GU A R D I A N GL A S S

GU A R D I A N GL A S S INTERIOR COLLECTION DecoCristal SatinDeco DiamondGuard ShowerGuard LamiGlass Deco UltraMirror www.guardian.com www.guardian-europe.com www.showerguardglass.com

UL T R A M I R R O R GUARDIAN UltraMirror is a high quality mirror, distortion-free, offering durability and beautiful reflectance. The possibilities for decoration are unlimited: small and confined spaces become bigger, dark and dull rooms fill up with light. GUARDIAN UltraMirror is an ecologically friendly product exceeding all existing quality requirements set by the European mirror norm EN 1036. Appearance GUARDIAN UltraMirror is highly reflective and offers a true image reflectance with virtually no distortion. Environmentally friendly It respects the environment with a copper-free manufacturing process and a reduced lead content protective paint (<0.5%). Quality Copper-free manufacturing process enhances mirror protection against corrosion. It offers up to 3 times more protection than conventional mirror (in accordance with ISO 3770). Heat resistance It can be used in environments up to 60 C. Proximity with a strong heat source must be avoided. Moisture resistance If installation norm EN 1036 is respected, the mirror can be used in an environment where moisture is present (e.g. in a bathroom). Scratch resistant It is also available in DiamondGuard version, in which glass side is more resistant to scratches than ordinary float glass. Safety GUARDIAN UltraMirror is available in two safety versions, with safety film and on LamiGlass for a superior protection. As with float glass, GUARDIAN UltraMirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. As ordinary mirror, it must be stored vertically. It can be cut on the glass side and used in different fabrication processes (drilling, grinding, etc.). Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Do not use any acid or alkali cleaners, the protective coating and the silver layer could be damaged. Sizes:, and 3210 x 6000mm (other dimensions upon request); Thicknesses: 3, 4, 5, 6 and 8mm (10mm is available upon request); Two safety versions are available: GUARDIAN UltraMirror with safety film and GUARDIAN UltraMirror on LamiGlass. Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

G u a r d i a n UL T R A M I R R O R WITH SAFETY FILM GUARDIAN UltraMirror with safety film has been developed to provide increased safety in interior applications. In case of breakage, the glass remains fixed to a safety film, reducing the chance of injury. GUARDIAN UltraMirror with safety film is perfectly suited for bathroom mirrors, decorative walls, wardrobe door mirrors and furniture applications. This product can be applied in all interior decoration projects where improved safety standards are required (homes, offices, restaurants, hotels, stores, elevators, etc.). Safety GUARDIAN UltraMirror with safety film reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together. Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm. Quality Copper free manufacturing process enhances mirror protection against corrosion. clear safety film paint layer mirror Environmentally friendly It respects the environment with a copper free manufacturing process and with a reduced lead content protective paint (<0.5%). UV-sensitive It is designed to be used for interior applications only. Heat resistance Can be used in environments up to 60 C. Proximity with a strong heat source must be avoided. Moisture resistance If installation norm EN 1036 is followed, GUARDIAN UltraMirror with safety film can be used in an environment where moisture is present (e.g. in a bathroom). Scratch resistant It is also available in DiamondGuard version, in which glass side is more resistant to scratches than ordinary float glass. As with typical mirror, GUARDIAN UltraMirror with safety film must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided. Can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.). Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Sizes: ; and 3210 x 6000mm (other dimensions upon request); Thicknesses: 4mm and 6mm. Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror with safety film and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

