7.728 02.000 6885 606 - T65 Square Bar Specifications: ASTM B 22 Stocked in 2 foot lengths Thickness (A) Lbs/Ft Lbs/Length Part Number 0.074 0.888 59964 0.65.980 48875 0.294.528 280448 5 0.47 5.676 426 5 0.47 8.54 5072* 0.662 7.940 255095.76 4.0 25500.88 22.050 420022 2.22 26.676 65829 2.646.750 2558 2 4.704 56.450 25526 2 7.500 90.000 4540 0.800 29.600 4558 5.000 80.000 4660 4 9.99 20.88 445674 5 0.000 60.000 552 6 42.6 508.02 49078 * 8 Ft 26

Aluminum Rod & Bar 5086 - H Structural Tee Bar Specifications: ASTM B 22 Stocked in 25 foot lengths Stem (A) Flange (B) Thickness (C) Thickness (D) Thickness (E) Radius (R) Lbs/Ft Lbs/Length Part Number / 6.29.29.88.69 7.25 60279.29.29.88.870 2.750 6560 2 2.2.2.240.25 0.875 60287.47.47.2 2.77 67.90 66097 606 - T6 Structural Tee Bar Specifications: ASTM B 22 Stocked in 25 foot lengths Stem (A) Flange (B) Thickness (C) Thickness (D) Thickness (E) Radius (R) Lbs/Ft Lbs/Length Part Number / 6.29.29.88.707 7.675 6665 2 / 6.65 6.0 6586 2 2.2.2.240.260.500 667 2 2.07 2.675 585725 2 2 5 / 6.75.75.250.909 47.725 587.949 48.725 594449 2.77 67.925 664 4 4.48.48.500.740 9.500 52455 27

Aluminum Marine Shapes 606 - T6 Hull Stiffener Stocked in 25 foot lengths Height (A) Width (B) Thickness (C) Lbs/Ft Lbs/Length Part Number 2.88.00 2.500 20980 606 - T52 Extruded G Shape Stocked in 25 foot lengths Size (A) Thickness (C) Lbs/Ft Lbs/Length Part Number.475.875 46775 606 - T6 Sch 40 Half Round Pipe and Tube Nominal Pipe Size Outside Diameter Wall Lbs/Ft Lbs/Length Part Number 2* 2.75.54 0.645 6.0 5992 2 * 2.875.20.092 27.00 5085.500**.90.84 2.680 47602 * 25 Foot Half Round Pipe ** 20 Foot Half Round Tube 28

Aluminum Marine Shapes 606 - T6 Pen Board Stocked in 24 foot lengths Size (A) Size (B) (C) Lbs/Ft Lbs/Length Part Number 7.875.000.25.75 4.640 559847 606 - T6 Pen Board Stanchion Stocked in 24 foot lengths Size (A) Size (B) (C) Lbs/Ft Lbs/Length Part Number 4.75 2.8.2 4.500 08.000 64778 606 - T6 Pen Board Channel Stocked in 24 foot lengths Size (A) Size (B) (C) Lbs/Ft Lbs/Length Part Number.874.560.2.66 9.264 64760 29

Aluminum I-Beam 606 - T6 Aluminum Association I-Beam Stocked in 25 foot lengths Width (A) Flange (B) Web (C) Thickness (D) Radius (R) Lbs/Ft Lbs/Length Part Number 2.50.260.250 2.00 50.750 488779 4.50.20.250 2. 57.775 622292 4.70.290.250 2.79 69.825 4857 5.90.20.00.700 92.500 504868 6 4.90.280.00 4.00 00.750 4288 6 4.20.50.00 4.692 7.00 50969 7 4.20.80.00 5.800 45.000 592 8 5.20.50.00 6.8 54.525 56988 8 5.250.40.00 7.02 75.580 508456 0 6.250.40.400 8.646 26.50 502688 2 7.290.470.400.672 29.800 64956 2 7.0.620.400 4.292 57.00 545262 606 - T6 American Standard I-Beam Stocked in 25 foot lengths W idth (A) F lange (B) W eb (C) Thickness (D) Radius ( R) Radius ( R2) Lbs Ft Lbs/ Length Part Number 2.0. 70. 70. 270. 00.96 49.075 496900 2.509. 49. 70. 270. 00 2.595 64.875 22 4 2.660. 90. 90. 290. 0 2.660 66.00 485705 4 2.796. 26. 90. 290. 0.28 82.075 574279 4 4.000.. 290.. 45 4.758 8.950 552659* 5.000. 20. 20. 0. 0.40 85.750 55264 5 5.000.. 0.. 65 6.494 62.50 5698* 6.0. 20. 20. 0. 40 4.02 07.550 52845 6 4.000. 20. 279. 250.. 4.6 04.00 507620* * 6 6.000. 240. 269. 250.. 5.40 5.00 54507* * 8 4.000. 270. 260. 70. 60 6.48 58.700 589486 8 8.000. 288. 4. 400.. 0.725 268.25 556807* * 8 4.262. 52. 270. 70. 80 8.8 220.0 545270 0 4.660. 0. 0. 40. 90 8.764 29.00 526 * H-Beam ** Wide Flange 0

