Developing participatory welfare state. Can service users produce some essential local knowledge on public services?

Similar documents
Anne Peretz. To cite this version: HAL Id: halshs

Supporting the Design of a Management Accounting System of a Company Operating in the Gas Industry with Business Process Modeling

Agricultural biodiversity, knowledge systems and policy decisions

Collusion through price ceilings? In search of a focal-point effect

Local Government Challenges in post apartheid South Africa

How Resilient Is Your Organisation? An Introduction to the Resilience Analysis Grid (RAG)

Value-Based Design for Gamifying Daily Activities

Conception of a new engineering curriculum in smart buildings

A Performance Measurement System to Manage CEN Operations, Evolution and Innovation

Experiences of Online Co-creation with End Users of Cloud Services

Impact of cutting fluids on surface topography and integrity in flat grinding

Jeanne Fagnani. To cite this version: HAL Id: halshs

A Malthusian model for all seasons?

Estimating traffic flows and environmental effects of urban commercial supply in global city logistics decision support

Electronic Agriculture Resources and Agriculture Industrialization Support Information Service Platform Structure and Implementation

Occupational accidents in Belgian industry in restructuring contexts

Dynamic price competition in air transport market, An analysis on long-haul routes

Heat line formation during roll-casting of aluminium alloys at thin gauges

A new emerging rural world. An overview of rural change in Africa, Atlas for the Nepad Rural Futures programme,

Composite Simulation as Example of Industry Experience

Designing and Implementing a Framework for Process-Oriented Logistics-Costs Measurement in an Automotive-Supplier Group

Working with Communities to Improve Dignity: The Case of Improved Bio-Centres in Kenya

Facility Layout Planning of Central Kitchen in Food Service Industry: Application to the Real-Scale Problem

Distribution Grid Planning Enhancement Using Profiling Estimation Technic

Comparison of lead concentration in surface soil by induced coupled plasma/optical emission spectrometry and X-ray fluorescence

Physical properties of epoxy and free volume evaluated by positron annihilation spectroscopy

An Outlook for the Non-Compliance Mechanism of the Kyoto Protocol on Climate Change

Towards a Modeling Framework for Service-Oriented Digital Ecosystems

New experimental method for measuring the energy efficiency of tyres in real condition on tractors

Balanced Scorecard leading indicators to monitor performance variability in OHS management systems.

Conceptual Design of an Intelligent Welding Cell Using SysML and Holonic Paradigm

Comparative and Targeted Advertising in Competitive Markets

Size distribution and number concentration of the 10nm-20um aerosol at an urban background site, Gennevilliers, Paris area

Can combining web and mobile communication channels reveal concealed customer value?

Progress of China Agricultural Information Technology Research and Applications Based on Registered Agricultural Software Packages

Decomposing Packaged Services Towards Configurable Smart Manufacturing Systems

Exploring Different Faces of Mass Customization in Manufacturing

Simulation for Sustainable Manufacturing System Considering Productivity and Energy Consumption

Change Management and PLM Implementation

Managing Systems Engineering Processes: a Multi- Standard Approach

Drum- and -Disc-Engine with Shape Memory Wires

Interaction between mechanosorptive and viscoelastic response of wood at high humidity level

A framework to improve performance measurement in engineering projects

ATOM PROBE ANALYSIS OF β PRECIPITATION IN A MODEL IRON-BASED Fe-Ni-Al-Mo SUPERALLOY

A Rational Irrational Man?

