METAL FILING GSA Price List

METAL FILING GSA Price List This price list is effective July 7, 2017 and supercedes all previously printed or electronically released versions. See page General Information page 2 How to Use this Price List page 2 How to Specify Our Products page 3 Terms and Conditions page 4 Asset Tag Locations page 5 Product Warranty page 6 Sustainability page 7 ANSI/BIFMA page 8 LF Series page 11 Statement of Line page 11 Overview page 12 Product Information page 13 Filing Capacities page 14 Pricing page 15 Fundamental page 21 Statement of Line page 21 Overview page 22 Product Information page 23 Filing Capacities page 24 Pricing page 25 Universal page 29 Paper Management page 29 Laminate File Tops page 30 Model Number Index page 31 Appendices Finishes and Materials page A1 GSA Terms & Conditions page B1

2-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. Page 11 30"W 36"W 42"W Overfiles See page 17 to specify 30"W 36"W 42"W Top is finished so the file can be used as a stand alone unit. Roll-out shelf with lift door (in applicable five-high models) replaces top drawer and adds 1" to overall height of the file. Accommodates standing binders up to 12"H. Built-in anti-rebound catch prevents drawer from accidentally rolling open. Heavy-gauge frame is reinforced at all corners and built into the front of the file so openings are always true and square. Counterweight kit, specified separately, is required for all individual freestanding units. Kits include counterweight and bracket, packaged individually. Four glides, standard, provide 3 4" adjustability and allow for sturdy, four-point loading. Page 12 3-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 30"W 36"W 42"W Storage Cabinets See page 17 to specify. 30"W 36"W 42"W 4-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. LF Series 30"W 36"W 42"W Bases See page 18 to specify. 30"W 36"W 42"W LF Series 5-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 30"W 36"W 42"W Counterweight Kits See page 19 to specify. Knockouts are standard for ganging side-by-side. Locking is standard. Select key random or key specific. Note: Lock cores must be specified separately for key specific option. Two 6"H half-height drawers may replace existing drawer in any position. Full ball-bearing drawer suspension allows both the drawer and suspension to extend together. Side-to-side file bar is standard; one per drawer. Front-to-back file bars are available separately for easy field installation. Label holder is standard; one per drawer. IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions. 5-High Lateral Files with Roll-Out Shelf and Lift Door See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 30"W 36"W 42"W Overfile/Storage Cabinet Shelves and Wardrobe Kits See page 19 to specify. Product Info See page 13 Filing Capacities page 14 Paper Management page 29 Drawer Pulls: Drawer pull is recessed along the full front edge. Page 13 LF Series Overview See page 12 Filing Capacities page 14 Paper Management page 29 Side-to-side legal or letter filing Locking is standard on lateral files, Details Connections Related Products can be accommodated by moving overfiles, and storage cabinets. Select the back file bar to the letter or legal key random or key specific. Knockouts are standard in all files Counterweight kit, specified separately, is required for all individual free- position and utilizing the drawer front Note: Lock cores must be specified and cabinets for ganging side-bysidestanding units. interior as a file bar. separately for key specific option. See page 9. See page 19. Front-to-back filing can be accommodated by ordering the appropriate Bases, in heights of 1 1 2", 2", 2 7 8", or in addition to any same-width LF Laminate file tops are available to Overfile can be used independently number of front-to-back file bars 3", and 4", are available for factory or Series file or storage cabinet. provide a continuous worksurface separately. field installation to adjust the overall over one or more files. Lateral file construction is ladder height of lateral files and storage See page 30. frame with coach seam welds, cabinets allowing files to be moved while fully See page 18. Paper management accessories loaded. Right angle bend of the are available. coach seam makes the strongest use Four adjustable glides are standard See page 29 of formed metal and presents a clean on lateral files and storage cabinets; exterior with no exposed welds. they provide 3 4" adjustability. Progressive slide suspension provides smooth drawer operation. Steel drawer interiors are Overfiles and storage cabinets pre-painted in cinder. feature hinged doors. Silencing bumpers ensure quiet IMPORTANT: Shelves and wardrobe drawer operation and are added to kits are specified separately for field suspension wherever a steel-to-steel installation. Shelves are adjustable at contact would otherwise be made. 1" increments. Letter, legal, or A4 filing is accommodated with conventional or hanging folders. See page 14 for filing capabilities. Dual-interlock system ensures only one drawer may be opened at a time. IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 19. Front-to-Back File Bars See the Perks Price List. Page 15 LF Series GSA SIN 711-3 D W H Model Price 2-High Lateral Files 18" 30" 25 3 4" LFF18302 $ 950 36" LFF18362 1079 42" LFF18422 1140 3-High Lateral Files 18" 30" 371 4" LFF18303 $ 1292 36" LFF18363 1500 42" LFF18423 1635 4-High Lateral Files 18" 30" 4811 16" LFF18304 $ 1641 36" LFF18364 1906 42" LFF18424 2124 5-High Lateral Files 18" 30" 601 8" LFF18305 $ 2039 36" LFF18365 2244 42" LFF18425 2458 5-High Lateral Files with Roll-Out Shelf and Lift Door 18" 30" 621 8" LFF18305LD $ 2124 36" LFF18365LD 2328 42" LFF18425LD 2544 Overview See page 12 Counterweight Kits page 19 Paper Management page 29 Standard Includes Standard-height drawers Lock: black One side-to-side file bar per drawer How to Specify KRB = Key random KSB = Key specific (-$23; X = No additional base 1.5 = 11 2"H (+$) 2 = 2"H (+$) 2.875 = 27 8"H (+$) 3 = 3"H (+$) 4 = 4"H (+$) See page 18 for pricing. Note: Factory-installed base option will incur an upcharge equivalent with the models STD = Group 1 Key: = Available color Solid Metallic CSP Price Group 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 M M M M M M LF Series Fundamental Arc Pulls Page A5 Finishes & Materials Metallic Paint: 10% upcharge applies for price group M metallic finishes, except on arc pulls. Note: Due to the reflective qualities of metallic paints, variations in color may occur. CSP: See page A6 for customerspecified paint. How to Use this Price List How to Specify See page 3 Terms & Conditions page 4 ANSI/BIFMA page 8 Kimball Office has made every effort to make this price list accurate and complete with all of the information you need to specify our products. We suggest that you become familiar with the format of this price list. You ll find information about the product line, planning guidelines, pricing, and how to specify the product. 26"H 29"H LF SERIES Metal Files and Cabinets 37"H 26"H 37"H 49"H 60"H 49"H 1 1 2"H 2"H 2 7 8"H 3"H 4"H Statement of Line 60"H 62"H Statement of Line provides a snapshot of the entire product line. We ve included an illustration, a table showing available sizes, and page cross references to the applicable pricing and how to specify pages. LF SERIES Metal Filing Files and Cabinets P Product Information Product Information pages provide detailed information about the product, connections that can be made with other models, planning factors, and applications guidelines. Finishes Finishes Materials & Paint 480 Antique White 427 Barley 437 Cement 403 Chamois 462 Cinder 440 Cloud 485 Dark Chocolate 405 Designer White 453 Environmental Grey 459 Featherstone 450 Fog 488 Frosty White 461 Graphite 445 Moon Beam 416 Putty 420 Sandstone 425 Shadow 465 Smoke 460 Storm 429 Tantalum 419 Wallaby 514 Carbon Metallic 507 Patina Metallic 501 Platinum Metallic 505 Satin Bronze Metallic 503 Satin Nickel Metallic 504 Taupe Metallic Customer Specified Look in the Finishes and Materials appendix to see what materials and finishes are available. Matrices for wood finishes, laminate, paint, fabrics, and other surface materials offer a quick reference by product. Matrix Dimensions provided in this price list are nominal. Products are manu factured to meet standard industry tolerances. Illustrations and specifications contained in this price list are based on the latest product information at time of publication. Kimball Office reserves the right to make changes at any time without notice. Items listed herein are considered by Kimball Office as portable furniture and as such are subject to local fire, electrical, and building codes applicable to portable furniture. LF SERIES Metal Filing Files and Cabinets O Overview Overviews offer a quick look at the distinguishing features of the product line. LF SERIES Metal Filing Lateral Files T With Standard-Height Drawers One drawer label per drawer Floor glides; adjustable to 3 4"! Model 2 Pull option: F = Full pull 3 Lock option: specify lock core separately) 4 Factory installed base option: available for field installation 5 Finish price group: STDM = Group M (+10%) 6 Finish designator Pricing pages list each model individually along with its list prices. How to Specify steps instruct you how to build a complete model that includes all of its options and materials. See page 3 for detailed information about how to specify Kimball Office products. Pricing Only Underwriters' Laboratory (U.L.) or Canadian Standards Association (C.S.A.) listed electrical components are used in electrical devices and are so labeled. The customer is responsible for the proper application of products to the local codes under which installation must be made. Further specifications are available on request. Page 2 General Information