Aluminum Flat Rolled Products 5052 - H2 Sheet & Coil Specifications: ASTM B 209 & QQ-A-250/8 Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.025 48 x CTL.56 4660.080 48 x 96.7 5.744 29422 48 x 96.56.200 46789 48 x 20.7 44.680 29448 48 x 20.56 4.240 46797 48 x 44.7 5.66 68 48 x 44.56 7.088 467202 60 x COIL.7 54.02 48 x COIL.447 470 60 x 96.7 44.680 25470 48 x 96.447 4.00 29040 60 x 20.7 55.850 29464 48 x 20.447 7.880 29066 60 x 44.7 67.020 29480 48 x 44.447 2.456 29082 60 x 240.7.700 224426.040 48 x COIL.559 4794.090 6 x COIL.260 50 48 x 96.559 7.890 2565 6 x 96.260 0.240 22448 48 x 20.559 22.60 292 6 x 20.260 7.800 2950 48 x 44.559 26.82 625 6 x 44.260 45.60 29529.050 6 x COIL.698 4825 6 x 240.260 75.600 224400 6 x 96.698 6.752 224442 48 x COIL.260 556 6 x 20.698 20.940 2947 48 x 96.260 40.20 29545 6 x 44.698 25.28 296 48 x 20.260 50.400 2956 48 x COIL.698 4867 48 x 44.260 60.480 706 48 x 96.698 22.6 2989 48 x 240.260 00.800 22495 48 x 20.698 27.920 29202 60 x COIL.260 572 48 x 44.698.504 64 60 x 96.260 50.400 22865 60 x COIL.698 4906 60 x 20.260 6.000 29587 60 x 96.698 27.920 46756 60 x 44.260 75.600 67 60 x 20.698 4.900 29228 60 x 240.260 26.000 29626 60 x 44.698 4.880 29244.00 6 x COIL.400 578647.06 6 x COIL.880 4948 6 x 44.400 50.400 5884 6 x 96.880 2.20 22444 48 x COIL.400 598 6 x 20.880 26.400 29260 48 x 96.400 44.800 42272 6 x 44.880.680 29294 48 x 20.400 56.000 29642 48 x COIL.880 4980 48 x 44.400 67.200 29668 48 x 96.880 28.60 297 48 x 240.400 2.000 29684 48 x 20.880 5.200 29 60 x COIL.400 52 48 x 44.880 42.240 667 60 x 20.400 70.000 2994 60 x COIL.880 5025 60 x 44.400 84.000 29707 60 x 96.880 5.200 2959 60 x 240.400 40.000 22487 60 x 20.880 44.000 2967.25 6 x COIL.750 527 60 x 44.880 52.800 22849 6 x 96.750 42.000 2972.080 6 x COIL.7 5067 6 x 20.750 52.500 29749 6 x 96.7 26.808 269604 6 x 44.750 6.000 29765 6 x 20.7.50 298 6 x 240.750 05.000 2978 6 x 44.7 40.22 29406 6 x 288.750 26.000 495768 48 x COIL.7 509 48 x COIL.750 525

Aluminum Flat Rolled Products 5052 - H2 Sheet & Coil (continued) Specifications: ASTM B 209 & QQ-A-250/8 2 Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.25 48 x 6.750 2.000 49897.90 48 x 20 2.654 06.60 22842 48 x 60.750 5.000 49902 48 x 44 2.654 27.92 798 48 x 72.750 42.000 4990 48 x 240 2.654 22.20 0009 48 x 96.750 56.000 29804 48 x 00 2.654 265.400 55744 48 x 20.750 70.000 29820 60 x COIL 2.654 689 48 x 44.750 84.000 722 60 x 96 2.654 06.60 4078 48 x 92.750 2.000 49766 60 x 20 2.654 2.700 0025 48 x 240.750 40.000 29846 60 x 44 2.654 59.240 004 60 x COIL.750 684 60 x 240 2.654 265.400 0067 60 x 96.750 70.000 269646 60 x 288 2.654 8.480 507468 60 x 20.750 87.500 6 60 x 00 2.654.750 552829 60 x 44.750 05.000 748 72 x CTL 2.654 464 60 x 92.750 40.000 49827 72 x 96 2.654 27.92 47427 60 x 240.750 75.000 29888 72 x 20 2.654 59.240 4745 72 x COIL.750 277966 72 x 44 2.654 9.088 4744 72 x 96.750 84.000 40750 72 x 240 2.654 8.480 4745 72 x 20.750 05.000 28664 72 x 00 2.654 98.00 52227 72 x 44.750 26.000 40768.250 48 x COIL.490 449 72 x 240.750 20.000 28222 48 x 96.490.680 25645.60 48 x COIL 2.20 685 48 x 20.490 9.600 2567 48 x 96 2.20 7.60 4056 48 x 44.490 67.520 228420 48 x 20 2.20 89.200 259764 48 x 240.490 279.200 2246 48 x 44 2.20 07.000 764 48 x 00.490 49.000 55298 48 x 240 2.20 78.400 22479 60 x COIL.490 224670 48 x 00 2.20 22.000 5528 60 x 96.490 9.600 2576 60 x COIL 2.20 6869 60 x 20.490 74.500 22848 60 x 96 2.20 89.200 4929 60 x 44.490 209.400 2584 60 x 20 2.20.500 27709 60 x 240.490 49.000 228446 60 x 44 2.20.800 2994 60 x 00.490 46.00 56420 60 x 240 2.20 22.000 29927 72 x COIL.490 46992 60 x 00 2.20 278.800 55655 72 x 96.490 67.520 4952 72 x COIL 2.20 492825 72 x 20.490 209.400 4960 72 x 44 2.20 60.600 564868 72 x 44.490 25.280 4978 72 x 240 2.20 267.600 4928 72 x 240.490 49.040 472.90 6 x COIL 2.654 6877 72 x 00.490 52.500 582442 6 x 96 2.654 6.696 22899.75 48 x 96 5.240 67.680 49249 6 x 20 2.654 79.620 228404 48 x 44 5.240 25.520 2245 6 x 44 2.654 95.544 29969 96 x 240 5.240 88.400 46575 6 x 240 2.654 59.240 29985.500 48 x 48 6.984.744 556459 48 x COIL 2.654 6885 48 x 96 6.984 22.488 5588 48 x 96 2.654 84.928 250540 48 x 44 6.984 5.22 2655

