Distributor Price List

0 Distributor Price List Effective December 1, 2013 Page Contents 1 Base Machine Prices 2 Flex HPS Options 3 Flex HPD Options 4 Flex HPA Options 5 Flex LPS Options 6 Flex LPD Options 7 Flex LPA Options 8 Flex RTD Options 9 Flex RTA Options 10 CTS & SENTRY Options 11 Distributor Discount Schedule Orion Terms & Conditions Out of Area Sales Policy Factory & Customer Service 4750 County Road 13 NE Alexandria, MN 56308 Phone 800-535-2730 Fax 320-852-7621 Sales / Quoting / Orders sales@orionpackaging.com quoting@orionpackaging.com orders@orionpackaging.com Distributor Support Web Site www.support.orionpackaging.com

Orion Packaging Systems Standard Machine Model Price List December 1, 2013 FLEX SERIES HIGH Profile Models US$ Flex HPS Standard Duty with Touch-Screen Control Features $9,195 Flex HPD Heavy Duty with Color Touch-Screen & Deluxe Control Features $10,750 Flex HPA Heavy Duty AUTOMATIC with Color Touch-Screen & Deluxe Control Features $15,450 Flex CTS Conveyorized 2 Station AUTOMATIC $29,900 LOW Profile Models Flex LPS Standard Duty with Touch-Screen Control Features $9,395 Flex LPD Heavy Duty with Color Touch-Screen & Deluxe Control Features $10,995 Flex LPA Heavy Duty AUTOMATIC with Color Touch-Screen & Deluxe Control Features $15,595 ROTARY TOWER Models Flex RTD Integral Stand with Color Touch-Screen & Deluxe Control Features $15,750 Flex RTA Integral Stand AUTOMATIC with Color Touch-Screen & Deluxe Control Features $19,750 SENTRY SENTRY Low Profile Semi-Automatic $6,250 IN-LINE AUTOMATIC SYSTEMS Each Include 1 Infeed, Wrap Zone, 1 Exit Powered Conveyors FA Deluxe Heavy Duty Turntable In-Line System $55,400 MA-Standard Rotary Tower In-Line System $50,400 MA-Deluxe Deluxe Heavy Duty Rotary Tower In-Line System $61,700 MA-X Maximum Duty High Speed Rotary Tower In-Line System $91,600 Machine Specifications available on Quote Templates Contact your Orion RSM or Distributor Support for Models or Options not listed Orion Distributor Support: 800-535-2730 / www.support.orionpackaging.com 1

Options for High Profile Standard HPS Model HPS-021 Extended Mast for loads up to 110 tall $895 Split Frame, Oversized Load Option HPS-043 Split Base Frame with Quick Disconnect and 3' of Cable between the Tower Base & Turntable sections HPS-061 30" Insta-Thread Film Carriage upgrade $695 HPS-063 Insta-Cut Automatic Film Web Severance. Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (NOT Available in CANADA) $550 HPS-065 Manual Film Roping Device within the InstaThread Carriage for added load unitization and/or breathe-ability. Adjustable Roping down to Minimum 1" Web $495 Weigh Scale Options HPS-086 HPS-087 ELECTRONIC WEIGH SCALE PACKAGE - Split Frame with Platform Scale installed under Turntable - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. ELECTRONIC WEIGH SCALE PACKAGE - Platform Scale installed under machine base frame - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. $3,950 $4,950 HPS-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 HPS-085 Upgrade from 4 to 8 Casters, 4,500 Pound Capacity $395 HPS-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $890 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $330 2

