HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL

HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual for future reference. Part Number: BNS-11105 R0 Revised: 30/10/09

This product has been designed and constructed according to general engineering standards a. Other local regulations may apply and must be followed by the operator. We strongly recommend that all personnel associated with this equipment be trained in the correct operational and safety procedures required for this product. Periodic reviews of this manual with all employees should be standard practice. For your convenience, we include this sign-off sheet so you can record your periodic reviews. Date Employee Signature Employer Signature a. Standards include organizations such as the American Society of Agricultural and Biological Engineers, American National Standards Institute, Canadian Standards Association, International Organization for Standardization, and/or others.

APPLEGATE HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS TABLE OF CONTENTS 1. Introduction... 5 2. Safety First... 7 2.1. General Safety... 8 2.2. Assembly Safety... 9 3. Assembly... 11 3.1. Pre-Assembly... 11 3.1.1. Placement... 11 3.1.2. Before you Begin... 12 3.1.3. Tools Required... 12 3.2. Horse Shelter Layout & Specifications... 13 3.3. Horse Shelter Assembly... 16 4. Appendix... 25 4.1. Parts List... 25 BNS-11105 R0[ISO NUMBER] 3

APPLEGATE HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS 4 BNS-11105 R0[ISO NUMBER]

APPLEGATE - HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS 1. Introduction 1. INTRODUCTION Applegate portable horse shelters combine versatility, longevity, safety, and low maintenance costs. With a little effort you can provide your horses with sturdy and handsome pasture protection from the weather. The portable horse shelter is 3-sided to provide protection from the prevailing winds. These horse shelter kits will outlast wooden shelters by many years; horses just love to chew on wood. Portable barns and temporary animal protection will save you time and money. Your animals will be healthier in the shade and well-ventilated enclosures instead of out in the open sun all day. Most people put the shelters up onto either wood skids or onto drill stem-pipe skids and drag them from the ends. Skids are not supplied BNS-11105 R0 5

1. INTRODUCTION APPLEGATE - HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS 6 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS 2. Safety First 2. SAFETY FIRST The Safety Alert symbol to the left identifies important safety messages on the product and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety messages. Why is SAFETY important to you? Three big reasons: Accidents disable and kill. Accidents cost. Accidents can be avoided. SIGNAL WORDS Note the use of the signal words DANGER, WARNING, CAUTION, and NOTICE with the safety messages. The appropriate signal word for each message has been selected using the definitions below as a guideline. The Safety Alert symbol means ATTENTION, BE ALERT!, YOUR SAFETY IS INVOLVED. DANGER Indicates an imminently hazardous situation that, if not avoided, will result in serious injury or death. WARNING Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury. NOTICE Indicates a potentially hazardous situation that, if not avoided, may result in property damage. BNS-11105 R0 7

2. SAFETY FIRST APPLEGATE - HORSE SHELTERS 2.1. GENERAL SAFETY 6, 12, 15, 18, & 24 SHELTERS 2.1. GENERAL SAFETY Important: The general safety section includes instructions that apply to all safety practices. Any instructions specific to a certain safety practice (e.g., assembly safety), can be found in the appropriate section. Always read the complete instructional sections and not just these safety summaries before doing anything with the equipment. YOU are responsible for the SAFE use and maintenance of your equipment. YOU must ensure that you and anyone else who is going to work around the equipment be familiar with all procedures and related SAFETY information contained in this manual. Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. The most important safety device on this equipment is a SAFE user or operator. It is the user/operator's responsibility to read and understand ALL safety instructions, safety decals, and manuals and follow them before assembly, operating, or maintaining the equipment. All accidents can be avoided. A person who has not read and understood all safety instructions is not qualified to operate or use the equipment. Untrained users/operators expose themselves and bystanders to possible serious injury or death. Equipment owners must give instructions to employees before allowing them to operate or use the product. Review safety information initially and annually with all personnel who will be using the product. Use this equipment for its intended purposes only. Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety, and could affect the life of the equipment. Any modification to the equipment voids the warranty. Do not allow children, spectators, or bystanders within the work area. Have a first-aid kit available for use should the need arise, and know how to use it. Provide a fire extinguisher for use in case of an accident. Store in a highly visible place. Wear appropriate protective gear. This list includes, but is not limited to: a hard hat gloves protective shoes with slip-resistant soles protective goggles hearing protection 8 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 2. SAFETY FIRST 6, 12, 15, 18, & 24 SHELTERS 2.2. ASSEMBLY SAFETY Before servicing, adjusting, or repairing powered equipment, unplug, place all controls in neutral or off position, stop the engine or motor, remove ignition key or lock out power source, and wait for all moving parts to stop. Follow good shop practices: keep service area clean and dry be sure electrical outlets and tools are properly grounded use adequate light for the job at hand Think SAFETY! Work SAFELY! 2.2. ASSEMBLY SAFETY Have 2 people handle the heavy, bulky components. Stay away from overhead power lines and other obstructions during assembly. Contact with power lines can cause electrocution. Tighten all fasteners to their specified torque before using the equipment. Do not work in high winds. BNS-11105 R0 9

