ZHOU, CAIZHI EDUCATION RESEARCH INTERESTS EXPERIENCE

Similar documents
SEZER ÖZERİNÇ EDUCATION RESEARCH INTERESTS ACADEMIC EXPERIENCE

Nikhil Chandra Admal

Effects of Grain Boundary Disorder on Yield Strength

REPORT DOCUMENTATION PAGE

Citation for published version (APA): Widjaja, A. (2007). Discrete dislocation modelling of Nano- and Micro-indentation s.n.

Effects of Grain Boundary Disorder on Yield Strength

IMPERFECTIONSFOR BENEFIT. Sub-topics. Point defects Linear defects dislocations Plastic deformation through dislocations motion Surface

Pylin Sarobol U.S. Citizen

Imperfections in the Atomic and Ionic Arrangements

Recent development of modelling techniques in nano- and meso-scale simulations of dislocation dynamics

Dr. Qun Zhou Update: 8/2/2018

Multiscale models of metal plasticity Part II: Crystal plasticity to subgrain microstructures

A STUDY OF THE STRUCTURE AND MECHANICAL PROPERTIES OF ORDERED ALLOYS. Final Report

Alumina Nanohoneycombs with Controlled Spatial Ordering of Pore Channels Fabrication, Theory and Properties K.Y. Ng, C. Cheng and A.H.W.

MICROSTRUCTURAL INVESTIGATION OF SPD PROCESSED MATERIALS CASE STUDY

MICROMAGNETISM AND THE MICROSTRUCTURE OF FERROMAGNETIC SOLIDS

First stages of plasticity in nano- and micro-objects: simulations and experiments

Chapter Outline Dislocations and Strengthening Mechanisms. Introduction

Microstructure, Slip Systems and Yield Stress Anisotropy in Plastic Deformation

Strengthening Mechanisms

Effects of Film Thickness on the Yielding Behavior of Polycrystalline Gold Films

Fabrication of Bulk Nanocrystalline and Ultrafine Grain Materials by Friction Stir Processing

Supplementary Figure 1. Three-dimensional morphology of twins in magnesium alloys. The morphology of deformation twins is usually examined using

Stress and strain gradient in the deformed metallic surface

Predicting fatigue crack initiation in metals using dislocation dynamics simulations

Dept. of Industrial & Manufacturing Systems Engineering 3004 Black Engineering Bldg. Ames, IA 50011

Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the

Length scale and strain rate dependent shear banding deformation in nanoscale Cu/W multilayers

Title containing nano-crystalline. Author(s) Matsumoto, Naoki; Matsumoto, Ryosuk. Citation Journal of Non-Crystalline Solids (

Experimental Report on the Nano-identation Testing of Textured Stainless Steel 904 L and 316 L

Some thoughts on the nonlinearity of cracks in structural materials

Deformation Twinning in Bulk Aluminum with Coarse Grains

Size-Dependent Plasticity in Twinned Metal Nanowires

A305 Bourns Hall, University of California, Riverside, Riverside Phone: (951)

3-D Microstructural Modeling and Simulation of Microstress for Nickel Superalloys

Effects of Electric Field Treatment on Corrosion Behavior of a Ni-Cr-W-Mo Superalloy

Solute effects on interfacial dislocation emission in nanomaterials: nucleation site competition and neutralization

Enhanced Corrosion Resistance of AZ91 Mg Alloy by Plasma Electrolytic Oxidation with Kmno4

WEDNESDAY SEPTEMBER 20, 2017

IMPROVEMENT OF FRICTION SPOT WELDING PROCESS

Chapter 8: Strain Hardening and Annealing

Chapter 8 Strain Hardening and Annealing

3, MSE 791 Mechanical Properties of Nanostructured Materials

EFFECT OF ALLOYING ELEMENTS ON CREEP AND FATIGUE DAMAGE OF NI- BASE SUPERALLOY CAUSED BY STRAIN-INDUCED ANISOTROPIC DIFFUSION

Chapter 2. Ans: e (<100nm size materials are called nanomaterials)