UL T R A M I R R O R ON L A M I G L A S S GUARDIAN UltraMirror on LamiGlass has been developed by GUARDIAN to combine interior decoration and maximum safety. It can be used in many applications: display cases, decorative walls, ceiling or pillar covers, partitions, etc. This product is suitable for interior rooms where the highest safety standards are required, for public as private places (shopping centres, schools, swimming pools, fitness centres, hospitals, etc.). Safety GUARDIAN UltraMirror on LamiGlass offers increased protection against injury and damage in case of breakage. The product is manufactured with polyvinyl (PVB) interlayer that is designed to hold broken glass fragments together. It is certified to the safety norm EN356, class P1A for 3.3.2 and P2A for 4.4.2. glass As with float glass, GUARDIAN UltraMirror on LamiGlass must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. double PVB opal mirror It can be used in different fabrication processes (drilling, grinding, etc.). Environmentally friendly It respects the environment with a copper free manufacturing process. Quality Copper free manufacturing process enhances mirror protection against corrosion. Heat resistance It can be used in environments up to 60 C. Proximity with a strong heat source must be avoided. Improved moisture resistance If the edges are appropriately protected, it resists against humidity. Scratch resistant It is also available in DiamondGuard version, in which glass side is more resistant to scratches than ordinary float glass. It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive (a list of compatible products is available upon request). It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Sizes: and mm (other dimensions are available upon request); Thicknesses: 3.3.2 (6,76mm) and 4.4.2 (8,76mm). Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror on LamiGlass and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

DIAMONDGUARD GUARDIAN DiamondGuard is the only glass in the market that provides permanent scratch-resistance. Thanks to an unique and proprietary protective coating, the glass surface maintains its elegance longer. The product is ideal for interior decoration including: wall panels, sliding doors, partitions, table tops, shelving, furniture, shop furniture, doors, etc. Scratch resistant GUARDIAN DiamondGuard coating offers to the glass a smoother and harder surface, with most materials simply sliding over it. The glass surface resists scratching from everyday items such as keys, bracelets, laptops, handbags, buttons, as well as many other common objects. Durability and quality GUARDIAN DiamondGuard coating is not a removable plastic film, but a durable and permanent protective layer that is bonded to glass. GUARDIAN DiamondGuard works to retain the beauty of glass, resulting in products that last longer. Appearance Is available on other GUARDIAN products including: LamiGlass, DecoCristal, Ultra- Mirror and low-iron glass. Heat-resistance Contact with a strong heat source must be avoided. UV-sensitive Is designed to be used for interior applications only. GUARDIAN DiamondGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15 C should be maintained in order to prevent condensation. It can be used in different fabrication processes (drilling, grinding, etc.). Maintenance With its smooth surface GUARDIAN DiamondGuard is easy to clean. The protective coating is stable against attack from common acids and alkalis, it doesn t require special cleaning product or coating replenishment. Can be installed with neutral silicon (free of solvent) or doublesided adhesive (a list of compatible products is available upon request). Sizes:, and 3210 x 6000mm (other dimensions are available upon request); Thicknesses: 4, 5, 6, 8, 10, 12 and 15mm. Disclaimer: This information is intended to provide general information about GUARDIAN DiamondGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

SHOWERGUARD GUARDIAN ShowerGuard is the first and only shower glass that provides permanent protection against corrosion and discoloration. GUARDIAN has developed a patented technology that seals the glass surface against corrosion, creating an easy-to-clean surface that will maintain its original appearance for years to come. Easier to clean The surface of GUARDIAN ShowerGuard glass is treated with a patented ion-beam deposition process to seal the surface against attack from chemicals and shower contaminants, allowing your glass to remain smooth and easy to clean. ShowerGuard doesn t require special after-care products or coating replenishment. A soft cloth or a wet sponge is all you need for periodic maintenance. Heat-resistance Contact with a strong heat source must be avoided. Smooth The protective coating provides to the glass a coefficient of friction being less than half that of standard float glass. This results in a much smoother surface than ordinary glass. Durability Unlike spray-on or wipe-on treatments that eventually come off, the coating on GUARDIAN ShowerGuard glass is permanent. So the shower can keep its original beauty for years to come. GUARDIAN ShowerGuard is covered by a 10-year warranty*. UV-sensitive ShowerGuard is designed to be used for interior applications only. Unprotected shower Glass exposed to typical Shower conditions New uncoated glass ShowerGuard Protected glass Exposed to typical Shower conditions * Details of the warranty on www.showerguardglass.com GUARDIAN ShowerGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from glass washers, external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15 C should be maintained in order to prevent condensation. For more information please refer to the Fabricator User Guide (available upon request). Can be used in most common fabrication processes. Should be processed on the coated surface. For further information please use the Fabricatior User Guide. Sizes:, and 3210 x 6000mm (other dimensions are available upon request); Thicknesses: 6, 8 and 10mm. Disclaimer: This information is intended to provide general information about GUARDIAN ShowerGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