2. SAFETY FIRST APPLEGATE - HORSE SHELTERS 2.2. ASSEMBLY SAFETY 6, 12, 15, 18, & 24 SHELTERS 10 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.1. PRE-ASSEMBLY 3. Assembly WARNING Before continuing, please reread the safety information relevant to this section at the beginning of this manual. Failure to follow the safety instructions can result in serious injury, death, or property damage. 3.1. PRE-ASSEMBLY 3.1.1. PLACEMENT Build shelter on well-drained land, or build the floor up to make sure it stays dry. The open side should face away from the prevailing wind. Horses do need shelter and what can be considered "adequate" will vary according to the season: In summer, a horse needs protection against sun, rain, wind, and hail. In winter, cold, snow, and wind are the elements to consider. Healthy horses with a full winter coat can stand a lot of cold as long as they are dry and out of the wind. In the summer, horses are vulnerable to flies. The size of the shelter, its location, and what it's made of are all important elements to consider. Consider herd instincts and group pecking orders when deciding on windbreak or shed design. Areas housing 1 or 2 horses that are compatible with one another will allow for an enclosed shed with 3 or 4 sides. These structures should be similar in size to recommendations for stalls: a 10 x 10 minimum per horse. The same type of structure will not work in pasture with many horses or bands of horses with large ranges in horse dominance orders. An enclosed, four-sided structure may increase injury to horses on the low end of the herd dominance order by the more dominant horses. This type of structure may be inefficient because dominant horses will keep others from having access. Horses have a very strong social order, and for safety, the shelter should be wide rather than deep. Otherwise, boss horses standing in the BNS-11105 R0 11

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.1. PRE-ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS entranceway can block other horses from going in, or a lower status horse can get trapped in the back. Owners should consider 2 or 3 of these structures spread about the area because one long, continuous structure is easily guarded by dominant horses. Structure dimensions will depend on the degree of herd dominance problems. In situations where aggressive behaviour becomes such a problem that horses need to be separated, the low end of the herd order will generally need better refuge because they are the ones that are usually in the least favourable body condition. Anything equine must be built strong enough to withstand considerable abuse. Flimsy cover will not last long and can become unsafe. 3.1.2. BEFORE YOU BEGIN Inspect parts thoroughly to ensure all parts are included in the kit. Separate hardware and layout into groups for easier identification during assembly. Assemble shelter on level ground. You will require 2 people to assemble the shelter. 3.1.3. TOOLS REQUIRED a flat blade screwdriver and a Robertson screwdriver two 3/8 long aligning punches or centering punches cutting pliers pry bar 9/16 and 7/16 wrench and socket with ratchet 5/16 drill bits and drill 12 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.2. HORSE SHELTER LAYOUT & SPECIFICATIONS 3.2. HORSE SHELTER LAYOUT & SPECIFICATIONS Table 3.1 Parts List Item Description 1 Short Roof Section 2 Long Roof Section 3 Sidewall Type 1 4 Sidewall Type 2 5 Sidewall Type 3 6 Top Sidewall Type 1 7 Top Sidewall Type 2 8 Beam Section 9 Beam Splice Plate 10 Beam Bracket 11 Interior Flashing 12 Exterior Flashing 13 Corrugated Stiffener 14 Post 15 Post Bracket 16 Post Brace 17 Side Channel 18 Rear Corner Brace 19 Front Corner Brace 20 Rear Angle 78 21 Side Channel Extension 22 Roof Wall Section 23 Side Wall Rear Brace BNS-11105 R0 13

