ANDREA SCORDI SALES MANAGER DANIELI CENTRO ALUMINIUM 4 TH IIAC IRAN INTERNATIONAL ALUMINIUM CONFERENCE OLYMPIC HOTEL TEHRAN, IRAN 11-12 MAY 2016 DANIELI CENTRO ALUMINIUM HOT ROLLING MILL TECHNOLOGY AMAG PROJECT This document contains proprietary information of Danieli & C. Officine Meccaniche S.p.A., not disclosable, not reproducible. All Rights Reserved.
PROJECT OVERVIEW HISTORY AMAG AG is a globally active manufacturer of high quality, rolled aluminium products which are used in high grade final products such as products for the aircraft and automotive industry. The importance of aluminium in all areas of modern, industrial production, transport and other applications is steadily rising. AMAG rolling has established a position as a specialist among the rolling mill companies and by means of constant improvements in already high quality standards, is able to provide products, which meet the strictest requirements.
PROJECT OVERVIEW AMAG 2014 PROJECT LARGE SCALE INVESTMENT IN RANSHOFEN 220 Million EURO are going to be invested in a new hot-rolling-mill, a new plate-centre, a new slab-casting and a distribution centre for finished products.
MECHANICAL EQUIPMENT TWIN-COILER HOT ROLLING MILL PROJECT Main Features of the project: > Type of plant Twin-coiler hot rolling mill > Productivity 320,000 tpy > Productivity target 80,000 tpy > Aluminium alloys from 1xxx to 8xxx > Plate and coil std production > Tread coil production > Plate and coil clad production Some applications of the ALU plates are: > Aerospace; > Automotive Industries; > Bright products; The new hot rolling mill, which produces both plates as well as coils, entered operation on schedule in September 2014. Best quality achieved especially with aluminium alloy of 2XXX, 6XXX and 7XXX series.
MECHANICAL EQUIPMENT GENERAL LAYOUT 1 3 5 7 2 4 6 430 m MAIN FEATURES 1. Ingots Reheating Furnace 2. Entry Coiler & Belt Wrapper 3. 4-HI Reversing Rolling Mill 4. Exit Coiler & Belt Wrapper and Side Trimmer 5. Coil Handling system 6. Plate Handling system 7. 160 mm Crop Shear 8. Danieli Automation L1 and L2 system
MECHANICAL EQUIPMENT TECHNOLOGICAL LAYOUT Reheating Furnace Nr.1 (Future) Reheating Furnace Nr.2 (Future) Reheating Furnace Nr.3 (Future) Reheating Furnace Nr.4 Entry Belt Wrapper Reversing Mill DSTS Exit Belt Wrapper PLATE Discharging 160mm Shear 60.97 21.0 21.0 21.0 35.27 9.73 8.0 5.25 41.22 15.0 18.20 178.29 168.97 13.25 252.71 434.93 PLANT PRODUCTION Hot Rolled Coils Hot Rolled Plates STARTING INGOTS Thickness Width Length Max Weight 400,000 tpy 280,000 tpy 120,000 tpy 270-620 mm cold-scalped 280-680 mm clad 1000-2300 mm 3.2-7.5 m 20.0 tons HOT ROLLED PLATES Thickness Width Length Max Weight HOT ROLLED COILS Thickness Width Coil ID-OD Max Weight 10-160 mm 1000-2450 mm 4-12.5 m 20.0 tons 3.0-16.0 mm 1000-2450 mm 600-2800 mm 20.0 tons
MECHANICAL EQUIPMENT 3D GENERAL LAYOUT ALUMINIUM SERIES from 1xxx to 8xxx and clad alloys
MECHANICAL EQUIPMENT FROM CASTING TO THE FINAL PRODUCT CAST INGOT YARD INGOT SAWING AND SCALPING INGOT REHEATING / THERMAL TREATMENT INGOT HOT ROLLING MILL TRANSFER BAR CROPPING HEAD & TAIL WITH THE HEAVY SHEAR
MECHANICAL EQUIPMENT FROM CASTING TO THE FINAL PRODUCT PLATE ROLLING UNTIL ACHIEVING THE THICKNESS FOR COILING PASSES PLATE ROLLING UNTIL ACHIEVING THE TARGET PLATE THICKNESS PLATE ROLLING UNTIL ACHIEVING THE THICKNESS FOR COILING PASSES STRIP PREPARATION WITH THE LIGHT SHEAR PLATE MARKING COILING PASSES UNTIL ACHIEVING THE THICKNESS OF THE SECOND LAST PASS HOT ROLLING COILING PASSES PLATE CUT TO LENGTH TO THE HEAVY SHEAR COIL DISCHARGE AND STORAGE TO THE HEATED WAREHOUSE COIL DISCHARGE PLATE DISCHARGING AND PILING TO THE STACKING UNIT FAST WORK ROLL CHANGING COIL TEMPERATURE MEASURAMENT COIL CHARGING ONE TREAD COILING PASS COIL DISCHARGE TEMPERATURE MEASURAMENT
MECHANICAL EQUIPMENT 4-HI REVERSING ROLLING MILL MAIN FEATURES > Top mounted electromechanical screwdown; > Top BUR Balance and WR Scratch Brushes; > Positive bending in Mae-west block; > Negative Bending; > Bottom mounted HAGC and Work Roll Coolant sprays; > Quick WR/BUR change; > Fume exhaust system; MAIN DATA Max coiling speed Max plate speed Max Separating Force Max Reduction Max Positive Bending Force Max Negative Bending Force WR Diameter max/min WR Barrel length BUR Diameter max/min BUR Barrel length Motor Power Motor Speed 300 mpm 135 mpm 50,000 kn 50.0 mm 5,000 kn 3,000 kn 950/865 mm 2600 mm 1600/1500 mm 2540 mm 2 x 5,000 kw 33/105 rpm