DECOCRIS TAL GUARDIAN DecoCristal is a float glass that is lacquered with an opacified paint. It can be used in the widest range of interior decoration projects (e.g. commercial buildings, offices, hotels, homes, etc.) for applications such as partitions, sliding doors, kitchen furniture, tables, wardrobe doors, etc. GUARDIAN DecoCristal offers numerous possibilities (safety version, scratch resistance and personalised colours). Thanks to its optimal combination of colour and brightness, it provides modern design and beauty in any decoration project. Colours The Essentials Black White Swan White Ice White UltraWhite 3935/9005 1820/9003 9010 1240/9003 1820/9003 LI (Low Iron) The Naturals Black Grey Shark Grey True Grey Brown Caramel Wood Brown Grey Beige 0659 1230 Bordeaux 1250 Brown 2180 2410 3004 1370 The Brights Fluo Green Red Fluo Orange Fushia Purple Violet Blue Blue Lagoon 3850 2085/3001 4115/2001 4006 1220/4007 Luminous 2080 4105/5002 Specific colour GUARDIAN DecoCristal can also be personalised in the colour of your choice. SatinDeco on DecoCristal It is also available in a mat version, on a satinated glass, for a soft and elegant appearance. UV-sensitive It is designed to be used for interior applications only. Heat resistance It can be used in environments up to 60 C. Proximity with a strong heat source must be avoided. Scratch resistant It is available in DiamondGuard version, in which the coated side is more resistant to scratches than ordinary float glass. Safety It is available with safety film. Silver Metal Grey 3250/9022 9006 These colours are indicative only, they don t give an accurate reproduction of the DecoCristal range. As with typical float glass, GUARDIAN DecoCristal must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. It can be cut the same way as mirror on the glass side and used in different fabrication processes (hole drilling, grinding, etc.). It cannot be installed on a humid wall. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Fabricator User Guide. It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Sizes: (, 3210 x 6000mm and other dimensions are available upon request); Thicknesses: 4 and 6mm (3, 8 and 10mm upon request). Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

DECOCRIS TAL WITH SAFETY FILM GUARDIAN DecoCristal with safety film is a float glass lacquered with an opacified paint that is also strengthened by a clear safety film. In case of breakage, the glass remains fixed to the safety film, reducing the chance of injury. GUARDIAN DecoCristal with safety film can be used in the widest range of interior decoration projects where improved safety standards are required (homes, offices, restaurants, etc.). Perfectly suited for decorative wall, wardrobe door and furniture application, it will provide an optimal combination of style and safety. Safety GUARDIAN DecoCristal with safety film reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together. Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm. clear safety film paint layer glass Quality The safety film protects the paint layer from possible scratches. UV-sensitive It is designed to be used for interior applications only. Heat resistance It can be used in environments up to 60 C. Proximity with a strong heat source must be avoided. Improved moisture resistance The safety film offers an improved moisture resistance. Scratch resistant It is available in DiamondGuard version, in which treated side is more resistant to scratches than ordinary float glass. As with typical float glass, GUARDIAN DecoCristal with safety film must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.). A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Fabricatior User Guide. It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. The following colours, sizes and thicknesses are available: Colours: All the standard and custom colours; Sizes: (, 3210 x 6000mm and other dimensions are available upon request); Thicknesses: 4mm and 6mm (3, 8 and 10mm upon request). Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal with safety film and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

