DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. PN#0000 / 0.7 / ACC07 B
DIN 0 CLAMPS Overview HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. Our clamps assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. HRL Standard Duty (see pages B to B) Available to tube outside diameter. Recommended for systems with less than 00 PSI operating pressure and no dynamic loads. Bore Styles Standard duty, heavy duty, and twin series are available with either ribbed bores (standard) or smooth bore (special order). When ordering a smooth bore arrangements or clamp pairs, a G is inserted in the code directly after the HR i.e. HRGL, HRGS and HRGZ HRS Heavy Duty (see pages B to B7) Available to nominal pipe size Recommended for systems with greater than 00 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations. Ribbed Bore (standard) Arrangements Various arrangements are available in each series. Smooth Bore smooth surface and chamfered edge prevent chaffing of hose (special) HRZ Twin (see pages B to B9) Available to / nominal pipe size Recommended for systems with less than 00 PSI operating pressure and no dynamic loads HREL Standard Duty w/ Rubber Insert (see pages B0 to B) Available to tube outside diameter Recommended for systems with less than 00 PSI operating pressure and no dynamic loads Provide for greater noise reduction and resistance to axial movement Weld Plate Crail Stacking Mounting Mounting Modules & Kits HRES Heavy Duty w/ Rubber Insert (see pages B to B) Heavy duty available to / bore diameter Provide for greater noise reduction and resistance to axial movement Materials Metal components are carbon steel (standard). Stainless steel is also available. Metal components to be welded (weld plates and crails) and heavy duty top plates size are phosphate coated, while all other metal components are zinc plated. Clamp pairs are polypropylene (standard). Polyamide and aluminum clamp pairs are also available. For specifications on these materials, see page B. Ordering Clamps can be ordered as complete arrangements, or separate components. See each series for details. B PN#0000 / 0.7 / ACC07
Technical Specifications Mounting Guidelines The first clamp should be mounted directly after the threaded connection or coupling. This protects the connection from vibrations. Bends in the line should be clamped on BOTH sides of the bend. The line should be clamped directly before and after any inline valves. Proper torquing of the clamp bolts is important, and is part of the DIN 0 Standard (see the chart below right for torque information) L DIN 0 CLAMPS Distance Between Clamps Pipe Distance (L) Tube Distance (L) / / / / / / / / 7 / / / 0 / / 0 7/ / 7 / 7 / 7 7 Bolt Tightening Torque Specifications Thread PP PA AL HRL (Std. Duty) 0 to /0 0 HRS (Heavy Duty) HRZ (Twin) & / 0 0 / 7/ 0 0 / 0 /0 0 0 0 7 7/9 0 00 0 M0 0 0 00 9 M0 00 70 00 0 M0 70 70 00 /0 to / / Note: Torque is given in Nm (Nm x 0.77 = Ftlbs) Properties of Materials (clamp pairs) Properties Polypropylene PP Polyamide PA Aluminum AL Mechanical Properties Tensile Strength 00 psi 70000 psi Flexural Yield Strength 700 psi 000 psi Impact Strength (Izod Method) No Failure No Failure Tensile Test 000 psi Brinell Hardness No. 0 BHN Modules of Elasticity 9.7 x 0. x 0 psi Thermal Properties Continuous Service Temperature Range Electrical Properties Volume Resistivity Chemical Properties Chemical Resistance to 9 F 0 to 90 C 0 to F 0 to 0 C 7 to 00 F to 0 C 0 Ohmcm 0 Ohmcm Resistant to most aqueous solutions of inorganic salts, minerals, and organic acids, even at high temperatures. Resistant to organic solvents, dilute acids, and bases. Resistant to radiation. Resistant to neutral and sea water, organic acids, esters, oils, and inorganic salt solutions. PN#0000 / 0.7 / ACC07 B