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.2. HORSE SHELTER LAYOUT & SPECIFICATIONS 6, 12, 15, 18, & 24 SHELTERS Figure 3.1 14 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.2. HORSE SHELTER LAYOUT & SPECIFICATIONS Figure 3.2 Table 3.2 Horse Shelters - Specifications Model Length Depth Height Weight HS6 6' 9.5' 7.5' 570 lb HS12 12' 9.5' 7.5' 730 lb HS15 15' 9.5 7.5' 811 lb HS18 18' 9.5' 7.5' 889 lb HS24 24' 9.5' 7.5' 1048 lb Figure 3.3 BNS-11105 R0 15

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.3. HORSE SHELTER ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.3. HORSE SHELTER ASSEMBLY 1. Bolt the post bracket (15) and the post brace (16) to the post (14). Bolt the front corner brace (19) to the post (14) but do not tighten these bolts at this time (Figure 3.4). Figure 3.4 2. Bolt together the beam sections (8) using the splice plates (9) and 3/8 x 5/8 bolts (Figure 3.5). Figure 3.5 3. Use the illustrations in Figure 3.6 to determine the overall length that the angle will be. These lengths will also apply to the overall beam length. Bolt together the rear angle (20) pieces using 3/8 x 3/4 bolts with the head of the bolts on the inside (Figure 3.6). 16 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.3. HORSE SHELTER ASSEMBLY Figure 3.6 4. Bolt the side channels (17) to the rear angle (20) using the rear corner brace (18) and 3/8 x 5/8 bolts (Figure 3.7). 5. Bolt together the side channels (17) to the post (14) using the front corner brace (19) and 3/8 x 5/8 bolts (Figure 3.7 and 3.1). Tighten all the bolts at this time. BNS-11105 R0 17

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.3. HORSE SHELTER ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS Figure 3.7 Important: Posts and side channels must form a 90 angle. 6. Bolt the beam (9) to the posts (14) using the post braces (16) and 3/8 x 5/8 bolts. Tighten all the bolts (Figure 3.8). 18 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.3. HORSE SHELTER ASSEMBLY Figure 3.8 Important: Note: 7. If you re using a skid (not included with this shelter), lift the frame up and place the skid under the frame at this time. Make sure the frame is square and level. Ensure that the rounded heads of the bolts are on the inside of the sheets to protect your horses from injury. 8. Bolt the roof-wall section (22) to the rear angle (20) with 3/8 x 5/8 bolts and tighten all the bolts (Figure 3.9). 9. Bolt the ends of the roof sheets (1,2) together in complete arches as shown in Figure 3.9 using 3/8 x 3/4 bolts with the heads on the outside. Tighten these bolts as you go. Attach the assembled arch onto the frame. Alternate the short roof sheet position for optimal strength. 10. The assembled arch should be attached at the top of the frame with the bottom overlapping the already assembled next arch by about 12-18. This arch can be bolted to the top beam. The overlap should gradually reduce as bolts are added from the top to the bottom of the arch. BNS-11105 R0 19

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.3. HORSE SHELTER ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS Figure 3.9 11. Bolt the corner brackets (23) to the roof-wall section (22) with 3/8 x 5/8 bolts and tighten the bolts (Figure 3.10). 12. Bolt the interior flashing (11) and the exterior flashing (12) to the roof starting from the bottom. Do not tighten these bolts at this time (Figure 3.10). 20 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.3. HORSE SHELTER ASSEMBLY Figure 3.10 13. Beginning at the back and working forward, bolt on the sidewall sheets (3,4,5) and the top sidewall sheets (6,7) between the exterior and interior flashings using 3/8 x 5/8 bolts (Figure 3.11 and 3.1). There are left and right sidewalls; ensure that the bolt holes in the sidewalls are flush with the side channels. BNS-11105 R0 21

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.3. HORSE SHELTER ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS Figure 3.11 14. Install edge trim on the exterior flashing, starting from the bottom and working up to the top. Cut off excess trim. Push the flashing in toward the roof sections and tighten all bolts (Figure 3.12). 15. Drill and bolt through flashings using 1/4 x 1 bolts. Attach the side channel cover (17) using 3/8 x 2 bolts (Figure 3.12). 16. Attach the corrugated stiffeners (13), starting at the rear of the shelter working forward using 3/8 x 1 1/8 bolts with the head on the outside (Figure 3.12). 22 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 3. ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 3.3. HORSE SHELTER ASSEMBLY Figure 3.12 BNS-11105 R0 23