L A M I GL A S S D E C O GUARDIAN LamiGlass Deco is a product composed of two sheets of float glass bonded by one or several coloured PVB interlayers. GUARDIAN LamiGlass Deco brings colours, light and safety in the decorative and architectural world. It can be used in many applications: windows, decorative wall, ceiling, pillar, stairs etc. This product is suitable for exterior and interior, for public and private places, where the highest safety standards are required (shopping centres, universities, swimming pools, fitness centres, hospitals, etc.). Safety GUARDIAN LamiGlass Deco offers increased protection against injuries and damages in case of breakage. It is manufactured with a highly resistant coloured PVB interlayer that is designed to hold broken glass fragments together. The industrial procedure used to produce the PVB interlayer is subject to the strictest standards of quality control: EN ISO 9002. glass coloured PVB interlayers glass Colours There are 15 foundation colours, which can be combined (4 colours layers maximum) or used separately. Thus GUARDIAN is able to personalize GUARDIAN LamiGlass Deco in the colour of your choice, there are over 3.000 transparent, translucent or opaque colour options*. Coral Rose Ref: 0001 Aquamarine Ref: 0002 Smoke Grey Ref: 0003 Sahara Sun Ref: 0004 Ruby Red Ref: 0005 Sapphire Ref: 0006 Evening Shadow Ref: 0007 Golden Light Ref: 0008 Arctic Snow Ref: 0009 Cool White Ref: 000A Deep Red Ref: 000C True Blue Ref: 000D Tangerine Ref: 000E Polar White Ref: 000F Absolute black Ref: 000G Uses Perfect for decorative uses both inside and outside. Appearance It is also available on UltraMirror, SatinDeco, DecoCristal and low-iron glass. GUARDIAN LamiGlass Deco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided. It can be used in different fabrication processes (drilling, grinding, etc.). These colours are indicative only, they don t give an accurate reproduction of the LamiGlass Deco range. Acoustic properties This product can also be combined with GUARDIAN LamiGlass Acoustic. * Light coloured PVB as the yellow one have to be protected by another PVB, clear or coloured It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive (a list of compatible products is available upon request). It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product. Sizes : 1800, 2000, 2250, 2400, x 3210 and 3210 x 6000 mm (other dimensions are available upon request); Thicknesses : 3+3, 4+4, 5+5, 6+6, 8+8 and 10+10 (12+12 only in: 1800 x 3210 mm). Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Deco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process

SAT INDECO GUARDIAN SatinDeco is an acid-etched glass that offers an excellent surface finish, making it very easy to clean. Thanks to its elegant appearance and great versatility, this glass is ideal for a wide range of applications including: windows, doors, floors, homes, offices, hotels, public buildings, shops, etc. GUARDIAN SatinDeco has become a key product in modern day decoration creating a elegant, clear and bright environment. Appearance and Quality GUARDIAN SatinDeco has an excellent silky finish. It disperses the light and transforms the transparent float into a translucent glass. Uses Perfect for decorative applications indoor and outdoor. Easy to clean With its smooth surface SatinDeco is easy to clean and helps prevent finger prints. Environment GUARDIAN SatinDeco manufacturing line includes the most advanced technology to treat any waste product that is derived from the manufacturing process. GUARDIAN s SatinDeco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided. Can be cut, bevel, curve and drill. The product can also be tempered (flat or curved), painted or printed, laminated, mirror-coated, etc. SatinDeco on DecoCristal Can also be lacquered with a coloured and opacified organic paint. Available in all the standard DecoCristal colours and even in the colour of your choice. SatinDeco on LamiGlass Can be laminated with PVB available in acoustic version and in different colours. Other combinations GUARDIAN SatinDeco is also available on UltraMirror, low-iron glass and in Double Side. Similar to standard glass, it can be installed with neutral silicon (free of solvent) or double-sided adhesive. Once installed, it does not require any special attention. Can be easily washed using a clean cloth with a standard and nonabrasive glass cleaning product. The following thicknesses and sizes are available: Sizes: 1800 x 3210,, and 3210 x 6000mm (other dimensions available upon request); Thicknesses: 3, 4, 5, 6, 8, 10, 12 and 15mm (19mm is available upon request); The thicknesses available for SatinDeco on DecoCristal: 3, 4, 6 and 8mm; The compositions available for laminated SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15. Disclaimer: This information is intended to provide general information about GUARDIAN SatinDeco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of the product before any use in an industrial process.