Simulation of Dislocation Dynamics in FCC Metals

High Purity Chromium Metal Oxygen Distribution (Determined by XPS and EPMA)

Pressure effects on the solubility and crystal growth of α-quartz

Effect of the Hydrogen Induced Degradation of Steel on the Internal Friction Spectra

The microstructure evolution of Fe-Si alloys solidified in a high static magnetic field

Designing work organization based on profession collectives and inter-profession relations

Economic analysis of maize/soyabean intercrop systems by partial budget in the Guinea savannah of Nigeria

Densification superficielle de matériaux poreux par choc laser

Monitoring of Collaborative Assembly Operations: An OEE Based Approach

An update on acoustics designs for HVAC (Engineering)

Computerized simulation of thermal behaviour during forging sequences

Structure/property relationships in HSLA steel with low carbon and manganese and increased silicon content

HIGH DAMPING IN GREY CAST IRON

THERMAL PULSE ANNEALING OF TITANIUM AND TANTALUM SILICIDES

NANOINDENTATION-INDUCED PHASE TRANSFORMATION IN SILICON

Recycling Technology of Fiber-Reinforced Plastics Using Sodium Hydroxide

Optimal Storage Assignment for an Automated Warehouse System with Mixed Loading

THE INTERPRETATION OF ELECTRON DIFFRACTION PATTERNS FROM Ni-Al MARTENSITE

Performance evaluation of centralized maintenance workshop by using Queuing Networks

Optimization of operating conditions of a mini fuel cell for the detection of low or high levels of CO in the reformate gas

DIFFICULTIES IN GRAIN REFINING ALUMINUM LITHIUM ALLOYS USING COMMERCIAL Al-Ti AND Al-Ti-Bor MASTER ALLOYS

Effects of temperature on monotonic and fatigue properties of carbon fibre epoxy cross ply laminates

Reconfigurable manufacturing system design: The case of mobile manufacturing system

Finite Element Model of Gear Induction Hardening

CHEMICAL VAPOR DEPOSITION OF IR-TRANSMITTING ZINC SULPHIDE

Environmental Impact of PV Systems: Effects of Energy Sources Used in Production of Solar Panels

Decentralized Control Architecture for UAV-UGV Cooperation

The Effect of Stress Ageing on the Properties of Shape Memory Alloys

Induction hardening of small gear wheels made of steel 50CrMo4

New approach of envelope dynamic analysis for milling process

Fatigue of High Purity Copper Wire

Non destructive observation by X-ray diffraction on a berlinite crystal

A quantitative analysis of health, safety and environment policy in France

CVD COATING OF CERAMIC LAYERS ON CERAMIC CUTTING TOOL MATERIALS

Energy savings potential using the thermal inertia of a low temperature storage

Transferability of fish habitat models: the new 5m7 approach applied to the mediterranean barbel (Barbus Meridionalis)

Grain growth and Ostwald ripening in chromia-doped uranium dioxide

Development of Plasma Heating and Electromagnetic Stirring in Tundish

KPY 12 - A PRESSURE TRANSDUCER SUITABLE FOR LOW TEMPERATURE USE

Layout Design by Integration of Multi-agent Based Simulation and Optimization

The Reverse Logistics Technology and Development Trend of Retired Home Appliances

A Digital Management System of Cow Diseases on Dairy Farm

STRAIN RATE DEPENDENCE ON MECHANICAL PROPERTIES IN SOME COMMERCIAL ALUMINUM ALLOYS

Aeration control in a full-scale activated sludge wastewater treatment plant: impact on performances, energy consumption and N2O emission

An Innovative Framework Supporting SME Networks for Complex Product Manufacturing.

Characterising the impact of surface integrity on the fatigue behaviour of a shot-peened connecting rod

Production Cost Analysis and Production Planning for Plant Factories Considering Markets

Integrating Aspects of Supply Chain Design into the Global Sourcing Process Insights from the Automotive Industry

A Design Method for Product Upgradability with Different Customer Demands

Experimental Study on Forced-Air Precooling of Dutch Cucumbers

The Effect of Magnetic Field on Metal Anodizing Behaviour

Development of Colorimetric Analysis for Determination the Concentration of Oil in Produce Water

Measurements of methane leaks from biogas plant based on infrared camera

On the dynamic technician routing and scheduling problem

Models of Tet-On System with Epigenetic Effects

Transcription:

Developing participatory welfare state. Can service users produce some essential local knowledge on public services? Timo Toikko To cite this version: Timo Toikko. Developing participatory welfare state. Can service users produce some essential local knowledge on public services?. 9th International conference of territorial intelligence, ENTI, Strasbourg 2010., Nov 2010, Strasbourg, France. 5p., 2010, ENTI. <halshs-00771132> HAL Id: halshs-00771132 https://halshs.archives-ouvertes.fr/halshs-00771132 Submitted on 8 Jan 2013 HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

DEVELOPING PARTICIPATORY WELFARE STATE. CAN SERVICE USERS PRODUCE SOME ESSENTIAL LOCAL KNOWLEDGE ON PUBLIC SERVICES? Timo Toikko i Principal Lecturer [Adjunct Professor] timo.toikko@seamk.fi, + 358.40.830 4189 Address Seinäjoki University of Applied Sciences Keskuskatu 32 - Fin-63100 Seinäjoki Summary:. Keywords: 1

Developing participatory welfare state. Can service users produce some essential local knowledge on public services? 1. SERVICE USERS PARTICIPATION IN SOCIAL WELFARE SERVICES Finland is a Nordic welfare state where the public sector bears the main responsibility for the provision of social services. The state regulates the basic level of social welfare by law, but it is up to municipalities to decide how they operationalize actual social services in practice. It is thus the municipalities that are responsible for social welfare, as well as for producing the bulk of social services. In this article I am going to ask if the Finnish social welfare is too much centralized on local authorities. The development of social welfare services is concentrated on official organizations and professionals instead of NGOs and service users. Can service users participate in the planning, implementation and evaluation of social welfare services? 2. DIRECTIONS OF DEVELOPMENT The following analysis is meant to help clarify the direction of the development of social welfare services. Cooperation between either official or unofficial actors can be considered to be one direction of development. Development of either the activities or the structure of social welfare can be considered another direction. These dimensions form the four sectors of development 1. The targets of development can be the activities and qualifications of social work professionals themselves, official cooperative structures and systems, cooperation with clients and service users, and cooperation with NGOs and other civic actors. (See Figure 1.) ACTIVITIES UNOFFICIAL ACTORS WITH CLIENTS WITH NGOs AND OTHER CIVIC ACTORS WITH PROFESSIONALS WITH OFFICIAL ORGANISATIONS OFFICIAL ACTORS STRUCTURE Figure 1. Sectors of social welfare development (Toikko 2006; 2007). 1 The development is examined from the viewpoint of official services. 2