How to Specify Our Products Terms & Conditions See page 4 Product Warranty page 6 ANSI/BIFMA page 8 Complete specifications are built by following a set of steps. These How to Specify steps are located in the far right column of each pricing page and are specific to the models found on that page. These steps will guide you in the proper order to specify the base model, materials, finishes, options, etc. Base model numbers may be comprised of two or more steps. For concise presentation, some models numbers have been truncated within the pricing table. The steps numbered using a solid circle with a white number inside (e.g.,!, @, or #) make up of the base model number. Steps numbered using an outlined circle with black number inside (e.g., 4, 7, or 9) are required to complete the specification. IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 19. Front-to-Back File Bars See the Perks Price List. Page 15 LF SERIES Lateral Files T Metal Filing With Standard-Height Drawers LF Series Pricing GSA SIN 711-3 D W H Model Price 2-High Lateral Files 18" 30" 25 3 4" LFF18302 $ 950 36" LFF18362 1079 42" LFF18422 1140 3-High Lateral Files 18" 30" 371 4" LFF18303 $ 1292 36" LFF18363 1500 42" LFF18423 1635 4-High Lateral Files 18" 30" 48 11 16" LFF18304 $ 1641 36" LFF18364 1906 42" LFF18424 2124 5-High Lateral Files 18" 30" 601 8" LFF18305 $ 2039 36" LFF18365 2244 42" LFF18425 2458 5-High Lateral Files with Roll-Out Shelf and Lift Door 18" 30" 62 1 8" LFF18305LD $ 2124 36" LFF18365LD 2328 42" LFF18425LD 2544 Overview See page 12 Counterweight Kits page 19 Paper Management page 29 Standard Includes Standard-height drawers Lock: black One side-to-side file bar per drawer One drawer label per drawer Floor glides; adjustable to 3 4" How to Specify! Model 2 Pull option: F = Full pull 3 Lock option: KRB = Key random KSB = Key specific (-$23; specify lock core separately) 4 Factory installed base option: X = No additional base 1.5 = 11 2"H (+$) 2 = 2"H (+$) 2.875 = 2 7 8"H (+$) 3 = 3"H (+$) 4 = 4"H (+$) See page 18 for pricing. Note: Factory-installed base option will incur an upcharge equivalent with the models available for field installation 5 Finish price group: STD = Group 1 STDM = Group M (+10%) 6 Finish designator Sample Specification: The example below shows a complete model number for a 5-high LF Series lateral file. See page 15 for the corresponding pricing table and How to Specify steps. LFF18365 F KRB 2 STD 480 Base Model Refer to the standard includes list to see what ships standard as part of the base model. Follow these steps to build a complete model specification. Options that incur an upcharge or decrease the base price are noted within the How to Specify steps. Pricing Table Abbreviations: D W H T = Depth = Width = Height = Thickness AO = Approach Overhang ED = End Depth KW = Kneespace Width KH = Kneespace Height WC = Worksurface Clearance Electronic Catalog and Specification Software: Kimball Office promotes the use of electronic drawing and specification tools to automate the furniture sales, design, and specification process. We provide our symbol and product info r mation to industry leading design and specification software companies. We work closely with 20-20 Technologies Inc. to develop additional automation routines for our products; these are available in CAP and Giza software tools. We also partner with KISP and all of our products are available in The KITS collaborator. As noted in our Terms and Conditions, the customer bears the responsibility for order correctness. Page 3 General Information

Finishes & Materials Ordering Procedures: Purchase orders must be received with complete information, which includes the following: Complete/valid model numbers All textiles, finish, and material specifications for each line item. Ship to address and contact Special shipping instructions (tagging, requested dates, etc.) Billing address Net prices Submit orders electronically via EDI or OrderXchange. To order literature or check order status on-line, please visit us at www.kimballoffice.com. The customer bears sole responsibility for order correctness. Orders are accepted only by issuance of Kimball Office s formal order confirmation and are subject to the terms and conditions set forth herein, notwithstanding any variance in terms and conditions set forth on buyer's order forms. The order confirmation is the final agreement between the customer and Kimball Office and supersedes all prior oral, written or electronically transmitted statements regarding the order. Kimball Office will attempt to meet all requested ship or delivery dates. If no specific date is requested, we will assign the best possible ship date available. Terms and Conditions Changes and Cancellations: A confirmed order may not be changed or cancelled, in whole or in part, without prior written consent of Kimball Office. Expenses incurred because of the changes shall be charged to the Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation charges established by Kimball Office. Changes may affect delivery dates. No changes or cancellations will be accepted after order entry for nonstandard lead time products including: Kwik Office offerings Engineer-to-Order (modified or non-standard products) Alliance program upholstery Customer s Own Material (COM) Customer s Own Leather (COL) Customer Specified Laminate (CSL) Customer Specified Paint (CSP) Mock Ups Service Parts/Replacements Modified Product: Our manufacturing flexibility allows us to accommodate requests for noncataloged product. We are happy to discuss your unique product requirements and determine feasibility and pricing. Contact By Design for assistance at 800.482.1616 extension 6002. Finishes and Materials: Wood Finish Color Matching Each piece of natural veneer offers unique texture and grain. Minor variations in finish color and value may occur due to the natural characteristics of wood. Kimball Office carefully selects all materials used in every product ensuring a commercially acceptable color and finish. Factors such as aging and exposure to light alter finishes. Fabric Color Matching Kimball Office will always ship a satisfactory commercial match on fabric. Because of industry dye-lot variation, colors may not match exactly. Terms and Pricing: Net 30 days. If the invoice amount is not paid in full within the terms of the invoice, the invoice may be subject to a monthly finance charge equal to the lesser of 1.5% or the highest amount permitted by law. List prices include freight charges; however, they do not include: Storage and insurance charges Sales and other taxes Local delivery, unloading, or installation These items will be invoiced as separate line items. All prices herein are delivered list price, unless noted, effective December 1, 2016, and supersede all other published prices. Prices shown cover standard product only, additional charges will be applied for changes to standard product. Kimball Office reserves the right to change prices without prior notice. Prices herein are only for shipment within the continental United States or Canada. Selling Information Distribution of this price list does not in itself constitute an offer to sell. Orders can be received only from authorized Kimball Office customers. Kimball Office price lists and catalogs are not available to the general public. Product Design: Kimball Office reserves the right to make changes in design, specifications, and construction or discontinue products without prior notice. Shipping/Freight: Products are priced and will be delivered C.P.T. one contiguous U.S. destination, one Canadian destination or one port of exit, freight prepaid (Incoterms 2010). Title shall transfer with risk of loss. Kimball Office reserves the right to select the most appropriate shipping terms. How to Specify See page 3 Product Warranty page 6 ANSI/BIFMA page 8 Contact Information: Kimball Office 1600 Royal Street Jasper, Indiana 47549 800.482.1818 812.482.8300 (fax) Government Sales Customer Service 800.647.2010 Page 4 General Information

