Flat Roofing Brochure Flat Roofing
Market Sectors Our flat roofing products have been used in a wide cross section of sectors for a range of building types. The sectors below give an indication of the variety of uses for our products. Private Housing Care Home, Stoke-on-Trent, UK Infrastructure Aerospace, Goodrich, UK Industrial Morrisons Distribution Centre, Bridgwater, Somerset, UK Retail Porsche Show Room, Chester, UK Retail Morrisons Supermarket, Salford, UK 2
Market Sectors Education Ysgol Bro Alun School, Wrexham, UK Offices The Crofts Office, Rotherham, UK Health One Centre, Hartlepool, UK Retail Tesco Supermarket, Batley, UK 3
Standing Seam Effect & Membrane Roof Kingspan Topdek KS1000 TD Sanvey Gate Apartments, Leicester, UK (with a standing seam aesthetic) Kingspan Topdek is a single component, factory pre-engineered roof deck, comprising a high performance single-ply PVC / TPE membrane with insulation and a trapezoidal steel deck, that can eliminate the need for valley-hip and boundary wall gutters. It is suitable for flat and pitched roofs above 1:80 (0.72º) after deflection, as well as curved roof applications with a convex curve (45m radius) and concave curve (50m radius). Features Profile: Fixing detail: Metal type: Application: Flat single-ply PVC / TPE membrane, with optional standing seam aesthetic Secret-fix appearance N/A Flat and pitched roofs above 1:80 (0.72º) after deflection, and curved roof with a convex curve (45m radius) and concave curve (50m radius) Lengths: From 1.5m to 16m* Cover width: 1000mm Environmental rating: Fire rating: compatibility: Type of membrane: May be Green Guide A+ rated, subject to project specific assessment LPCB, FM approved Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as dome, pyramid and atrium PVC (Polyvinyl Chloride) / TPE (Thermoplastic Elastomer) in 4 RAL colours * Please be aware that our trailers limit lengths to 11.8m. 4
Standing Seam Effect & Membrane Roof Kingspan Topdek KS1000 TD Captains Club Hotel, Bournemouth, UK KS1000 TD 60mm 1000mm Cover Width Core Thickness 38mm 200mm Specifications and Accreditations Reference Standard Environment Control Hygiene High Humidity Low LPCB Fire Rating KS1000 TD P P P P P FM Dimensions, Weight and Thermal Performance Core Thickness (mm) 34 71 91 100 120 Overall Thickness (mm) 72 109 129 138 158 U-value (W/m 2 K) 0.48 0.25 0.20 0.18 0.15 Weight (kg/m 2 ) 0.5mm Deck 9.0 10.5 11.3 11.7 12.5 The U-values have been calculated using the method required by the appropriate National Building Regulations. 5
BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF River House, London, UK (Image courtesy of IKO plc) BENCHMARK Envirodek is an insulated roof deck that has been specifically designed to support green and brown roof systems, for both intensive and extensive solutions. It can double span up to 6m and is compatible with a wide range of waterproofing and green roof systems. BENCHMARK By Kingspan is a member of the Green Roof Organisation (GRO). PRODUCT FEATURES Profile: Fixing detail: Metal type: Application: Flat roof deck Secret-fix appearance externally and visible fixings internally Steel Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius) Spans: Double spans of up to 6m can be achieved depending on load and roof type Lengths: From 1.8m to 16m Cover width: Environmental rating: 1000mm May be Green Guide A+ rated, subject to project specific assessment compatibility: Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria * Governed by the minimum pitch of the waterproofing layer used. ** Tested on 46mm BENCHMARK Envirodek only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. Please be aware that our trailers limit lengths to 11.8m. 6
BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF Bideford College, Devon, UK BENCHMARK ENVIRODEK 1000mm Cover Width Core Thickness 160mm 108mm PRODUCT SPECIFICATIONS AND ACCREDITATIONS Reference Standard Environment Control Hygiene High Humidity Low Fire Rating LPCB FM BENCHMARK Envirodek P P P P DIMENSIONS, WEIGHT AND THERMAL PERFORMANCE Core Thickness (mm) 66 102 126 Overall Thickness (mm) 174 210 234 U-value (W/m 2 K) 0.25 0.18 0.15 Weight (kg/m 2 ) 0.9mm Deck 20.4 21.8 22.8 The U-values have been calculated using the method required by the appropriate National Building Regulations. 7
BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE Wellingborough Pool, Northamptonshire, UK (Image courtesy of IPS Rubberfuse) BENCHMARK Topspan is an insulated roof deck combining a structural deck and metal top sheet in one product. The panels are suitable for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes. BENCHMARK Topspan provides a clear span capability of up to 8m and is faster to install than alternative built-up roof deck sytems. PRODUCT FEATURES Profile: Fixing detail: Metal type: Application: Flat roof deck Secret-fix appearance externally and visible fixings internally Steel Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius) Spans: Suitable for frame-to-frame spanning of up to 8m, depending on applied loads Lengths: From 1.8m to 16m Cover width: Environmental rating: Fire rating: 1000mm May be Green Guide A+ rated, subject to project specific assessment LPCB approved (66mm core only) compatibility: Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria * Governed by the minimum pitch of the waterproofing layer used. ** Tested on 46mm BENCHMARK Topspan only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. Please be aware that our trailers limit lengths to 11.8m. 8
BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE One Centre, Hartlepool, UK BENCHMARK TOPSPAN 1000mm Cover Width Core Thickness 160mm 108mm PRODUCT SPECIFICATIONS AND ACCREDITATIONS Reference Standard Environment Control Hygiene High Humidity Low Fire Rating LPCB FM BENCHMARK Topspan P P P P P DIMENSIONS, WEIGHT AND THERMAL PERFORMANCE Core Thickness (mm) 66 102 126 Overall Thickness (mm) 174 210 234 U-value (W/m 2 K) 0.25 0.18 0.15 Weight (kg/m 2 ) 0.9mm Deck 20.4 21.8 22.8 The U-values have been calculated using the method required by the appropriate National Building Regulations. 9
BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE St. John s Community Hospital, Enniscorthy, Ireland BENCHMARK Roofliner is an insulated roof panel that is ideal for standing seam finishes. The panels are specifically designed for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes. BENCHMARK Roofliner is available in a large range of thicknesses, achieving a U-value as low as 0.09W/m²K and has an attractive flat internal liner profile for aesthetics. PRODUCT FEATURES Profile: Fixing detail: Metal type: Application: Flat insulated roof panel Secret-fix appearance externally and visible fixings internally Steel Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex and concave curve** of 20m (600mm cover width) and 25m (1100mm cover width) Lengths: From 1.8m to 16.5m Cover width: Environmental rating: 600mm and 1100mm May be Green Guide A+ rated, subject to project specific assessment compatibility: Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria * Governed by the minimum pitch of the waterproofing layer used. ** Across the width (facet) of the panel, not along the length. Please be aware that our trailers limit lengths to 11.8m 10
BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE Motorway Service Station, Lusk, Ireland BENCHMARK ROOFLINER 600mm & 1100mm Cover Widths Core Thickness PRODUCT SPECIFICATIONS AND ACCREDITATIONS Reference Standard Environment Control Hygiene High Humidity Low Fire Rating LPCB FM BENCHMARK Roofliner P P P P DIMENSIONS, WEIGHT AND THERMAL PERFORMANCE Core Thickness (mm) 80 100 125 150 175 200 220 U-value (W/m 2 K) 0.25 0.20 0.16 0.14 0.12 0.10 0.09 Weight (kg/m 2 ) 13.6 14.4 15.4 16.4 17.4 18.4 19.1 The U-values have been calculated using the method required by the appropriate National Building Regulations. 11
Kingspan Limited Greenfield Business Park No. 2, Greenfield, Holywell, Flintshire, CH8 7GJ, UK t: +44 (0) 1352 716100 f: +44 (0) 1352 710161 www.kingspanpanels.co.uk Carrickmacross Road, Kingscourt, Co Cavan, Ireland t: +353 (0) 42 969 8500 f: +353 (0) 42 969 8572 www.kingspanpanels.ie For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof. 03/2015