DIN 0 CLAMPS HRL Standard Duty Clamps D 7 A with Weld Plate A without Weld Plate ATM for CRail Mounting (order CRail separately) (size to only) D Stacking Module (size 0 to only) A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRL = Standard duty single clamp with ribbed bore HRGL = Standard duty single clamp with smooth bore Family 0 to (refer to table A on next page) Arrangement A = Single clamp with top plate and weld plate A = Single clamp without weld plate ATM = CRail mounted clamp D = Single clamp stacking module (size 0 only) Bore (refer to table A on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRL A.7 PP UNC B PN#0000 / 0.7 / ACC07
Dimensions 0 s CRail Nut CRail DIN 0 CLAMPS. () A.9 (0).7 (9.). () A A /" 0 UNC 9 (0). () H ø D H ø D H.9 (.) Plastic Cap H.0 (). (). () A. (0). () A. (0).0 () ø.9 (ø 0).9 ().0 (). Table A 0 7 Recommended Weight ød Bore Nominal Bolt A A A H H Arrangement Arrangement Tube O.D. Pipe A A 0. () 0. (.) / 0. (.0) / 0.7 (9.) / 0.9 (0) / 0.7 () 0. () 0. (.) / 0. (.0) / 0.7 (9.) / 0.9 (0) / 0.7 () 0.0 (.7) / 0. (.7) / 0. () 0.9 () 0. () / 0.7 (7.) / 0.7 () 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 0.9 () 0.9 ().0 (.).0 (.) /.0 (). (0). () /. (.7). ().0 () /.7 (0). () /.7 (.) /.9 (.) /.0 (0.).7 (0.). (.) /.7 (7) / (7.). (.9) PN#0000 / 0.7 / ACC07 N/A. (0).0 () 0. (). () 0.79 (0). (). () 0.) (). ().0 (). ().7 (0) 0.77 (9.). (9).0 ().97 (0).9 () 0. (.).9 ().7 (0). (9). (7) 0.9 ().9 ().0 (). (7).7 (70). (). ().0 (). (). (). (). (7).7 (9). (). ().97 (0).9 (00).7 (0). ().7 (.9). (). () Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. /0 x / (M x 0) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x 70) /0 x (M x 00) /0 x (M x ) 0. (0.0) 0. (0.0) 0.7 (0.) 0. (0.) 0. (0.) 0. (0.9) 0. (0.) 0. (0.7) 0. (0.0) 0. (0.0) 0. (0.07) 0. (0.0) 0.7 (0.) 0. (0.) 0.0 (0.) 0. (0.).0 (0.) 0.7 (0.) B
DIN 0 CLAMPS HRS Heavy Duty Clamps A S with Weld Plate S without Weld Plate STM for CRail Mounting (size to only) (order CRail separately) A Stacking Module (size to 7 only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRS = Heavy duty single clamp with ribbed bore HRGS = Heavy duty single clamp with smooth bore Family to 0 (refer to table B on next page) Arrangement S = Single clamp with top plate & weld plate S = Single clamp without weld plate STM = CRail mounted clamp (sizes only) A = Single clamp stacking module (sizes 7 only) Bore (in mm) (refer to table B on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = Stainless Steel Thread Type UNC = Standard M = Metric (sizes, 9 and 0 available in Metric only) HRS S.7 PP UNC B PN#0000 / 0.7 / ACC07
Dimensions DIN 0 CLAMPS All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A S ø.7 (ø ) /" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ø D H.79 (0). (.). ().9 (). (.) S. ().7 (). (7). (.) Table B A A PN#0000 / 0.7 / ACC07 B Recommended Weight Nominal Arrangement Tube O.D. Pipe A A A B H H S Bolt S S / / / / / /.0 ().7 (7).7 (). (0) 0.9 ().9 () 0. () / x / (M0 x ) 0. (0.) 0. (0.) / / ød Bore 0. (.0) 0. (.) 0. (.0) 0.7 (9.) 0.9 (0) 0. (0.) 0. (.7) 0. (.7) 0. () 0.9 () 0. () 0.7 (7.) 0.7 () 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 7/ 0.9 ().77..7... 0..0 (.) () () (70) (0) () () ().0 (.7) /. (). (0) 0.9 (). (0). () /. (.7)..9...0.99 0.. () (0) (00) () (0) () (7) (). () /.7 (0). () /. (0). () /. () /.7 (.) /.9 (.) /.0 (0.). (). (90.). (0). ().77 ().7 (). (0) 0.9 (0). (7) /.7 (0.). (.) /. ().7 (70) /. () /. ().7 (70).7 (7) /.0 () 7.09 (0).9 (). (0).7 (70). (0) 0.9 (0).0 (7.). (.9). ().7 (9).0 (0.) /. (0) /. (). ().07 (0). (0).9 (00) 7.7 (00) 0.9 (). (.) /. (90) 7. (). (9.7).07 (0) 0. (70) 9.9 (). (90). () 9.0 (0) 0.9 (). () 7. (9.7). (9.) 