3. ASSEMBLY APPLEGATE - HORSE SHELTERS 3.3. HORSE SHELTER ASSEMBLY 6, 12, 15, 18, & 24 SHELTERS 24 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 4. APPENDIX 6, 12, 15, 18, & 24 SHELTERS 4.1. PARTS LIST 4. Appendix 4.1. PARTS LIST Table 4.1 6 Horse Shelter Part Number Part Name Qty 202-2534 8' CRATE 1 BTS-10900 SHORT ROOF SECTION 2 BTS-10902 LONG ROOF SECTION 3 BTS-10932 ROOFWALL SHEET 2 BTS-10933 HS SIDEWALL TYPE 1 2 BTS-10934 HS SIDEWALL TYPE 2 LEFT 1 BTS-10935 HS SIDEWALL TYPE 3 LEFT 1 BTS-10936 HS SIDEWALL TYPE 2 RIGHT 1 BTS-10937 HS SIDEWALL TYPE 3 RIGHT 1 BTS-10938 SIDEWALL TOP TYPE 1 LEFT 1 BTS-10939 SIDEWALL TOP TYPE 2 LEFT 1 BTS-10944 SIDEWALL TOP TYPE 1 RIGHT 1 BTS-10945 SIDEWALL TOP TYPE 2 RIGHT 1 BTS-10940 SIDEWALL REAR BRACE 2 BTS-10941 HS EXTERIOR FLASHING 8 BTS-10913 INTERIOR FLASHING 8 BRS-10914 BEAM SECTION 72 1 BTS-10915 BEAM BRACKET 2 BTS-10942 HS POST 2 BTS-10920 POST BRACKET 4 BTS-10921 POST BRACE 2 BTS-10922 SIDE CHANNEL 4 BTS-10943 SIDE CHANNEL EXTENSION 4 BTS-10923 REAR CORNER BRACE 2 BTS-10924 FRONT CORNER BRACE 2 BTS-10918 REAR ANGLE 72 1 BTB-BPST CORRUGATED STIFFENER 12 BTS-70905 6' HORSE SHELTER BOLT BAG 1 313-2306 3/8" X 5/8" BUTTON HEAD BOLT 330 313-2300 3/8" X 1-1/8" BIN BOLT 70 313-2304 3/8" X 2-1/2" BOLT 12 309-1769 3/8" FLANGE NUT 410 306-1878 1/4" X 3/4" SELF-TAPPING SCREW 12 313-2310 1/4" X 1-1/4" BIN BOLT 36 309-1704 1/4" FLANGE NUT 36 532-2545 EDGE TRIM 2 915-2546 #4 ROBERTSON SCREWDRIVER BIT 2 BNS-11105 R0 25

