ULTRA INKS
ULTRA INKS With a commitment to supplying the printing industry with the highest quality products possible, further development has enabled Ultrachem to produce its successful Ultra range of four-colour process inks more suitable for the fastest, multi-colour presses, giving the printer a userfriendly ink that performs exceptionally well under the most difficult of conditions. CONVENTIONAL PROCESS INK ULTRA INTENSE Excellent gloss and rub resistance Very good lithographic properties Good work/turn properties ULTRA SPEED Very good lithographic properties Very good rub resistance Excellent gloss Very good work/turn properties ULTRA ECO Excellent rub resistance Very good gloss Low misting ULTRA HD Hard drying - excellent rub resistance Ideal for fast processing Good gloss Non duct fresh ULTRA GP Excellent lithographic properties Good rub resistance Good gloss ULTRA VP Very good work/turn properties Very good rub resistance Good gloss
ULTRA UV LITHO SERIES The ULTRA UV process and blend bases are manufactured in Bristol using the latest technology and offering excellent press performance. Suitable for application on Sheet-fed and Web Off-set press types and compatible with most commercial fount additives. All Goldeneye inks are formulated using the highest quality raw materials. ULTRA Suitable for coated and un-coated paper and folding board, Corona treated polyethylene board, Primed foil laminate board and metallised polyester laminated board. Compliant raw materials Free flowing characteristics 20-30% of materials are from a renewable source Excellent Lithographic properties Suitable to run with very little or zero alcohol Excellent colour strength and transfer properties Suitable for press speeds up to 18,000 impressions per hour Does not contain ITX or Benzophenone or any of their derivatives.
ULTRA PLASTIC Designed to adhere to non absorbent substrates including plastic. Suited for coated and uncoated paper/board. Corona treated Polyethylene coated board. Primed foil laminate board. Primed metallised Polyester laminated board. Treated Polypropylene Polyester, Polystyrene, PVC. Adhesion tests recommended prior to printing. Excellent ink/water balance High reactivity Positive solid colour cure speeds Compliant raw materials Excellent colour strength Suitable to run with reduced or zero alcohol Does not contain ITX or Benzophenone or any of their derivatives
ULTRA UV INKS ULTRA LM SERIES Low migration range for food and pharmaceutical industry which allows printing on the outer side of primary food packaging. High colour strength Excellent cure speed 12000-18000 sheets per hour High molecular acrylates and photo-initiators Compliant for food packaging These inks contain up to 20/30% of materials from a renewable source Suitable to run with reduced or zero alcohol CHARACTERISTICS ULTRA ULTRA LM ULTRA PLASTIC 18,000 IMP/H PRESS SPEED HIGH CROSS LINK DENSITY LOW MIGRATION LOW ODOUR ISO 286-1 COMPLIANT BCF "APC" COMPLIANT EXCELLENT LITHO PROPERTIES OPTIMUM Excellent ink/water COLOUR balance STRENGTH MIXING Positive solid INKS colour AVAILABLE cure speeds. PAPER Good flow & Conform BOARD to the SUBSTRATES Acrylate Preference P.E. Criteria COATED APC BOARD PRIMED Does not contain FOIL ITX LAMINATE or it s derivatives, BOARD or METALLISED Benzophenone and POLYESTER its derivatives. LAMINATED BOARD PLASTIC SUBSTRATES IE PVC, PE, PP LOW TACK VERSION FOR WEB SUITABILITY FOR LASER MIGRATION POTENTIAL over 50ppb under 10ppb (TEST) over 50ppb AVAILABLE IN 2.5KG AVAILABLE IN 5KG AVAILABLE IN BARRELS
SALES OFFICE: TEL: + (0) 207 055 1530 FAX: + (0) 207 055 5197 SALES: sales@ultrachem.co.uk www.ultrachem.co.uk Coated with UVC201 NEBULA UV CURABLE HIGH GLOSS LACQUER