Aluminum Flat Rolled Products 508 - H6 Sheet, Plate & Coil Specifications: ASTM B 928 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.090 72 x 240.244 49.28 642276.250 72 x CTL.460 497809.25 48 x 44.70 8.040 58074 72 x 44.460 249.20 57277 48 x 240.70 8.400 558 72 x 240.460 45.200 509868 96 x 240.70 276.80 6547 72 x 288.460 498.240 50097 60 x 240.70 7.000 55825 72 x 00.460 59.000 5788.60 60 x 44 2.20.800 547052 84 x 240.460 484.400 509842 60 x 240 2.20 22.000 5009 84 x 288.460 58.280 5729 60 x 288 2.20 267.600 5006 96 x 240.460 55.600 50988 96 x COIL 2.20 545660 96 x 00.460 692.000 625 96 x 240 2.20 56.800 5725. 60 x 240 4.0 4.000 5800 96 x 288 2.20 428.60 5900 60 x 00 4.0 54.250 642268.90 48 x 44 2.60 26.240 50055 72 x 00 4.0 649.500 68455 48 x 240 2.60 20.400 547060 96 x 240 4.0 692.800 50744 48 x 00 2.60 26.000 5747.75 48 x 96 5.80 65.760 666474 60 x 44 2.60 57.800 57227 48 x 44 5.80 248.640 666482 60 x 240 2.60 26.000 50047 60 x 240 5.80 58.000 496667 60 x 276 2.60 02.450 57489 96 x 240 5.80 829.440 50748 60 x 288 2.60 5.600 5007.500 48 x 96 6.90 22.20 65494 72 x 44 2.60 89.60 6609 60 x 20 6.90 45.500 6665 72 x 240 2.60 5.600 509850 60 x 240 6.90 69.000 496675 72 x 288 2.60 78.720 50089 72 x 240 6.90 829.200 6560 72 x 00 2.60 94.500 5770 96 x 240 6.90 05.600 507426 84 x 240 2.60 68.200 50984.625 60 x 240 8.640 864.000 58707 96 x 240 2.60 420.800 509826 72 x 240 8.640 06.800 64779 96 x 288 2.60 504.960 546.750 60 x 240 0.60 06.000 50657 96 x 00 2.60 526.000 68502.000 60 x 240.824 82.400 509062.250 48 x 44.460 66.080 5460 72 x 240.824 658.880 642048 48 x 240.460 276.800 566852 96 x 240.824 22.200 62955 48 x 288.460 2.60 65940 2.000 48 x 20 27.650 06.000 65507 48 x 00.460 46.000 6592 48 x 44 27.650 27.200 549274 60 x 44.460 207.600 5720 2.500 48 x 44 4.560 658.880 69427 60 x 240.460 46.000 5796.000 60 x 44 4.472 2488.20 65782 60 x 00.460 42.500 5246 4.000 48 x 44 55.296 2654.20 727000

