P 0.10 0.01 Steel GradeX7Ni9 Chemical information,mechanical properties This page is mainly introduced the X7Ni9 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X7Ni9,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application. Datasheet for Steel Grades Alloy Steel X7Ni9 X7Ni9 Standard Number: ITEM Standard Number Descriptions X7Ni9 Chemical composition(mass fraction)(wt.%) Chemical Min.(%) Max.(%) C Si Mn P S Cr Ni Mo V Ta W N Cu Co Pb B Nb Al Ti Other C Si Mn S Cr Ni 0.10 0.35 0.30-0.8 0 0.015 0.00 5 8.50-10. 0 Mo Al Cu Nb Ti V Ce N Co Pb B Other Cr+Ni+ Mo 0.50% Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 1 / 10
German DIN of low-temperature steel GangHao and chemical composition Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 2 / 10
LenMainly used for the construction of the low temperature LNG tanks, belong to the lowtemperature steel 2 comments approval Ensure that its quench-hardening ability structural steel grades: 20 CrMnTiH standard Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 3 / 10
GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 0.80 ~ 1.15 sulfur S: allow residual content than 0.035 P P: allow residual content than 0.035 chromium Cr: 1.00 ~ 1.35 Ni Ni: allow residual content than 0.030 copper Cu: allow Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 4 / 10
residual content than 0.030 titanium Ti: 0.04 ~ 0.10" mechanical properties: hardness: annealing or high temperature tempering, than 217 HB, diameter of 4.1 mm creasing frequency "heat treatment standards and analysis of metallographic organization:" Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 5 / 10
delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract. Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 6 / 10
th: We can supply any lenth based on the customer's requirement. Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm. Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode. Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 7 / 10
Excellent service for all kinds of industries,with advantages of technologies, equipment and price. We serve you with our honesty, integrity, and professionality. Mechanical properties ViTa llium Mechanical properties,our production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties. Heat treatment ViTa llium Heat treatment,our production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment. Machining ViTa llium Machining,Our production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining. Welding performance ViTa llium Welding performance,our production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance. Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 8 / 10
Related hot word search:vita llium ViTa llium steel plates, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip ELECTRODE ARC FURNACE; (NON)VACUUM INDUCTION FURNACE; LF; VD; VOD; ESR; CONSUMABLE ELECTRODE VACUUM FURNACE. X7Ni9 Physical Properties Tensile strength 115-234 σb/mpa Yield Strength 23 σ 0.2 /MPa Elongation 65 δ5 (%) ψ - ψ (%) Akv - Akv /J HBS 123-321 - HRC 30 - X7Ni9 Mechanical Properties Tensile strength 231-231 σb/mpa Yield Strength 154 σ 0.2 /MPa Elongation 56 δ5 (%) ψ - ψ (%) Akv - Akv /J HBS 235-268 - HRC 30 - X7Ni9 Heat Treatment Regime Annealing Quenching Tempering Normalizing Q & T X7Ni9 Range of products Product type Products Dimension Processes Deliver Status Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 9 / 10
Powered by TCPDF (www.tcpdf.org) Steel GradeX7Ni9 Chemical information,mechanical properties Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID- WASHED, Shot Blasting Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting, Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot- Rolled Annealed, Solution and Aging, Q+T, ACID- WASHED, Shot Blasting Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID- WASHED We can produce Alloy Steel the specifications follows: Note: (1) listed in the table apex diameter (d), to steel thickness (a) multiples said. (2) in the ASTM A6 standard specified scope can meet any additional conditions. (3) from the standard for 50 mm (2 in). Mechanical properties Mechanische Eigenschaften Caracteristiques mecaniques ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale Rm Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc Round bar: Diameter : 1mm-2000mm Square bar: Size: 50mm * 50mm-600mm *600mm Plate steel/flat bar: Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm. Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm Length: We can supply any length based on the customer's requirement. Forging/hot rolling/ extrusion of steel. Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode. Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement. UTS according to SEP 1921 C/c,D/d,E/e;A388 or GB/T 6402 Excellent service for all kinds of industries, with advantages of technologies, equipment and price. We serve you with our honesty, integrity, and professionality. Tel:+86-15386639257 Email:sales@steel-grades.com http://www.steel-grades.com/ Page 10 / 10