OSHA PELs & ACGIH TLVs are listed in Section 8 where applicable.

Similar documents
MATERIAL SAFETY DATA SHEET

SECTION 2 - COMPOSITION AND INFORMATION ON INGREDIENTS Hazardous Ingredients CAS Number Percent

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet: United Duct Sealer Water Based

Page Number:

Section 1 - Identification of Product. Health: 2 Least 0 Flammability: 3 Slight 1 Reactivity: 0 Moderate 2 High 3 Extreme 4

MATERIAL SAFETY DATA SHEET

: *- Chronic Hazard 0 Minimal 1 Slight 2 Moderate 3 Serious 4 Severe Health: 1 Flammability: 0 Reactivity: 0

MATERIAL SAFETY DATA SHEET

TRISOTECH G ROOF INSULATION 1.0" Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

EARTH OPTIONS BY RAID - INSECTICIDAL SOAP

Item No: Item Desc: Shared MSDS s (Item No): MSDS Origin

Version 1. Print Date 11/04/2008 Revision Date 10/16/2008 MSDS Number

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SHINE MASTER POLISH & SEALANT MSDS DATE: 01/04/2006

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. CAS Number Ingredient Name Weight % <20% Water. : Remove to fresh air. Seek medical attention if irritation persists.

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET EFFECTIVE DATE: 2/2010

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFTEY DATA SHEET

SAFETY DATA SHEET FILE NO.: 682 FOAMING INSTANT HAND SANITIZER, ALCOHOL FREE MSDS DATE: 12/3/12

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET TRIM CLEAN 2029HW. Removal of metalworking fluids from machine tools and parts

*MATERIAL SAFETY DATA SHEET*

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

1. Product Identification

OFF! DEEP WOODS SPORTSMEN INSECT REPELLENT I (PUMP SPRAY)

: HORIZON PANEL 2 3/8" 4X8

MATERIAL SAFETY DATA SHEET FILE NO.: 679 NAME OF PRODUCT MSDS DATE: 7/2/12

MATERIAL SAFETY DATA SHEET

U.S. SAFETY DATA SHEET Howes Lubricator Diesel Treat Page 1 of 6

GLADE PLUG-INS SCENTED GEL - TROPICAL MIST

SAFETY DATA SHEET Product #: F000352

WINDEX ADVANCED GLASS & MULTI-SURFACE

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

PLEDGE FURNITURE POLISH REVITALIZING OIL

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MIST-N-SHINE PROFESSIONAL DETAILER MSDS DATE: 1/4/2006

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

EARTH OPTIONS BY RAID - GRASS & WEED KILLER

MATERIAL SAFETY DATA SHEET

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Finished Product

SAFETY DATA SHEET Page 1 of 6 All-Clean

1. Chemical Product and Company Identification

: MULSEAL 52 GAL DRUM

MATERIAL SAFETY DATA SHEET WR MEDICAL ELECTRONICS CO. HYDRATING CREAM

Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

WINDEX ORIGINAL GLASS CLEANER WITH AMMONIA-D

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MSDS DATE: 1/29/13

LOS DATOS DE SEGURIDAD DEL PRODUCTO PUEDEN OBTENERSE EN ESPANOL SI LO REQUIERE.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

OFF! POWERPAD MOSQUITO LAMP (PCP#27227)

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/31/2010 POWER CLEAN ALL-PURPOSE CLEANER

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1 : IDENTIFICATION SECTION 2 : HAZARD(S) IDENTIFICATION SECTION 3 : COMPOSITION / INFORMATION ON INGREDIENTS

Emergency Overview: A hazy liquid which cause mild irritation to the skin eyes. Not flammable

MATERIAL SAFETY DATA SHEET

Version /27/2006

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

DRANO DUAL FORCE FOAMER CLOG REMOVER

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Product #: See Section 1 Name of Product: Revision Date: June 4, 2015 AMMONIUM ACETATE

MATERIAL SAFETY DATA SHEET FILE NO.: 070 AIRTITE CLEAR SILICONIZED ACRYLIC CAULK MSDS DATE: SUPERCEDES:

GLADE PLUG-INS SCENTED OIL APPLE CINNAMON

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET FILE NO.: 640 NAME OF PRODUCT MSDS DATE: 2/24/12

: NON-SLIP AGGREGATE - 50 LB BAG

WINDEX ORIGINAL GLASS CLEANER WITH AMMONIA-D

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

TOILET DUCK THICK LIQUID TOILET BOWL CLEANER

Product Dynatex Anti-Seize & Lubricating Compound. Trade Name of this Product Dynatex Anti-Seize & Lubricating Compound

PLEDGE FURNITURE POLISH REVITALIZING OIL

PLEDGE MULTI-SURFACE EVERYDAY CLEANER - CITRUS CLEAN SCENT

Transcription:

Franklin International MATERIAL SAFETY DATA SHEET MSDS Name: Titebond Original Wood Glue MSDS Number: 5063 Revision Date: 6/14/04 SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Titebond Original Wood Glue CAS Number: none HMIS Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 Company Identification: Franklin International 2020 Bruck Street Columbus OH 43207 Contact: Franklin Technical Services Telephone/Fax: (800) 877-4583 (614) 445-1493 Emergency Phone (24 Hour): Franklin Security (614) 445-1300 Chemtrec (24 Hour): (800) 424-9300 Chemtrec International: (703) 527-3887 Product Class Aliphatic resin emulsion Product Use: wood glue Product Code: 2213 Division: Construction Adhesives & Sealants SECTION 2 - COMPOSITION AND INFORMATION ON INGREDIENTS Hazardous Ingredients CAS Number Percent Product contains no hazardous ingredients or they are below reportable levels. OSHA PELs & ACGIH TLVs are listed in Section 8 where applicable. SECTION 3 - HAZARD IDENTIFICATION EMERGENCY OVERVIEW: Yellow colored water-based adhesive. Slippery in the wet state. ROUTES OF ENTRY: Ingestion: Yes Inhalation: Yes Skin: Yes Eye: Yes INHALATION: Vapors and/or aerosols which may be formed at elevated temperature may be irritating to eyes and respiratory tract. No reported incidents of adverse health affects resulting from

inhalation of vapors at room temperature. INGESTION: No hazard expected in normal industrial use. Ingestion is not a likely route of exposure. SKIN: Prolonged or repeated skin contact can cause irritation. EYE: Substance may cause moderate eye irritation. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None identified. CARCINOGENICITY: IARC: No NTP: No OSHA: No REPRODUCTIVE TOXICITY: This product has not been evaluated for reproductive toxicity. SECTION 4 - FIRST AID MEASURES INHALATION: Remove patient to fresh air,if discomfort persists seek medical attention. INGESTION: Call poison control center immediately. Follow their specific instructions. Do not induce vomiting. SKIN: Wash with soap and water. Contact a physician if irritation develops or persists. EYE: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Seek medical attention. SECTION 5 - FIRE-FIGHTING MEASURES Flammability Class (OSHA) IIIB Flash Point: Not Applicable Explosive Range: Not Applicable EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, water spray, or ABC dry chemical when fighting fires involving this product. HAZARDOUS COMBUSTION PRODUCTS: Oxides of carbon. FIRE FIGHTING PROCEDURES: Wear a NIOSH approved self-contained breathing apparatus. SECTION 6 - ACCIDENTAL RELEASE MEASURES CONTAINMENT TECHNIQUES: Use inert absorbent to dike the spill. Keep away from drains.

CLEAN-UP: If possible pump liquid into an approved container or spread absorbent over spill and shovel product/absorbent mixture into an approved container. If product has dried scrape up and place in an approved container. SECTION 7 - HANDLING AND STORAGE HANDLING: Empty drums should be completely drained, properly bunged and promptly returned to a reconditoner, or properly disposed of. Use only in well ventilated area. STORAGE: Keep from freezing. Store at temperatures between 50 F and 90 F. PRECAUTIONARY STATEMENT: Keep out of the reach of children. SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION Occupational Exposure Limits ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL ENGINEERING CONTROLS: Use local exhaust as needed to maintain occupational exposure limits. OTHER: Facilities storing or utilizing any chemical should be equipped with an eyewash facility and a safety shower. RESPIRATORY PROTECTION: Where exposure limits may be exceeded select a NIOSH approved respirator with appropriate Protection Factor and cartridge for the specific contaminents. Follow requirements for respiratory protection in OSHA 1910.134. EYE PROTECTION: Chemical splash goggles (ANSI Z87.1 or approved equivalent). SKIN PROTECTION: Where skin contact can occur, wear impervious gloves. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Form: Liquid Appearance/Color: Yellow Odor: Mild Solubility (in water): Dispersible in water ph Value: 4.8 Boiling Range/Point: 210.øF Evaporation Rate: Slower than n-butyl Acetate % Volatile: 54.1% Specific Gravity: 1.10 VOC: 10.7 g/l

SECTION 10 - STABILITY AND REACTIVITY Stability: This product is stable Hazardous Polymerization: Hazardous polymerization will not occur CONDITIONS TO AVOID: None. INCOMPATIBLITY: Strong acids and bases. HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon may be released during combustion. SECTION 11 - TOXICOLOGICAL INFORMATION Acute and chronic health effects are not expected as long as good industrial hygeine and safety precautions are followed. SECTION 12 - ECOLOGICAL INFORMATION This formulation has not been tested for environmental effects. SECTION 13 - DISPOSAL CONSIDERATIONS WASTE DISPOSAL: Disposal of this product must comply with all applicable federal, state and local regulations. CONTAINER DISPOSAL: Disposal of this container should comply with all applicable federal, state and local regulations. SECTION 14 - TRANSPORT INFORMATION UN Number none UN Pack Group N/A UN Class Nonhaz ICAO/IATA Class Nonhazardous IMDG Class Nonhazardous Shipping Name Nonhazardous Packaging may not be approved for shipping by air. Please contact Franklin International for further information. SECTION 15 - REGULATORY INFORMATION TSCA (Toxic Substances Control Act Inventory): All components of this product are listed on the TSCA inventory except as exempted. PENNSYLVANIA: Non-hazardous components required to be listed at 3% or more: polyvinyl acetate emulsion 9003-20-7; polyvinyl alcohol 25213-24-5

NEW JERSEY: polyvinyl acetate emulsion 9003-20-7; water 7732-18-5; polyvinyl alcolhol 25213-24-5; petroleum hydrocarbon 64741-89-5; trade secret 80100233-5015p SECTION 16 - OTHER INFORMATION DISCLAIMER: While the information and recommendations set forth herein are believed to be accurate as of the data hereof, Franklin International makes no warranty, express or implied, with respect thereto and disclaims all liability from reliance thereon.