Materials Issues in Fatigue and Fracture. 5.1 Fundamental Concepts 5.2 Ensuring Infinite Life 5.3 Failure 5.4 Summary

MULTI-SCALE & MICROMECHANICS

Stress and Strain Distributions During Compressive Deformation of Titanium Alloy Affected by Microstructure

Formability and Crystallographic Texture in Novel Magnesium Alloys

Payam Parsa. Conducted a research project with annual savings impact of $700,000

Assistant Professor Feb Department of Mechanical Engineering Nanomechanics Laboratory Group Leader Assistant Director Mar 2017 Mar 2018

Laser Based Manufacturing of Wind Turbine Components

Simulation: Powerful tool for Microscale Materials Design and Investigation

MODELING THE MECHANICAL BEHAVIOR OF NANOSCALE METALLIC MULTILAYERS (NMM) WITH COHERENT AND INCOHERENT INTERFACES

Let s show em what we re made of

June 25, 2012 Publication List Mohsen Asle Zaeem (Ph.D.)

Chapter Outline How do atoms arrange themselves to form solids?

Hall-Petch Analysis from a Combined Mechanics and Materials Viewpoint

EFFECT OF GRAIN BOUNDARY MISORIENTATION ON THE ASYMMETRY, ANISOTROPY, AND NUCLEATION STRESSES OF {10 2} TWINNING AND NON-BASAL SLIP IN MAGNESIUM

Metallurgy and Friction Stir Welding. Anne Denquin Onera, Châtillon, France Department of Metallic Structures and Materials

A Combined Discrete-dislocation/Scaledependent Crystal Plasticity Analysis of Deformation and Fracture in Nanomaterials. Presented by: Derek Columbus

Learning Objectives. Chapter Outline. Solidification of Metals. Solidification of Metals

ABSTRACT KEYWORD. Keywords: brittle/ductile interface; tensile test; fracture; Ni/NiAl; Ni/Ni 3 Al. INTRODUCTION

Ill Ryu. Stanford University (Palo Alto, CA) April, 2013 Ph.D. in Materials Science and Engineering with Minor in Mechanical Engineering

STRENGTHENING MECHANISM IN METALS

Dislocation Dynamics in Metals at Atomic-scale: Interactions between Dislocations and Obstacles with Dislocation Character. David Bacon.

GROWTH BEHAVIOR OF GH720LI ALLOY

Module #0. Introduction. READING LIST DIETER: Ch. 1, pp. 1-6

DISLOCATION DENSITIES AND CHARACTER EVOLUTION IN COPPER DEFORMED BY ROLLING UNDER LIQUID NITROGEN FROM X-RAY PEAK PROFILE ANALYSIS

Lecture # 11 References:

OMICS Group International is an amalgamation of Open Access publications

Chapter 7 Dislocations and Strengthening Mechanisms. Dr. Feras Fraige

Nano-indentation of Nanocrystalline Tungsten A Molecular Dynamic Simulation

Microstructural properties of Al-containing refractory high entropy alloys for high temperature applications

Atomistic modeling of different loading paths in single crystal copper and aluminum

CURRICULUM VITAE MEHMET KAYA

Practicum 01: Instrumentation and an Introduction to Nanoscale Measurement

Overdriven dislocation-precipitate interactions at elevated temperatures in aluminum

Introduction to Materials Science

Research on the FSW of Thick Aluminium

AHMAD HADAVI. Civil Engineering from Iran University of Science and Technology, Tehran, Iran, 1978.

REPORT TYPE Final Performance Report

NATURE OF METALS AND ALLOYS

Chapter Outline. How do atoms arrange themselves to form solids?