Terms and Conditions continued How to Specify See page 3 Product Warranty page 6 ANSI/BIFMA page 8 Delivery: Normal delivery hours are 8:00 a.m. to 5:00 p.m. Monday through Thursday and 8:00 a.m. to 3:00 p.m. on Friday. Any delivery arrangements made out side of normal delivery times are subject to additional charges. See at right. Any charges incurred because of failure to receive a shipment or offload a shipment in a timely manner (maximum time allowed to offload trailer: 3 hours), will be billed to the sold-to customer. Any charges as a result of rerouting a shipment while in transit will be billed to the sold-to customer. Any order requiring Special Delivery Service will incur additional charges. All such requirements must be noted on the purchase order. These are services that are not included in the standard price of the product or require the usage of specialized carriers. These services include: Weekend delivery (after 3:00 p.m. Friday through Sunday evening) minimum $500 charge. Inside delivery minimum $50 charge. Note: Must be approved and co ordinated 10 days prior to shipment. Non-dock delivery minimum $50 charge. JIT delivery (specific day and/or time) Orders under $25,000 list will incur a $125 charge. Rush delivery (1-3 days from ship date) Contact Customer Service for charges. Carrier Selection Kimball Office reserves the right to select the most appropriate mode of shipment. Kimball Office relinquishes all responsibility for goods shipped upon a clean receipt from the carrier. Customer bears the risk of loss or damage during shipment. Packaging Kimball Office's standard method of shipping is to carton all items. Certain full truck load shipments may qualify for special consideration. Contact Kimball Office for guidelines. International shipments can be crated at the customer's request. The expense of crating will be the responsibility of the customer. Palletizing Kimball Office may elect to palletize key products on projects when it effectively reduces carton waste and improves stability within the shipment. Loss, Damage, or Delay Kimball Office shall not be liable for loss, damage, detention or delay resulting from causes beyond its reasonable control including but not limited to fire, strike, weather, wreck or delay in transporta tion. In the event of delay due to any such cause, the delivery date will be postponed by such length of time as may be reasonably necessary to compensate for the delay. Storage If the customer requests a change of ship date and the product is in production, Kimball Office reserves the right to transfer the product to storage at the customer s risk and expense. All requests to store product must be approved by Kimball Office Customer Service and may be subject to storage fees. Such transfer to storage will be deemed delivery to the customer for all purposes including insurance, liabilities, invoicing, and payment. Returned Merchandise Merchandise will only be accepted for return under the following conditions: 1 The product is a made to stock item; and 2 Return Goods Authorization (RGA) is given to you by your Customer Service Team. All returns are subject to a 50% restocking fee. All freight charges for returned product are the responsibility of the customer. Unauthorized returns will not be accepted and will be returned freight collect. All merchandise being returned must be properly packed and protected in the original cartons. Upon receipt, all returned merchandise will be thoroughly inspected. Any discre pancies, such as additional damage, signs of usage, missing parts, etc., will result in an adjustment to the amount of credit issued. Claim Process: All products produced by Kimball Office are carefully inspected and properly cartoned prior to shipment. All shipments are delivered to the transportation company in good condition. If you receive a shipment that has damage, product shortages, or delivery has been delayed by the transportation carrier, the following steps must be taken: 1 Before signing for the merchandise, make notation of all visible damage, shortages and/or time of truck arrival on the bill of lading. 2 Contact Customer Service within 15 calendar days of delivery receipt to report issue. We will advise whether a freight claim will need to be filed based on mode of transportation. 3 If claim must be filed, carrier must be contacted within 15 calendar days of delivery. Retain all shipping cartons for inspection by the carrier agent. 4 A copy of the Carrier Disposition Letter must be sent to Customer Service to receive additional credit on concealed damage issues via Redistribution/ LTL carrier shipments. For Concealed Damage, follow steps 2 through 4. Asset Tag Locations: Bar code labels have been placed on most Kimball Office products. Products with pedestals or lateral files Underside of top drawer near front edge in right pedestal (if no right pedestal, left pedestal). Highback organizers and overhead cabinets Back left of task light facade. Bookcases Underside of lowest shelf (not bottom panel) on the left front edge. If glass shelves, top panel in cornice area. Vertical storage cabinets Underside of top drawer near front edge. If no drawers, underside of lowest shelf on left front edge. Desks, bridges, corner units, and worksurfaces Underside of the top surface (user s side) on the front edge. Component modesty panels Center top of the panel on the inside (kneespace area). Tables Underside of table top near the outside edge. Page 5 General Information