Options for High Profile Deluxe HPD Model HPD-021 Extended Mast for loads up to 110 tall $895 Turntable, Base Frame, Oversized Load Options HPD-041 18" Extended Base Frame for Oversized Loads $895 HPD-042 36" Extended Base Frame for Oversized Loads $1,250 (Note: For Dual Turntable machines, base extension is 2X price shown) HPD-043 Split Base Frame with Quick Disconnect and 3' of Cable between the Tower Base & Turntable sections HPD-044 70" Diameter Round Turntable in lieu of 48"x48" (Includes Ring Bearing upgrade) $2,295 HPD-045 55" x 55" Octagonal Turntable in lieu of 48"x48" $850 HPD-046 84" Diameter Turntable (Split Base design - Includes Ring Bearing & Motor upgrade) $6,745 HPD-047 96" Diameter Turntable (Split Base design - Includes Ring Bearing & Motor upgrade) $7,790 HPD-061 30" Insta-Thread Film Carriage upgrade $695 HPD-063 HPD-064 HPD-065 Insta-Cut Automatic Film Web Severance. Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (NOT Available in CANADA) Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. Manual Film Roping Device within the InstaThread Carriage for added load unitization and/or breathe-ability. Adjustable Roping down to Minimum 1" Web HPD-066 Powered Film Roping Device for added load unitization and/or breathe-ability. $4,595 Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) *** Custom Programming and/or Multiple Preset Roping Programs FQ HPD-068 Weigh Scale Options HPD-086 SPLIT-N-ROPE - Automatically slits a standard roll of 20"/30"stretch film into half, then one or both film webs are "roped" into an adjustable size before being applied to load. This creates a "breathable" ventilated wrap for Produce, Heat Dissipation, Freezing of product. Note-1: Not available with option HPD-063. Note-2: 30" requires option HPD-061 ELECTRONIC WEIGH SCALE PACKAGE - Split Frame with Platform Scale installed under Turntable - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. HPD-087 ELECTRONIC WEIGH SCALE PACKAGE - Platform Scale installed under machine base frame - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. Note: Not available with Extended Base Frame 3 $550 $495 $2,295 $3,950 $4,950 HPD-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 HPD-082 DUAL TURNTABLE - Second Turntable to allow wrapping one load while other load is being loaded/unloaded. Turntable operation is Automatically Switched "Left/Right" unless deactivated via the HMI. $4,995 HPD-085 6,000 lb. Max Load Weight Capacity - RING BEARING Upgrade $1,190 HPD-089 Cold Room Package for operation in 1 to 32 Degrees Fahrenheit (Contact Orion for $2,495 Below 0 Degrees Fahrenheit - Special Quote) HPD-090 Top Platen - Free Standing, Integrated with machine controls $4,995 HPD-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $990 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $330

Options for High Profile Automatic HPA Model HPA-021 Extended Mast for loads up to 110 tall $895 Turntable, Base Frame, Oversized Load Options HPA-046 Expansion for Loads up to 54" x 54" (77" Diagonal) for HPA $1,200 HPA-061 30" Insta-Thread Film Carriage upgrade $990 HPA-064 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. HPA-066 Powered Film Roping Device for added load unitization and/or breathe-ability. Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) $4,595 *** Custom Programming and/or Multiple Preset Roping Programs FQ Weigh Scale Options HPA-087 ELECTRONIC WEIGH SCALE PACKAGE - Platform Scale installed under machine base frame - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. NOTE: Not available with HPA-046 HPA-088 ELECTRONIC WEIGH SCALE PACKAGE - Load Cells incorporated into machine base frame - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. $4,950 $5,900 HPA-079 Wireless Remote Start Device with 1 Handheld Unit $695 HPA-079A Additional Handheld Remote Devices EACH (Limit 7) $200 HPA-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 HPA-083 Air Compressor Unit (covered under separate warranty by original manufacturer) $490 HPA-084 6,000 lb. Max Load Weight Capacity - Upgraded Turntable Drive $395 HPA-090 Top Platen - Free Standing, Integrated with machine controls $4,995 HPA-091 Safety Fencing, 2 sides $2,370 HPA-092 Safety Fencing, 2 sides with Photocell detection $3,370 HPA-093 Safety Fencing, 3 sides with Photocell detection, U shaped fence $3,950 HPA-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $1,190 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $330 4

Options for Low Profile Standard LPS Model Loading Ramps for LPS Models LPS-004 Ramp for Pallet-Jack Loading, 60" Wide x 75" Long LPS-008 12" Extensions for Ramp porch - Each $295 LPS-021 Extended Mast for loads up to 110 tall $895 LPS-061 30" Insta-Thread Film Carriage upgrade $695 LPS-063 LPS-065 Insta-Cut Automatic Film Web Severance. Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (NOT Available in CANADA) Manual Film Roping Device within the InstaThread Carriage for added load unitization and/or breathe-ability. Adjustable Roping down to Minimum 1" Web LPS-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 LPS-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $890 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $495 $330 5

