Schluter -RONDEC Finishing and edge-protection profile with a rounded reveal surface. Schluter -RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. Prevents tile edges from chipping Ideal for color coordination for tile and grout Creates beautiful accents and decorative designs Combine with the DESIGNLINE border profile for increased design options Features an integrated joint spacer that creates a defined joint cavity between the tile and profile (specific materials only) Connectors allow for the proper alignment of adjoining profiles Full line of accessories available, including inside and outside corners, sink corners, connectors, and end caps Available in chrome-plated solid brass, anodized aluminum, color-coated aluminum, stainless steel, and PVC
Schluter -QUADEC Finishing and edge-protection profile with a rounded reveal surface. Schluter -QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface. Prevents tile edges from chipping Can be incorporated as an accent within tile fields on floors and walls Create modern decorative designs, interesting contrasts, and match with tile and grout Combine with QUADEC-FS and/or DESIGNLINE for increased design options QUADEC in stainless steel can be used as a stair nosing or floor transition profile The universal accessory piece can be used to produce a 90 inside corner, 90 outside corner, and end cap Available in stainless steel, anodized aluminum, and color-coated aluminum
Schluter -DITRA Uncoupling and waterproofing membrane (1/8 [3 mm]-thick) Schluter -DITRA is specifically designed for ceramic and stone tile installations. DITRA provides uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA serves as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/osb. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA performs all these functions while still providing adequate support/load distribution for the tile covering. Provides uncoupling, waterproofing, vapor management, and heavy load distribution to ensure the durability and integrity of tile installations Nominal 1/8 (3 mm)-thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings Can be installed on top of concrete, plywood, OSB, gypsum, existing vinyl floors, structural planks, subfloors, and radiant heated floors Matting creates a forgiving point between the tile and the substrate, allowing for independent movement between the two and eliminates the major cause of cracking and delaminating of tiled surfaces Features a grid structure of square cutback cavities and an anchoring fleece laminated to the underside which is bonded to the surface of the substrate and prevents thin-set from filling the cavities Quick and easy to install; few tools required and ready to receive tile immediately
Schluter -KERDI Bonded waterproofing and vapor-retardant membrane Schluter -KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas. Sheet-applied polyethylene waterproofing membrane and vapor retarder Eliminates water damage which can lead to mold and mildew Features an anchoring fleece on both sides to anchor the membrane in thin-set mortar Ideal for waterproofing in conjunction with tiled surfaces on walls and floors Emits zero VOCs and can contribute towards achieving green building credits Water vapor permeance of 0.90 perms, when tested according to ASTM E96, using Procedure E at 90% relative humidity 8-mil-thick and guarantees uniform thickness Listed by cupc and evaluated by ICC-ES 8-mil-thick and guarantees uniform thickness Listed by cupc and evaluated by ICC-ES
Schluter -KERDI-DRAIN Floor drain with integrated bonding flange Schluter -KERDI-DRAIN is a floor drain with an integrated bonding flange that provides a large contact area for a secure connection to the KERDI waterproofing membrane at the top of the assembly. Integrated sloped bonding flange available in ABS, PVC, or stainless steel allows for a secure, topical waterproofing connection ABS and PVC flange have a 2 or 3 outlet Stainless steel flange has a 2 or 3 no-hub outlet or a 2 threaded outlet Drain grate can be laterally adjusted to fit the layout of the tile grid and leveled to the tiled surface Accommodates wide range of tile thicknesses: 1/4 (6mm) to 1-1/4 (32 mm) Also accommodates the frameless tileable grate to create a nearly invisible drainage line Adjustable grate in stainless steel or various finishes of anodized aluminum Tamper proof screws and wrench also available
Schluter -KERDI-LINE Low-profile linear floor drain The Schluter -KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. Create barrier-free, open-concept spaces Floors can be sloped on a single plane to KERDI-LINE, enabling the use of large-format tiles Channel body is made of formed stainless steel and features a KERDI collar to create a secure waterproof connection Two frame height options available to accommodate different tile covering thicknesses Off-set and center outlets available Locking mechanism available for high-security applications (perforated grate only) Accommodates all thicknesses of ceramic tiles and stone coverings Available in lengths ranging from 20 (50 cm) to 72 (180 cm) Grate assemblies sold separately and available in three designs: closed, perforated, and a frameless tileable grate
Schluter -KERDI-SHOWER-KIT Complete shower kit The Schluter -KERDI-SHOWER-KIT is an all-inclusive package containing each of the components required to create a watertight shower assembly. Designed to create a fully waterproof and vapor-tight enclosure in tiled showers and residential steam showers Contains shower tray, shower curb, waterproofing membrane, and waterproofing strips, formed corners, pipe seal, and mixing valve seal Also includes KERDI-DRAIN with integrated bonding flange and grate available in various finishes Shower kit can also be purchased without a drain Multiple kit sizes available
Schluter -DITRA-HEAT Uncoupling membrane specifically designed for DITRA-HEAT-E-HK electric floor heating cables Schluter -DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management, and support to ensure a long lasting installation. The stud structure of DITRA-HEAT is specifically designed to allow DITRA-HEAT-E-HK heating cables to be snapped into place Self-leveling compounds are not required to encapsulate the cables into the membrane Nominal 1/4 (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings Available by the roll or by the sheet to accommodate various room sizes Quick and easy to install and few tools are required