High-Performance Rail Curve & Switch Plate Lubricants AHEAD of the CURVE. n Environmentally friendly n Less wheel and track wear n Lengthens equipment life cycle
High-Performance Rail Curve & Switch Plate Lubricants UltraLube rail curve and switch plate lubricants provide better lubricity than conventional lubricants to prolong the life of your railroad. UltraLube s rail lubricants were developed specifically for the highly specialized railroad industry. They offer superior lubricity to reduce wheel and track wear and extend equipment life. In addition, UltraLube s biobased products are biodegradable and non-toxic, minimizing cleanup time. Superior Performance n UltraLube base oils have * the lubricity of petroleum base oils n Naturally higher viscosity, which reduces friction, heat and wear especially in high-speed applications n Last longer than petroleum-based lubricants and are less likely to thin down at higher temperatures n Higher flash and fire points than petroleum-based products n Mix readily with conventional petroleum-based products GETS IN, STAYS ON Powerful, professional-grade UltraLube instantly penetrates, creating long-lasting bonds to metal. n Vegetable-based oil molecules are polar; they bond and adhere to metal. Petroleum-based oil molecules aren t; they simply run off. Eco-Safe AND NON-TOXIC UltraLube lubricants are professional-grade, eco-safe, non-toxic products manufactured from a renewable resource biodegradable vegetable base stock oil and made in the USA. n Biodegradable n Base oil is derived from vegetables a renewable resource n Contain no zinc or chlorine n No harsh odors n Neutral in water n Are safer for your workers and the environment * Test (ASTM D3233) conducted by the National Ag-Based Lubricants Center (NABL) using UltraLube high oleic base oil and three different viscosities of petroleum base oils. Compare the UltraLube base oil result of 1,756 lbf (pounds of force) to the average of petroleum base oils of 434 lbf UltraLube has four times the lubricity, or friction-reducing capability, of petroleum-based oil.
High-Performance Rail Curve & Switch Plate Lubricants Lo-Visc Rail Curve Grease n Designed for wayside applicators with wide temperature requirements n Ideal for prolonged cold temperatures n Suitable for Hi-Rail applications n Pumps and carries when using wayside application equipment and grease temperature is between 0 F (-18 C) and 100 F (38 C) n Recommended for heavy load applications such as coal trains n Recommended for environmentally sensitive areas near waterways n Contains advanced extreme pressure additives for unsurpassed protection from wear n Reduces friction and wear between track and wheel flange n Formulated to resist port plugging in wiping bars n Longer carry down and increased retention n Better gauge face coefficient of friction than most petroleum-based greases n Less migration to top of rail than major petroleum-based greases n Improves fuel efficiency and superior lubricity n Higher flash point than petroleum greases n Biodegradable formula n Meets EPA s Environmental Preferable Purchasing (EPP) criteria n Meets USDA s proposed biobased product definition for EO13101 10955 (not shown) 35 lb. (15.8 kg) plastic pail. 10956 (not shown) 400 lb. (181.4 kg) drum. With MoS 2 (Molybdenum Disulphide) 10965 (not shown) 35 lb. (15.8 kg) plastic pail. 10966 (not shown) 400 lb. (181.4 kg) drum. Hi-Visc Rail Curve Grease n Designed for wayside applicators with wide temperature requirements n For use in mechanical or electric gauge face lubricators n Pumps and carries when using wayside application equipment and grease temperature is between 35 F (2 C) and 160 F (71 C) n Recommended for heavy load applications such as coal trains n Recommended for environmentally sensitive areas near waterways n Contains advanced extreme pressure additives and graphite for excellent protection against wheel and rail wear n Reduces friction and wear between track and wheel flange n Formulated to resist port plugging in wiping bars n Longer carry down track from lubricator n Better gauge face coefficient of friction than most petroleum-based greases n Less migration to top of rail than major petroleum-based greases Switch Plate Lube n For railroad switches n Can be poured, brushed, wiped or sprayed on with mechanical sprayers n Biodegradable and virtually non-toxic n Eliminates caustic and toxic chemicals n Less flammable than petroleum-based lubricants n Resists washout from rain or ice melting n Good penetration into switch n Improves fuel efficiency and superior lubricity n Higher flash point than petroleum greases n Biodegradable formula reduces damage to the environment n Meets EPA s EPP criteria n Meets USDA s proposed biobased product definition for EO13101 10950 35 lb. (15.8 kg) plastic pail. 10951 (not shown) 400 lb. (181.4 kg) drum. With MoS 2 (Molybdenum Disulphide) 10960 (not shown) 35 lb. (15.8 kg) plastic pail. 10961 400 lb. (181.4 kg) drum. 10950 10961 n Resists build-up of dust and dirt n Conforms to EPA s EPP biobased criteria Low Viscosity ISO 46 10972 (not shown) 5 gallon (18.9 l ) plastic pail with pour spout. 10973 (not shown) 55 gallon (208.1 l ) drum. High Viscosity ISO 68 10977 (not shown) 5 gallon (18.9 l ) plastic pail with pour spout. 10978 (not shown) 55 gallon (208.1 l ) drum.
