Worktop postformed laminated th. 28 mm self supporting

Similar documents
VITAL. By I+D+i Actiu.

Product Data Sheet RESOPAL EXCELLENT

RESOPAL -Decorative High Pressure Laminates HPL according to EN 438

cubicle & washroom Polyrey HPL Polyrey Compact Panoprey MFC colour selector

Product Data Sheet for VIVIX by Formica Group. High Pressure Laminates (HPL)

Technical Leaflet. An Introduction to Manufacturing and Material Types

Preface. Contents. 1. Description. 2. Storage and Transportation. 3. Handling and Machining of VIVIX architectural panels

HOSPITALS AND LABORATORIES

Technical Leaflet. Product Data Sheet for HPL Composite Panels

Work surface solutions for the modern laboratory

List of products of harmonised standards Code 21: INTERNAL & EXTERNAL WALL AND CEILING FINISHES. INTERNAL PARTITION KITS

Preface. Contents. 1. Description. 2. Storage and Transportation. 3. Handling and Machining of Formica Laminate

OPAK Technical Information

Available from: Freeform Laminates 2002 Ltd 11 Watts Road, PO Box 11030, Christchurch 8042 tel: fax:

Technical Leaflet. Product Data Sheet for High Pressure Laminates (HPL)

LINEA PLANA PRODUCT SHEET. This product sheet complies with the provisions of Italian Law Decree no. 206/2005 the "Consumer Code"

ACCU TEC MANUFACTURING, INC 1027 SOUTH LINWOOD AVE SANTA ANA, CA FAX Solid Phenolic Lockers

Contents. Preface... xi. 1 History of Cementitious and Polymer Technology and their Unison Introduction References...

SECTION DECORATIVE PLASTIC LAMINATE

DESCRIPTION FEATURES AND BENEFITS AREAS OF USE. Showers & Bathrooms. Balconies & Patios SUITABLE SUBSTRATES. for application on: Concrete & Masonry

Military Specifications

Military Specifications

Product data sheet RESOPLAN HPL as per EN 438-6

Individual. Your motif becomes a design

CEMENTITIOUS FLOOR FINISH

Standard sheet size 3660 x 1610mm, 4200 x 1860mm and 4200 x 1610mm (Gloss decors only) Available to special order 4200 x 1860mm

ABET LAMINATI. Inspirational materials for iconic washrooms

Worktop collection at Nikpol

S63021 XM Breccia Paradiso INSPIRATIONS CLOSE TO YOU DUROPAL THE GUIDE TO GOOD WORKTOPS.

DUROPAL GUIDE TO GAINING AN EDGE. R6264 CT Platon

DUROPAL THE GUIDE TO GOOD WORKTOPS. R6264 CT Platon

High Wear Lam Technical Information

High Pressure Laminate General Specifications

Testing method according to EN Resistance to surface abrasion 10 Revolutions Resistance to scratching 25 Rating 3 3

Unlimited selection FIRE RATED

Polyrey HPL Compact Laminate

CONTENTS. B. System Design and Performance Requirements

Basic Decorative High Pressure Laminates for horizontal and vertical applications

DISTRIBUTED BY EMPIRE INFRASTRUCTURE PTY LTD

HOMAPAL METAL COLLECTION TECHNICAL DATA SHEET

WATERPROOFING OF BALCONIES. COLD-LIQUID APPLIED.

FACTFILE: GCSE Technology and Design

Gypsum Board

Designer Wall Systems. Decorative Laminate FRP. Outstanding durability in many great finishes FRP

SEALING & BONDING SIKA FIRE PROTECTION SOLUTIONS

VITAL. Code: FTM Description: Desks without and with the front beam. Rectangular legs and frame

VITAL. Technical profile. Bench system. Code: FTM Description: Desks with rectangular legs and frames

M O U N T I N G. Compression mounting. Molding Temperature. Resin Form Type. Properties

SECTION PHENOLIC LOCKERS AND BENCHES. B. Section Gypsum Board Area Separation Wall Assemblies.