CURRICULUM VITAE. Chang-Qing Huang

Department of Chemical Engineering and Materials,

Imperfections, Defects and Diffusion

Atomistic simulations of the shear strength and sliding mechanisms of copper niobium interfaces

MECHANICAL PROPERTIES RESEARCH LABORATORY (MPRL) Annual Report. Prepared by:

PROPERTIES OF NANOCRYSTALLINE Al-Cr-Fe-Ti ALLOYS PREPARED BY POWDER METALLURGY. Karel DÁM, Dalibor VOJTĚCH, Filip PRŮŠA

ACCUMULATIVE ROLL BONDING TECHNOLOGY OF ALUMINUM ALLOYS. Stefano ARGENTERO

The effect of twin plane spacing on the deformation of copper containing a high density of growth twins

Development Center, Warren, MI , USA 3 State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing , China

Impact of the irradiation damage recovery during transportation on the subsequent room temperature tensile behavior of irradiated zirconium alloys

Research on the mechanism of weld-line movement of. U-shape TWB parts

JASON GEATHERS. 171 Moultrie Street, Charleston, SC (843) EDUCATION

In situ study of defect migration kinetics in nanoporous Ag with superior radiation. tolerance. and X. Zhang 1, 6 *

Recent research progress in computational solid mechanics

ScienceDirect. Thermal-mechanical analysis of ultrasonic spot welding considering acoustic softening effect

Electron channelling contrast imaging (ECCI) an amazing tool for observations of crystal lattice defects in bulk samples

Transcription:

ZHOU, CAIZHI Couch Assistant Professor of Materials Science & Engineering Department of Materials Science and Engineering Missouri University of Science and Technology B37 McNutt Hall, Rolla, MO 65409-0340 Phone: (573) 341-7599; Email: zhouc@mst.edu EDUCATION Ph.D. in Materials Science and Engineering, Dec 2010 Iowa State University, Ames, IA Dissertation: Dislocation Dynamics Simulations of Plasticity at Small Scales Advisor: Dr. Richard LeSar M.S. in Materials Processing Engineering, Mar 2006 Tianjin University, Tianjin, China Thesis: Investigation of Fatigue Properties of Friction Stir Welding on Aluminum Alloys Advisor: Dr. XinqiYang B.S. in Metallic Materials Science and Engineering, Jun 2003 Tianjin University, Tianjin, China RESEARCH INTERESTS Exploring fundamental material deformation and strengthening mechanisms to develop models bridging length scales and help material design with improved understanding of relationship between microstructure and mechanical behaviors. Research focusing on advanced materials in energy, aerospace, and nano-technology: Materials under extreme conditions (e.g., radiation environment, high loading rate/pressure); Super alloys at high temperatures for aerospace and energy generation industries; Nanostructured and small-sized materials for novel applications; Friction stir welding/processing for industrial applications. EXPERIENCE Assistant Professor, Missouri University of Science and Technology, Jan 2013 Present Postdoctoral Researcher, Los Alamos National Laboratory, Jan 2011 Dec 2012 Development and application of dislocation theory in the plastic deformation of metallic materials; study order and disorder transitions during deformation under different loading conditions. Graduate Research Assistant, Iowa State University, Jan 2007 Dec 2010 Use 3-D dislocation dynamics simulations to identify critical events of dislocations in the plastic deformation at small scales. Graduate Research Assistant, Tianjin University, Sep 2003 Mar 2006-1 -