Options for Low Profile Deluxe LPD Model Loading Ramps for LPD Models LPD-004 Ramp for Pallet-Jack/Walkie Loading, 60" Wide x 72" Long LPD-008 12" Extensions for Ramp porch - Each $295 LPD-005 Ramp for Weigh Scale Package LPD-086 $1,150 LPD-006 Contoured Ramp for 72" Turntable option LPD-043, 60" Wide $1,150 LPD-021 Extended Mast for loads up to 110 tall $895 Turntable, Base Frame, Oversized Load Options LPD-041 18" Extended Base Frame for Oversized Loads $895 LPD-042 36" Extended Base Frame for Oversized Loads $1,250 (Note: For Dual Turntable machines, base extension is 2X price shown) LPD-043 72" Diameter Turntable on LPD - Eliminates Surround Deck $1,600 LPD-061 30" Insta-Thread Film Carriage upgrade $695 LPD-063 Insta-Cut Automatic Film Web Severance. Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (NOT Available in CANADA) LPD-064 LPD-065 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. Manual Film Roping Device within the InstaThread Carriage for added load unitization and/or breathe-ability. Adjustable Roping down to Minimum 1" Web LPD-066 Powered Film Roping Device for added load unitization and/or breathe-ability. $4,595 Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) *** Custom Programming and/or Multiple Preset Roping Programs FQ LPD-068 Weigh Scale Option SPLIT-N-ROPE - Automatically slits a standard roll of 20"/30"stretch film into half, then one or both film webs are "roped" into an adjustable size before being applied to load. This creates a "breathable" ventilated wrap for Produce, Heat Dissipation, Freezing of product. Note-1: Not available with option LPD-063. Note-2: 30" requires option LPD-061 LPD-086 ELECTRONIC WEIGH SCALE PACKAGE - Load Cells built into LP Base Frame. Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. Note-1: Calibration may be required at installation. Note-2: Reduces Load weight Capacity to 4,000 Pounds. Note-3: Raises Turntable Height to 6". Note-4: Not available with Extended Base Frame $495 $2,295 $5,900 LPD-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 LPD-082 DUAL TURNTABLE - Second Turntable to allow wrapping one load while other load is being loaded/unloaded. Turntable operation is Automatically Switched "Left/Right" unless deactivated via HMI. $5,995 LPD-084 6,000 lb. Max Load Weight Capacity - Upgraded Turntable Support & Drive $650 LPD-085 6,000 lb. Max Load Weight Capacity - RING BEARING Upgrade $1,595 LPD-089 Cold Room Package for operation in 1 to 32 Degrees Fahrenheit (Contact Orion for Below 0 Degrees Fahrenheit - Special Quote) $2,495 LPD-090 Top Platen - Free Standing, Integrated with machine controls $4,995 LPD-091 Turntable Rotation Brake to lock table position when not running $1,895 LPD-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $990 6

Options for Low Profile Automatic LPA Model Loading Ramps for LPA Models LPA-004 Ramp for Pallet-Jack/Walkie Loading, 60" Wide x 72" Long LPA-008 12" Extensions for Ramp porch - Each $295 LPA-005 Ramp for Weigh Scale Package LPA-086 $1,150 LPA-021 Extended Mast for loads up to 110 tall $895 LPA-061 30" Insta-Thread Film Carriage upgrade $990 LPA-064 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. LPA-066 Powered Film Roping Device for added load unitization and/or breathe-ability. Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) $4,595 *** Custom Programming and/or Multiple Preset Roping Programs FQ Weigh Scale Option LPA-086 ELECTRONIC WEIGH SCALE PACKAGE - Load Cells built into LP Base Frame. Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. Note-1: Calibration may be required at installation. Note-2: Reduces Load weight Capacity to 4,000 Pounds. Note-3: Raises Turntable Height to 6". $5,900 LPA-079 Wireless Remote Start Device with 1 Handheld Unit $695 LPA-079A Additional Handheld Remote Devices EACH (Limit 7) $200 LPA-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 LPA-083 Air Compressor Unit (covered under separate warranty by original manufacturer) $490 LPA-084 6,000 lb. Max Load Weight Capacity - Upgraded Turntable Support & Drive $550 LPA-090 Top Platen - Free Standing, Integrated with machine controls $4,995 LPA-091 Safety Fencing, 2 sides $2,370 LPA-092 Safety Fencing, 2 sides with Photocell detection $3,370 LPA-093 Safety Fencing, 3 sides with Photocell detection, U shaped fence $3,950 LPA-091 Turntable Rotation Brake to lock table position when not running $1,895 LPA-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $1,190 7