7/ 7 0. ().9 (0).0 (0).7 (0).0 (0).0 (0) 0.9 () 9 0.7 (7.0).7 (.9) 0. (9) 0.7 (0). ().0 (0) 9. ().0 (70). (0) 0 (.) (0.) 0.7 (0 ).77 (0).0 (0) 7.09 (0). (90). (0). (0) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. ø.9 (ø ) ø.9 (ø ) /x/ (M0 x 0) / x / (M0 x 70) 7/ x (M x 00) / x / (M x 0) /0x7/ (M0 x 90) 7/9x/ (M x 0) M0 x 00 M0 x 0 M0 x 0.7 (0) 0.7 (0.) 0. (0.) 0.97 (0.) 0. (0.). (.7). (0.).7 (.99).0 (.). (.0).7 (.07).9 (7.) 9. (.).7 (.).9 (.) 9.9 (7.99).0 () 7. (7.0) 7.0 (0.). (9.) B7
DIN 0 CLAMPS HRZ Twin Clamps D A Twin Clamp with Weld Plate A Twin Clamp without Weld Plate ATM Twin Clamp for CRail Mounting (order CRail separately) (size to only) D Twin Clamp Stacking Module A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRZ = Standard duty twin clamp with ribbed bore HRGZ = Standard duty twin clamp with smooth bore Family to (refer to table C on next page) Arrangement A = Twin clamp with weld plate A = Twin clamp without weld plate ATM = CRail mounted twin clamp D = Twin clamp stacking module Bore (in mm) (refer to table C on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRZ A 9. 9. PP UNC B PN#0000 / 0.7 / ACC07
Dimensions HRZ All s DIN 0 CLAMPS CRail Nut /" 0 UNC H H ø ø dd ø ø dd.0 () H A A A. (0). (). ().0 ().9 () 9 (0).9 (.) Plastic Cap CRail ø.9 (ø 0).0 () Table C ød Bore Recommended Nominal A A A H H H Bolt Tube O.D. Pipe 0. () 0. (.) / 0. () / 0.7 (9.) / 0.9 (0) / 0. (0.) / 0.7 () 0.0 (.7) / 0. (.7) / 0. () 0.9 () 0. () / 0.7 (7.) / 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 7/ 0.9 () 0.9 ().0 (.).0 (.7) /. (). (0). () /. (.7). (). () /.7 (0). () / 0.79 (0). (9). ().77 ().0 (). (7).7 ().7 (70). (). (0). ().09 (). (7). ().7 (0) 0.7 (.) 0.7 () 0.9 (.) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print..0 (). ().0 (7).0 (). (7). (). ().9 ().7 (.). (.). (9.). (7.).0 () /0 x / (M x ) / x / (M x ) / x / (M x ) / x (M x 0) / x / (M x 0) PN#0000 / 0.7 / ACC07 B9
DIN 0 CLAMPS HREL Standard Duty Clamps with Rubber Inserts 7 A with Weld Plate A without Weld Plate ATM for CRail Mounting (order CRail separately) (size to only) D Stacking Module A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Rubber Insert Model Code Family, (refer to table D on next page) Arrangement A = Single clamp with top plate and weld plate A = Single clamp stacking kit ATM = CRail mounted clamp D = Single clamp stacking module Bore (in mm) (refer to table D on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Components Materials (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HREL A.7 PP UNC B0 PN#0000 / 0.7 / ACC07
Dimensions All s CRail Nut CRail DIN 0 CLAMPS A A S /" 0 UNC 9 (0). () ød.9 (.) ød ød H Plastic Cap.0 (). () H.0 ().9 ().0 () A. (0) S ø.9 (ø 0). Table D EERubber Insert Recommended Nominal Clamp Bore Tube Hose O.D. ød O.D. Pipe Min. Max. 0. () 0. 0. 0. () / 0.0 0. 0.9 (0) / 0.7 0.9 0.7 () 0. 0.7 / L 0.0 (.7) / 0. 0.0 0. () 0. 0. 0.9 () 0.7 0.9 0. () / 0. 0. 0. (7.) / 0. 0. 0.7 (9) / 0.7 0.7 0.79 (0) / 0.77 0.79 0.7 () 7/ 0. 0.7 0.9 () 0.9 0.9 / L.0 (7) /.0.0.0 ().0.0. (0)... () /.. ød ød H H A A A S Bolt.00 (.). (9). (). () 0.9 (.).0 (.) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.. (7).0 (7).7 (0).0 (). (9). (). (7).9 () 0. () 0. () /0 x / (M x ) /0x / (M x 70) Parts KP = Clamp Pair EE = Rubber Insert (Santoprene TPE 7) HREL KP PP HRES / L EE * KP, (refer to table above) Clamp Pair EE / L, / L (refer to table above) Rubber Insert Clamp Material PP = Polypropylene PA = Polyamide Bore (in mm) (refer to table above) *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B
