A.1 Contents file 4 to 5 A.1 (1)

Similar documents
GMP MANUAL Contents. Contents (1) 1 Pharmaceutical Quality System (PQS) 2 Personnel

GMP MANUAL Contents. 1 Pharmaceutical Quality System (PQS)

GMP GUIDELINES. GMP Guides from Industry Organisations. FDA cgmp WHO GMP. cgmp Guide Drugs 21 CFR 210 GAMP. ISPE Technical Guides

INTERNATIONAL CONFERENCE ON HARMONISATION OF TECHNICAL REQUIREMENTS FOR REGISTRATION OF PHARMACEUTICALS FOR HUMAN USE GUIDELINES INDEX

Good manufacturing practices

EU and FDA GMP Regulations: Overview and Comparison

Regulatory considerations for Global Haplobank

ADVANCES IN PHARMACEUTICAL INDUSTRY FOR WELLNESS AND SUSTAINABLE HEALTH

Question-based Review (QbR)

Impact of EU GMPs on Australian GMP. Trevor Schoerie PharmOut

Regulatory expectations on impurities in drug substances - Pavia, October 2, Luisa Torchio Euticals SpA

Challenges of the regulatory body in implementing the legislations for the radiopharmaceuticals: efforts of IAEA

PHARMA KNOWLEDGE PARK

European Medicines Agency Inspections

Drug Quality Assurance: Systems at ChemCon Author: Dr. Peter Gockel

Production of radiopharmaceuticals for clinical and research uses

Overview of Impurities

Library Guide: Active Pharmaceutical

Guideline on the Requirements for Quality Documentation Concerning Biological Investigational Medicinal Products in Clinical Trials

European Medicines Agency Evaluation of Medicines for Human Use

Setting Specifications for Biotech Products

Harmonized Quality Requirements for Biotech Investigational Medicinal Products - A Regulator's View

Examples of regulatory expectations for analytical characterization and testing

EU Annex 11 US FDA 211, 820, 11; other guidelines Orlando López 11-MAY-2011

USP Chapter 823 USP 32 (old) vs. USP 35 (new)

Phase Appropriate GMPs for IMPs. Presented by: Karen S. Ginsbury For: IFF, October 31, Nov 02, 2017

EU Annex 11 US FDA , (g), (i), 11 Orlando López 09-APR

Extractables and leachables: An Introduction

Cell History File Explanatory Introduction

Q&A on ICH Q7 Good Manufacturing Practice Questions and Answers Document

Validation Needs for Sterilization by Aseptic Filtration

INSPECTION OF BIOTECHNOLOGY MANUFACTURES

EUROPEAN COMMISSION HEALTH AND CONSUMERS DIRECTORATE-GENERAL. This document is for consultation until 11 December 2015

INTRODUCTION TO THE QUALITY SYSTEMS APPROACH TO CGMP COMPLIANCE

Good practices in quality control in pharmaceutical industry - Overview of regulatory guidelines

Guidance for Industry ANDAs: Stability Testing of Drug Substances and Products

Journal of Chemical and Pharmaceutical Research

ISPE Baseline Pharmaceutical Engineering Guide for New and Renovated Facilities Volume 2: Oral Solid Dosage Forms (Revision) Executive Summary

Current Global GMP Status and Trends With Focus on EU & PIC/S JPMA Annual Meeting, Tokyo & Osaka, September 2012 Dr.-Ing.

Japanese Pharmacopoeia s Challenge to the Globalization

ICH 교육가이드라인 [ 안전성 & 품질 ]

COMMITTEE FOR VETERINARY MEDICINAL PRODUCTS NOTE FOR GUIDANCE: MANUFACTURE OF THE FINISHED DOSAGE FORM

Testo Expert Knowledge. The GxP Dictionary 1st edition. Definitions relating to GxP and Quality Assurance

European Union (EU) Regulatory Trends in GMP. Clive Brading Tianjin, China September 23, 2009

API Stability Protocols and. Chris Byrne Tasmanian Alkaloids

PHARMACEUTICAL INSPECTION CONVENTION PHARMACEUTICAL INSPECTION CO-OPERATION SCHEME. PI July 2018

On the Q&A to the Guideline for Common Technical Documents

Pharmaceutical Reference Standards: Overview and Role in Global Harmonization

Review article Rapports De Pharmacie 2015;1(2):46-53 ISSN:

COMMITTEE FOR PROPRIETARY MEDICINAL PRODUCTS (CPMP) NOTE FOR GUIDANCE ON SUMMARY OF REQUIREMENTS FOR ACTIVE SUBSTANCES IN PART II OF THE DOSSIER

FDA S GUIDANCE FOR INDUSTRY ANDAS: STABILITY TESTING OF DRUG SUBSTANCES AND PRODUCTS

ICH guideline Q11 on development and manufacture of drug substances (chemical entities and biotechnological/biological entities)

EUROPEAN INDUSTRIAL PHARMACISTS GROUP. Guidance on CPD for QUALIFIED PERSONS

Subpart B Organization and Personnel, 21 CFR Responsibilities of the quality control unit.

GCP Basics - refresher

A Generic Industry Perspective on Establishing Impurity Limits And a Corresponding Control Strategy

AUSTRALIAN CODE OF GOOD MANUFACTURING PRACTICE FOR MEDICINAL PRODUCTS

ICH Q11 Development & manufacture of drug substances

International Harmonisation of pharmacopoeial monographs

Overview of Regulatory Requirements for API and Formulations

CMC Strategy Forum, Paris 2008

The European Pharmacopoeia & International Harmonisation

Contents. Contents (13) 1 Production (23)

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY. EudraLex. Volume 4

Good Manufacturing Practices Purpose and Principles of GMP. Tony Gould

Orange and Yellow Guides

Workshop on Skip Testing

Proposed Revision of USP General Chapter Radiopharmaceuticals for Positron Emission Tomography Compounding <823>

Guideline on the requirements for quality documentation concerning biological investigational medicinal products in clinical trials

How to Avoid Common Deficiencies in INDs and NDAs. Ramesh Raghavachari, Ph.D. Branch Chief, Branch IX ONDQA/OPS/CDER

DECEMBER 2008 GUIDANCE NOTES ON PRODUCT QUALITY REVIEW

GMP considerations when designing an API plant. Presented by Cameron Roberts, Senior Engineer 4 July, 2016

Regulatory Aspects of Cleaning and Cleaning Validation. Larry Greenstein Quality Operations, Quality Unit, Bio-Technology General, Ltd.

Regulations of Biologics in Taiwan

Guideline for the quality, safety and efficacy of follow-on biological medicinal products

PROCESS VALIDATION ROCHAPON WACHAROTAYANKUN, PH.D.

ICH Topic M 4 Q Location issues for Common Technical Document for the Registration of Pharmaceuticals for Human Use Quality Questions and Answers

Wirkstoffdokumentation & CEP- Verfahren

Guideline on the requirements for quality documentation concerning biological investigational medicinal products in clinical trials

GUIDANCE ON VARIATIONS TO A PREQUALIFIED DOSSIER

A GUIDELINE ON DOSSIER REQUIREMENTS FOR TYPE I VARIATIONS November 1999

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL. EudraLex The Rules Governing Medicinal Products in the European Union

Guideline on the requirements for quality documentation concerning biological investigational medicinal products in clinical trials

Status of the ICH Q11 Guideline on Development and Manufacture of the Active Substance. Riccardo Luigetti Prague, 9 December 2009

ICH Q8/Q8(R)

MANUFACTURE OF INVESTIGATIONAL MEDICINAL PRODUCTS

Method Validation Studies How GLP Interacts With Guidance Documents

Working Party on Control of Medicines and Inspections. Final Version of Annex 16 to the EU Guide to Good Manufacturing Practice

References Concept. Principle. EU Annex 11 US FDA , (g), (i), 11 Orlando Lopez 2/15/11. Old Annex 11.

ICH Q3D Guideline Impact on the Users: Perspective of a Finished Product Manufacturer John Glennon

Update to the Manufacturing Principles for Medicinal Products

Guidance for Industry Q3B(R2) Impurities in New Drug Products

PROPOSAL FOR REVISION OF THE SUPPLEMENTARY GUIDELINES ON GOOD MANUFACTURING PRACTICES: VALIDATION, APPENDIX 7:NON-STERILE PROCESS VALIDATION

Hosting Inspections from foreign countries: PMDA (Japan) ANVISA (Brazil)

Comments from: 1. General comments. International Plasma Fractionation Association (IPFA) Our ref. IP

