ultralift 2 4,400 32,000 Series standard features Heavy-duty construction Precision-designed, custom-molded, high-impact polyethylene tanks All steel parts are above the water* Hot-dipped, zinc-galvanized structural steel frame/fasteners Heavy-duty 0.25" (0.0635 cm) thick torsion bars Heavy-duty structural-grade dock brackets with molded bumper guards Boat-side, padded-step pitmans* 5" (12.7 cm) high-density polyethylene square-hole bushings Two-piece stainless/polyethylene pitman bushings Heavy-duty hull support system Grade-8 pivot hardware All cast parts are (HSLA) High-Strength Low Alloy steel making them 40 percent stronger than fabricated steel Sailboat option recommended for Boats up to 32,000 lbs./14.500 kg Boats up to 50'/15.25m overall length Inboard or stern drive Drive-in or back-in installations Floating docks with U-shaped slips High impact polyethylene tanks ultralift2 series 4400-8800 All steel parts are above the water* ultralift2 series 10,000-32,000 Lifts boats up to 14,500 kg and 15.25m overall length *Standard installation
hydroport 2 xl PWC Docking Platform standard features Ultra-tough polyethylene construction Aesthetically contoured design and bow roller In-line roller wheel design Two docking platforms per 10' (3m) slip Exclusive patented bow bumper Molded-in tie-down loop Anti-skid walk area Universal hull support Capability for floating or fixed docks Rigid mount hardware for floating docks Available in tan and blue Tapered entry with dual bow rollers help center your craft Platforms can convert walk areas, dock ends, and other dead space into revenue centers recommended for One-, two- and three-place PWCs Load capacity up to 1625 lbs./738 kg 12' 6" (3.81 m) length; 4' 10" (1.47 m) width; 15" (38.1 cm) depth Floating or fixed docks Front- or side-mount mooring hardware DRIvE ON TO DOCk ROLL OFF TO LAUNCH Connecting hardware to link multiple frontmounted units together hydroport 2 xl features an exclusive bow bumper to slow your craft s forward motion and provide a soft rest for the keel. Universal mount for floating or fixed docks (shown with optional heavy-duty brackets) Rigid Mount Hardware for Floating docks In-line rollers make launching your craft easy. Multi-link and side mount capabilities
seaport /Landing Air Assist Series The seaport /Landing air-assist series makes docking and launching a breeze. It features a patented air-lift design that lifts your craft completely out of the water. Unlike other available boat lifts, the seaport /Landing Air-Assist Series is completely solar powered eliminating the need for electricity or remote controls. seaport 18 x 11 platform Max. working load 4500 lbs. Platform 5.5m x 3.3m Max. working load 2041kg seaport ultra 24 x 11 platform Max. working load 6000 lbs. Platform 7.3m x 3.3m Max. working load 2722kg Landing 12 x 7 platform Max. working load 2000 lbs. Platform 3.7m x 2.1m Max. working load 907kg Landing ultra 16 x 7.5 platform Max. working load 3000 lbs. Platform 4.9m x 2.3m Max working load 1361kg seaport ultra max 30 x 11 platform Max. working load 7500 lbs. Platform 9m x 3.3m Max. working load 3402kg Landing ultra max 20 x 7.5 platform Max. working load 3500 lbs. Platform 6.1m x 2.3m Max. working load 1588kg All SeaPort /Landing Air Assist Series platforms are available as a front mount or side mount, and are compatible with fixed or floating docks and seawall attachments. boatlift.com 8
marine accessories bow Guide/ corner bumpers The bow Guide will help center the boat in the slip while offering protection to the boat s keel. FRONT BOW GUIDE BACk The corner bumpers offer peace of mind when pulling in to your slip, protecting the boat from contact with the dock. Superior design both in functionality and aesthetics the Corner Bumper has multiple attachment points and will fit on docks with both internal and external roof posts. These dock accessories will give the boater peace of mind, knowing his/her boat will be protected from contact and possible damage from the dock. CORNER BUMPER hydrolocker Innovative Dock Storage hydrolocker is the most attractive dock locker on the market! Vandal-resistant hinges with internal fittings for added security for storing your valuables. Constructed with UV-stabilized polyethylene making it corrosion and impact resistant. It provides a generous 11.5 cubic feet of clean dry storage and can double as a mounting stand for the energymate. control options The hydrolaunch remote control is capable of operating most brands of hydropneumatic style boat lifts which are intended to be controlled with one air valve. The push button control uses automatic valves, eliminating the need for handles and levers. One button to lift, one to lower, and one to stop makes using your boat lift effortless. 800.825.3379 001.918.341.6811
disaster PreParedneSS Protect your investment with optional powersnap weather base. Easy to lift, use and remove. When there is a call for hurricane, flood or winterization preparation, the easy-to-lift head snaps right out for safe storage. hypower Power Pedestal Products The industry leader, hypower is committed to providing revolutionary power products. By design, the patented HyPower products with PowerSnap Technology saves you both time and money. It offers hundreds of panel combinations with the ability to change the panels easily in a matter of seconds. Simple solutions for marinas, RV parks, home and recreation. All HyPower products are UL listed and ADA compliant. FLeXiBiLity and value Our snap-out, snap-in powersnap panels make it even easier and safer to repair your breakers and receptacles. The powersnap panels, receptacles and breakers range from 20 to 50 amperes with 100 amperes available plus offer connection options like cable TV, high-speed Internet and more. The hypower AdvAnTAge powerpedestal.com 915 West Blue Starr Drive n Claremore, OK 74017 800.825.3379 n Fax: 918.341.1178 n sales@powerpedestal.com n support@powerpedestal.com
Ferry 6000 Bi-axial ROTEK provides proven capabilities and maximum capacities PULverizer mcelroy FUSion Ferry 280 PreSSUre decay rotek capabilities Boat lift tanks Traffic barriers Utility boxes Compost containers Air plane seat pockets Liquid storage tanks Heavy-duty pallets Dispensers Underground shelters Aquaculture floats standard features ISO 9001 registered Parts manufactured up to 30' (9.14 m) in length In-house mold maintenance State-of-the-art laboratory and plastic fusion Company 50 years strong Largest bi-axial rotational molding machine in the world Centrally located (U.S. Hub Zone) 3D rapid prototype printer Finite Element Analysis (FEA) rotek advantages Product molded free of stress Metallic insert molding Consistent wall thickness Low tooling cost compared to other processes Design flexibility Small to large hollow products Double wall product capabilities Molded part surface can consist of various textures Parts offer maximum strength and durability Cost savings from steel, wood and fiberglass PaLLetS LiqUid Storage UtiLity BoXeS agriculture airplane PartS marine rotomoldusa.com 24012 Amah Parkway n Claremore, OK 74019 800.825.3379 n Fax: 918.343.1390 n roteksales@rotomoldusa.com Leadership, innovation and continuous improvement with a commitment to quality