DIN 0 CLAMPS HRES Heavy Duty Clamps with Rubber Inserts 7 S with Weld Plate S without Weld Plate STM for CRail Mounting (size to only) (order CRail separately) A Stacking Module (size to only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Rubber Insert Model Code Family to 7 (refer to table E on next page) Arrangement S = Single clamp with weld plate S = Single clamp stacking kit STM = CRail mounted clamp A = Single clamp stacking module Bore (in mm) (refer to table E on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Component Material (omit) = Carbon Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRES S PP UNC B PN#0000 / 0.7 / ACC07
Dimensions DIN 0 CLAMPS All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A A ød S ø.7 (ø ) /" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ød ød H.79 (0). (.). ().9 (). (.). (7). ().7 (). (.) Table E Clamp / L / L 7 7 A EERubber Insert Recommended Nominal Bore ød Tube Pipe Hose O.D. O.D. in Min. Max. 0. () 0. () 0.9 (0) 0.7 () 0.0 (.7) 0. () 0.9 () 0. () 0. (7.) 0.7 (9) 0.79 (0) 0.7 () 0.9 ().0 (.9).0 (). (0). (). (.7). ().0 (). (0). ().79 (.).9 ().0 ().0 (.). (.). (0). ().7 (70).7 (7).99 (7).7 ().0 (9).70 (9).9 (0). (0).9 (). () B / / / / 7/ / / / S / / / / / / / 0. 0.0 0.7 0. 0. 0. 0.7 0. 0. 0.7 0.77 0. 0.9.0.0........77.7.99.0.0...7..97.9...90.7.. 0. 0. 0.9 0.7 0.0 0. 0.9 0. 0. 0.7 0.79 0.7 0.9.0.0.....0...79.9.0.0....7.7.99.7.0.70.9..9. ød ød B H H A A A S Bolt.00 (.). (9). ().0 (9).7 ().0 (). (). ().9 (7). (9).0 (). (). (0). (0).77 (). (0). (0). (90) 0.9 (.).0 (.). (.).70 (.). (9.).7 (.). (7).0 (7). (07).9 (7) 7.7 (97).9 (7) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. ø.9 (ø ) ø.9 (ø ).7 (0).0 (). (90.).0 (). ().07 (0). (9). (). (0) 7.09 (0). () 0. (70). (7).9 (). ().9 ().07 (0) 9.9 ().7 (0) 0. () 0. () 0.9 (0) 0.9 (0) 0.9 () 0.9 ().0 () / x / (M0 x 0) / x / (M x 70) 7/x (M x 00) /x / (M x 0) /0x7 / (M0 x 90) 7/9x / (M0 x 0) Model Code KP = Clamp Pair KP to 7 (refer to table above) Clamp Pair Clamp Material PP = Polypropylene PA = Polyamide HRES KP PP EE = Rubber Insert (Santoprene TPE 7 sizes ) (Buna NBR 70 sizes 7) HRES / L EE.9 EE / L to 7 (refer to table above) Rubber Insert Bore (in mm) (refer to table above) Note: All other components for these clamps are the same as for HRS series heavy duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B
DIN 0 CLAMPS HRL, HRS, & HRZ Parts Hex Head Bolts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Bolt Model Code Model Code 0 / 0 x. SCREW H /0 X. GR SCREW H /0 X. SS / 0 x. SCREW H /0 X. GR SCREW H /0 X. SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS HRL / 0 x.7 SCREW H /0 X.7 GR SCREW H /0 X.7 SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS / 0 x.7 SCREW H /0 X.7 GR SCREW H /0 X.7 SS 7 / 0 x.00 SCREW H /0 X.00 GR / 0 x.00 SCREW H /0 X.00 GR Only available in METRIC see below / x.7 SCREW H / X.7 GR SCREW H / X.7 SS / x. SCREW H / X. GR SCREW H / X. SS / x.7 SCREW H / X.7 GR SCREW H / X.7 SS 7/ x.00 SCREW H 7/ X.00 GR SCREW H 7/ X.00 SS HRS / x. SCREW H / X. GR SCREW H / X. SS / 0 x 7.0 SCREW H /0 X 7.0 GR SCREW H /0 X 7.0 SS 7 7/ 9 x.0 SCREW H 7/9 X.0 GR SCREW H 7/9 X.0 SS HRZ 9 0 Only available in METRIC See below / 0 x. SCREW H /0 X.7 GR SCREW H /0 X. SS / x. SCREW H / X.7 GR SCREW H / X. SS / x.7 SCREW H / X.7 GR SCREW H / X.7 SS / x.00 SCREW H / X.00 GR SCREW H / X.00 SS / x.0 SCREW H / X.0 GR SCREW H / X.0 SS (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Bolt Model Code Model Code 0 M x 0 SCREW H M x 0. SCREW H M x 0 A M x 0 SCREW H M x 