Duty Cycle, % MECHANICAL EQUIPMENT WORK ROLL SELECTIVE COOLING SYSTEM MAIN FEATURES > High speed pulse mode > Selective system > High profile control > Predictive Spray System Study 100 90 80 70 WORK ROLL COOLANT Reduced coolant application in edge regions (increase profile crown) 60 50 40 30 20 10 0 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 Zone
MECHANICAL EQUIPMENT WORK ROLL SELECTIVE COOLING SYSTEM MAIN FEATURES > High speed pulse mode > Selective system > High profile control > Predictive Spray System Study
MECHANICAL EQUIPMENT SIDE TRIMMER AND SCRAP CHOPPER MAIN FEATURES > Bases locked by hydraulic operated wedges; > Side trimming heads automatically adjusted for width, clearance and overlap; > Offset adjustment; MAIN DATA Max thickness trimmed Max width trimmed Strip width after trimming Knife diameter Max speed Motor power Motor speed 12.0 mm 100 mm 1000-2300 mm 610 mm 420 mpm 350 kw 750/1500 rpm
MECHANICAL EQUIPMENT TREAD COILS AND CLAD PLATES AND COILS MAIN FEATURES > Automatic coils charge system for tread coils > Peeler > Light preparation shear > Automatic functions for clad
MECHANICAL EQUIPMENT HEAVY SHEARS FEATURES MAIN FEATURES > Fully hydraulic up cut shear > Single rake > Adjustable Knife angle > Adjustable Knife gap > Quick knife change > Hydraulic side guides > Length, thickness and profile measurement > Scrap handling MAIN DATA Width 1000-2500 mm Maximum Cutting Force 20,000 kn Cutting thickness 10-160 mm Knife width Cutting angle α 2800 mm 1 α 3.5 Knife gap D 0.8 mm D 8 mm Most critical foreseen conditions for cutting: AA 5083 at width = 2450 mm and thickness = 160 mm at minimum cutting temperature of 350 C.
Pieces [%] Pieces [%] Plates [%] STATISTICAL DATA ANALYSIS PLATE PRODUCTION DISTRIBUTION 35% PLATE ALLOY DISTRIBUTION WIDTH DISTRIBUTION 30% 70% 25% 20% 15% 10% 5% 0% 2017A 5083 5086 5754 6061 6082 7050 7075 8079 Alloy 60% 50% 40% 25% CUT THICKNESS DISTRIBUTION 30% 20% 20% 15% 10% 10% 5% 0% 0-20 20-40 40-60 60-80 80-100 100-120 120-140 140-160 Cut thickness ranges [mm] 0% 1000-1500 1500-2000 2000-2500 Width range [mm]
Pieces [%] Pieces [%] Pieces [%] STATISTICAL DATA ANALYSIS PLATE PRODUCTION DISTRIBUTION 50% COIL ALLOY DISTRIBUTION WIDTH DISTRIBUTION 40% 60% 30% 20% 50% 10% 0% 1050A 5083 5086 5754 6016 6061 6082 7050 7075 Alloy 40% 30% 60% 50% COIL FINAL THICKNESS DISTRIBUTION 20% 40% 30% 20% 10% 10% 0% 3-4 4-6 6-8 8-12 Thickness range [mm] 0% 1000-1500 1500-2000 2000-2500 Width range [mm]
ELECTRICAL AND AUTOMATION EQUIPMENT AUTOMATION TECHNOLOGICAL PACKAGES TECHNOLOGICAL PACKAGE L2 Automation System (Process Control) High-Speed control platform and State-of-the-Art application SW L1 Automation System (Equipment Control) Standard Market Equipment for open, easy to integrate and scalable Automation and Electrical systems Measure Actuator High degree of integration with process and mechanical design Mechanical/Process Equipment
ELECTRICAL AND AUTOMATION EQUIPMENT DANIELI AUTOMATION CONTROL PULPIT
ELECTRICAL AND AUTOMATION EQUIPMENT AUTOMATION PROCESS CONTROL SYSTEM HIGHEST PRODUCT QUALITY TROUBLE-FREE OPERATION OF THE MILL FLEXIBILTY > Thickness > Profile > Flatness > Temperature > Material Properties > High Equipment Availabilty > High Throughput > Consistency of Mill > Setup and Operation > Schedule Free Rolling > Intuitive User Interface
SUMMARY PROJECT CHALLANGE > PROJECT INCLUDE TECHNOLOGICAL EQUIPMENT AND ERECTION WORKS > FULL DANIELI AUTOMATION L1 & L2 SYSTEM > DESIGN INCLUDE EMULSION SYSTEM > EQUIPMENT DESIGN WITH SPECIFIC REQUIREMENTS FROM CUSTOMER > EQUIPMENT DELIVERY IN 18-20 MONTHS > FIRST PLATE/COIL ROLLED IN 29 MONTH > FINAL ACCEPTANCE IN 39 MONTHS
ANDREA SCORDI SALES MANAGER DANIELI CENTRO ALUMINIUM 4 TH IIAC IRAN INTERNATIONAL ALUMINIUM CONFERENCE OLYMPIC HOTEL TEHRAN, IRAN 11-12 MAY 2016 DANIELI CENTRO ALUMINIUM HOT ROLLING MILL TECHNOLOGY AMAG PROJECT This document contains proprietary information of Danieli & C. Officine Meccaniche S.p.A., not disclosable, not reproducible. All Rights Reserved.