Aluminum Flat Rolled Products 5086 - H6 Sheet, Plate & Coil Specifications: ASTM B 928 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.060 60 x 44 0.870 52.20 694.90 60 x COIL 2.60 449 60 x 240 0.870 87.00 6942 60 x 96 2.60 05.20 25247.080 60 x 44.06 66.6 6950 60 x 20 2.60.50 2848 60 x 240.06 0.60 6968 60 x 44 2.60 57.80 469.090 60 x 44.244 74.64 6976 60 x 240 2.60 26.00 4655 60 x 240.244 24.40 6984 60 x 288 2.60 5.60 507450.00 60 x 44.82 82.92 6992 66 x COIL 2.60 48677 60 x 240.82 8.20 6400 66 x 240 2.60 289.0 462082.25 48 x COIL.70 46 72 x COIL 2.60 274609.70 20.76 4940 72 x 96 2.60 26.24 50795.70 4.60 49428 72 x 20 2.60 57.80 472728 48 x 96.70 55.6 25626 72 x 44 2.60 89.56 270558 48 x 20.70 69.20 26979 72 x 240 2.60 5.60 4697 48 x 44.70 8.04 462 72 x 288 2.60 78.72 4504 48 x 240.70 8.40 496 72 x 00 2.60 94.50 568600 48 x 00.70 7.00 582646 84 x COIL 2.60 49667 60 x COIL.70 467 84 x 240 2.60 68.20 476 60 x 96.70 69.20 2807 96 x COIL 2.60 4968 60 x 20.70 86.50 25050 96 x 240 2.60 420.80 4778 60 x 44.70 0.80 445 96 x 00 2.60 526.00 66887 60 x 240.70 7.00 4477.250 48 x COIL.460 452 72 x COIL.70 279722.460 4.52 49452 72 x 240.70 207.60 456.460 69.20 49460 72 x 00.70 259.50 588 48 x 96.460 0.72 25092 96 x COIL.70 6596 48 x 20.460 8.40 250207 96 x 240.70 276.80 672679 48 x 44.460 66.08 487.60 60 x COIL 2.20 228470 48 x 92.460 22.44 552227 60 x 20 2.20.50 25068 48 x 240.460 276.80 484 60 x 44 2.20.80 25076 48 x 288.460 2.6 497427 60 x 240 2.20 22.00 25084 48 x 00.460 46.00 5574 60 x 00 2.20 278.75 562997 60 x COIL.460 4574 72 x COIL 2.20 65642 60 x 96.460 8.40 247822 72 x 240 2.20 267.60 60490 60 x 20.460 7.00 25025 96 x COIL 2.20 509622 60 x 44.460 207.60 2844 96 x 240 2.20 56.80 5794 60 x 92.460 276.80 55804 96 x 00 2.20 496.00 669959 60 x 240.460 46.00 488.90 48 x COIL 2.60 445 60 x 00.460 42.50 55964 2.60.56 4946 72 x COIL.460 27796 2.60 52.60 49444 72 x 96.460 66.08 4074 48 x 96 2.60 84.6 228462 72 x 20.460 207.60 40742 48 x 20 2.60 05.20 2564 72 x 44.460 249.2 28257 48 x 44 2.60 26.24 4558 72 x 240.460 45.20 4922 48 x 240 2.60 20.40 4590 72 x 00.460 59.00 568595 48 x 00 2.60 26.00 55742 84 x COIL.460 49675 4

Aluminum Flat Rolled Products 5086 - H6 Sheet, Plate & Coil (continued) Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.250 84 x 240.46 484.40 4964.75 96 x 240 5.8 828.80 26070 96 x COIL.46 487587 96 x 00 5.8 06.00 6542 96 x 240.46 55.60 5009.500 48 x 60 6.9 8.20 509494 96 x 00.46 692.00 60588 48 x 96 6.9 22.2 509509. 60 x COIL 4. 56857 48 x 44 6.9.68 564 60 x 96 4. 7.20 568804 48 x 240 6.9 552.80 580 60 x 44 4. 259.80 49480 60 x 240 6.9 69.00 520 60 x 240 4. 4.00 508 96 x 240 6.9 05.60 488745 96 x 240 4. 692.80 282602.625 60 x 240 8.64 864.00 528 96 x 00 4. 866.00 65420.750 48 x 44 0.6 497.28 5229.75 48 x 60 5.8 0.60 509486 60 x 240 0.6 06.00 5245 48 x 96 5.8 65.76 509478.875 60 x 240 2.0 20.00 5829 48 x 44 5.8 248.64 506.00 60 x 44.82 829.44 68489 48 x 240 5.8 44.40 40094 60 x 240.82 82.24 4097 60 x 96 5.8 207.20 56574.50 60 x 44 20.74 244.40 58056 60 x 240 5.8 58.00 522 2.00 60 x 44 27.65 659.00 57472 58 - H6 Sheet, Plate & Coil Specifications: ASTM B 928 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.25 96 x COIL.70 65049.250 60 x COIL.460 60897.60 96 x COIL 2.20 6089 60 x 44.460 207.60 64566 96 x 240 2.20 56.80 60766 60 x 00.460 42.50 64574 96 x 00 2.20 446.00 6624 72 x COIL.460 6090 96 x 60 2.20 55.20 66259 72 x 00.460 59.00 65897.90 48 x COIL 2.60 6086 96 x COIL.460 60855 60 x COIL 2.60 60889 96 x 240.460 55.60 60782 72 x COIL 2.60 60902 96 x 60.460 80.40 6509 72 x 44 2.60 89.6 65805. 96 x 240 4.0 692.80 60790 72 x 00 2.60 94.50 658 96 x 60 4. 09.20 65554 96 x COIL 2.60 60847.75 96 x 240 5.8 828.80 60805 96 x 240 2.60 420.80 60774 96 x 00 5.8 06.00 652.250 48 x COIL.460 6087 96 x 60 5.8 24.20 65588 48 x 96.460 0.72 664.500 96 x 240 6.9 05.60 608 48 x 00.460 46.00 6659.00 48 x 288.824 29.4 6582 5