Investigate fatigue properties of friction stir (FS) welds with different post processing, and calculate residual stresses in weld joints arising from welding process by FEA. Undergraduate Research Assistant, Tianjin University, Sep 2002 Jun 2003 Study the effect of ultrasonic peening on the microstructure changes and fatigue and fracture of welded joints. PEER-REVIEWED JOURNAL ARTICLES 30. S. Huang and C. Zhou, "Enhancement of the ductility in gradient nanograined metals", In preparation. 29. R. Yuan, I. J. Beyerlein and C. Zhou, "Homogenization of plastic deformation in heterogeneous lamella structures", Materials Research Letters, (2016) under reviewing. 28. S. Huang and C. Zhou, "Atomistic modeling of plastic deformation in polycrystalline Cu/Nb nanolayers", Scripta Materialia, (2016) under reviewing. 27. R. Yuan, I. J. Beyerlein and C. Zhou, "Coupled crystal orientation-size effects on the strength of nano crystals", Scientific Reports, (2016) 6: 26254. 26. R. Yuan, I. J. Beyerlein and C. Zhou, "Statistical dislocation activation from grain boundaries and its role in the plastic anisotropy of nanotwinned copper", Acta Materialia, (2016) 110: 8. 25. N. Li and C. Zhou, "Dynamic Probing of Microstructure Evolution in Nanostructured Materials", JOM, (2016) 68: 224. 24. S. Huang, J. Wang and C. Zhou, "Effect of plastic incompatibility on the strain hardening behavior of Al-TiN nanolayered composites", Materials Science and Engineering A, (2015) 636: 430. 23. R. Yuan, I. J. Beyerlein and C. Zhou, "Emergence of grain-size effects in nanocrystalline metals from statistical activation of discrete dislocation sources", Acta Materialia, (2015) 90: 169. 22. C. Zhou, C. Reichhardt, C. J. O. Reichhardt and I. J. Beyerlein, "Dynamic Phases, Pinning, and Pattern Formation for Driven Dislocation Assemblies", Scientific Reports, (2015) 5: 8000. 21. C. Zhou, C. Reichhardt, C. J. O. Reichhardt and I. J. Beyerlein, "Random organization in periodically driven gliding dislocations", Physics Letters A, (2014) 378: 1675. 20. J. Wang, C. Zhou, I. J. Beyerlein and S. Shao, "Modeling Interface-Dominated Mechanical Behavior of Nanolayered Crystalline Composites", JOM, (2014) 66: 102. 19. J. Wang, R. Zhang, C. Zhou, N. Li, I. J. Beyerlein and A. Misra, "Interface dislocation patterns and dislocation Nucleation in Face-centered-cubic and Body-centered-cubic Bi-crystal Interfaces", International Journal of Plasticity, (2014) 53: 40. 18. J. Wang, R. Zhang, C. Zhou, I. J. Beyerlein and A. Misra, "Characterizing interface dislocations by atomically informed Frank-Bilby theory", Journal of Materials Research, (2013) 28: 1646. 17. C. Zhou, J. J. Su, M. J. Graf, C. Reichhardt, A. V. Balatsky and I. J. Beyerlein, "Plastic response of dislocation glide in solid helium under dc strain-rate loading", Physical Review B, (2013) 88: 024513. 16. C. Zhou, J. J. Su, M. J. Graf, C. Reichhardt, A. V. Balatsky and I. J. Beyerlein, "Comment on Giant Plasticity of a Quantum Crystal", Physical Review Letters, (2013) 111: 119601. 15. H. Chu, C. Zhou, J. Wang and I. J. Beyerlein, "An analytical model for the critical shell thickness in - 2 -