4. APPENDIX APPLEGATE - HORSE SHELTERS 4.1. PARTS LIST 6, 12, 15, 18, & 24 SHELTERS Table 4.2 12 Horse Shelter Part Number Part Name Qty 202-2534 8' CRATE 1 BTS-10900 SHORT ROOF SECTION 4 BTS-10902 LONG ROOF SECTION 6 BTS-10932 ROOFWALL SHEET 4 BTS-10933 HS SIDEWALL TYPE 1 2 BTS-10934 HS SIDEWALL TYPE 2 LEFT 1 BTS-10935 HS SIDEWALL TYPE 3 LEFT 1 BTS-10936 HS SIDEWALL TYPE 2 RIGHT 1 BTS-10937 HS SIDEWALL TYPE 3 RIGHT 1 BTS-10938 SIDEWALL TOP TYPE 1 LEFT 1 BTS-10939 SIDEWALL TOP TYPE 2 LEFT 1 BTS-10944 SIDEWALL TOP TYPE 1 RIGHT 1 BTS-10945 SIDEWALL TOP TYPE 2 RIGHT 1 BTS-10940 SIDEWALL REAR BRACE 2 BTS-10941 HS EXTERIOR FLASHING 8 BTS-10913 INTERIOR FLASHING 8 BRS-10914 BEAM SECTION 72 2 BTS-10925 BEAM SPLICE PLATE 1 BTS-10915 BEAM BRACKET 2 BTS-10942 HS POST 2 BTS-10920 POST BRACKET 4 BTS-10921 POST BRACE 2 BTS-10922 SIDE CHANNEL 4 BTS-10943 SIDE CHANNEL EXTENSION 4 BTS-10923 REAR CORNER BRACE 2 BTS-10924 FRONT CORNER BRACE 2 BTS-10928 REAR ANGLE 78 2 BTB-BPST CORRUGATED STIFFENER 12 BTS-70906 12' HORSE SHELTER BOLT BAG 1 313-2306 3/8" X 5/8" BUTTON HEAD BOLT 510 313-2300 3/8" X 1-1/8" BIN BOLT 55 313-2303 3/8" X 2" BOLT 12 309-1769 3/8" FLANGE NUT 605 306-1878 1/4" X 3/4" SELF-TAPPING SCREW 12 313-2310 1/4" X 1-1/4" BIN BOLT 36 309-1704 1/4" FLANGE NUT 36 532-2545 EDGE TRIM 2 915-2546 #4 ROBERTSON SCREWDRIVER BIT 2 26 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 4. APPENDIX 6, 12, 15, 18, & 24 SHELTERS 4.1. PARTS LIST Table 4.3 15 Horse Shelter Part Number Part Name Qty 202-2534 8' CRATE 1 BTS-10900 SHORT ROOF SECTION 4 BTS-10902 LONG ROOF SECTION 8 BTS-10932 ROOFWALL SHEET 5 BTS-10933 HS SIDEWALL TYPE 1 2 BTS-10934 HS SIDEWALL TYPE 2 LEFT 1 BTS-10935 HS SIDEWALL TYPE 3 LEFT 1 BTS-10936 HS SIDEWALL TYPE 2 RIGHT 1 BTS-10937 HS SIDEWALL TYPE 3 RIGHT 1 BTS-10938 SIDEWALL TOP TYPE 1 LEFT 1 BTS-10939 SIDEWALL TOP TYPE 2 LEFT 1 BTS-10944 SIDEWALL TOP TYPE 1 RIGHT 1 BTS-10945 SIDEWALL TOP TYPE 2 RIGHT 1 BTS-10940 SIDEWALL REAR BRACE 2 BTS-10941 HS EXTERIOR FLASHING 8 BTS-10913 INTERIOR FLASHING 8 BRS-10929 BEAM SECTION 60 3 BTS-10925 BEAM SPLICE PLATE 2 BTS-10915 BEAM BRACKET 2 BTS-10942 HS POST 2 BTS-10920 POST BRACKET 4 BTS-10921 POST BRACE 2 BTS-10922 SIDE CHANNEL 4 BTS-10943 SIDE CHANNEL EXTENSION 4 BTS-10923 REAR CORNER BRACE 2 BTS-10924 FRONT CORNER BRACE 2 BTS-10930 REAR ANGLE 66 3 BTB-BPST CORRUGATED STIFFENER 12 BTS-70907 15' HORSE SHELTER BOLT BAG 1 313-2306 3/8" X 5/8" BUTTON HEAD BOLT 600 313-2300 3/8" X 1-1/8" BIN BOLT 55 313-2303 3/8" X 2" BOLT 12 309-1769 3/8" FLANGE NUT 680 306-1878 1/4" X 3/4" SELF-TAPPING SCREW 12 313-2310 1/4" X 1-1/4" BIN BOLT 36 309-1704 1/4" FLANGE NUT 36 532-2545 EDGE TRIM 2 915-2546 #4 ROBERTSON SCREWDRIVER BIT 2 BNS-11105 R0 27

