Kaba Padlock Range BEYOND SECURITY
Kaba Padlock systems: > pextra Kaba Padlock Range Kaba offers a range of padlocks to suit a wide variety of applications, providing high levels of physical security combined with marketleading key control procedures. > Roadside and railside cabinets > Vehicle access systems > Containers > Telecommunications cabinets > Inspection hatches and covers > Portable buildings > Vehicle doors > Perimeter gates > Switchgear control
Kaba Padlock Systems Kaba 20 The engineering excellence of the Kaba 20 cylinder is combined with the strong milled Kaba key, which is easy to use as it can enter the cylinder either way. With the controlled issuing of duplicate keys it affords high copy protection direct from the Kaba factory, thus giving our customers total confidence in the integrity of their locking system. quattro plus This high performance patent protected cylinder is suitable for large master key systems. Kaba quattro plus guarantees optimum protection against vandalism with the system being tested to European Norm EN 1303 Grade 6 and attack resistance Grade 2*. quattro plus will withstand manipulation, bumping and drilling. The key can only be reproduced with specialist key milling machines due to its special milled design within the controlled Kaba factory environment. expert Kaba expert is a patented, highly secure reversible key locking system with Kitemark approval. Tested and approved by the BSI and MLA, Kaba expert meets BS EN 1303 requirements for Key Related Security Grade 6 and Grade 2 Attack Resistance*. Duplicate keys may only be produced by authorised Kaba dealers. pextra The Gege security cylinder of pextra incorporates a number of additional features for enhanced security. The patented branch groove cannot be copied with common key milling machines. The optional blocking pin recognizes if an illegally made duplicate key has been inserted into the cylinder. * Only in combination with suitable security furniture
Kaba CEN Padlock Range CEN 6: P8093 P8093 > 80 mm case-hardened steel padlock and shackle > 15 mm diameter closed shackle > Shackle available with 27 mm vertical clearance > EN 12320 Grade 6 (CEN 6) highest grade possible > Cylinder is protected by an 11 mm thick hardened plate > Double locking hardened stainless steel ball bearing > Uses a standard 30 mm euro profile single cylinder > pextra
Kaba CEN Padlock Range CEN 5: P8071 P8071 > 80 mm case-hardened steel padlock and shackle > 15 mm diameter open shackle > Shackle available with 27 & 50 mm vertical clearance > EN 12320 Grade 5 (CEN5) > Uses a standard 30 mm euro profile single cylinder > Cylinder is protected by a 5 mm thick hardened plate > Double locking hardened steel ball bearing > pextra A= 25 or 50 mm
Kaba CEN Padlock Range CEN 5: P8065 P8065 > 80 mm case-hardened steel padlock and shackle > 15 mm diameter open shackle > Shackle available with 27 & 50 mm clearance > EN 12320 Grade 5 (CEN 5) > Uses a Swedish oval cylinder > Cylinder is protected by a 5 mm thick hardened plate > Double locking hardened stainless steel ball bearing A= 25 or 50 mm
Kaba CEN Padlock Range CEN 4: P6062 P6062 > 60 mm case-hardened steel padlock and shackle > 11 mm diameter open shackle > Shackles available with 28 & 50 mm clearance > EN1 2320 Grade 4 (CEN4) > Uses a Swedish oval cylinder > Double locking hardened stainless steel ball bearing > pextra A= 28 or 50 mm
Kaba CEN Padlock Range CEN 3: P4661 P4661 > 46 mm chrome-plated brass padlock > 8 mm diameter open shackle: - Chrome-plated hardened steel shackle version supplied non spring loaded as standard - Stainless steel shackle version supplied spring loaded & self-locking as standard - Spring loaded and self-locking can also be specified as required > Shackles available with 25, 60 & 110 mm clearance > EN 12320 Grade: - 3 (CEN 3) chrome-plated hardened shackle - 2 (CEN 2) stainless steel shackle > Uses a snowman cylinder > Double locking hardened stainless steel ball bearing > pextra Accessories: Padlock retention chain > Helps ensure padlock is not mislaid or lost from installation when unlocked > Length 500 mm. Link diameter 5 mm > Not to be used as part of the security installation > Supplied with built padlocks or as separate item > Available for: P8093, P8071, P8065, P6062, P4661 A= 25 / 60 or 110 mm
Kaba Padlock Range CEN 3: 2010, Light duty: 2001 Kaba 2001 Kaba 2010 > Suitable for light to medium-duty applications > Brass body, chrome-plated for additional corrosion resistance > Available with a hardened steel shackle or optional stainless steel shackle > Available with 5 or 7 mm shackle > Suitable for medium to heavy-duty applications > CEN EN 12320 security standard Grade 3 > Brass body chrome-plated for additional corrosion resistance > Available with a hardened steel shackle or optional stainless steel shackle > CEN EN 12320 standard grades 3 to 6 A= 24/ 40/ 70 or 100 mm A= 30 or 50 mm
Kaba Padlock Range Special: K15* Kaba 15 * > High quality padlock for heavy-duty applications > 10 mm open shackle > Hard steel and body shackle for high security > Interchangeable shackle > LPCB approved, Grade 3 and 4, when used with appropriate security product * Available by special order only, minimum quantity may apply
Kaba Padlock Range Special: K18* Kaba 18 * > Suitable for heavy-duty applications > Hardened steel shackle and cylinder guard > Stainless steel padlock body electropolished > Tungsten carbide anti-drill protection as standard > Attack and resistance-tested to Solid Secure Silver level > CEN EN 12320 security standard Grade 4 * Available by special order only, minimum quantity may apply
Kaba Ltd Lower Moor Way Tiverton Industrial Estate Devon EX16 6SS Tel: 0870 000 5625 Fax: 0870 000 5397 E-mail: info@kaba.co.uk www.kaba.co.uk