Product Warranty Lifetime Assurance of Quality How to Specify See page 3 Terms & Conditions page 4 ANSI/BIFMA page 8 Our Pledge: Kimball Office stands behind the craftsmanship of our products. When brought to our attention, we will address warranty issues quickly and effectively. Recommendations: Facilities managers and users are urged to make periodic inspections to look for signs of structural fatigue, damage or potential failure that may occur as a result of daily handling and use. Inspections should include the structural joints, corner blocks, screws or fasteners, welds, and any other points of stress. If any problems are found, the product should be taken out of service and Kimball Office Customer Service should be con - tacted promptly at 800-482-1818. Limited Product Warranty: Kimball Office warrants that its products are free from defects in materials and workmanship given normal use and care for a lifetime of single-shift service. Normal use is defined as the equivalent of a single shift, 40-hour work week. Exception: Itsa and Campos seating models are warranted for three-shift (24/7) service. Wish seating, excluding Wish Classic, is warranted for threeshift (24/7) service and up to 400 lb. user weight. Exception: Some products and parts have limited warranty periods. See lists at right. Page 6 At its option, Kimball Office will repair or replace with comparable product, free of charge to the customer, any product, part or component manu factured and/or sold by Kimball Office in North America after November 6, 2000, which fails under normal use as a result of such defect. In the event that use of a product exceeds normal use as defined above, the warranty period for such product will be reduced to 12 years from date of manufacture, and the warranty for the product s compo - nents that fall under different warranty limitations, as listed at right, will be reduced to one-third of the original warranty. This warranty is made by Kimball Office to the original customer for as long as the original customer owns and uses the product. This warranty is only valid if the products are given normal and proper use, and installed or used in accordance with Kimball Office installation and/or application guidelines, and installed by an authorized Kimball Office dealer or agent. Kimball Office assumes no responsibility for repairs to products sustaining damages resulting from user modification, attachments to a product, misuse, abuse, alteration, or negligent use of our products. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THERE ARE NO OTHER WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MER- CHANTABILITY OR FITNESS FOR ANY General Information PARTICULAR PURPOSE. WE EXCLUDE AND WILL NOT PAY CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES UNDER THIS WARRANTY. All warranties run from date of manufacture. Warranty Periods: Warranty periods are limited for certain products and/or component parts as follows: 10-Year Warranty Bingo side chairs and stools Poly seating Seating mechanisms Veneers Laminate Pneumatic lifts (cylinder assembly) 5-Year Warranty High-wear parts (such as casters, glides, drawer slides, moving chair arms) Xsede height-adjust base mechanism and electrical control box Electrical/power products Inflatable lumbar supports Lighting Desk sets Monitor arms Keyboard kits Covering materials (such as foam, most textiles, 3D laminate, and decorative trim) Marker Boards 3-Year Warranty Wool felt Custom products Carnegie fabrics Itsa mesh Campos mesh Wish mesh 1-Year Warranty Jolt Warranty Exclusions: This warranty does not cover: The substitution of non-kimball Office components for use in place of Kimball Office components Naturally occurring variations and differences in grain character and color between and within wood species Natural variations in marble and leather Damage caused by a freight carrier Normal wear and tear arising from product use Damage resulting from improper use or storage of the product C.O.M. (Customer's Own Material) or any other non-standard material specified by the customer, including attributes such as appearance, durability, quality, performance, colorfastness, etc. Alliance program fabrics Fabric, leather, and felt fading and wear, discoloration from contact with liquids or change in color or texture caused by application of finishes (flame proofing, stain resistance) Alterations to the product not expressly authorized by Kimball Office Products considered to be of consumable nature (such as bulbs, light ballast, and certain electronic products) Process for Warranty Issues: 1 A customer should contact his or her dealer, who will contact Customer Service at 800-482-1818. The purchase order or acknowledgement number, model number, and a detailed description of the warranty issue should be provided. Serial numbers may be required before the claim can be processed. 2 Customer Service will determine and pre-approve all resolutions to the claim, such as replacement units, service parts, and labor charges related to repair or redelivery of damaged or defective product. 3 Upon approval, a Case Number and resolution will be assigned to an authorized dealer, and all parts and components necessary for the repair/replace will be sent to the authorized dealer, which will carry out the resolution. The dealer should include the Case Number on all invoices for reimbursement once the warranty repair/replace has been completed. Kimball Office shall not be responsible for any unauthorized expenses. Kimball Office will only accept dealer invoices submitted within 90 days of the final approval by Customer Service; invoices received after 90 days will not be approved for dealer credit or payment. All warranty information should be sent to: Kimball Office ATTN: Customer Service 1600 Royal Street Jasper, Indiana 47549 Telephone: 800.482.1818 800.647.2010 (Gov t Sales)

Sustainability Enhancing the Home We All Share How to Specify See page 3 Terms & Conditions page 4 ANSI/BIFMA page 8 At Kimball Office, we are proud of our environmental stewardship. We are committed to sustainable business practices and continuous improvement. It s part of our heritage to stake initiative, to reduce waste, to conserve energy, to commit fully, and to lead by example. Throughout our more than 40 years of documented environmental actions, we have been a responsible steward of resources and have acted as an agent of sustainable change in our industry. Design for the Environment is our approach to product development to ensure the inherent sustainability of our offerings. By considering a full continuum of environmental factors, we have greatly improved the life cycle performance of our furniture. Ultimately, the more we do in the area of sustainability, the more it helps you to achieve your environmental aims. Let us show you just how easy it is with Kimball Office. ANSI/BIFMA level We offer one of the most sustainable portfolios in the industry, which includes systems, casegoods, tables, and seating. Through this free online tool, you have 24/7 access to the environmental attributes of our products. EcoScorecard enables speed and accuracy in the calculation of environmental credits for LEED, saving you time and ultimately, money. See how easy it is at kimballoffice.ecoscorecard.com. LEED Certification Kimball Office offers furniture solutions which may contribute toward LEED certification. The LEED Green Building Rating System is the nationally accepted benchmark for design, construction, and operation of high performance green buildings. Kimball Office has sought and received LEED certification for several of its facilities across the country. LEED-CI Gold: San Francisco, CA showroom LEED-CI Silver: Atlanta, GA showroom Chicago, IL showroom LEED-CI: Corporate Headquarters New York, NY showroom R&D Team Rooms Indoor Air Quality One of the largest contributions office furniture can make to a building s LEED certification is indoor air quality via low-emitting products. Kimball Office tests and certifies many of our products to the ANSI/BIFMA e3 2014 standard credits (7.6.1, 7.6.2, 7.6.3). Find more specific details regarding the environmental aspects of our product offerings at: www.kimballoffice.com Page 7 General Information

ANSI/BIFMA Operating Load Capacities How to Specify See page 3 Terms & Conditions page 4 Product Warranty page 6 The operating load capacities for various Kimball Office products shown in the table at right represent the BIFMA functional loads which are equivalent to loads that can be expected in normal use of the component. All components meet or exceed the following ANSI/BIFMA Functional and Proof Loading requirement tests: X5.6 2015 Panel Systems X5.5. 2014 Desk/Table Products Test X5.9 2012 Storage Units Test Component Operating Load Capacity (Functional Loads) Examples Worksurface 200 lbs. over 12" diameter area, concentrated loading; 24"D x 72"W = 288 lbs. total weight 1.5 lbs. per inch of perimeter, distributive loading (t.w.) Transaction counter.017 lb. per cubic inch above surface (not to exceed 12"H), distributive loading 12"D x 60"W = 147 lbs. t.w. Round and rectangular tables 1.5 lb. per inch of perimeter, distributive loading 36" dia. = 170 lbs. t.w. 36"D x 60"W = 288 lbs. t.w. Pedestal drawer.017 lb. per cubic inch of drawer interior filing space 24"D x 18"W x 12"H wood = (hanging load on file hangers) 88 lbs. t.w. 24"D x 15"W x 12"H metal = 73 lbs. t.w. Pedestal shelves.017 lb. per cubic inch above surface (not to exceed 12"H), distributive loading 22"D x 30"W = 134 lbs. t.w Flipper door cabinet Top shelf NO load Bottom shelf.017 lb. per cubic inch above surface (not to exceed 12"H), 36"W x 16"H metal = 117 lbs. t.w. distributive loading* 36"W x 19"H wood = 140 lbs. t.w. Open and enclosed shelves.017 lb. per cubic inch above surface (not to exceed 12"H), distributive loading 36"W x 8"H metal = 59 lbs. t.w. 36"W x 19"H wood = 140 lbs. t.w. Lateral file drawers.017 lb. per cubic inch of drawer interior filing space 30"W x 18"D x 12"H metal = (hanging load on file hangers) 110 lbs. t.w. 30"W x 24"D x 12"H wood = 147 lbs. t.w. Bookcase and wardrobe shelves.017 lb. per cubic inch above surface (not to exceed 12"H), distributive loading 36"W x 8"D metal = 59 lbs. t.w. 36"W x 12"D wood = 88 lbs. t.w. Cubic inches should be calculated using this formula: Surface length x surface depth x height of available storage above the surface (limited to 12 inches above the surface) Page 8 General Information