Reaching beyond the limitation Future Technology is with us. Eco-Friendly Water Base Paint Metacera/Onsemiro/Inocera

Finish Flooring- Hard Flooring Materials

SECTION DECORATIVE PLASTIC LAMINATE FINISHES PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes the following Laminates:

ACCESS FLOORING SPECIFICATION DATA SHEET FOR SWITCH BUILDINGS, PATCH & DATA ROOMS

Sika India Private Limited

Lamitech AST LAM PRODUCT DESCRIPTION

CHAPTER - 1 INTRODUCTION

PAPER TESTING DEVICE. Jörg Golombek Eichhäldenstr Oberstenfeld Germany Telephon / 5607 Telefax / 3873

ORLITE INDUSTRIES. Leading in Composite Materials Solutions. Transportation Sector Overview

INDEX. I. About Technical Furniture Trading III. Laboratory furniture Work benches & Cabinets Cabinet Systems Work tops.

Fire Retardant Technical Information

D300. By Actiu.

Chem Lam Technical data sheet

NEW TYPE D THICKNESS... : WEIGHT... : COMPOSITION... :

IN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS

GLASS FIBRE MESH FABRICS. Stronger ideas for a sustainable world ETICS. Marble slab reinforcement. Lightweight construction boards reinforcement

HIGH PRESSURE LAMINATE CLADDING PANELS SPECIFICATION V1.0

HEAVY TRAFFIC LVT LOOSE-LAY

5.1 Essentials of Polymer Composites

Schools and nurseries. Description of furniture

HIGH PERFORMANCE WOOD PANEL

HIGH PERFORMANCE WOOD PANEL

SGGLITE-FLOOR. The emotional challenge for functional glass flooring SAINT-GOBAIN GLASS SYSTEMS

Static electricity is generated when two nonsimilar

EDITION. Photo reproduced with the permission of Cliff Cuthbertson BATHROOM PANELS FOR CONTRACTORS & SPECIFIERS

Table of Contents. Chapter 1 : Introduction 1. Chapter 2 : Structure and design 15

INFORM. Code: FTSM Description: Reception counters

FOOD & BEVERAGE PROCESSING. High Performance Flooring Systems for Food & Beverage Processing Facilities

Trespa TopLab PLUS. Design à la carte. laboratory. All the best qualities in one panel

STAIRS & ACCESSIBILITY. STAIRS & ACCESSIBILITY Tapiflex Stairs p. 328 Warning Tile p D Studs p. 332 Tactile strip p. 333

INDUSTRIALIZED CONSTRUCTION BRASILIT FIBER CEMENT BOARD, PANELS AND ACCESSORIES FOR THE EXECUTION OF YOUR CONSTRUCTION

Panel elements. Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements

Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner

Silicone-1001 Universal Key Suitable Limited Suitability Not Suitable To be used as a guide line only. Please contact our office for detailed info.

PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET

T: F: E:

(12) Patent Application Publication (10) Pub. No.: US 2011/ A1. Ziegler et al. (43) Pub. Date: Jul. 21, 2011

Samrat External Wall Cladding.

V1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE

100% Recyclable Anti Graffiti Durable Signage & Cladding

Data Sheet 3631 Englisch

SPACIO. By Sigfrido Bilbao.

Division 09. Finishes

TRESPA TOPLAB SCIENTIFIC SURFACE SOLUTIONS

Thermosets and Structural Adhesives. revised by A. Franck, TA Instruments Germany

Technical Bulletin. Finish Options. Product Description. Typical Uses. Fabrication Tips

Notes. air. oil. Resistant Materials Plastics. resins. granules. There are two basic types of plastic: thermosetting plastic and thermoplastic.