0. SCREW H M x 0 A M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A HRL HRS HRZ M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A M x 70 SCREW H M x 70. SCREW H M x 70 A 7 M x 00 SCREW H M x 00. SCREW H M x 00 A M x SCREW H M x. SCREW H M x A M0 x SCREW H M0 x. SCREW H M0 x A M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A M0 x 70 SCREW H M0 x 70. SCREW H M0 x 70 A M x 00 SCREW H M x 00. SCREW H M x 00 A M x 0 SCREW H M x 0. SCREW H M x 0 A M0 x 90 SCREW H M x 90. SCREW H M x 90 A 7 M x 0 SCREW H M x 0. SCREW H M x 0 A M0 x 00 SCREW H M0 x 00. SCREW H M0 x 00 A 9 M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A 0 M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A M x SCREW H M x. SCREW H M x A M x SCREW H M x. SCREW H M x A M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A M x 0 SCREW H M x 0. SCREW H M x 0 A B PN#0000 / 0.7 / ACC07
DIN 0 CLAMPS Top Plates Model Code HRL, HRS, HRZ Clamp HRL DP ST ZN Top Plate Material ST = Carbon Steel A = 0 Stainless Steel (Not available for HRS series) A = Stainless Steel Material Finish (omit) A and A Stainless Steel ZN = Zinc Plated ZN Ni = Zinc Nickel Plated (Standard for HRL and HRZ) Weld Plates Model Code HRL, HRS, HRZ Clamp HRL AP ST UNC BL Weld Plate Material ST = Carbon Steel A = 0 Stainless Steel (Not available for HRS series) A = Stainless Steel Thread Type UNC = Standard M = Metric Material Finish (omit) A and A Stainless Steel BL = Phosphate Coated (Standard) ZN = Zinc Plated ZN Ni = Zinc Nickel Plated PN#0000 / 0.7 / ACC07 B
DIN 0 CLAMPS HRL, HRS, & HRZ (cont d) Parts Safety Plates Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code HRL 0 HRL 0 SIP ST ZN HRL 0 SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A 7 HRS 7 SIP ST ZN HRS 7 SIP A HRZ HRZ SIP ST ZN HRZ SIP A HRZ / SIP ST ZN HRZ / SIP A Stacking Bolts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 & HRL/Z 0+ AF ST UNC ZN HRL/Z 0+ AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL HRS HRZ HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC 7 HRS 7 AF ST UNC ZN HRS 7 AF A UNC HRL/Z 0+ AF ST UNC ZN HRL/Z 0+ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 & HRL/Z 0+ AF ST M ZN HRL/Z 0+ AF A M HRL AF ST M ZN HRL AF A UNC HRL HRS HRZ HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRS AF0 ST M ZN HRS AF0 A M HRS AF0 ST M ZN HRS AF0 A M HRS AF0 ST M ZN HRS AF0 A M HRS AF ST M ZN HRS AF A M HRS AF ST M ZN HRS AF A M HRS AF ST M ZN HRS AF A M 7 HRS 7 AF ST M ZN HRS 7 AF A M HRL/Z 0+ AF ST M ZN HRL/Z 0+ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M B PN#0000 / 0.7 / ACC07
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Clamp Pair Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRL KP d PP HRZ = Standard Duty Twin (Ribbed Profile) HRGZ = Standard Duty Twin (Smooth Profile) Clamp Clamp Pair Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRZ KP dd PP HREL & HRES Clamps with Rubber Inserts KP HRES /L KP PP HREL, HRES Clamp Pair Material PP = Polypropylene PA = Polyamide EE HRES / L EE d * HREL, HRES Rubber Insert Bore Diameter (mm) Material TPE 7 = Santoprene TPE 7 NBR = Nitrile (Buna) TPE7 *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B7
DIN 0 CLAMPS HRL, HRS, & HRZ Parts CRail Nuts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 HRL 7 HRL 0 TM/ UNC ST ZN HRL 0 TM / UNC A HRS HRS TM/ UNC ST ZN HRS TM/ UNC A HRS TM7/ UNC ST ZN HRS TM7/ UNC A HRL 0 TM/ UNC ST ZN HRL 0 TM/ UNC A HRZ HRZ TM/ UNC ST ZN HRZ TM/ UNC A (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 HRL 7 HRL 0 TM M ST ZN HRL 0 TM M A HRS HRS TM0 M ST ZN HRS TM0 M A HRS TM M ST ZN HRS TM M A HRL 0 TM M ST ZN HRL 0 TM M A HRZ HRZ TM M ST ZN HRZ TM M A CRail B Carbon Steel,Phosphate Coated Stainless Steel Model Code Model Code HRL M HRL TS X ST BL M HRL TS X A M M HRL TS X ST BL M HRL TS X A M HRS M HRS TS 0X ST BL M HRS TS 0X A M M HRS TS 0X ST BL M HRS TS 0X A M HRZ M HRL TS X ST BL M HRL TS X A M M HRL TS X ST BL M HRL TS X A M PN#0000 / 0.7 / ACC07