Locking Information GSA SIN 711-1 How to Specify See page 3 Terms & Conditions page 4 Product Warranty page 6 ANSI/BIFMA page 8 Locking units can be specified as: Key random with a black lock core and black hinged key (KRB); or Key specific (KS) Black lock cores with black hinged keys are identical to the ones used with other casegoods and systems products. Key Random Option: When key random option is selected, key numbers will be assigned arbitrarily at the factory with key numbers ranging from KSCD001 to KSCD300. Randomly numbered lock core(s) will ship standard along with your order for field installation. KSCD001 KSCD101 KSCD025 Key Specific Option: When key specific option is selected, the storage unit will be pre-drilled to accept a lock core; however, no lock cores will be shipped standard with the unit. If lock cores are standard on the unit, the price of the unit is reduced by the price of the lock core or cores. You must specify lock core(s) separately for key specific option; specify any key number from KSCD001 to KSCD300. Standard key that ships with the lock core can be used for the initial installation of the lock core in the field. Change key model KCCB1CK allows removal of lock cores for key numbers ranging from KSCD001 to KSCD300. IMPORTANT: A change key, specified separately, is required to remove lock cores in the field. Master key model KC2GMK will unlock any lock with key numbers ranging from KSCD001 to KSCD300. Model/Key Range Price Black Lock Core with Black Hinged Key KSCD001 to KSCD300 $ 24 Change Key KCCB1CK $ 8 Master Key KC2GMK $ 14 KSCD001 KSCD223 KSCD005 KSCD005 How to Specify! Specify exact key number for lock cores as the model number or model number for change or master key KSCD001 KSCD198 With random keying, different furniture units may or may not have the same key number. If you must have all locks keyed differently or all locks keyed the same, choose the key specific option. KSCD005 To key all the furniture units in a work - station or department alike, choose the key specific option and order the quantity of locks needed for your installation. Page 9 General Information

Notes How to Specify See page 3 Terms & Conditions page 4 Product Warranty page 6 ANSI/BIFMA page 8 Page 10 General Information

LF SERIES Metal Files and Cabinets Statement of Line IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions. 2-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 3-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 4-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 5-High Lateral Files See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 5-High Lateral Files with Roll-Out Shelf and Lift Door See page 15 to specify with standard-height drawers. See page 16 to specify with half-height drawers. 30"W 36"W 42"W 26"H 30"W 36"W 42"W 37"H 30"W 36"W 42"W 49"H 30"W 36"W 42"W 60"H 30"W 36"W 42"W 62"H Overfiles See page 17 to specify 30"W 36"W 42"W 29"H Storage Cabinets See page 17 to specify. 30"W 36"W 42"W 26"H 37"H 49"H 60"H Bases See page 18 to specify. 30"W 36"W 42"W 1 1 2"H 2"H 2 7 8"H 3"H 4"H Counterweight Kits See page 19 to specify. Overfile/Storage Cabinet Shelves and Wardrobe Kits See page 19 to specify. Page 11 LF Series

LF SERIES Metal Filing Files and Cabinets O Overview Product Info See page 13 Filing Capacities page 14 Paper Management page 29 Top is finished so the file can be used as a stand alone unit. Knockouts are standard for ganging side-by-side. Drawer Pulls: Roll-out shelf with lift door (in applicable five-high models) replaces top drawer and adds 1" to overall height of the file. Accommodates standing binders up to 12"H. Locking is standard. Select key random or key specific. Note: Lock cores must be specified separately for key specific option. Full pull Built-in anti-rebound catch prevents drawer from accidentally rolling open. Two 6"H half-height drawers may replace existing drawer in any position. Heavy-gauge frame is reinforced at all corners and built into the front of the file so openings are always true and square. Full ball-bearing drawer suspension allows both the drawer and suspension to extend together. Counterweight kit, specified separately, is required for all individual freestanding units. Kits include counterweight and bracket, packaged individually. Side-to-side file bar is standard; one per drawer. Four glides, standard, provide 3 4" adjustability and allow for sturdy, four-point loading. Front-to-back file bars are available separately for easy field installation. Label holder is standard; one per drawer. Page 12 LF Series

LF SERIES Metal Filing Files and Cabinets P Product Information Overview See page 12 Filing Capacities page 14 Paper Management page 29 Details Lateral file construction is ladder frame with coach seam welds, allowing files to be moved while fully loaded. Right angle bend of the coach seam makes the strongest use of formed metal and presents a clean exterior with no exposed welds. Side-to-side legal or letter filing can be accommodated by moving the back file bar to the letter or legal position and utilizing the drawer front interior as a file bar. Front-to-back filing can be accommodated by ordering the appropriate number of front-to-back file bars separately. Locking is standard on lateral files, overfiles, and storage cabinets. Select key random or key specific. Note: Lock cores must be specified separately for key specific option. See page 9. Bases, in heights of 1 1 2", 2", 2 7 8", 3", and 4", are available for factory or field installation to adjust the overall height of lateral files and storage cabinets See page 18. Four adjustable glides are standard on lateral files and storage cabinets; they provide 3 4" adjustability. Connections Knockouts are standard in all files and cabinets for ganging side-byside. Overfile can be used independently or in addition to any same-width LF Series file or storage cabinet. Related Products Counterweight kit, specified separately, is required for all individual freestanding units. See page 19. Laminate file tops are available to provide a continuous worksurface over one or more files. See page 30. Paper management accessories are available. See page 29 Progressive slide suspension provides smooth drawer operation. Steel drawer interiors are pre-painted in cinder. Overfiles and storage cabinets feature hinged doors. Silencing bumpers ensure quiet drawer operation and are added to suspension wherever a steel-to-steel contact would otherwise be made. IMPORTANT: Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 1" increments. Letter, legal, or A4 filing is accommodated with conventional or hanging folders. See page 14 for filing capabilities. Dual-interlock system ensures only one drawer may be opened at a time. Page 13 LF Series

LF SERIES Metal Filing Filing Capacities Application Guidelines Overview See page 12 Product Information page 13 Paper Management page 29 Inside Inside Description Depth Width Height Filing Inches and Arrangements 18"D x 30"W lateral 14 7 8" 26 7 8" 9 3 8" Filing Hardware: Heavier lines in the illustrations at right indicate filing hardware. 18"D x 36"W lateral 14 7 8" 32 7 8" 9 3 8" 29 5 8" letter 25 1 4" legal 26 13 16" letter 26 13 16" legal Front-to-back file bars (2) Front-to-back file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) 29 5 8" letter 29 5 8" legal 32 13 16" letter 32 13 16" legal Front-to-back file bars (2) Front-to-back file bars (2) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Front-to-back file bars can be specified separately. See the Perks Price List. Side-to-side file bar is standard; one per drawer. Drawer divider can be specified separately. See page 29. 18"D x 42"W lateral 14 7 8" 38 7 8" 9 3 8" 44 7 16" letter 35 5 8" legal 38 13 16" letter 38 13 16" legal Front-to-back file bars (2) Front-to-back file bars (2) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Side-to-side file bar (1) Page 14 LF Series

