Eco Deco Building System ALUMINUM COMPOSITE PANEL
Introduction Eco Deco Aluminium Honeycomb Panel is a Green Product Eco Deco aluminium honeycomb panel is diligently manufactured by two aluminium sheets and a honeycomb core of aluminium. This composite panel technology is initially used in aerospace, transport & ship building by taking the advantages of its light weightiness, corrosive resistance, high rigidity & formability. With advanced development, honeycomb panel is nowadays widely adopted by building industry as a choice of materials as either external or internal façade cladding where high demands of specifications are required. Eco Deco aluminium honeycomb panel provides a variety of façade materials for the stringent demand of your project. Choice of Treatments on Façade : Vinyl sheet or tile Decorative or Compact Laminated Sheet Powered coating / American PPG fluoride carbon Glazing Non Combustible Ceramic Coating Wood veneer Vinyl Sheet Laminated Fire proof Glazing Sheet ceramic coating PVDF & Powder coating Natural Stone Fabric Wood Veneer
Compression, Strength & Rigidity Flatwise Tensile Strength 1.82MPa Flatwise Compression Strength 4.26MPa Flatwise Compression Elastic Modulus 74.8MPa Flatwise shear strength 1.4MPa Flatwise Shear Flatwise Compression 18.6MPa Climbing Drum Peel Strength 214Ncm/cm Flexural Strength 231MPa Flexural Rigidity 1.4x10 9 MPa Tested according to GJB130-1986 on 14mm thick panel (Test method for properties of adhesive bonded aluminium honeycomb sandwich structure & core) Thickness (mm) 6 10 15 20 25 Front Sheet (mm) 0.6 0.8 0.9 1.0 1.0 Back Sheet (mm) 0.5 0.7 0.8 0.8 0.8 Weight (kg/m 2 ) 4.9 5.3 7.0 7.4 7.8 Acoustic Insulation Index 29 db Tested to GBJ75-84 & JGJ11-82 Acid & Alkaline Resistance No Change tested to GB/T 17748-1999 Impact resistance No crack, No delaminated paint tested to GB/T 17748-1999 Loading Strength at 0.15kN loading (Result: non detectable flat-wise change) at 0.56kN loading (Result: detectable change of less than 1.9mm) Non Combustibility Comply with BS476 Part 4 (Ceramic Coating)
Eco Deco Building System ALUMINUM COMPOSITE PANEL The material structure High Strength Epoxy Resin Bonding Layer High grade aluminium honeycomb Fully Imported Aluminum Ingot The application Cladding for interior and exterior wall of buildings Amalgamated with natural stone for anesthetic effect with light weight requirement Buildings demanding reduction of heat, sound & shock Damp bath rooms in where conduits of services are sealed by the panels Using for partitioning materials for luxury yacht & as aerospace building materials The characteristics Even coating, various colors, high bending strength & rigidity Superior corrosive resistance Rust free Outstanding fireproof characteristic by ceramic coating (comply with BS476 part 4- Non combustible) Shock proof, damp-proof, Sound proof a reduction of 29dB Easy to clean and maintain. Easy to install. The standard specification Thickness (T) : 6mm, 10mm, 12mm, 15mm, 18mm, 20mm, 22mm, 25mm, 30mm Width (W) : 1220mm 1350mm Length (L): 2440mm or other lengths upon special requests.
Typical Installation of Eco Deco Aluminium Composite Panels (1) Erection of sub-frame (2) Installation of panels (3) Hassle free corner work (4) Fixing by self tapping (4) Openings can be cut out (5) Quick, easy & tidy installation screws on built-in lugs by jigsaw.
Eco Deco Aluminium Honeycomb Composite Panels Light weight, flatness, high rigidity and free of rust & termites Built in lugs for quick installation Stone effected vinyl sheet as finish Any size of cut-out made easy.
Eco Deco s versatile finishes to meet different situational requirements Artificial Stone High Pressure laminates Artificial Stone Sand Stone Granite Rustic Sand Stone
Eco Deco s versatile façades to meet different situational requirements Vinyl tiles with gout Built in lugs Wood pattern vinyl sheet Vinyl sheet with granite pattern