Options for Rotary Tower Deluxe RTD Model Extended Mast & Frame for Taller than Standard Load Heights RTD-101 Extended Mast for loads up to 95 tall $1,350 RTD-102 Extended Mast for loads up to 110 tall $1,950 Expansion Options for Larger than Standard Load Sizes RTD-041 Extended Arm & Frame for Loads up to 58" x 58" (82" Diagonal) $500 RTD-046 RTD-047 Extended Arm & Frame for Loads up to 65" x 65" (92" Diagonal) Includes Option RTD-103 Gantry Stand (May reduce maximum RPM) Extended Arm & Frame for Loads up to 70" x 70" (100" Diagonal) Includes Option RTD-103 Gantry Stand and Electronic Brake. Arm Speed is reduced to 12 RPM $2,900 $3,900 RTD-061 30" Insta-Thread Film Carriage upgrade $695 RTD-063 Insta-Cut Automatic Film Web Severance. Automatically Cuts the Film Web at the End of the Wrap Cycle, Eliminating the Need for Operator Involvement (NOT Available in CANADA) RTD-064 RTD-065 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. Manual Film Roping Device within the InstaThread Carriage for added load unitization and/or breathe-ability. Adjustable Roping down to Minimum 1" Web RTD-066 Powered Film Roping Device for added load unitization and/or breathe-ability. $4,995 Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) *** Custom Programming and/or Multiple Preset Roping Programs FQ RTD-068 SPLIT-N-ROPE - Automatically slits a standard roll of 20"/30"stretch film into half, then one or both film webs are "roped" into an adjustable size before being applied to load. This creates a "breathable" ventilated wrap for Produce, Heat Dissipation, Freezing of product. Note-1: Not available with option RTD-063. Note-2: 30" requires option RTD-061 Frame / Fencing / Zone Protection Options $495 $2,750 RTD-103 2nd Leg Addition for Gantry style Frame $2,400 RTD-104 7' High x 12' (approx.) Long Wire Mesh Fencing on Two Sides of the Wrap Zone $2,300 with Reflex Photocells installed to Protect Wrap Zone during Wrap Cycle. RTD-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 RTD-105 HIGH SPEED 22 RPM - Upgrade from 16 RPM to 22 RPM Tower Rotation. Includes Options RTD-103 & RTD-104 Gantry Frame and Fencing Options. (May not be compatible with some Mast/Expansion options) $4,900 RTD-089 RTD-090 RTD-092 Cold Room Package for operation in 1 to 32 Degrees Fahrenheit (Contact Orion for Below 0 Degrees Fahrenheit - Special Quote) Rotating Stand, allowing DUAL/TRIPLE WRAP ZONE CAPABILITY. Manually Rotated Swivel Stand, Ring Bearing Supported, Floor Lag-Bolted to Allow Multi- Station Wrapping. Alarm Package - Audible/Visual Alarms for Cycle Start/Run. Audible alarm seconds before cycle start plus visual beacon during cycle. $2,995 $5,995 RTD-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $990 $595 8

Options for Rotary Tower Automatic RTA Model Extended Mast & Frame for Taller than Standard Load Heights RTA-101 Extended Mast for loads up to 95 tall $1,350 RTA-102 Extended Mast for loads up to 110 tall $1,950 Expansion Options for Larger than Standard Load Sizes RTA-042 Extended Arm & Frame for Loads up to 54" x 54" (76" Diagonal) $900 RTA-048 Extended Arm & Frame for Loads up to 60" x 60" (85" Diagonal) Includes Option RTA-103 Gantry Stand and Electronic Brake. Arm Speed is reduced to 12 RPM $3,900 RTA-061 30" Insta-Thread Film Carriage upgrade $990 RTA-064 RTA-066 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. Powered Film Roping Device for added load unitization and/or breathe-ability. Adjustable Down to 1" Rope from the Top Down, Bottom Up, or to the Center (Specified at Time of Order). Includes Control Panel Operator Activation of the Roping Device. (requires 80 PSI, 3 CFM air) $4,995 *** Custom Programming and/or Multiple Preset Roping Programs FQ Frame / Fencing / Zone Protection Options RTA-103 2nd Leg Addition for Gantry style Frame $2,400 RTA-104 7' High x 12' (approx.) Long Wire Mesh Fencing on Two Sides of the Wrap Zone with Reflex Photocells installed to Protect Wrap Zone during Wrap Cycle. $2,300 RTA-079 Wireless Remote Start Device with 1 Handheld Unit. $695 RTA-079A Additional Handheld Remote Devices EACH (Limit 7) $200 RTA-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 RTA-105 HIGH SPEED 22 RPM - Upgrade from 16 RPM to 22 RPM Tower Rotation. Includes Options RTA-103 & RTA-104 Gantry Frame and Fencing Options. (May not be compatible with some Mast/Expansion options) $4,900 RTA-083 Air Compressor Unit (covered under separate warranty by original manufacturer) $490 RTA-092 Alarm Package - Audible/Visual Alarms for Cycle Start/Run. Audible alarm seconds before cycle start plus visual beacon during cycle. RTA-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $1,190 $595 9