2016 GEL COAT PRODUCT

CORK ROLLS AND SHEETS WITH MICROBAN ANTIBACTERIAL PROTECTION TECHNICAL SPECIFICATION

FLOOR COVERING Arch206 BC-II Spring 2016

Single Source Comprehensive Warranty. ARDEX Americas. Swimming Pool Guide

Transcription:

Card index S9 6 Worktop postformed laminated th. 28 mm self supporting Self supporting panel composed of a laminate postformed hot, glued on an agglomerate support type of waterproof CTBH, overall thickness of 28 mm. White edge, finish with double rounded in front. Great possible length without joints (Standard dimensions up to 1.8 meters, higher dimensions up to 3 meters : on request only). Silicone joint black (standard), white or gray. Other types of joints available on request XLA (TradeMark POLYREY) - Decorative high pressure laminate, postforming quality - Decorative coatings consisting of several layers of cellulose and melamined decorative paper polymerized under the action of high pressure and heat. - Provides all the guarantees of durability and safety of HPL laminated products. - Good impact resistance.. - Easy cleaning of the non porous work surface and with few joints.

Card index S9 1 Worktop enamelled glass Glass "Securit" 6 mm thick glued on waterproof chipboard support 22 mm thick white melamine on all edges. No lead and no dangerous products for a better respect of the environment Tempered glass complies with standard EN 12150. Silicone joint black (standard), white or gray. Other types of joints available on request. Emalit Evolution (Trademark Saint Gobain) - Provides all the guarantees of durability and safety of enamelled tempered products - Outstanding resistance to moisture as well as to chemicals and corrosives (except hydrofluoric acid, which obscures the glass) - Resistance to differences in temperature of about 150/200 C - Easy cleaning of the work surface

Card index S9 2 Worktop ceramic tile on waterproof support Ceramic "stretched" "KerAion" 8 mm thick glued on waterproof chipboard support 22 mm thick white melamine on all edges. Enamelled ceramic complies with standard NF EN 121 AI Length of tiles 600, 750 or 900 mm Silicone joint black (standard), white or gray. Other types of joints available on request (polyurethan, epoxy resin, ). KERAION (Trademark AGROB BUCHTAL) - Provides all the guarantees of durability and safety of products in enamelled ceramic - Very good resistance to impact and abrasion - Outstanding resistance to moisture as well as to chemicals and corrosives (except hydrofluoric acid and its compounds) - Fire resistance M0, noncombustible - Easy cleaning of the non porous work surface and with few joints

Card index S9 7 Worktop resin COMPACT EXPRESS on support Panel COMPACT EXPRESS 8 mm thick glued on waterproof chipboard support 22 mm thick, white melamine on all edges. Great possible length without joints (Standard dimensions up to 1.8 meters, higher dimensions up to 3 meters : on request only). Silicone joint black (standard), white or gray. Other types of joints available on request (polyurethan, epoxy resin, ). COMPACT EXPRESS (Trademark FORMICA) The decorative laminated panel high pressure Formica are made of paper impregnated with synthetic resins (melamine resins Formalin for surface paper and overlay, phenolic resins for the kraft paper forming the support) according to European standard EN 438 1. - Provides all the guarantees of durability and safety of products FORMICA - Good impact resistance - Fire resistance M1 - Easy cleaning of the non porous work surface and with few joints.

Card index S9 3 Worktop resin TRESPA ATHLON on waterproof support Panel TRESPA ATHLON 8 mm thick glued on waterproof chipboard support 22 mm thick, white melamine on all edges Great possible length without joints (Standard dimensions up to 1.8 meters, higher dimensions up to 3 meters : on request only). Silicone joint black (standard), white or gray. Other types of joints available on request (polyurethan, epoxy resin, ). ATHLON (Trademark TRESPA) - Coating based decorative thermosetting synthetic resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure (+ / 100 kg/cm2) at high temperature (+ / 150 C) - Provides all the guarantees of durability and safety of TRESPA products - Good impact resistance - Fire resistance M1 and F1 - Easy cleaning of the non porous work surface and with few joints.