LF SERIES Metal Filing Lateral Files T With Standard-Height Drawers Pricing GSA SIN 711-3 Overview See page 12 Counterweight Kits page 19 Paper Management page 29 D W H Model Price 2-High Lateral Files 18" 30" 25 3 4" LFF18302 $ 977 36" LFF18362 1110 42" LFF18422 1172 3-High Lateral Files 18" 30" 37 1 4" LFF18303 $ 1329 36" LFF18363 1543 42" LFF18423 1682 4-High Lateral Files 18" 30" 48 11 16" LFF18304 $ 1688 36" LFF18364 1960 42" LFF18424 2185 5-High Lateral Files 18" 30" 60 1 8" LFF18305 $ 2097 36" LFF18365 2308 42" LFF18425 2528 5-High Lateral Files with Roll-Out Shelf and Lift Door 18" 30" 62 1 8" LFF18305LD $ 2185 36" LFF18365LD 2394 42" LFF18425LD 2617 Standard Includes Standard-height drawers Lock: black One side-to-side file bar per drawer One drawer label per drawer Floor glides; adjustable to 3 4" How to Specify! Model 2 Pull option: F = Full pull 3 Lock option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 4 Factory installed base option: X = No additional base 1.5 = 1 1 2"H (+$) 2 = 2"H (+$) 2.875 = 2 7 8"H (+$) 3 = 3"H (+$) 4 = 4"H (+$) See page 18 for pricing. Note: Factory-installed base option will incur an upcharge equivalent with the models available for field installation 5 Finish price group: STD = Group 1 STDM = Group M (+10%) 6 Finish designator IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 19. Front-to-Back File Bars See the Perks Price List. Page 15 LF Series

LF SERIES Metal Filing Lateral Files T With Half-Height Drawers Option Pricing GSA SIN 711-3 Overview See page 12 Counterweight Kits page 19 Paper Management page 29 IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 19. Factory-installed base option, if selected, will incur an upcharge equivalent with the models available for field installation. Front-to-Back File Bars See the Perks Price List. Page 16 STD HH2 HH3 STD STD HH2 HH3 STD STD D W H Model Price 2-High Lateral Files 18" 30" 25 3 4" LFF18302H $ 977 36" LFF18362H 1110 42" LFF18422H 1172 3-High Lateral Files 18" 30" 37 1 4" LFF18303H $ 1329 36" LFF18363H 1543 42" LFF18423H 1682 4-High Lateral Files 18" 30" 48 11 16" LFF18304H $ 1688 36" LFF18364H 1960 42" LFF18424H 2185 5-High Lateral Files 18" 30" 60 1 8" LFF18305H $ 2097 36" LFF18365H 2308 42" LFF18425H 2528 5-High Lateral Files with Roll-Out Shelf and Lift Door 18" 30" 62 1 8" LFF18305LDH $ 2185 36" LFF18365LDH 2394 42" LFF18425LDH 2617 LF Series Standard Includes See previous page. How to Specify! Model 2 Pull option: F = Full pull 3 Lock option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 4 1 st drawer position from top: HH1 = Two half-height drawers (+$317 for set of 2) STD = Standard-height drawer 5 2 nd drawer position from top: HH2 = Two half-height drawers (+$317 for set of 2) STD = Standard-height drawer 6 3 rd drawer position from top (omit for 2-high): HH3 = Two half-height drawers (+$317 for set of 2) STD = Standard-height drawer 7 4 th drawer position from top (omit for 2- or 3-high): HH4 = Two half-height drawers (+$317 for set of 2) STD = Standard-height drawer 8 5 th drawer position from top (omit for 2-, 3-, and 4-high): HH5 = Two half-height drawers (+$317 for set of 2) STD = Standard-height drawer 8 Factory-installed base height: X = No additional base 1.5 = 1 1 2"H (+$) 2 = 2"H (+$) 2.875 = 2 7 8"H (+$) 3 = 3"H (+$) 4 = 4"H (+$) See page 18 for pricing. 9 Finish price group: STD = 1 STDM = M (+10%) bl Finish designator

LF SERIES Metal Filing Overfiles and Storage Cabinets O Pricing GSA SIN 711-3 Overview See page 12 Shelves page 19 Wardrobe Kits page 19 D W H Model Price Overfiles 18" 30" 29 1 4" LFF1830OF $ 902 36" LFF1836OF 947 42" LFF1842OF 1025 Storage Cabinets 2 High 18" 30" 25 3 4" LFF18302SC $ 1056 36" LFF18362SC 1117 3 High 18" 30" 37 1 4" LFF18303SC $ 1117 36" LFF18363SC 1171 4 High 18" 30" 48 11 16" LFF18304SC $ 1171 36" LFF18364SC 1238 5 High 18" 30" 60 1 8" LFF18305SC $ 1236 36" LFF18365SC 1311 Standard Includes Lock: black Floor glides on storage cabinets; adjustable to 3 4" How to Specify! Model 2 Pull option: F = Full pull 3 Lock option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 4 Factory installed base option: X = No additional base 1.5 = 1 1 2"H (+$) 2 = 2"H (+$) 2.875 = 2 7 8"H (+$) 3 = 3"H (+$) 4 = 4"H (+$) See page 18 for pricing. 5 Finish price group: STD = Group 1 STDM = Group M (+10%) 6 Finish designator IMPORTANT: Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 1" increments. See page 19. Factory-installed base option, if selected, will incur an upcharge equivalent with the models available for field installation Laminate File Tops See page 30. Page 17 LF Series

LF SERIES Metal Filing Bases For Field Installation on Lateral Files or Storage Cabinets Pricing GSA SIN 711-3 Overview See page 12 Shelves page 19 Wardrobe Kits page 19 Height without glide Overall height Height D W H without Glide Model Price 30"W Bases 18" 30" 1 1 2" 1 1 4" LFFB1830 $121 2" 1 3 4" 122 2 7 8" 2 5 8" 142 3" 2 3 4" 142 4" 3 3 4" 159 36"W Bases 18" 36" 1 1 2" 1 1 4" LFFB1836 $129 2" 1 3 4" 130 2 7 8" 2 5 8" 151 3" 2 3 4" 151 4" 3 3 4" 169 Standard Includes Four floor glides; adjustable to 3 4" How to Specify! Model 2 Base height: 1.5 = 1 1 2"H 2 = 2"H 2.875 = 2 7 8"H 3 = 3"H 4 = 4"H 3 Finish price group: STD = Group 1 STDM = Group M (+10%) 4 Finish designator 42"W Bases 18" 42" 1 1 2" 1 1 4" LFFB1842 $144 2" 1 3 4" 146 2 7 8" 2 5 8" 172 3" 2 3 4" 172 4" 3 3 4" 189 If factory-installed base is required, specify as part of model number for lateral file or storage cabinet. Factoryinstalled base option, if selected, will incur an upcharge equivalent with the models shown on this page which are available for field installation. Page 18 LF Series

