Weber.tec 822 - Version 1 Page 1 of 7 SAFETY DATA SHEET Weber.tec 822 SDS according to Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Annex II-EU SECTION 1: Identification of the substance / mixture and of the company / undertaking Date issued 15.07.2015 1.1. Product identifier Product name Weber.tec 822 Article no. 27764521 GTIN No. 4011361100458, 4011361100465, 4011361102384 NOBB No. 43022745, 43022764, 43108478 1.2. Relevant identified uses of the substance or mixture and uses advised against Product group Use of the substance / preparation Dispersion Membrane 1.3. Details of the supplier of the safety data sheet Company name Postal address Weber Saint-Gobain Byggevarer AS Postboks 216 Alnabru Postcode 0614 City Country OSLO Norway Telephone number +47 41 63 50 46 Email Website Enterprise No. Contact person teknisk@weber-norge.no www.weber-norge.no NO 940 198 178 MVA Helle E. Fossheim 1.4. Emergency telephone number Emergency telephone Telephone number: 22 59 13 00 Description: GIFTINFORMASJONSSENTRALEN
Weber.tec 822 - Version 1 Page 2 of 7 SECTION 2: Hazards identification 2.1. Classification of substance or mixture 2.2. Label elements R-phrases Hazard statements The product is not classified. The product is not classified according to the CLP regulation. 2.3. Other hazards SECTION 3: Composition / information on ingredients 3.2. Mixtures Substance Identification Classification Contents Ammonia...% CAS No.: 1336-21-6 EC No.: 215-647-6 Index No.: 007-001-01-2 Skin Corr. 1B;H314 Aquatic Acute 1;H400 Note : B 0,1 1 % Description of the mixture Acrylic styrene copolymer in water. Substance comments For the wording of the risk phrases in section 3 refer to section 16. SECTION 4: First aid measures 4.1. Description of first aid measures General Inhalation Skin contact Eye contact Ingestion No recommendation given, but first aid may still be required in case of accidental exposure, inhalation or ingestion of this chemical. If in doubt, GET MEDICAL ATTENTION PROMPTLY! Move the exposed person to fresh air at once. Get medical attention if any discomfort continues. Wash skin with soap and water. Remove contaminated clothing immediately and wash skin with soap and water. Immediately rinse with water for several minutes. Contact physician if discomfort continues. Get medical attention if any discomfort continues. 4.2. Most important symptoms and effects, both acute and delayed 4.3. Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Choose extinguishing media suitable to surrounding fire. 5.2. Special hazards arising from the substance or mixture Fire and explosion hazards No specific precautions.
Weber.tec 822 - Version 1 Page 3 of 7 5.3. Advice for firefighters Fire fighting procedures No specific fire fighting procedure given. Use methods suitable to surrounding conditions. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures Personal protection measures No special measures required. Wear necessary protective equipment. Refer to section 8. 6.2. Environmental precautions Environmental precautionary measures Do not allow to enter drains, sewers or watercourses. Contain spillages with sand, earth or any suitable adsorbent material. 6.3. Methods and material for containment and cleaning up Cleaning method Absorb with sand or other inert absorbent. 6.4. Reference to other sections SECTION 7: Handling and storage 7.1. Precautions for safe handling Handling No specific usage precautions noted. 7.2. Conditions for safe storage, including any incompatibilities Special risks and properties No special properties or dangers. Conditions for safe storage Additional information on storage conditions Storage temperature Store frost-free. Comments: Stored at temperatures between 5 og 25 ºC. 7.3. Specific end use(s) SECTION 8: Exposure controls / personal protection 8.1. Control parameters 8.2. Exposure controls Limitation of exposure on workplace An eye wash bottle must be available at the work site. Provide adequate ventilation.