Aluminum Flat Rolled Products 5456 - H6 Sheet & Plate Specifications: ASTM B 928 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.00 60 x 20.82 69.0 66097.75 96 x 240 5.80 828.800 6696.25 60 x 240.728 72.80 609.500 94 x 240 6.90 082.57 648 72 x 240.728 207.6 669202.625 96 x 240 8.640 82.400 64076 96 x 240.728 276.48 6428.750 72 x 240 0.60 24.20 6446.60 82 x 240 2.22 02. 64299 96 x 240 0.60 657.60 69566.90 60 x 240 2.626 262.20 67752.00 48 X 96.824 442.68 66679 88 x 240 2.626 85.5 602 48 x 44.824 66.52 69574 96 x 240 2.626 420.60 66955 72 x 240.824 658.88 6454.250 94 x 240.460 542.06 6404 96 x 240.824 22.84 66989 96 x 240.460 55.60 6209 48 x 96 20.740 66.552 666806. 94 x 240 4.0 678.6 642.50 48 x 44 20.740 995.52 69582.75 48 x 96 5.80 65.760 6667 2.00 48 x 96 27.648 884.76 66684 94 x 240 5.80 8.50 6420 2.50 48 x 96 4.560 7.920 666822 00-H4 Sheet & Plate Specifications: ASTM B 209 Thickness * 0 Temper ** H2 Temper Size Lbs/Sq Ft Lbs/Sheet Part Number. 06 48 x 44 0.889 42.672 5475*. 25 48 x 44.760 84.480 5204. 250 48 x 44.50 69.440 502. 75 48 x 44 5.290 25.920 5297.00 48 x 44 4.0 677.280 544* * 05 - H24 Polar White Side Specifications: ASTM A 209 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.02 48 x 20.452 8.08 64.06 48 x 20.880 5.20 67060.06 48 x 44.880 42.24 622 6

Aluminum Flat Rolled Products 606 - T6/T65 Sheet & Plate Specifications: ASTM B 209 & QQ-A-250/ Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number 0.06 48 x COIL 0.889 52609.000 96 x 240 4.80 20.000 5906 0.06 48 x 44 0.889 42.672 992.250 48 x 44 7.90 87.65 22496 0.080 48 x 44.28 54.44 40.250 60 x 44 7.90 090.000 6762 0.080 60 x 44.28 67.680 42998.250 96 x 240 7.90 2865.600 699590 0.090 48 x 44.270 60.960 4045.500 48 x 44 2.440 04.45 425 0.00 48 x COIL.4 49528.500 60 x 44 2.440 0.624 280804 0.00 48 x 44.4 67.728 465705.500 72 x 44 2.440 559.80 67254 0.25 48 x COIL.728 4950.500 96 x 240 2.440 40.400 59079 0.25 48 x 44.764 84.672 405.750 48 x 44 25.070 220.7 402862 0.25 60 x 44.764 05.84 406 2.000 48 x 44 28.220 7.422 2855 0.60 48 x 44 2.258 08.84 628052 2.000 60 x 44 28.220 7.28 277869 0.60 60 x 44 2.258 5.480 62742 2.000 72 x 44 28.220 205.06 672522 0.90 48 x 44 2.68 28.688 4087 2.000 96 x 240 28.220 452.200 59087 0.90 60 x 44 2.68 60.860 5065 2.250 48 x 44 2.0 56.76 50226 0.250 48 x 44.60 76.666 400 2.500 48 x 44 5.800 742.29 2467 0.250 60 x 44.60 220.78 568668 2.750 48 x 44 9.260 90.72 592895 0.250 72 x 44.60 264.090 672467.000 48 x 44 42.850 2085.44 246729 0.250 96 x 240.60 580.000 59029.000 72 x 44 42.850 7.42 67250 0. 48 x 44 4.520 29.98 426.000 96 x 240 42.850 6856.000 699605 0.75 48 x 44 5.40 26.296 44.500 48 x 44 50.090 247.800 27289 0.75 60 x 44 5.40 28.44 4224 4.000 48 x 44 57.65 279.86 2850 0.75 72 x 44 5.40 9.88 672475 4.000 96 x 240 57.65 978.400 68755 0.75 96 x 240 5.40 865.600 5907 4.500 48 x 44 64.42 5.802 48496 0.500 48 x 44 7.220 5.86 442 5.000 48 x 44 7.477 478.67 2742 0.500 60 x 44 7.220 48.26 599570 5.000 60 x 44 7.477 49.74 54762 0.500 72 x 44 7.220 525.269 67248 5.500 48 x 44 78.5 822.075 64508 0.500 96 x 240 7.220 5.200 59045 6.000 48 x 44 85.589 465.479 299764 0.625 48 x 44 8.980 47.042 450 7.000 48 x 44 00.800 4905.775 507557 0.625 60 x 44 8.980 546.990 629692 8.000 48 x 44 5.200 5606.599 507565 0.625 96 x 240 8.980 46.800 70067 9.000 48 x 44 27.000 5869.40 629854 0.750 48 x 44 0.80 526.05 468 0.750 60 x 44 0.80 656.276 62825 0.750 72 x 44 0.80 786.449 67249 0.750 96 x 240 0.80 729.600 5905.000 48 x 44 4.80 699.852 4207.000 60 x 44 4.80 87.0 526.000 72 x 44 4.80 046.74 672506 7