Internationally harmonised requirements for batch certification

Inspection Trends. American Society for Quality Richmond, VA Section March 8, 2016

CGMP Requirements for Investigational Products

Transcription:

Contents file 4 to 5 Contents file 4 to 5 A Information Contents file 4 to 5 A.2 Index file 4 to 5 A.3 List of Abbreviations A.4 Glossary A.5 Adress-Register A.6 References B Japanese Regulations B.1 MHW Ministerial Ordinance No. 2,1961: Regulations for Buildings and Facilities of Pharmacies, etc. B.2 MHLW Ministerial Ordinance No. 136,2004 : Standards for Quality Assurance for Drugs, Quasi-drugs, Cosmetics and Medical Devices B.3 MHLW Ministerial Ordinance No. 179, 2004: Standards for Manufacturing Control and Quality Control for Drugs and Quasidrugs C EU GMP Guide C.1 Introduction C.2 Commission Directive 2003/94/EC C.3 Directive 91/412/EEC C.4 Part I Basic Requirements for Medicinal Products C.5 Part II Basic Requirements for Active Substances used as Starting Materials C.6.1 Annex 1 Manufacture of Sterile Medicinal Products C.6.2 Annex 2 Manufacture of Biological Medicinal Products for Human Use C.6.3 Annex 3 Manufacture of Radiopharmaceuticals C.6.4 Annex 4 Manufacture of Veterinary Medicinal Products other than Immunological Veterinary Medicinal Products C.6.5 Annex 5 Manufacture of Immunological Veterinary Medicinal Products C.6.6 Annex 6 Manufacture of medicinal gases (1)

A Information C.6.7 Annex 7 Manufacture of Herbal Medicinal Products C.6.8 Annex 8 Sampling of Starting and Packaging Materials C.6.9 Annex 9 Manufacture of Liquids, Creams and Ointments C.6.10 Annex 10 Manufacture of Pressurised Metered Dose Aerosol Preparations for Inhalation C.6.11 Annex 11 Computerised Systems C.6.12 Annex 12 Use of Ionising Radiation in the Manufacture of Medicinal Products C.6.13 Annex 13 Revision 1 Manufacture of Investigational Medicinal Products C.6.14 Annex 14 Revision Manufacture of medicinal Products derived from human Blood or Plasma C.6.15 Annex 15 Final Version Qualification and validation C.6.16 Annex 16 Final Version: Certification by a Qualified Person and Batch Release C.6.17 Annex 17 Final version Parametric Release C.6.18 Annex 18 Final version Good Manufacturing Practice for Active Pharmaceutical Ingredients C.6.19 Annex 19 Reference Samples and Retention Samples C.6.20 Annex 20: Quality Risk Management C.7 Glossary C.8 Index EU GMP Guide C.1 to C.6.20 C.9 Note For Guidance on Quality of Water for Pharmaceutical Use C.9 Index C.9 D USA: CFR and FDA Guidelines D.1 Code of Federal Regulations D.1 Index chapter D.1 D.2 Guideline on General Principles of Process Validation D.2 Index chapter D.2 D.3 Guide to Inspections of High Purity Water Systems D.3 Index chapter D.3 D.4 Guide to Inspections of Validation of Cleaning Processes D.4 Index chapter D.4 (2)

Contents file 4 to 5 D.5 Guide to inspections of oral solid dosage forms pre/post approval issues for development and validation D.5 Index chapter D.5 D.6 Guide to Inspections of Validation Documentation D.6 Index chapter D.6 D.7 Guide to Inspection of Computerized Systems in Drug Processing D.7 Index chapter D.7 D.8 Guide to Inspections of Pharmaceutical Quality Control Laboratories D.8 Index chapter D.8 D.9 Guidance for Industry: Investigating Out-of-Specification (OOS) Test Results for Pharmaceutical Production D.9 Index chapter D.9 D.10 Guidance for Industry Sterile Drug Products Produced by Aseptic Processing Current Good Manufacturing Practice D.10 Index chapter D.10 D.11 Guidance for Industry PAT A Framework for Innovative Pharmaceutical Development, Manufacturing, and Quality Assurance D.11 Index chapter D.11 D.12 Guidance for Industry Part 11, Electronic Records; Electronic Signatures Scope and Application D.12 Index chapter D.12 D.13 21 CFR Part 820 Quality System Regulation D.13 Index chapter D.13 D.14 Guidance for Industry Quality Systems Approach to Pharmaceutical CGMP Regulations D.14 Index chapter D.14 D.15 Federal Food, Drug, and Cosmetic Act E ICH-Guidelines E.1.A ICH Q1A(R2): Stability Testing of New Drug Substances and Products E.1.B ICH Q1B: Stability Testing: Photostability Testing of New Drug Substances and Products E.1.C ICH Q1C: Stability Testing: Requirements for New Dosage Forms E.1.D ICH Q1D: will be published in one of the following updates. E.1.E ICH Q1E: will be published in one of the following updates. E.1.F ICH Q1F: will be published in one of the following updates. E.1 Index ICH Q1 (3)