core/shell nanowires based on crystallographic slip", Journal of the Mechanics and Physics of Solids, (2013) 67: 2147. 14. H. Chu, C. Zhou, J. Wang and I. J. Beyerlein, "Misfit strain relaxation mechanisms in core/shell nanowires", JOM, (2012) 64: 1258. 13. C. Zhou, J. J. Su, M. J. Graf, C. Reichhardt, A. V. Balatsky and I. J. Beyerlein, "Dislocation induced anomalous softening of solid helium", Philosophical Magazine Letters, (2012) 92: 608. 12. C. Zhou and R. LeSar, "Dislocation dynamics simulations of plasticity in polycrystalline thin film", International Journal of Plasticity, (2012) 30-31: 185. 11. C. Zhou and R. LeSar, "Dislocation dynamics simulations of the Bauschinger effect in metallic thin films", Computational Materials Science, (2012) 54: 350. 10. C. Zhou, I. J. Beyerlein and R. LeSar, "Plastic deformation mechanisms of FCC single crystals at smallscales", Acta Materialia, (2011) 59: 7673. 9. H. Chu, J. Wang, C. Zhou and I. J. Beyerlein, "Self-energy of elliptical dislocation loops in anisotropic crystals and its application for defect-free core/shell nanowires", Acta Materialia, (2011) 59: 7114. 8. C. Zhou, S. B. Biner, and R. LeSar, "Simulations of the Effect of Surface Coatings on Plasticity at Small Scales", Scripta Materialia, (2010) 63:1096. 7. C. Zhou, S. B. Biner, and R. LeSar, "Discrete dislocation dynamics simulations of plasticity at small scales", Acta Materialia, (2010) 58: 1565. 6. C. Zhou, X. Yang, and G. Luan, "Effect of oxide array on the fatigue property of friction stir welds", Scripta Materialia, (2006) 54: 1515. 5. C. Zhou, X. Yang, and G. Luan, "Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy", Journal of Materials Science, (2006) 41: 2771. 4. C. Zhou, X. Yang, and G. Luan, "Investigation of microstructures and fatigue properties of friction stir welded Al-Mg alloy", Materials Chemistry and Physics, (2006) 98: 285. 3. C. Zhou, X. Yang, and G. Luan, "Effect of rootflaws on the fatigue property of friction stir welded 2024-T3 Al alloy", Materials Science and Engineering A, (2006) 418: 155. 2. C. Zhou, X. Yang, and G. Luan, "Research progress on the fatigue behavior of friction stir welded joints", Rare Metal Materials and Engineering, (2006) 35: 1172. (In Chinese) 1. C. Zhou, X. Yang, and G. Luan, "Fatigue properties of friction stir welds in 5083 Al alloy", Scripta Materialia, (2005) 53:1187. CONFERENCE PRESENTATIONS AND POSTERS 21. C. Zhou, R.Yuan and I. J. Beyerlein, "Discrete Crystal Plasticity Finite Element Modeling the Plastic Anisotropy in Nanotwinned Copper", The 53rd. Annual Meeting of the Society of Engineering Science, University of Maryland, College Park, MD. 2016. (Invited talk) 20. C. Zhou, R. Yuan and I. J. Beyerlein, "Analysis of Plastic Anisotropy in Nanotwinned Copper by a Statistical Grain Boundary Dislocation Model", Dislocations 2016 - Purdue Conferences, West Lafayette, IN, 2016 (Talk) - 3 -

19. C. Zhou, "Multiscale Modeling of Crystal Plasticity in Nanocrystalline Metals", 2016 International Symposium on Structural Integrity, Tianjin, China, 2016. (Invited talk)18. C. Zhou, R. Yuan and I. J. Beyerlein, "Coupled crystal orientation-size effects on the strength of nano crystals", TMS Annual meeting, Nashville, TN, 2016. (Invited talk) 17. J. Wang, S. Shao, N. Li and C. Zhou, "Multiscale Perspective of Exploring Interface Roles in Metal-Ceramics Composites", The 52nd. Annual Meeting of the Society of Engineering Science, College Station, TX. 2015. (Invited talk) 16. C. Zhou, R. Yuan and I. J. Beyerlein, "Understanding the effects of dislocation emissions and crystallographic textures on grain-size dependent behavior of nanocrystalline metals", The 52nd. Annual Meeting of the Society of Engineering Science, College Station, TX. 2015. (Invited talk) 15. J. Wang, Shuai Shao, C. Zhou and A. Misra, "Exploring the Role of Interfaces in Metal-Ceramics composites from Atomic to Continuum Scales", TMS Annual meeting, Orlando, FL, 2015. (Invited talk) 14. C. Zhou and S. Huang, "Analysis of mechanical behavior of metal-ceramic nanolayered composites by dislocation dynamics simulations", International Symposium on Plasticity 2015, Montego Bay, Jamaica, 2015. (Invited talk) 13. C. Zhou, R. Yuan and I. J. Beyerlein, "Crystal Plasticity Analysis of Deformation Behavior of Nanocrystalline Nickel", The 51st. Annual Meeting of the Society of Engineering Science, West Lafayette, IN. 2014. (Invited talk) 12. C. Zhou, "3D discrete dislocation dynamics simulations of plasticity in Al-TiN nanolayered composites", TMS 140th annual meeting, San Diego, CA, 2014. (Talk) 11. C. Zhou, " Mechanical response of Al-TiN nanolayered composites: 3D discrete dislocation dynamics analysis", 50th Annual Technical Meeting of The Society of Engineering Science, Providence, RI, 2013. (Talk) 10. C. Zhou, J. Wang, H. Chu, I. J. Beyerlein, "Dislocation dynamics simulations of materials with interfaces", Mesoscale and Continuum Scale Modeling of Materials Defects Workshop, Los Angeles, CA, 2012. (Poster, NSF travel award) 9. C. Zhou, J. Wang, H. Chu, I. J. Beyerlein, "Dislocation dynamics simulations of materials with interfaces", 49th Annual Technical Meeting of The Society of Engineering Science, Atlanta, GA, 2012. (Talk) 8. C. Zhou, J. Wang, I. J. Beyerlein, "Atomically-informed dislocation dynamics simulations of nano-composites", TMS Annual meeting, Orlando, FL, 2012. (Talk) 7. C. Zhou, J. Wang, H. Chu, I. J. Beyerlein, C. A. Bronkhorst, "Atomistically Informed Dislocation Dynamics Simulations on Dislocation-Interface Interactions", The 23rdAnnual Rio Grande Symposium on Advanced Materials, Albuquerque, NM, 2011. (Invited talk) 6. R. LeSar, C. Zhou, "Plasticity at Small Scales", TMS annual meeting, San Diego, CA, 2011. (Invited talk) 5. C. Zhou, R. LeSar, "Discrete Dislocation Simulations of Plasticity of Polycrystalline Thin Films", TMS 140th annual meeting, San Diego, CA, 2011. (Talk) 4. C. Zhou, R. LeSar, "Dislocation Dynamics Simulations of Plasticity at Small Scales", The 47th. Annual Meeting of the Society of Engineering Science, Ames, IA, 2010. (Talk) - 4 -