LF SERIES Metal Filing Accessories A Pricing GSA SIN 711-3 Overview See page 12 Shelves page Wardrobe Kits page D W H For use with Model Price Counterweight Kits 1 1 8" 13 3 8" 11 5 8" 30"W file LFCW30 $ 199 16 3 8" 36"W file LFCW36 199 19 3 8" 42"W file LFCW42 199 Overfile/Storage Cabinet Shelves 16 1 2" 28 1 2" 1" 30"W unit LFF1830SH $ 91 34 1 2" 36"W unit LFF1836SH 95 40 1 2" 42"W unit LFF1842SH 98 Wardrobe Kits 2 3 4" 29 1 2" 3 3 4" 30"W unit LFF30WB $ 74 35 1 2" 36"W unit LFF36WB 82 Standard Includes Wardrobe kit: galvanized finish How to Specify Counterweight or Wardrobe Kit! Model Shelf! Model 2 Finish price group: STD = Group 1 STDM = Group M (+10%) 3 Finish designator IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 1" increments. Page 19 LF Series

LF SERIES Metal Filing Notes Page 20 LF Series

FUNDAMENTAL Metal Files and Cabinets Statement of Line IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions. 2-High Lateral Files See page 25 to specify. 3-High Lateral Files See page 25 to specify. 4-High Lateral Files See page 25 to specify. 5-High Lateral Files Available with five drawers, four drawers and fixed shelf with lift door, ADA-compliant models, or five drawers and posting shelf. See page 26 to specify. 30"W 36"W 42"W 27"H 30"W 36"W 42"W 39"H 30"W 36"W 42"W 51"H 30"W 36"W 42"W 65"H Overfiles See page 27 to specify 30"W 36"W 42"W 29"H Storage Cabinets See page 27 to specify. 30"W 36"W 42"W 27"H 39"H 51"H 65"H Counterweight Kits See page 28 to specify. Overfile/Storage Cabinet Shelves and Wardrobe Kits See page 28 to specify. Page 21 Fundamental

FUNDAMENTAL Metal Filing Files and Cabinets O Overview Product Info See page 23 Filing Capacities page 24 Paper Management page 29 Top is finished so the file can be used as a stand alone unit. Locking is standard. Select key random or key specific. Note: Lock cores must be specified separately for key specific option. Drawer Pull Options: Three drawer pulls are available on Fundamental files. Knockouts are standard for ganging side-by-side or for securing to a wall. Integrated drawer slide and single interlock mechanism are part of the slide design, providing for quieter drawer operation and ensuring only one drawer may be opened at a time. Extended is recessed along the full front edge. Fixed shelf with lift door on applicable five-high lateral files replaces top drawer and accommodates standing binders up to 12"H. Built-in anti-rebound catch prevents drawer from accidently rolling open. Rail Pull Counterweight kit, specified separately, is required for all individual freestanding units. Kits include counterweight and bracket, packaged individually. Full ball-bearing drawer suspension allows both the drawer and suspension to extend together. Arc Pull Side-to-side file bars are standard; two per drawer. Four glides, standard, provide 3 4" adjustability and allow for sturdy, four-point loading. Front-to-back file bars are available separately for easy field installation. Replacement drawer fronts can be field installed. Label holder is standard with extended pull; one per drawer. Page 22 Fundamental

FUNDAMENTAL Metal Filing Files and Cabinets P Product Information Overview See page 22 Filing Capacities page 24 Paper Management page 29 Details Lateral file construction features coach seam welds. Right angle bend of the coach seam makes the strongest use of formed metal and presents a clean exterior with no exposed welds. Progressive slide suspension provides smooth drawer operation. Steel drawer interiors are prepainted cinder. ADA compliant lateral files feature the choice of rail or arc pull. The lock is placed at 38 5 8"H (above the third drawer), making it accessible from a seated position. Drawer fronts and lift doors in the top position on five-high lateral files are 1 9 16" taller than the other drawer fronts to accommodate the receding lift-door application. Exception: Drawer fronts on models with posting shelf are all the same height. Posting shelf is 1 3 8"H. Letter, legal and A4 filing is accommodated with conventional or hanging folders. See page 24 for filing capabilities. Side-to-side legal or letter filing can be accommodated with file bars that ship standard in file. Front-to-back filing can be accommodated by ordering the appropriate number of front-to-back file bars separately. Overfiles and storage cabinets feature hinged doors. IMPORTANT: Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 2" increments. Four adjustable glides are standard, providing 1" adjustability. Connections Knockouts are standard in all files and cabinets for ganging side-byside. Overfile can be used independently or in addition to any appropriate width Fundamental file or storage cabinet. Related Products Counterweight kit, specified separately, is required for all individual freestanding units. See page 28. Laminate file tops are available to provide a continuous worksurface over one or more files. See page 30. Paper management accessories are available. See page 29 Posting shelf, available on five-high lateral file, includes magnetic spring latch to open and close. Posting shelf is located above the third drawer and is 1 3 8"H. Page 23 Fundamental

FUNDAMENTAL Metal Filing Filing Capacities Application Guidelines Product Info See page 23 Paper Management page 29 Inside Inside Description Depth Width Height Filing Arrangements 18"D x 30"W lateral 14 7 8" 26 7 8" 9 3 8" Filing Hardware: Heavier lines in the illustrations at right indicate filing hardware. 18"D x 36"W lateral 14 7 8" 32 7 8" 9 3 8" 29 5 8" letter 25 1 4" legal 26 13 16" letter 26 13 16" legal Front-to-back file bars (2) Front-to-back file bar (1) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) 29 5 8" letter 29 5 8" legal 32 13 16" letter 32 13 16" legal Front-to-back file bars (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Front-to-back file bars can be specified separately. See the Perks Price List. Side-to-side file bar is standard; one per drawer. Drawer divider can be specified separately. See page 29. 18"D x 42"W lateral 14 7 8" 38 7 8" 9 3 8" 44 7 16" letter 35 5 8" legal 38 13 16" letter 38 13 16" legal Front-to-back file bar (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Page 24 Fundamental

FUNDAMENTAL Metal Filing Fundamental 2-, 3-, and 4-High Lateral Files T Pricing GSA SIN 711-3 D W H Model Price 2-High Lateral Files 18" 30" 27 1 4" FND18302 $ 885 36" FND18362 963 42" FND18422 1037 3-High Lateral Files 18" 30" 39 3 16" FND18303 $ 1035 36" FND18363 1176 42" FND18423 1277 4-High Lateral Files 18" 30" 51 1 8" FND18304 $ 1257 36" FND18364 1415 42" FND18424 1596 Overview See page 22 Counterweight Kits page 28 Paper Management page 29 Standard Includes 2, 3, or 4 drawers Lock: black Two side-to-side file bar per drawer Floor glides; adjustable to 3 4" How to Specify! Model 2 Pull option: R = Rail, textured black E = Extended, same paint as file ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic 3 Lock option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 4 Finish price group: STD = Group 1 STDM = Group M (+10%) 5 Finish designator IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 28. Front-to-Back File Bars See the Perks Price List. Laminate File Tops See page 30. Page 25 Fundamental