GLASS - INTERIOR COLLECTION Products Colours Sizes (mm x mm) Thicknesses (mm) Compatibility with other products Other compositions can be considered on demand Certifications DecoCristal Standard colours: Black, White, Swan White, Ice White, UltraWhite, Black Grey, Shark Grey, True Bordeaux, Grey Brown, Caramel Brown, Wood Brown, Grey Beige, Fluo Green, Red, Fluo Orange, Fushia, Purple Violet, Blue Luminous, Blue Lagoon, Metal Grey, Silver and custom colours 3210 x 6000 and other dimensions upon request 4 and 6 (3, 8 and 10 upon request) DiamondGuard, ShowerGuard, SatinDeco, Low-iron glass, Safety film DecoCristal with safety film All the standard colours and custom colours Clear safety film 3210 x 6000 and other dimensions upon request 4 and 6 Other thicknesses upon request DiamondGuard, ShowerGuard, SatinDeco, Low-iron glass Safety norm EN 12600, class 3 for 4mm and class 2 for 6mm DiamondGuard Clear 3210 x 6000 Other dimensions upon request 4, 5, 6, 8, 10, 12 and 15 LamiGlass, DecoCristal, UltraMirrors, Low-iron glass LamiGlass Deco Foundation colours: Coral Rose, Aquamarine, Smoke Grey, Sahara Sun, Ruby Red, Sapphire, Evening Shadow, Golden Light, Arctic Snow, Cool White, Deep Red, True Blue, Tangerine, Polar White, Absolute Black and personal combinations 1800 x 3210 2000 x 3210 2400 x 3210 3210 x 6000 Other dimensions upon request 3+3, 4+4, 5+5, 6+6, 8+8 and 10+10 (12+12 in sizes: 1800 x 3210mm) LamiGlass Acoustic, DiamondGuard, ShowerGuard, UltraMirror, SatinDeco, Low-iron glass Safety norm EN 356, class P1A for 33.2 and P2A for 44.2 SatinDeco On LamiGlass: Onix Black, Absolute Black, Polar White, Clear, Translucent, Grey, Bronze, Deep Bronze, Dark Brown, Blue, Saphire Blue, Tangerine, Deep red, Sahara Yellow, Green Mint, Green and personal combinations On DecoCristal: Available in all the standard and custom colours 1800 x 3210 3210 x 6000 Other dimensions upon request 3, 4, 5, 6, 8, 10, 12 and 15; 19 upon request Compositions for laminated SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15 UltraMirrors, DecoCristal, Double Side, LamiGlass, Low-iron glass ShowerGuard Clear 3210 x 6000 Other dimensions upon request 6, 8 and 10 DecoCristal, LamiGlass, UltraMirrors, Low-iron glass UltraMirror Blue paint (backside) 3210 x 6000 Other dimensions upon request 3, 4, 5, 6 and 8 10 upon request DiamondGuard, SatinDeco, LamiGlass, Safety film, Low-iron glass European mirror norm EN 1036 ISO 3770 UltraMirror with safety film Blue paint (backside) Clear safety film 3210 x 6000 Other dimensions upon request 4 and 6 DiamondGuard, SatinDeco, ShowerGuard Safety norm EN 12600, Class 3 for 4mm and Class 2 for 6mm UltraMirror on LamiGlass Double PVB opal (safety certified) 33.2 (6.76mm) 44.2 (8.76mm) DiamondGuard, SatinDeco, ShowerGuard Safety norm EN 356, Class P1A for 33.2 and P2A for 44.2

Guardian Luxguard I Guardian Luxguard II Route de Luxembourg ZI Wolser L-4940 BASCHARAGE L-3452 DUDELANGE Grand-Duché de Luxembourg Grand-Duché de Luxembourg Sales Department: Tel: +352 52 111 203 Fax: +352 51 08 05 Email: dudelangesales@guardian.com 2011 Guardian Industries Corp.