Aluminum Flat Rolled Products 606 - T6/T65 MIL-DLT 2262 Ballistic Armor Plate Specifications: ASTM B 209 & MIL-DLT-2262 Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.000 48 x 44 4.80 699.852 6720.500 48 x 44 2.440 04.45 67228 2.000 48 x 44 28.220 7.422 6726 5005 - H4 Flattened Expanded Sheet Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number -.05 48 x 96.260 8.20 62076 -.05 48 x 96.260 8.20 6285* -.08 48 x 96.420.440 40629 -.05 48 x 96.60 5.20 4067 -.08 48 x 96.00 9.600 40645 -.25 48 x 96.620 9.840 4066 -.25 48 x 96.620 9.840 5048* -.25 48 x 20.620 24.800 5667 -.25 48 x 96.400 2.800 52984 *Standard raised 8

Aluminum Flat Rolled Products Tread Plate & Coil 00 - H22 Bright Diamond Tread Plate Thickness Size Lbs/Sq Ft Lbs/Plate Part Number.06 48 x COIL 0.950 50225 48 x 44 0.950 45.600 5029.080 60 x COIL.280 6966 60 x 44.280 76.800 6426.00 48 x COIL.570 467676 48 x 96.570 50.240 4855 48 x 20.570 62.800 486 48 x 44.570 74.60 4889 48 x 92.570 00.480 47594 60 x COIL.570 578524 60 x 92.570 25.600 58275.25 48 x COIL.900 47087 48 x 96.900 60.800 482 48 x 20.900 76.000 489 48 x 44.900 9.200 4847 48 x 92.900 2.600 47609 60 x COIL.900 50649 60 x 92.900 52.000 505.90 48 x COIL 2.820 467668 48 x 96 2.820 90.240 47707 48 x 20 2.820 2.800 477045 48 x 44 2.820 5.60 47705 48 x 92 2.820 80.480 4767 60 x COIL 2.820 57852 60 x 92 2.820 225.600 5828 5086 - H2 Diamond Tread Plate Thickness Size Lbs/Sq Ft Lbs/Plate Part Number.250 48 x 92.650 2.600 487 60 x 92.650 292.000 48725 5086 - H2 Diamond Tread Plate Thickness Size Lbs/Sq Ft Lbs/Plate Part Number.25 60 x 92.900 52.000 55906 5052 - H2 Embosssed (FTQ) Bright Tread Plate Thickness Size Lbs/Sq Ft Lbs/Sheet Part Number.25 60 x 92.900 52.000 6400 5052 - H2 Bright Diamond Tread Plate Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.25 48 x COIL.900 224646 48 x 96.900 60.800 402799 48 x 20.900 76.000 228496 48 x 44.900 9.200 25229 48 x 92.900 2.600 22850 60 x COIL.900 2897 60 x 96.900 76.000 567094 60 x 20.900 95.000 2859 60 x 44.900 4.000 28527 60 x 92.900 52.000 2855 72 x COIL.900 6506 72 x 44.900 6.800 6792 72 x 240.900 228.000 67920.90 48 x COIL 2.800 25205 48 x 96 2.800 89.600 4758 48 x 20 2.800 2.000 2522 48 x 44 2.800 4.400 26402 48 x 92 2.800 79.200 252 60 x COIL 2.800 47469 60 x 96 2.800 2.000 4906 60 x 20 2.800 40.000 494 60 x 44 2.800 68.000 4922 60 x 92 2.800 224.000 490 606 - T6 Diamond Tread Plate Specifications: ASTM B 62 Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.25 48 x 44.900 9.200 4207 48 x 92.900 2.600 4249 60 x 92.900 52.000 4265.90 48 x 92 2.800 79.200 6298.250 48 x 96.700 8.400 484 48 x 44.700 77.600 272487 48 x 92.700 26.800 42 60 x 96.700 48.000 49044 60 x 92.700 296.000 48.75 48 x 96 5.500 7.760 69477 48 x 92 5.500 52.000 526 60 x 92 5.500 440.000 49542.500 48 x 92 7.200 460.800 4672 60 x 92 7.200 576.000 50655 9