The development of social welfare services can be directed at the improvement of the skills and expertise of professionals from the viewpoint of official actors. The National Development Program for Health and Social Services 2, for instance, has strived to attain this aim by funding projects that seek to create good working practices and well-functioning action models, such as the development of action models for early intervention in child protection in cooperation with the day care and school system. This is the type of development that means first and foremost development of the qualifications and skills of professions. The development of social welfare services can also be directed at structural and, primarily, crosssectional activities. The point of departure of the National Development Program for Health and Social Services has been the renovation of the official service structure. The development of the service network has progressed as a collaborative effort between professionals, administrative management and elected officials. However, the discourse has been kept strictly within the framework of the official system. This type of development is therefore primarily directed at the structures of municipal social welfare. Even though the structural development of social welfare services could also rely on civic activities, the Finnish model has not supported this direction of development. Non-governmental organizations have not been in the centre of social welfare development. If this direction was to be emphasized, the question would mainly be of local social political solutions that would involve NGOs and other civic actors in the creation of new service structures. However, it is needed to underline, that the third sector s organizations can get support from other sources than directly from the state. The Slot Machine Association s (RAY) task is to raise funds through gaming operations to support the work of voluntary health and welfare organizations. Each year the RAY s funding enables the organizations to take care of tens of thousands of people from all walks of life. Development of social welfare services can also be directed towards increasing client cooperation, which means that clients themselves participate in the design, implementation and assessment of social welfare. The question is of highlighting the position of service users side by side with the traditional official perspective. The principal outline of the social welfare development has always placed emphasis on the role of the official actors in the field. The participation of non-official actors in development work has been largely ignored. The development of social welfare services has progressed in a very traditional direction. It has followed quite traditional models which emphasize the role of municipal social welfare and professionals in the field. It has not been able to open up alternative development channels. In practice, it is not only the social welfare NGOs that have been ignored but the clients themselves. It certainly is an object of social policy to empower the citizens to participate in political discourse, but at least in regard to social welfare recipients this demand for participation and partnership has succeeded poorly. (Toikko 2006; 2007.) In social welfare development can be seen four different directions. The targets of development can be the qualifications of social work professionals themselves, official cooperative structures, cooperation with NGOs, and cooperation with clients and service users. This paper focuses on the forms of service users participation. 3. SERVICE USERS PARTICIPATION IN DEVELOPMENT Even though client-centeredness is considered one of the central principles of social work, it is not extended to pertain to development work or knowledge production. Service users and their organizations demand to contribute with their own analyses, interpretations and incentives; they want to develop working methods, services and organizations instead of remaining the target of the development work conducted by others (see Turner & Beresford 2005). The participation of the client-citizens in knowledge production is often respectively categorized as three different levels. The first level consists of working methods where the voices of service users are heard 2 The National Development Program for Health and Social Services allow municipalities to both develop good practices in social services and renovate the structure of social welfare. Municipalities can apply for state funding for up to 75 % of the costs of their development projects. This leaves them with the remaining 25 % to finance themselves. 3

and they are consulted. Their opinions and views are called for. The User Participation in Quality Assessment (UPQA) model developed in Denmark is an illustrative example of this (Krogstrup 2004). In the UPQA model, the clients can openly express their views and feelings of the services and their feedback is presented to the workers to comment on. After this, the client feedback is forwarded to both the management of the organization and political decision-makers for further comment. Other tools can include focus groups, discussion groups and various other forums, which give a voice to service users. Another level of knowledge production requires a dialogue between the clients and the professionals. The question is no longer of one-way client feedback, but the clients participate also in its interpretation. The idea is to see the clients as experts who have a role in the development of services. Experts from outside are often consulted in service development; the clients are no less valuable experts of the services they use. Together with professionals, service users conduct clarifications and chart services. They are seen as experts by experience. (Clark, Davis, Fisher, Glynn & Jerreries 2008.) On the third level of knowledge production, it is the service users who control research and development. Service users determine the research question and methods of both data collection and analysis; furthermore, they themselves are responsible for the analysis and the argumentation of the data. Social work professionals and researchers have the role of consultants. User controlled research has its origins in service users dissatisfaction with traditional research, which many feel has disempowered them. (Turner & Beresford 2005; Sweeny 2009.) The emphasis on the viewpoint of service users transforms the conception of expertise in social work. Participatory expertise evolves alongside the specific expertise of subject matter. This, in its part, is considered to guarantee the quality and correct targeting of services, but also to support the service users to achieve full citizenship. The expertise of professionals is thus not absolute expertise of subject matter, but also expertise in the dismantlement of hierarchical structures and interaction on equal terms. 4. TWO APPROACHES TO PARTICIPATION Two key approaches to involving service users can be identified: the consumerist and democratic approaches. Both may have their merits, but they should not be confused. The emergence of consumerist thinking in welfare services has coincided with the expansion of commercial provision. Service users are now conceived of as consumers and issues reframed in terms of market preferences, consumer rights and product development, echoing the language and thinking of the market economy from which they have been borrowed. (Beresford & Croft 1993.) Consumerism starts from the idea of buying the goods and services we want instead of making collective provision for them. It places an emphasis on concepts of individual choice and competition. Two competing meanings underpin the idea of consumerism: first, giving priority to the needs and wants of the consumer ; and the second, framing service users as consumers and converting their needs into markets to be met by the creating of goods and services. The user involvement is then presented as the feedback mechanism for the expression of consumer views. From that point of view clients-consumers choices change service provision. That is the reason it is an essential component of markets. (Tritter & McCallum 2006.) Citizenship is a helpful concept for exploring democratic approach, because it is essentially concerned with people s participation as members of society. In her classical article Arnstein (1969, 216) claims, that citizen participation is a categorical term for citizen power. A client has not citizenship, if he or she has not power over his services. She sees that the participation is a process, where nobodies are trying to become somebodies with enough power to make the target institutions responsive to their views, aspirations and needs. From a democratic point of view it is about more than having a choice and voice, however important that is in social welfare services. It s also concerned with how we are treated and regarded more generally and with having greater say and control over the whole of our approach. Its objectives are civil rights and equality of opportunity. Service users participation emphasizes their empowerment in relation to service organizations. For instance, disabled people campaign for their rights to access buildings and to get public transport. (Beresford & Croft 1993.) 4