A Information E.2 ICH Q2(R1): Validation of Analytical Procedures: Text and Methodology E.2 Index ICH Q2(R1) E.3.A ICH Q3A(R2): Impurities in New Drug Substances E.3.B ICH Q3B(R2): E.3.C Impurities in New Drug Products ICH Q3C(R3): Guideline for Residual Solvents E.3 Index ICH Q3 E.4 ICH Q4: E.4.A E.4.B Pharmacopoeias ICH Q4A: Pharmacopoeial Harmonisation ICH Q4B: Regions E.4.B.1 ICH Q4B Annex 1: Regions on Residue on Ignition/Sulphated Ash General Chapter E.4.B.2 ICH Q4B Annex 2: Regions on Test for Extractable Volume of Parenteral Preparations General Chapter E.4.B.3 ICH Q4B Annex 3: Regions on Test for Particulate Contamination: Sub-Visible Particles General Chapter E.4 Index ICH Q4 E.5.A E.5.B E.5.C E.5.D E.5.E ICH Q5A(R1): Viral Safety Evaluation of Biotechnology Products Derived from Cell Lines of Human or Animal Origin ICH Q5B: Quality of Biotechnological Products: Analysis of the Expression Construct in Cells Used for Production of R-DNA Derived Protein Products ICH Q5C: Quality of Biotechnological Products: Stability Testing of Biotechnological/ Biological Products ICH Q5D: Derivation and Characterisation of Cell Substrates used for Production of Biotechnological/Biological Products ICH Q5E: Comparability of Biotechnological/Biological Products Subject to Changes in their Manufacturing Process (4)

Contents file 4 to 5 E.5 Index ICH Q5 E.6.A ICH Q6A: Specifications: Test Procedures and Acceptance Criteria for New Drug Substances and New Drug Products: Chemical Substances E.6.B ICH Q6B: Specifications: Test Procedures and Acceptance Criteria for Biotechnological/ Biological Products E.6 Index ICH Q6 E.7 ICH Q7: Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients E.7.1 How to do Document Interpretation of the ICH Q7a Guide E.7 Index ICH Q7 E.8 ICH Q8: Pharmaceutical Development E.8.1 Annex to ICH Q8: Pharmaceutical Development E.8 Index ICH Q8 E.9 ICH Q9: Quality Risk Management E.9 Index ICH Q9 E.10 ICH Q10: Pharmaceutical Quality System E.10 Index ICH Q10 F PIC/S Guidelines F.1 Recommendations on Validation Master Plan Installation and Operational Qualification Non-Sterile Process Validation Cleaning Validation (PIC/S PI 006) F.1 Index chapter F.1 F.2 Recommendations on the Validation of Aseptic Processes (PIC/S PI 007) F.2 Index chapter F.2 F.3 PIC/S Guidance Good Practices for Computerised Systems in Regulated GXP Environments (PIC/S PI 011) F.3 Index chapter F.3 F.4 Aide-Memoire Inspection of Pharmaceutical Quality Control Laboratories (PIC/S PI 023-1) F.4 Annex to PIC/S PI 023-1 Aide-Memoire for Inspections of Pharmaceutical Quality Control Laboratories F.4 Index chapter F.4 F.5 Explanatory Notes for Industry on the Preparation of a Site Master File F.5 Index chapter F.5 F.6 Aide mémoire Inspection of Utilities F.6 Index chapter F.6 (5)

A Information G WHO Guidelines G.1 Guide to good storage practices for pharmaceuticals G.1 Index chapter G.1 H Other Organizations This chapter is left empty in order to facilitate later additions. (6)