Weber.tec 822 - Version 1 Page 4 of 7 Safety signs Precautionary measures to prevent exposure Instruction on measures to prevent exposure Normal precautions for handling chemicals should be followed. Respiratory protection Respiratory protection No specific recommendations. When spraying: Use respiratory equipment with particle filter, type P2. Hand protection Hand protection Use suitable protective gloves if risk of skin contact. PVC gloves are recommended. Other types of gloves can be recommended by the glove supplier. Eye / face protection Eye protection Use safety goggles or face shield in case of splash risk. Skin protection Suitable protective clothing Skin protection remark Wear protective clothing as needed. Use cleansing cream and not organic solvents to remove dried dispersion. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Colour Odour ph Viscous liquid. Light grey Pink. Characteristic. Status: In delivery state Value: > 7 Melting point / melting range Value: 0 C Boiling point / boiling range Value: 100 C Flash point Vapour pressure Specific gravity Solubility in water Spontaneous combustability Comments: Not relevant. Value: 23 hpa Method: DIN 51640 Value: ~ 1500 kg/m3 Miscible. Comments: The product is not self-igniting. 9.2.
Weber.tec 822 - Version 1 Page 5 of 7 SECTION 10: Stability and reactivity 10.1. Reactivity Reactivity Stable. Non-flammable. 10.2. Chemical stability 10.3. Possibility of hazardous reactions Possibility of hazardous reactions None. 10.4. Conditions to avoid Conditions to avoid Can coagulate by adding acids or soluble metal salts. 10.5. Incompatible materials 10.6. Hazardous decomposition products Hazardous decomposition products None under normal conditions. Dried, wiped up, product is combustible. SECTION 11: Toxicological information 11.1. Information on toxicological effects regarding health hazards General No specific health warnings noted. Potential acute effects Inhalation Skin contact Eye contact Ingestion Minimal inhalation hazard. Skin irritation is not anticipated when used normally. May be degreasing after frequent contact. May cause temporary eye irritation. May cause discomfort if swallowed. Delayed effects / repeated exposure Sensitisation Chronic effects None known. None known. Carcinogenic, Mutagenic or Reprotoxic Carcinogenicity, other information
Weber.tec 822 - Version 1 Page 6 of 7 Mutagenicity Teratogenic properties Reproductive toxicity SECTION 12: Ecological information 12.1. Toxicity Ecotoxicity The product is not expected to be hazardous to the environment. 12.2. Persistence and degradability 12.3. Bioaccumulative potential Bioaccumulative potential Will not bio-accumulate. 12.4. Mobility in soil Mobility Not regarded as dangerous for the environment. The product is miscible with water. May spread in water systems. 12.5. Results of PBT and vpvb assessment 12.6. Other adverse effects Environmental details, summation When the product is used for the specified purposes and handled according to directions, the product poses a minimal risk of negative environmental impacts. SECTION 13: Disposal considerations 13.1. Waste treatment methods Specify the appropriate methods of disposal Product classified as hazardous waste Packaging classified as hazardous waste EWC waste code Collect with absorbent material or scrape up (if the liquid is very viscous), fill in marked containers and deliver to approved depot. No No EWC: 080416 aqueous liquid waste containing adhesives or sealants other than those mentioned in 08 04 15 NORSAS 7053 Waste and residues are to be disposed of in accordance with local regulations. The knowledge of the supplier is that this product is not considered to be hazardous waste according to EU Directive 91/689 /EF. SECTION 14: Transport information 14.1. UN number 14.2. UN proper shipping name
Weber.tec 822 - Version 1 Page 7 of 7 14.3. Transport hazard class(es) 14.4. Packing group 14.5. Environmental hazards 14.6. Special precautions for user 14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Additional information Additional information The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA, ADR/RID). Special transport conditions: Protect from frost. SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations / legislation specific for the substance or mixture EEC-directive References (laws/regulations) No duty to declare owing to Regulations on the registration, evaluation, authorization and restriction of chemicals (REACH). The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716). The List of Wastes (England) (Amendment) Regulations 2005. (SI 2005 No. 895). «Stofflisten»: List of hazardous substances. Occupational exposure limits for workplace exposure. Transport of dangerous goods: ADR, RID, IMDG, IATA. Produktet is not classified. 15.2. Chemical safety assessment SECTION 16: Supplier's notes List of relevant H-phrases (Section 2 and 3) Prepared by This information only applies for the above product, and may necessarily not be applicable if the product is used together with one or more other products, or as part of a process. The datasheet are made on the basis of information given by the manufacturer. It is the individual receiver s duty to ensure that the information provided in this MSDS is read and understood by everyone who uses, handle or in any way come in contact with the product. H400 Very toxic to aquatic life. H314 Causes severe skin burns and eye damage. Helle E. Fossheim