3. C. Zhou, R. LeSar, "Dislocation dynamics simulations of small-scale plasticity in FCC single crystals", GRC-Thin Film & Small Scale Mechanical Behavior, Waterville, ME, 2010. (Poster) 2. C. Zhou, S. B. Biner, R. LeSar, "3D dislocation dynamics simulations of size- dependent behavior of FCC single crystals", GRC-Physical Metallurgy, Andover, NH, 2009. (Poster) 1. C. Zhou, S. B. Biner, R. LeSar, "3D dislocation dynamics simulations of plasticity in small volumes", TMS Annual Meeting, San Francisco, CA, 2009. (Poster) TEACHING EXPERIENCE MET 3125 Mechanical Testing of Materials Lab, Fall 2016 MET 3120 Fundamental Behavior of Materials, Fall 2016 MET 2125 Microstructural Development Laboratory, Spring 2016 MET 3120 Fundamental Behavior of Materials, Fall 2015 MET 2125 Microstructural Development Laboratory, Spring 2015 MET 3120 Fundamental Behavior of Materials, Fall 2014 MET 218 Microstructural Development Laboratory, Spring 2014 MET 215 Mechanical Behavior of Materials, Fall 2013 MET 218 Microstructural Development Laboratory, Spring 2013 HONORS AND AWARDS TMS Young Leaders Professional Development Award, 2015 NSF postdoctoral travel award, "Materials Defects" workshop, UCLA, 2012. Research Excellence Award, sponsored by Iowa State University, Ames, IA, 2010. Three ScienceDirect TOP25 Hottest Articles & over peer-reviewed 20 journal publications. 1st place in Interinstitutional Academic Competition sponsored by Tianjin University & Nankai University, China, 2006. Excellent Master Graduate Thesis Award, sponsored by Tianjin University, China, 2006. Rong Zhijian Research Excellence Award, sponsored by Tianjin University, China, 2005. REVIEWING ACTIVITIES Reviewer for Acta Materialia, International Journal of Plasticity, Materials Science and Engineering A, International Journal of Fatigue, Engineering Fracture Mechanics, Materials and Design, Journal of Materials Processing Technology, Physics Letters A PROFESSIONAL SOCIETY MEMBERSHIPS The Metallurgical Society of AIME (TMS) The Materials Research Society (MRS) - 5 -