SPECIALIZED WATER TREATMENT One Resource for Water Treatment Technology The AQUATROL Division of MOMAR, Incorporated, formulates and manufactures a variety of technologically advanced products that effectively treat water used in boilers, cooling towers, closed recirculating systems, waste treatment systems, and other water processing equipment. AQUATROL is an integral part of One Company with a strong reputation of superior service, representative and product reliability, and a research and development staff that creates products on the cutting-edge of water treatment technology. Our full line of industrial water treatment chemicals and equipment provides One Source for all of the items you need to meet the challenges associated with protecting and treating the most important equipment and processes in your facility. We specialize in every aspect of water treatment for industrial and commercial applications including: Waterside protection against corrosion, scaling, and fouling on steam boilers, closed hot and chilled systems, and open recirculating systems. Process water treatment chemicals that provide protection against corrosion, scaling and bio fouling in cooling towers, chiller systems, as well as both chilled and hot loops. Chemicals and automated feed systems that prevent pitting, scaling, and corrosion in boiler feed-water condensate systems. Products and expertise that provide solutions for solids/water separation in industrial wastewater programs, helping any manufacturing facility to achieve compliance with municipal wastewater rules, and to escape costly and unnecessary water and sewer surcharges. Value Added Services In addition to our complete line of water treatment chemicals we offer: Biological control for the prevention of Legionnaires Disease Biological testing, using ATP equipment to instantaneously report the activity in your system Pretreatment systems, including reverse osmosis, water softeners, and de-ionizing systems UVA lamps for the disinfection of recirculating water Microprocessor-based feed system controllers that give you complete control of your systems through remote Internet access Complete protection packages for high-stress cooling tower water, as well as both high and low pressure boilers
Expert Water Treatment Applications AquaTrol remains at the forefront of the country s water treatment industry by ensuring the following: We utilize the safest chemicals possible at all times. For example, many of our cooling tower products have neutral or almost neutral ph. Thanks to our advanced technology, our programs handle water hardness at much higher levels without adding acid for ph control. Our boiler products can handle both high and low pressure boiler systems. We re one of the few water treatment specialists in the nation that can handle the entire spectrum of boiler pressures. Our steam treatment chemicals meet and exceed FDA-USDA-OSHA health requirements for steam purity. We have chemical technology and waste treatment products and programs that meet and exceed municipal, state, and federal discharge limits for heavy metals. We use these same products to reduce the amount of sludge produced in a wastewater treatment facility. We provide all of the above programs to guarantee equipment protection, equipment efficiency, as well as to extend the life of equipment, reduce overall energy consumption, and to save water and discharge fees. Water Treatment Programs and Technical Services Cooling Water Treatments Corrosion Inhibitors Wet Lay Up Scale Inhibitors Biofilm Control Cleaners and Descalers High Stress Inhibitors Boiler Treatments One Drum Products Corrosion and Scale Inhibitors Steamline Treatments Oxygen Scavengers Lay Up Equipment Controllers Pumps Softeners RO s ClO 2 Generators - Dual Activate 1 to 720 pounds/day Biocides Time Release Oxidizing Non-Oxidizing Chlorine Dioxide Wide Range of ph Compatible Closed System Treatments Corrosion Inhibitors Dispersants Biological Control Glycol Systems Pretreatments Membrane Cleaners Resin Cleaners RO Antiscalants RO Biocides Waste Treatments Flocculants Coagulants Heavy Metals Removal
The AquaTrol Complete Water Treatment Program consists of four key components: Design Beginning with a facility survey, the design phase of any AquaTrol Program identifies the issues associated with the operation of any water system in your facility. We integrate the collected data into One Solution that provides optimum results at the least overall cost possible, while still ensuring a fully protected and operationally efficient water system. Application Every Aquatrol Water Treatment Program is customized to meet the specific, overall goals as outlined by each individual customer. Then, we utilize advanced chemical and equipment technology to achieve the perfect balance between a fully protected system and one that uses the least amount of chemical and water possible. Control Complete control of your Water Treatment Program is achieved through the implementation of One Program that effectively monitors corrosion, deposits and system efficiency.your AquaTrol technician oversees the program to ensure that equipment life is maximized, water usage is kept to a minimum, and the need for system maintenance is drastically reduced. Environmental Impact Each AquaTrol Program is designed with careful consideration of current and pending environmental regulations, and is assured to meet local, county, state or federal regulations. Programs are continually revised or updated as the need arises, in order to minimize any impact to the environment. Each of these components must be considered in the development of One Comprehensive Program to increase the efficiency of heating and cooling equipment, thus reducing fouling and downtime, as well as providing for significant energy savings, all while saving precious financial resources.
1830 Ellsworth Industrial Dr., N.W. Atlanta, Georgia 30318 Telephone (404) 355-4580 Fax (404) 355-8284 www.momar.com