HRL & HRS with Stainless Steel Metal Components HRL Standard Duty Description HRS Heavy Duty Clamps with stainless steel metal components are available for corrosive environments. Our complete line of DIN 0 clamps are available in stainless steel. Some models are special order, which may require minimum quantities, and/or extended delivery times. Listed here are the standard duty and heavy duty single clamps with weld plate. 0 Stainless Steel: (A) Available from stock UNC bolts Stainless Steel: (A) Salt water resistance HRL sizes in UNC available from stock HRS sizes in UNC Larger sizes in metric only Typical Arrangement with Weld Plate (HRL...A...) for Standard Duty (HRS...S...) for Heavy Duty Hex Head Bolts (SCREW H) Top Plate (DP) Clamp Pair (KP) Weld Plate (AP) CRail Nuts (TM) DIN 0 CLAMPS Stainless Steel UNC Stocked Program Light Duty (HRL) Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws Screw H /0 x. SS Screw H /0 x.0 SS Screw H /0 x.0 SS Screw H /0 x.7 SS Screw H /0 x.0 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes. 007 00099 000 00 00 000 0009 000 00 00 07007 070090 070090 07007 0700 Heavy Duty (HRS) Model Code Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC Weld Plates HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC Top Plates HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Ext Hex Screws Screw H /x.7 SS Screw H /x. SS Screw H /x.7 SS Screw H /x.00 SS Screw H /x. SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page B7 for available bore sizes. 007 00099 000 00 00 000 0009 000 00 000 0707 070 0707 0707 0700 CRail (TS) PN#0000 / 0.7 / ACC07 B9
DIN 0 CLAMPS HRL Standard Duty 0 stainless steel (A) metal components Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes. Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws ( Stainless Steel) SCREW H /0 x. SS SCREW H /0 x.0 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS 0707 0707 07077 0707 07079 0700 070 070 070 070 0707 070 07007 070090 070090 07007 0700 0700 HRL CRail HRL TS x A M 009 HRL CRail Nuts HRL 0 TM / UNC A 0070 stainless steel (A) metal components (metric) Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M Weld Plates (metric thread) HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Hex Head Bolts SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX70 A XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes. 000 0009 000 00 00 00 000 0009 000 00 00 00 00009 000 000 0000 000 000 HRS Heavy Duty stainless steel (A) metal components (metric) Model Code Part Number Arrangements (complete with PP clamp pair) XX = bore diameter HRS S XX PP A M A unique part number exists HRS S XX PP A M for each individual clamp bore HRS S XX PP A M diameter. A complete model HRS S XX PP A M code is sufficient for ordering. HRS S XX PP A M Use the dimensions table for HRS S XX PP A M standard HRS clamps on page B7 for available bore sizes. Weld Plates (metric thread) HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M Top Plates 00 007 00 00790 00700 0070 HRS DP A 000 HRS DP A 0009 HRS DP A 0000 HRS DP A 000 HRS DP A 000 HRS DP A 000 Hex Head Bolts (metric) SCREW H M0X A SCREW H M0X0 A SCREW H M0X70 A SCREW H MX00 A SCREW H MX0 A SCREW H M0X90 A 000 000 000 0007 0000 000 HRS CRail HRS TS 0X A M 009 HRS CRail Nuts HRS TM 0 A M HRS TM A M 007 0079 B0 PN#0000 / 0.7 / ACC07