Wood Designer Series
The Possibilities are Unlimited! The Wood Designer Series offer a wide array of installation possibilities, limited only by your imagination! Your choice of see-through, corner, and peninsula models makes it easy to customize any installation. Full refractory lining, steel grate, safety fire screen and ash lip create a true masonry fireplace appearance. Corner unit available in left or right opening design. See-through units available in two opening width sizes, 42 and 36. Radiant, clean-faced design allows finishing materials to be brought right up to the opening of the firebox. Powder coat finish has a deep, solid luster, the look of meticulous craftsmanship, and is resistant to abuse. Outside air kit to improve performance, especially in today s tightly constructed homes, available standard in see-through and peninsula models and as an option in corner models. A stunning variety of designer option choices available, including trim kits, glass doors, surrounds, and granite or marble finishing materials are available to make each installation unique. Tested and listed to UL 127 Safety Standards. Heatilator 20-year Buyer Protection Plan. Certifications/General Considerations When selecting a location for your Wood Designer fireplace, it is important to evaluate a number of considerations. A see-through fireplace should be installed between similar-sized rooms. Please consult with your dealer or sales representative to determine the best location for your fireplace. Consult local building codes for local installation and operational guidelines. Rough framing dimensions shown represent the distance from stud to stud only and do not take into consideration the addition of sheetrock/drywall. For best results, do not construct framing until the unit is in place. A hearth extension is required. Venting Specifications Use of Heatilator SL300 Series venting and accessories is required for CL36D, CR36D and ST36D models. Use of Heatilator SL1100 Series venting and accessories required for and ST42A models. Finishing Materials When finishing any model of the Wood Designer Series, combustible material may be brought up to the sides of the fireplace but must never overlap the black area. The black metal may be completely covered with noncombustible material only, such as marble, tile, stone, etc. 800-927-6841 heatilator.com
See-Through Fireplaces PRODUCT & FRAMING DIMENSIONS This information is for planning purposes only. Please refer to installation instructions when installing this product. Product Dimensions ST36D 41½" 47¼" Effective Height 6 5 /8" x 4 3 /4" Outside Air 8" 24" 35" 20 7 /8" 9 5 /8" 20" 36" 40" 7½" 12" 18 3 /4" 8¼" Gas Knockout ST42A 38 " 58 7 /8" Effective Height 4" x 4" Outside Air 11" 28" 23" 11" 23 " " 42" 47" 7 " 14" 19 3 /8" 7 " Gas Knockout You must maintain 2" min. air space clearance from the chimney to the enclosure. Framing Dimensions A B C ST36D 41 42 23 ST42A 48 39 1/ 8 27 Appliance Locations C B A 12" max. Note: Fireplace Header cannot be positioned until after the fireplace assembly is in place. HEARTH EXTENSION C B A A B C D ST36D 36 52 16 64 ST42A 42 66 20 64 12" MIN. TO PERPENDICULAR WALL D 800-927-6841 heatilator.com
Peninsula and Corner Fireplaces PRODUCT & FRAMING DIMENSIONS This information is for planning purposes only. Please refer to installation instructions when installing this product. Product Dimensions GAS 44" 20" 9-1/2" 3" 8 1/4" 42" 22-1/2" 10" 12" 24" 5-3/8" CL36D CR36D 7" 12" ELECTRICAL 36" 1/2" 5-3/4" 40" 4¾" x 6 5 /8" O.A. 17¼" 22½" 9" 42¼" 22½" 38½" effective height 1½" SQ. GAS OPENING 36 5 /8" 5 7 /8" 6¾" 3½" 8½" 34" opening ½" 5¼" 8" 1½" DIA. ELECTRICAL 13¾" Framing Dimensions 2" Minimum Air Space Clearance to Enclosure CL36D CR36D 2" MINIMUM AIR SPACE CLEARANCE TO ENCLOSURE Mantel 12" MA 8 FT. 47 1 /8" Header H
POSSIBILITIES ST36D/ ST42A (shown) CL36D (shown)/ CR36D
MODELS AND OPTIONS Options Configuration Nomenclature Unit Size Model # Viewing Width See-through ST36D 36 See-through ST42A 42 Corner left CL36D 34 Corner right CR36D 34 Peninsula 36 Briarwood Gas Logs Charwood Gas Logs Mistwood Gas Logs Perception Glass Doors Original Bi-Fold Glass Doors Chimney air kit CAK4A, CAK5A 4 insulated flex duct ID4 4 uninsulated flex duct UD4 Outside air kit (corner units only) AK14 Mantels and surrounds See MSRP Book Fireplace perimeter trim TK53B1 Glass Doors and End Panels Original bi-fold glass doors, ST36D ST42A CL36D, CR36D, Perception glass doors, ST36D ST42A CL36D, CR36D Fixed end panel CL36D, CR36D DM1036/B/S DM1242/B/S DM1436/B/S DP1036/B/S DP1242/B/S DP1436/B/S DM1000/B/S DP1000/B/S DPE1436/B/S AVAILABLE FROM a brand of Hearth & Home Technologies Inc. 1915 West Saunders Street Mt. Pleasant, Iowa 52641 800-927-6841 fax 800-259-1549 heatilator.com The information provided in this literature is for planning purposes only. Please consult the installation manual for actual installation. 72960E CG 9/03