Options for CTS Model CTS-021 Extended Mast for loads up to 102 tall $895 CTS-022 Extended Mast for loads up to 110 tall $1,395 CTS-061 30" Insta-Thread Film Carriage upgrade $990 CTS-064 Heavy Gauge Film Upgrade for consistently running films above 110 Gauge. Weigh Scale Option CTS-087 ELECTRONIC WEIGH SCALE PACKAGE - Load Cells incorporated into Conveyor Frame - Includes Digital Indicator Displaying Load Weight with; Gross, Net, Tare, Zero, and Lb./Kg. Conversion Keys, RS232 Port for Interconnection with Scale Related Devices. (Calibration required) $4,900 CTS-081 Special Load Height Photocell for Dark/Opaque Loads (Test Load Recommended) $495 CTS-083 Air Compressor Unit (covered under separate warranty by original manufacturer) $490 CTS-004 Turntable Loading, Exit Conveyor Unloading Option for the CTS-67 $0 CTS-079 Wireless Remote Start Device with 1 Handheld Unit $695 CTS-079A Additional Handheld Remote Devices EACH (Limit 7) $200 CTS-007 Exit Conveyor Upgrade to Powered Conveyor $2,900 CTS-008 CTS-009 CTS-095 5' Gravity Roller Exit Conveyor for use with Option CTS-007 - allows 2 Load Exit Accumulation. Includes Load Detection/Advance Sensor Infeed Conveyor Loading, Turntable Unloading. Includes Power Conveyor Upgrade option #CTS-007 (Note: Reverses Load Travel Direction - See Drawing) Power Transition Conveyor Rollers on Exit Side of Turntable for small pallets or minimal/small pallet bottom boards $2,195 $2,900 $695 CTS-SPK SPARE PARTS KIT (Note - some options may affect kit contents & prices) $1,390 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $330 Options for SENTRY Model SEN-002 Ramp for manual Pallet-Jack Loading/Unloading, 59 Long x 41 wide $495 SEN-021 Extended Mast for 96 Wrap Height Capacity $595 FWS Forklift Wheel Stop Bolt to floor steel stop to protect machine from forklift wheels (Anchor bolts not included) $330 10

Orion A Distributor Discount Structure FLEX Models Discount FLEX HP, LP, RT models 25% FLEX CTS model & Options 15% FLEX Published Options (excluding CTS) 20% FLEX Spare Parts Kits 20% Custom Options 10% SENTRY 25% SENTRY Options 20% IN-LINE AUTOMATIC SYSTEMS Discount All FA & MA models 15% Standard Options 15% Custom Options 10% FA & MA Spare Parts Kits 15% Payment Terms Orders for Standard Machines that total under $29,999: 100% Net 30 days Orders for Standard machines over $30,000 (and all non-standard or special machines): 40% Down payment with order 40% Prior to shipment 20% Net 30 days International orders (including Mexico): 40% Down payment with order 60% Payment due prior to shipment Orion reserves the right to modify payment terms according to the account status of the ordering distributor. Delivery & Shipping F.O.B. Alexandria, Minnesota, USA Transport Cost is NOT included Special handling or packaging is NOT included Installation & Training It is the responsibility of the purchaser to provide physical set-up and assembly, securing/fixing, leveling, field wiring, utilities such as compressed air, and electrical supply. Orion Distributors are expected to provide Start-Up and Training services to their customers for ALL Orion machines sold. Out of Area Sales In all sales of Orion equipment in which the actual installation location of the equipment is not within the recognized sales/service of the selling distributor, the selling distributor must agree to: 1. Provide a commission of 1/3 (33%) of the normal gross profit, based upon the list price of the system, including options, to an Orion full service distributor in the area of installation, as selected by Orion. 2. Add the commission as a line item to their purchase order for the system. 3. Providing the commission to a servicing distributor absolves the selling distributor of all responsibility for warranty services, claims, and requests for technical assistance from the customer. The commission will be paid to the servicing distributor by Orion after receipt of full payment for the system by the selling distributor. The selected servicing distributor will be advised in writing at the time the order is placed with Orion, and must agree to: Accept the amount of the commission, provide at least 90 days of warranty service to the customer after start-up of the equipment, and have a technician on site during the start-up of the equipment to assist in training and system fine tuning. The servicing commission does not cover or include physical installation of the equipment. Physical installation is the responsibility of the customer unless otherwise contracted between the customer and the servicing distributor. Warranty - See Orion warranty statement. 11