Aluminum Cast Products Cast Tooling Plate Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.250 48 X 44.64 77.5 59420.75 48 X 44 5.45 265.24 624464.500 48 X 44 7.27 5.82 5942.625 48 X 44 9.09 442.9 594229.750 48 X 44 0.9 50.97 59427.00 48 X 44 4.54 707.64 594245.00 60 X 44 4.54 882.72 6756.00 72 X 44 4.54 057.8 6782.25 48 X 44 8.00 876.00 59942.50 48 X 44 2.82 06.94 59425.50 60 X 44 2.82 24.69 605070 2.00 72 X 44 27.64 20.44 668 2.50 48 X 44 5.80 742. 64489.00 48 X 44 42.85 2085.44 677459 MIC 6 Cast Tooling Plate Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number.250 48 X 44.64 77.5 694485.75 48 X 44 5.45 265.24 69449.500 48 X 44 7.27 5.82 694508.625 48 X 44 9.09 442.9 69456.750 48 X 44 0.9 50.97 694524.00 48 X 44 4.54 707.64 69452.25 48 X 44 8.00 876.00 694540.50 48 X 44 2.82 06.94 694558 2.50 48 X 44 5.80 742. 694566.00 48 X 44 42.85 2085.44 694574 40

Aluminum Cast Products Duramold 5 Cast Tooling Plate Thickness Sizes Lbs/Sq Ft Lbs/Sheet Part Number 4.0 48 X 72 56.44 78.4 72547 5.0 48 X 72 70.56 722.96 72555 6.0 48 X 72 84.67 2067.5 7256 4

Aluminum Tubing 606 Structural Tubing Specifications: ASTM B 22 Stocked in 20 foot lengths OD Wall Lbs/Ft Lbs/Length Part Number.065.07 2.40 69689 5.059.26 2.520 66.058.5.020 648.065.68.60 6408.062.29 4.80 57900.08.287 5.740 6055.25.42 8.240 65656**.065.290 5.800 66295.065.52 7.040 5872.25.648 2.960 587 2.065.465 9.00 57926 2.25.88 7.660 659095 2.250.67 2.40 644 2.070.64 7.745 64704 2.250 2.2 42.400 68007.25.55 27.00 57942 4.25.825 6.500 57950 4.250.46 69.260 64089 5.25 2.25 45.020 6705 5.250 4.477 89.540 62950 6.25 2.7 54.260 6704 6.250 5.49 08.80 6740 8.750 20.088 220.968 6260* 0.250 9.006 80.20 6967 0.000.250 65.750 562476* * Ft Length. Temporary item. ** 2 Ft Length. 606 Drawn Seamless Tubing Specifications: WW-T-700/6 Stocked in 2 foot lengths OD Wall Lbs/Ft Lbs/Length Part Number.05.02.84 66995.05.064.768 669927.05.6.92 66995.065.290.600 66994.05.9 2.6 66999 * Ft Length. Temporary item. 42

Aluminum Tubing 5086-H2 Drawn Seamless Tubing Specifications: WW-T-700/5 Stocked in 20 foot lengths OD Wall Lbs/Ft Lbs/Length Part Number 2.250.67 2.4 65492 2.250 2.20 42.40 654207.250 2.540 50.80 65425 4.250.46 69.26 65422 5.250 4.477 89.54 6542 6.250 5.49 08.8 654249 8.500.59 27.82 640070 5086-H Square Tubing Specifications: ASTM B 22 Stocked in 20 foot lengths OD Wall Lbs/Ft Lbs/Length Part Number 2*.250 2.0 50.40 6746 *.250.0 79.20 6847 *Radius Corner 4