CONCLUSION In recent year service users participation has developed at a rapid pace. The question is no longer whether service users should have a voice in local life and services, but how this is to be achieved. It is not just the promise of greater service user involvement that s now needed, but ways of realizing it. It s time to move from rhetoric to reality. Service users involvement can change the culture of social welfare services. Activating clients does not mean they become active only in managing their own lives and living environments, but also in participating in public management and the activities of private organizations. Service users participation has increasingly become a significant part of social welfare services. The core question of Finnish social welfare services concerns the border between the official and the unofficial in the development of social welfare. In what ways do the service users and unofficial organizations participate in the planning, implementation and evaluation of the services? There are a lot of good practical examples of participation, but still there are challenges to get service users involved in social welfare services. References Arnstein, Sherry (1969) A ladder of citizen participation. Journal of the American Institute of Planners 35, 216 224. Beresford, Peter & Croft, Suzy (1993) Citizen involvement. A practical guide for change. London: Macmillan. Clark, Marion; Davis, Ann; Fisher, Adrian; Glynn, Tony & Jefferies, Jean (2008) Transforming services: changing lives. A guide for action. Working for user involvement in mental health services paper 3. Centre of Excellence in Interdisciplinary Mental Health. Birmingham: University of Birmingham. Krogstrup, Hanne (2004) User evaluation in practice. Helsinki: Stakes. Sweeny, Angela (2009) What is survivor research. Teoksessa Angela Sweeny, Peter Beresford, Peter Faulkner, Mary Nettle & Diana Rose (toim.) This is survivor research. Ross-on-Wye: PCCS-Books, 22-37. Toikko, Timo (2006) Asiakkaiden osallistuminen palveluiden kehittämiseen [Service users participation in developing social services]. Työpoliittinen aikakauskirja. 3/2006, 13 22. Toikko, Timo (2007) Developing Finnish social welfare. In Forum Gesundheit und Soziales 3/2007, 93 96, Tritter Jonathan & McCallum, Alison (2006) The snakes and ladders of user involvement: moving beyond Arndstein. Health Policy 76, 156-168. Turner, Michael & Beresford, Peter (2005) User Controlled Research. Its meanings and potential. Final report. Shaping Our Lives and the Centre for Citizen Participation, Burnel University. i Timo Toikko is a Principal Lecturer in social services at Seinäjoki University of Applied Sciences. Furthermore, he is also an Adjunct Professor in social work at the University of Jyväskylä. He is an author of the book on history of Finnish social work [Sosiaalityön ideat. Tampere: Vastapaino, 2005] and a co-author with Teemu Rantanen of the book on methodology for research-oriented development [Tutkimuksellinen kehittämistoiminta. Tampere: Tampere University Press, 2009]. 5