BioBank TM cdna Kit Instructions for the use of BioBank TM cdna in real-time PCR BB BioBank control cdna
Contents Introduction 3 Kit Contents 4 Reagents and Equipment to Be Supplied by User 4 PrimerDesign Satisfaction Guarantee 5 Quality Control 5 Bench-side Protocol 6 Amplification Protocol 8 2
Introduction The BioBank TM a high quality source of cdna validated for use in real-time PCR experiments. The cdna is reverse transcribed from high quality DNAse treated RNA from a variety of sources using an optimised blend of Oligo-dT and random nonamer primers. BioBank TM cdna is therefore essentially free of genomic DNA and PCR inhibitors and covers the widest possible range of RNA and mrna transcripts in the specified tissue or cell line. BioBank TM cdna is useful for expression profiling of newly identified genes, and also as a positive control for the real-time PCR step. Positive control Primers Positive control primers and probe are supplied with the kits which detect 18S ribosomal RNA. These primers include a PerfectProbe TM for optimal probe based detection through the FAM channel. However the positive control primers and probe mix can also be used with standard Taqman cycling conditions and with SYBRgreen mastermix for detection using SYBR green chemistry. The positive control primers will give a cycle threshold value of approximately CT=12 depending on the detection chemistry and the particular hardware settings in use. 3
Kit Contents BioBank TM cdna 250ng (PURPLE PURPLE) Control primers and probe for 18S ribosomal RNA (BROWN BROWN) RNAse/ NAse/DNAse free water Reagents and Equipment to Be Supplied by User Real-Time PCR instrument Mastermix or Mastermix components This kit is designed to work well with all commercially available Mastermixes. However, we recommend the use of PrimerDesign 2x Precision TM Mastermix. Pipettors and Tips Vortex and centrifuge Kit Storage The PrimerDesign BioBank TM cdna kit should be stored at -20ºC on arrival. Freeze/thawing cycles should be kept to a minimum once resuspended. Under these conditions reagents are stable for six months from date of resuspension. 4
PrimerDesign Satisfaction Guarantee PrimerDesign takes pride in the quality of all of our products. Should this product fail to perform satisfactorily when used according to the protocols in this manual, PrimerDesign will replace the item free of charge. Quality Control As part of our routine quality assurance programme, all PrimerDesign products are monitored to ensure the highest levels of performance and reliability. 5
Bench-side Protocol 1. Pulse-spin spin each tube in a centrifuge before opening. This will ensure lyophilised primer and probe mix is in the base of the tube and is not spilt upon opening the tube. 2. Resuspend lyophilised primer and probe mix and cdna c in RNAse/DNAse free water provided according to the table below; To ensure complete resuspension, vortex each tube thoroughly, allow to stand for 5 minutes, and vortex again before use. Component Volume BioBank TM cdna (PURPLE PURPLE) 130 µl 18S control primers and probe (BROWN BROWN) 50 µl Real-time PCR 1. Positive control with 18S Make up a well in duplicate containing the positive control primers and BioBank TM cdna Component 1 Reaction Precision TM Mastermix (not included) 10 µl 18S primers and probe (BROWN BROWN) 1 µl BioBank TM cdna (PURPLE PURPLE) 5 µl RNAse/DNAse free water (WHITE WHITE) 4 µl Final volume 20 µl 2. Target gene with PrimerDesign custom designed real-time PCR assay (optional step) Make up a well in duplicate containing the positive control primers and BioBank TM cdna Component 1 Reaction Precision TM Mastermix (not included) 10 µl Target gene primer mix 1 µl BioBank TM cdna (PURPLE PURPLE) 5 µl RNAse/DNAse free water (WHITE WHITE) 4 µl Final volume 20 µl 6
3. Target gene with experimental primers (optional step) Make up a well in duplicate containing the experimental primers and BioBank TM cdna Component 1 Reaction Precision TM Mastermix (not included) 10 µl Forward primer 6pmol Reverse primer 6pmol Probe (optional) 3pmol BioBank TM cdna (PURPLE PURPLE) 5 µl RNAse/DNAse free water (WHITE WHITE) X µl Final volume 20 µl 7
Amplification Protocol The 18S control primers are specifically formulated to work under all recommended realtime PCR cycling conditions. i.e. Taqman cycling, PerfectProbe TM cycling, and SYBR green cycling conditions will all work perfectly with the kit. Amplification conditions using PerfectProbe TM cycling settings Cycling x50 Step Time Temp Enzyme activation 10min 95ºC Denaturation 15s 95ºC DATA COLLECTION* 30s 50ºC Extension 15s 72ºC *Fluorogenic data should be collected during this step through the FAM channel. Amplification conditions using Taqman or SYBR green cycling settings Cycling x50 Step Time Temp Enzyme activation 10min 95ºC Denaturation 15s 95ºC DATA COLLECTION* 60s 60ºC *Fluorogenic data should be collected during this step through the FAM or SYBR channel. 8