Support Vehicle Lubricants Multi-Purpose Lubricant & Penetrant n Excellent rust and corrosion preventer n Silences squeaks n Frees rusted and sticking parts n Excellent for sliding and rolling components n Reduces friction, heat and wear n Safe for plastic parts n Contains no zinc or chlorine n Silicone-free formula n Flash Point 590 F / 310 C n Pour Point -4 F / -20 C 10443 (not shown) 8 oz. (227 grams) aerosol. 10444 12 oz. (340 grams) aerosol. 12 per case-cut carton. 10445 (not shown) 2 fl. oz. (59 ml) pump spray. 24 per countertop display carton. 10446 8 fl. oz. (224 ml) trigger spray. 10447 (not shown) 1 quart (.946 l) refill with yorker cap for easy refilling. 12 per carton. 10448 (not shown) 1 gallon (3.78 l) refill. 4 per carton. 10449 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10450 (not shown) 55 gallon (208.1) drum. 10444 10446 Industrial-Grade Penetrant n Formulated specifically to penetrate and loosen rusted and frozen metallic parts n Deters water and leaves behind a protective film to help prevent future rust and corrosion n Low viscosity formula creeps in all directions, attacking rust in the most difficult-to-reach places n Ideal for rusted nuts, bolts, hinges and restoration projects n Excellent for exhaust systems and shock and strut mounting bolts n No harsh odor and a 2X higher flash point than most conventional penetrants n Flash Point 331 F (166 C) n Pour Point -4 F / -20 C n Silicone-free formula 10460 (not shown) 8 fl. oz. (224 ml) trigger spray. 10461 1 quart (.946 l) refill with yorker cap for easy refilling. 12 per carton. 10462 1 gallon (3.78 l) refill. 4 per carton. 10463 (not shown) 11 oz. (311 grams) aerosol. 12 per carton. 10461 10462 Industrial-Grade Rust & Corrosion Inhibitor n Formulated as a preventative coating for all ferrous metal to prevent rust and corrosion during storage n Locks out the elements to protect equipment n Protects lawn mower decks, snow removal, agricultural and construction equipment n Silicone-free formula n Biobased, biodegradable, non-toxic formula is safe for the environment n Outstanding corrosion protection for trucks, trailers and heavy-duty equipment n Flash Point 307 F (153 C) 10466 11 oz. (311 grams) aerosol. 12 per carton. 10466 Industrial-Grade Lubricant n Penetrates and bonds to metal for long-lasting superior lubrication n Formulated to work under high-heat and high-load conditions n For use on chains, slides, rollers, hinges, pivot points, gears, cables, metal-to-metal contact areas or oil lubricated bearings n Flash Point 581 F (305 C) n Pour Point -17 F (-27 C) 10464 11 oz. (311 grams) aerosol. 12 per carton. 10465 8 fl. oz. (224 ml) trigger spray. 10464 10465
Support Vehicle Lubricants Multi-Purpose Lithium Grease n Delivers long-lasting high performance n Contains advanced EP additives n Prevents rust and corrosion for metal-tometal contact areas, heavy load and extreme pressure applications n USDA BioPreferred grease n NLGI Grade 2, LB Rating n Drop Point 374 F (190 C) n Flash Point 619 F (326 C) n Operating Temperature Range -40 F (-40 C) to +274 F (+134 C) n Base Type Lithium, Color Amber 10300 (not shown) 3 oz. (85 grams) cartridge. 3 cartridges per bag. Total 9 oz. (255 grams) 10 bags per case-cut carton. 10301 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10302 16 oz. (454 grams) tub. 10303 (not shown) 35 lb. (15.8 kg) plastic pail. 10304 (not shown) 120 lb. (54.4 kg) metal drum. 10305 (not shown) 400 lb. (181.4 kg) metal drum. 10302 10301 Low-Temperature Multi-Purpose Lithium Grease n Special low-temperature, cold weather climate grease n Formulated to pump easily at temperatures to -20 F (-30 C) n Same features and applications as UltraLube Multi-Purpose Lithium Grease n Drop Point 381 F (194 C) n Flash Point 619 F (326 C) n Operating Temperature Range -22 F (-30 C) to +302 F (+150 C) n Base Type Lithium Complex, Color Red 10373 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10374 35 lb. (15.8 kg) plastic pail. 10373 10374 Chassis & Bearing Grease LMX Red Grease n High water washout resistant EP grease n Ideal for wheel bearings and trailer bearings n Ideal for greasing chassis components (tie rods, idler arms, etc.) and sliding components n Contains EP additives to protect parts under heavy shock loads n Protects all ferrous metals from rust and corrosion n Replaces and mixes freely with petroleum based greases n NLGI Grade 2 n Meets NLGI GC-LB rating n Drop Point 527 F (275 C) n Flash Point 619 F (326 C) 10320 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10321 16 oz. (454 grams) tub. 10322 35 lb. (15.8 kg) plastic pail. 10323 (not shown) 120 lb. (54.4 kg) metal drum. 10324 (not shown) 400 lb. (181.4 kg) metal drum. n Operating Temperature Range -40 F (-40 C) to +427 F (+219 C) n Base Type Lithium Complex, Color Red 10321 10320 10322
Visit us online at UltraLube.com UltraLube professional-grade lubricants are available at retail stores across North America. Our products are also available for wholesale purchase for business purposes through national and local industrial suppliers and automotive distributors. Visit UltraLube.com to find out where to buy. Download a catalog online Visit our online resource center to download the UltraLube product catalog. www.ultralube.com/productcatalog Distributed by: NOT AFRAID OF THE DAILY GRIND. Plews & Edelmann 1550 Franklin Grove Road, Dixon, IL 61021 USA Telephone: 800-770-4639, Fax: 815-288-3388 Reduces heat, smoke Higher flash points Longer tool life www.ultralube.com www.facebook.com/ultralube 2012 Plews & Edelmann Printed in USA High-Performance Rail Curve & Switch Plate Lubricants / PE-0095