ICC-ES Report PMG-1153 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: EPA WATERSENSE - HYDROPOINT WEATHER-BASED IRRIGATION CONTROLLERS DIVISION: 22 00 00 PLUMBING SECTION: 22 00 00 PLUMBING (IRRIGATION) DIVISION: 32 00 00 EXTERIOR IMPROVEMENTS SECTION: 32 80 10 IRRIGATION SYSTEM CONTROLLERS Report Holder: HYDROPOINT DATA SYSTEMS, INC. 1720 CORPORATE CIRCLE PETALUMA, CA 94954
ICC-ES PMG Product Certificate PMG-1153 Effective Date: November 2017 This listing is subject to re-examination in one year. www.icc-es-pmg.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council CSI: DIVISION: 22 00 00 PLUMBING Section: 22 00 00 Plumbing (Irrigation) DIVISION: 32 00 00 EXTERIOR IMPROVEMENTS Section: 32 80 10 Irrigation System s Product certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier s quality system. Product: Listee: HydroPoint Weather-Based Irrigation s HydroPoint Data Systems, Inc. 1720 Corporate Circle Petaluma, California 94954 www.hydropoint.com Compliance with the following standards: Identification: Installation: EPA WaterSense Specification for Weather-Based Irrigation s (Version 1.0, 11-03-11 edition) The product must bear the HydroPoint name and the model number. The packaging must bear the EPA WaterSense logo and at the manufacturer s discretion, the EPA logo may be imprinted on or adhered to the product. Weather-Based Irrigation s are to be installed in accordance with the manufacturer's instructions and the applicable code. An instruction manual that lists the settings and specific parts used to meet the EPA Specification and the maximum number of stations for the product shall be in included in product packaging and must be followed. Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright 2017 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 4
PMG-1153 Most Widely Accepted and Trusted Page 2 of 4 Model: HydroPoint WeatherTRAK s: Certification Date Model Number C-X-CWM B-X-CWM C-X-SWM B-X-SWM C-X-SPS B-X-SPS C-X-SPH B-X-SPH C-X-SPT B-X-SPT C-X-CH1 B-X-CH1 C-X-CH2 B-X-CH2 Model Name Product Type Weather Data Source Station or Zone Capacity Additional Features and Info 12 x 17 Powder-coated Wall 12 x 17 Powder-coated Wall 16 x 30 Front Entry Pedestal 16 x 30 Front Entry Pedestal 18 x 36 Front Entry Pedestal 18 x 36 Front Entry Pedestal 16 x 38 Top Entry Pedestal 16 x 38 Top Entry Pedestal CH1 Fits 18 x 18 Wall CH1 Fits 18 x 18 Wall
PMG-1153 Most Widely Accepted and Trusted Page 3 of 4 C-X-CH4 B-X-CH4 C-X-CH5 B-X-CH5 C-X-CH7 B-X-CH7 WTLC-C-X- PL WTLC-C-X- PL-F WTSY-C-X- PL WTSY-C-X- PL-F X-CWM-* X-SWM-* WeatherTRAK LC Central Irrigation WeatherTRAK LC Central Irrigation WeatherTRAK Smart Yard Connect WeatherTRAK Smart Yard Connect Pro3 Pro3 Entry Entry 12 x 18 Plastic Wall 12 x 18 Plastic Wall 12 x 18 Plastic Wall 12 x 18 Plastic Wall 12 x 17 Cold Rolled Steel Wall X-SPS-* Pro3 16.75 x 30 Light Duty Front Entry Stainless Steel X-SPH-* Pro3
PMG-1153 Most Widely Accepted and Trusted Page 4 of 4 X-SPT-* X-CH1-* X-CH2-* X-CH4-* X-CH5-* X-CH7-* Pro3 Pro3 Pro3 Pro3 Pro3 Pro3 18 x 36 Heavy Duty Front Entry Stainless Steel 16 x 38 Slope Top Entry Stainless Steel CH1 Fits 18 x 18 Wall Entry Conditions of listing: 1. The HydroPoint models recognized in this listing must be installed in accordance with the manufacturer s published installation instructions and Section 404.1.2(3) of the IgCC or the applicable code(s). 2. Any instruction related to the maintenance of the product must direct the user on how to return the controller to smart mode. The product must not be packaged nor marked to encourage operation of the controller in standard mode. 3. The product, as packaged, must include the same components or attributes that it was tested with to meet the requirements of this EPA specification. For controllers with weather stations, sensors, or rainfall devices, all components tested with the controller must be packaged with the controller. For signal-based controllers, instructions on acquiring the proper weather signal shall be packaged with the controller. 4. The Smart s recognized in this listing are manufactured by the HydroPoint Data Systems Inc., in Petaluma, California, under a quality control program with an annual surveillance inspection by ICC-ES.