Aluminum Tubing 606 - T6 Square Tubing Specifications: ASTM B 22 Stocked in 20 foot lengths Size Wall Lbs/Ft Lbs/Length Part Number Size Wall Lbs/Ft Lbs/Length Part Number.25.526 0.520 627420 *.250.08 62.60 6264.25.674.480 62759 4*.25 2.09 46.80 487082.25.825 6.500 627527 4*.88.49 68.780 486298 *.40.844 7.700 52895*** 4*.250 4.46 88.720 487074.250.500 0.000 6076 4.250 4.500 90.000 42256 2.08.76 5.260 6409 4.75 6.524 0.480 42248 2*.25.26 2.646 486280** 4.500 8.400 68.000 5208 2.25.26 22.520 6988 5*.250 5.65 2.700 559009 2.56.54 27.080 49275 5.250 5.700 4.000 64786 2.90.66 2.720 485056 6.250 6.85 6.700 6664 2.250 2.00 42.000 42906 6*.250 6.85 6.700 5574 2*.250 2.00 42.000 297275 6.75 0.24 206.690 69029 2.095.097 2.940 64047 6.500.200 264.000 62955 2.25.425 28.500 64287 8.875 6.88 6.760 677467 2.250 2.700 54.000 5602 8.250 9.0 82.280 6592 *.25.709 4.80 487090 8.75.728 274.560 62405 *.88 2.502 50.040 4245 8.500 7.640 52.800 6296.29 2.92 58.400 502646 * Radius Corner ** 2 FT Length *** 2 Lengths 606 - T52 Square Tubing Specifications: ASTM B 22 Stocked in 2 foot lengths Size Wall Lbs/Ft Lbs/Length Part Number *.0 0.22 8.050 485488**.25 0.75 7.90 2608 *.062 0.279 6.975 490475 *.0 0.454.50 4860**.25 0.526.00 6770 *.25 0.526.00 2554.25 0.674 4.200 0596 *.25 0.809 7.056 642200.25 0.825 7.94 6788.25 0.974 20.55 4526 2.25.26 2.79 6796.25.70 6.470 22894.250.0 69.596 45962 4.25 2.4 49.209 4267 4.250 4.500 94.860 46007 * Radius Corner ** 25 FT Lengths 44

Aluminum Tubing 606 - T6 Rectangular Tubing Specifications: ASTM B 22 Stocked in 20 foot lengths, sharp corners Size Wall Lbs/Ft Lbs/Length Part Number Size Wall Lbs/Ft Lbs/Length Part Number x.25.69 6.572 6680 x 4*.90 2.92 6.4 62785** x 2.25.824 6.480 62748 x 4.250.900 78.000 420420 x 2*.88.45 22.900 6605 x 5.88.72 67.440 596807 x 6.25 2.024 40.480 670499 x 6.88.9 78.626 6760 x 2.25.0 2.255 666424 x 6*.250 5.06 00.720 6242 x.25.275.875 64469 x 6.250 4.998 99.960 6724 2 x *.25.409 28.80 48705 4 x 6.250 5.66 2.700 6422 2 x.25.409 28.80 6996 4 x 6*.250 5.66 2.720 506242 2 x.250 2.700 54.000 504 4 x 8.250 6.762 5.240 6584 2 x 4.25.726 4.520 6940 4 x 8.75 0.26 2.489 545026 2 x 4**.250.278 69. 65966 5 x 8.75 0.805 26.00 6297 2 x 4*.88 2.495 49.900 6974 6 x 8.75.925 28.500 62997 2 x 4.75 4.726 94.520 62599 2 x 5.25 2.025 40.500 66995 2 x 6.25 2.26 46.250 640680 2 x 6.250 4.500 90.000 660787 2 x 8.25 2.924 58.480 6468 2 x 8**.250 5.678 9.70 662 2 x *.28 2.806 56.20 59450 2 x *.250.48 66.960 650 * Radius Corner ** 2 FT Lengths 606 - T52 Rectangular Tubing Specifications: ASTM B 22 Stocked in 2 lengths, sharp corners Size Wall Lbs/Ft Lbs/Length Part Number x *.25.600 2.650 626775 x.25.676 4.25 59972 x 2*.062.428 0.700 496 x 2.25.824 7.7 680 x 2*.25.824 20.600 485690 x.25.26 2.79 460 x 4.25.424 0.02 5758 x 2.25.97 20.472 689 x 2.25.0 2.255 420975 x.88.86 7.220 59484 x.25.50 28.462 62799 2 x.25.42 29.769 5960 2 x 4.25.726 6.89 46065 2 x 5.25 2.025 42.69 475459 2 x 6.25 2.26 49.040 49942 * Radius Corner 45

NOTES

Alaskan Quality is achieved through a rigorous program designed to get the right instructions to the right people, so that a product is fabricated correctly the first time. Since our beginning in 9, the Alaskan Quality Program has been continually analyzed, revised and improved to meet the increasing challenges and complexity of specifications for piping, fittings, and custom fabrication. Our current Quality Program allows us to create an assignment of responsibility for engineering, drafting, layout, purchasing, scheduling, fabrication, examination, documentation and packaging. Thus our goal...conformance to specification...is consistently shared with you, the Purchaser. Alaskan s facilities for radiography, liquid penetrant examination, ultrasonic gaging, hydrotesting and dimensional checking further confirm the quality that the program creates. Our program of proven procedures also enables the certification of parts and pressure vessels with the symbols of UM, U and U2 in accordance with Section VIII of the ASME Boiler and Pressure Vessel Code. Your purchase of Alaskan quality-crafted products will enable us to share with you our experience, knowledge and dependability. Hydrotesting verifies pressure capabilities of pipe and tubing. Heat-treatment stress relieves fittings after forming. Specialized film reader and digital densitometer are used in interpreting radiographic film. Geometric accuracy is checked on all Alaskan fittings. Radiographic inspection checks the integrity of welds.