4. APPENDIX APPLEGATE - HORSE SHELTERS 4.1. PARTS LIST 6, 12, 15, 18, & 24 SHELTERS Table 4.4 18 Horse Shelter Part Number Part Name Qty 202-2534 8' CRATE 1 BTS-10900 SHORT ROOF SECTION 6 BTS-10902 LONG ROOF SECTION 9 BTS-10932 ROOFWALL SHEET 6 BTS-10933 HS SIDEWALL TYPE 1 2 BTS-10934 HS SIDEWALL TYPE 2 LEFT 1 BTS-10935 HS SIDEWALL TYPE 3 LEFT 1 BTS-10936 HS SIDEWALL TYPE 2 RIGHT 1 BTS-10937 HS SIDEWALL TYPE 3 RIGHT 1 BTS-10938 SIDEWALL TOP TYPE 1 LEFT 1 BTS-10939 SIDEWALL TOP TYPE 2 LEFT 1 BTS-10944 SIDEWALL TOP TYPE 1 RIGHT 1 BTS-10945 SIDEWALL TOP TYPE 2 RIGHT 1 BTS-10940 SIDEWALL REAR BRACE 2 BTS-10941 HS EXTERIOR FLASHING 8 BTS-10913 INTERIOR FLASHING 8 BRS-10914 BEAM SECTION 72 3 BTS-10925 BEAM SPLICE PLATE 2 BTS-10915 BEAM BRACKET 2 BTS-10942 HS POST 2 BTS-10920 POST BRACKET 4 BTS-10921 POST BRACE 2 BTS-10922 SIDE CHANNEL 4 BTS-10943 SIDE CHANNEL EXTENSION 4 BTS-10923 REAR CORNER BRACE 2 BTS-10924 FRONT CORNER BRACE 2 BTS-10928 REAR ANGLE 78 3 BTB-BPST CORRUGATED STIFFENER 12 BTS-70908 18' HORSE SHELTER BOLT BAG 1 313-2306 3/8" X 5/8" BUTTON HEAD BOLT 690 313-2300 3/8" X 1-1/8" BIN BOLT 55 313-2303 3/8" X 2" BOLT 12 309-1769 3/8" FLANGE NUT 770 306-1878 1/4" X 3/4" SELF-TAPPING SCREW 12 313-2310 1/4" X 1-1/4" BIN BOLT 36 309-1704 1/4" FLANGE NUT 36 532-2545 EDGE TRIM 2 915-2546 #4 ROBERTSON SCREWDRIVER BIT 2 28 BNS-11105 R0

APPLEGATE - HORSE SHELTERS 4. APPENDIX 6, 12, 15, 18, & 24 SHELTERS 4.1. PARTS LIST Table 4.5 24 Horse Shelter Part Number Part Name Qty 202-2534 8' CRATE 1 BTS-10900 SHORT ROOF SECTION 8 BTS-10902 LONG ROOF SECTION 12 BTS-10932 ROOFWALL SHEET 8 BTS-10933 HS SIDEWALL TYPE 1 2 BTS-10934 HS SIDEWALL TYPE 2 LEFT 1 BTS-10935 HS SIDEWALL TYPE 3 LEFT 1 BTS-10936 HS SIDEWALL TYPE 2 RIGHT 1 BTS-10937 HS SIDEWALL TYPE 3 RIGHT 1 BTS-10938 SIDEWALL TOP TYPE 1 LEFT 1 BTS-10939 SIDEWALL TOP TYPE 2 LEFT 1 BTS-10944 SIDEWALL TOP TYPE 1 RIGHT 1 BTS-10945 SIDEWALL TOP TYPE 2 RIGHT 1 BTS-10940 SIDEWALL REAR BRACE 2 BTS-10941 HS EXTERIOR FLASHING 8 BTS-10913 INTERIOR FLASHING 8 BRS-10914 BEAM SECTION 72 4 BTS-10925 BEAM SPLICE PLATE 3 BTS-10915 BEAM BRACKET 2 BTS-10942 HS POST 2 BTS-10920 POST BRACKET 4 BTS-10921 POST BRACE 2 BTS-10922 SIDE CHANNEL 4 BTS-10943 SIDE CHANNEL EXTENSION 4 BTS-10923 REAR CORNER BRACE 2 BTS-10924 FRONT CORNER BRACE 2 BTS-10928 REAR ANGLE 78 4 BTB-BPST CORRUGATED STIFFENER 12 BTS-70909 24' HORSE SHELTER BOLT BAG 1 313-2306 3/8" X 5/8" BUTTON HEAD BOLT 870 313-2300 3/8" X 1-1/8" BIN BOLT 55 313-2303 3/8" X 2" BOLT 12 309-1769 3/8" FLANGE NUT 950 306-1878 1/4" X 3/4" SELF-TAPPING SCREW 12 313-2310 1/4" X 1-1/4" BIN BOLT 36 309-1704 1/4" FLANGE NUT 36 532-2545 EDGE TRIM 2 915-2546 #4 ROBERTSON SCREWDRIVER BIT 2 BNS-11105 R0 29

4. APPENDIX APPLEGATE - HORSE SHELTERS 4.1. PARTS LIST 6, 12, 15, 18, & 24 SHELTERS 30 BNS-11105 R0

PART NUMBER: BNS-11105 R0 REVISED: 30/10/09

Applegate Livestock Equipment Inc. Is a Division of Ag Growth International Inc. Group P.O Box 151 902 South St. Rd. 32 Union City, IN 47390 phone: 800-354-9502 fax: 765-964-3529 website: www.applegatelivestockequipment.com Ag Growth Industries Limited Partnership 2009 32