FOR SALE (2) Eastman Cutting Systems 2 Eastman Eagle C125 Conveyor Cutting Systems, with Power Feed Systems Unit #1 Purchased in 2006 (Blue) Unit #2 Purchased in 2008 (Black) Cutting Table Size: 78 Width (76.6 Addressable) x 16 Length (13 Addressable) These have been great machines for us. Lots of extra parts, custom work center, tool box, work table, etc. Both machines are still in production and being used daily. New equipment has been ordered and these units will NOT be available until approximately May 2015. - Both machines are fully operational. Ready for operational inspection. - Newer conveyors / cutting surfaces - Both machines are currently setup round knives, punches and pen holders. Also included are the drag knives and an airbrush system (On Unit #1, not used since 2009). Other head options are available from Eastman. - Mirrored operator system which allows the operator / controls to be located in the center. Optimized for the smallest footprint. - Variable Frequency Drives installed on both vacuums to allow for a broader range of materials to be cut (tent fabric, banner, mesh, polyester, etc.) - Equipment has always been under Eastman Machine Co. s service plan - 230 volt, 3 Phase, 50/60 hz - Jib Cranes NOT INCLUDED in sale - Seller will provide training on equipment prior to decommission - Seller will assist buyer with decommission and simple loading The Eagle conveyor system boasts supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled material goods with consistent speed and control. Eastman's gantry and
tool head design are engineered to cut the most diverse technical and industrial fabrics available, while exceeding industry standards for accuracy. The robust conveyor design delivers unrivaled levels of material utilization and is often capable of cutting multiple layers without plastic overlay. This computer-controlled cutting system requires minimal operator guidance to automatically feed and spread material to the identified start position. Purchase Price: $151,530 each x 2 = $303,060 Asking Price: 1 machine - $90,000 2 machines and all accessories - $170,000 NOTE: Machines will NOT be available until approximately May 2015, details to be discussed.
Eastman Machine Company Specifications: http://www.eastmancuts.com/products/automated-cutting-systems/automated-cutting-systems/conveyorcutting-system.html CUTTING GANTRY and Y-CAR (TOOL HEAD HOLDER) 1. Brushless DC Servo motor control - Synchronized dual X-axis servos 2. Working range (Addressable) - X-axis (13 ) - Y-axis (76.6 ) - Maximum plotting and cutting speed (152.4cm/s) - Maximum acceleration (1.3 G) 3. 7 Widescreen LCD, Full Color Control Panel, Restrictive Touchscreen, Interface Terminal (HMI) Nema 4X Protection 4. Gantry E-Chain Cables 5. Precision machined aluminum alloy construction; clear anodized for superior finish protection. 6. Safety features - Two stop discs - Four remote emergency stops TOOL HEAD 1. Three Tool Cutting Head with pen lift assembly - (1) 1 Round Blade Mount (10 spare blades) - (2) 2 Round Blade Mount (20 spare blades)
2. Laser diode alignment tool 3. Tool Changing Station 4. Tool depth limiters 5. Theta axis servo-drive brushless motor 6. Electronic pressure control of all tools CONVEYOR 1. Heavy duty welded construction 2. Precision ground linear rail 3. 12 DP rack and pinion drive system 4. One Internal 10 Hp high flow blower and silencer with VFD control 5. Micro-Perforated Urethane Cast Cutting Belt (85dm) 6. 28 cm/sec Conveyor Drive Assembly 7. Belt Tool Kit for future belt installations 8. Anti-Static Tinsel Cord InMotion Continuous Cut while Convey Option ($5,000.00 Value) - An advanced and intelligent cutting while conveying software that aims to boost throughput by 10-30% depending on the pattern file parameters. Payback measurement could be realized within days! OPERATING SYSTEM AND COMPUTER SOFTWARE 1. Motion Control Multi-Axis Control Computer - Microsoft Windows Operating System - 50cm (20 ) Flat Screen LCD Monitor - Completely sealed to protect against high particulates - Constructed of heavy 11 gauge steel/scratch resistant inside & out - Fan cooled enclosure for optimal computer performance - Keyboard with USB Ports & Mouse 2. cutpro Windows Cutter Control and Management Software http://www.eastmancuts.com/products/design-cut-software/cutpro.html MATERIAL HANDLING EQUIPMENT / PAY-OFF / UNWIND MACHINE #1 78 Three Roll Power Feed System - 1500 lbs. max weight - Auto Edge Control - 30 Roll Diameter - Standard Unwind - One set of core stops http://www.eastmancuts.com/products/material-feeding-spreading-equipment/feeding-systems/three-rollpower-feed-system.html MACHINE #2 78 Single Roll Power Feed System - 1500 lbs. max weight - Auto Edge Control - 30 Roll Diameter - Mirror Image - One set of core stops
http://www.eastmancuts.com/products/material-feeding-spreading-equipment/feeding-systems/power-feedsystem.html