FUNDAMENTAL Metal Filing Fundamental 5-High Lateral Files F Pricing GSA SIN 711-3 Overview See page 22 Counterweight Kits page 28 Paper Management page 29 D W H Model Price 5-High Lateral Files 18" 30" 64 1 2" FND18305 $ 1684 36" FND18365 1843 42" FND18425 2016 Standard Includes Five lateral file drawers (four drawers and fixed shelf and lift door on applicable models) Lock: black Two side-to-side file bar per drawer Floor glides; adjustable to 3 4" 5-High Lateral Files with Fixed Shelf and Lift Door 18" 30" 64 1 2" FND18305LD $ 1759 36" FND18365LD 1917 42" FND18425LD 2088 5-High Lateral Files, ADA Compliant 18" 30" 64 1 2" FND18305ADA $ 1843 36" FND18365ADA 1999 42" FND18425ADA 2174 5-High Lateral Files with Posting Shelf 18" 30" 64 1 2" FND18305PS $ 1847 36" FND18365PS 2008 42" FND18425PS 2181 How to Specify! Model 2 Pull option: R = Rail, textured black E = Extended, same paint as file (not available on ADA Compliant models) ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic 3 Lock option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 4 Finish price group: STD = Group 1 STDM = Group M (+10%) 5 Finish designator IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. See page 28. Front-to-Back File Bars See the Perks Price List. Laminate File Tops See page 30. Page 26 Fundamental

FUNDAMENTAL Metal Filing Fundamental Overfiles and Storage Cabinets Pricing GSA SIN 711-3 Overview See page 22 Shelves & Wardrobe Kits page 28 D W H Model Price Overfiles 18" 30" 29 1 4" FND1830OF $ 786 36" FND1836OF 824 42" FND1842OF 892 Storage Cabinets 2 High 18" 30" 27 1 4" FND18302SC $ 919 36" FND18362SC 972 42" FND18422SC 1087 3 High 18" 30" 39 3 16" FND18303SC $ 972 36" FND18363SC 1019 42" FND18423SC 1134 4 High 18" 30" 51 1 8" FND18304SC $ 1019 36" FND18364SC 1079 42" FND18424SC 1194 5 High 18" 30" 64 1 2" FND18305SC $ 1075 36" FND18365SC 1142 42" FND18425SC 1257 Standard Includes Lock: black Floor glides on storage cabinets; adjustable to 3 4" How to Specify! Model 2 Keying option: KRB = Key random KSB = Key specific (-$24; specify lock core separately) 3 Finish price group: STD = Group 1 STDM = Group M (+10%) 4 Finish designator IMPORTANT: Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 2" increments. See page 28. Laminate File Tops See page 30. Page 27 Fundamental

FUNDAMENTAL Metal Filing Fundamental Accessories Pricing GSA SIN 711-3 Overview See page 22 Finishes & Materials page A1 D W H For use with Model Price Counterweight Kits 1 1 8" 23 1 4" 11 5 8" Any width file FNDACW $ 194 Overfile/Storage Cabinet Shelves 16 1 8" 28 1 2" 1" 30"W unit FND1830LFSHP $ 85 34 1 2" 36"W unit FND1836LFSHP 88 40 1 2" 42"W unit FND1842LFSHP 92 Wardrobe Kits 2 3 4" 29 1 2" 3 3 4" 30"W unit FND1830WB $ 74 35 1 2" 36"W unit FND1836WB 82 41 1 2" 42"W unit FND1842WB 85 Standard Includes Wardrobe kit: galvanized finish How to Specify Counterweight or Wardrobe Kit! Model Shelf! Model 2 Finish price group: STD = Group 1 STDM = Group M (+10%) 3 Finish designator IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 2" increments. Page 28 Fundamental

UNIVERSAL Metal Filing Paper Management GSA SIN 711-3 LF Series See page 11 Fundamental Files page 21 Model Number Index page 31 Finishes & Materials page A1 D W H For use with Model Price Side-to-Side File Bars 30"W file KFD30SS $ 58 36"W file KFD36SS 62 42"W file KFD42SS 67 Drawer Divider 10 11 16" 3 1 16" 7 1 2" KFDPM $ 37 Standard Includes Side-to-side file bars: galvanized finish Drawer divider: galvanized How to Specify! Model IMPORTANT: Drawer divider hooks on back of drawer body and can be used in any file. Page 29 Universal

UNIVERSAL Metal Filing Laminate File Tops GSA SIN 711-3 LF Series See page 11 Fundamental Files page 21 Model Number Index page 31 Finishes & Materials page A1 D W H For use with Model Price 18"D Laminate File Tops 18" 30" 1 3 16" For 18"D files SS1830LFTL $ 301 36" SS1836LFTL 335 42" SS1842LFTL 377 60" SS1860LFTL 512 72" SS1872LFTL 639 84" SS1884LFTL 787 Standard Includes Top: solid, pattern, or woodgrain laminate PVC (P) rim on front edge only Side and back edges: finished to match front rim How to Specify! Model 2 Rim option: P = PVC rim 3 Finish price group: STD = Standard finish 4 Finish designator 5 Rim color Rim Profile: PVC (P) IMPORTANT: A single file top may be secured to appropriate file width(s) to create a continuous surface. Page 30 Universal

Model Number Index How to Specify See page 3 Terms & Conditions page 4 Product Warranty page 6 ANSI/BIFMA page 8 Model See page Model See page Model See page FND18302................... 25 FND18302SC................ 27 FND18303................... 25 FND18303SC................ 27 FND18304................... 25 FND18304SC................ 27 FND18305................... 26 FND18305ADA............... 26 FND18305LD................. 26 FND18305PS................ 26 FND18305SC................ 27 FND1830LFSHP.............. 28 FND1830OF................. 27 FND1830WB................. 28 FND18362................... 25 FND18362SC................ 27 FND18363................... 25 FND18363SC................ 27 FND18364................... 25 FND18364SC................ 27 FND18365................... 26 FND18365ADA............... 26 FND18365LD................. 26 FND18365PS................ 26 FND18365SC................ 27 FND1836LFSHP.............. 28 FND1836OF................. 27 FND1836WB................. 28 FND18422................... 25 FND18422SC................ 27 FND18423................... 25 FND18423SC................ 27 FND18424................... 25 FND18424SC................ 27 FND18425................... 26 FND18425ADA............... 26 FND18425LD................. 26 FND18425PS................ 26 FND18425SC................ 27 FND1842LFSHP.............. 28 FND1842OF................. 27 FND1842WB................. 28 FNDACW.................... 28 KC2GMK..................... 9 KCCB1CK.................... 9 KFD30SS.................... 29 KFD36SS.................... 29 KFD42SS.................... 29 KFDPM..................... 29 KSCD001.................... 9 LFCW30.................... 19 LFCW36.................... 19 LFCW42.................... 19 LFF18302................... 15 LFF18302H.................. 16 LFF18302SC................. 17 LFF18303................... 15 LFF18303H.................. 16 LFF18303SC................. 17 LFF18304................... 15 LFF18304H.................. 16 LFF18304SC................. 17 LFF18305................... 15 LFF18305H.................. 16 LFF18305LD................. 15 LFF18305LDH................ 16 LFF18305SC................. 17 LFF1830OF.................. 17 LFF1830SH.................. 19 LFF18362................... 15 LFF18362H.................. 16 LFF18362SC................. 17 LFF18363................... 15 LFF18363H.................. 16 LFF18363SC................. 17 LFF18364................... 15 LFF18364H.................. 16 LFF18364SC................. 17 LFF18365................... 15 LFF18365H.................. 16 LFF18365LD................. 15 LFF18365LDH................ 16 LFF18365SC................. 17 LFF1836OF.................. 17 LFF1836SH.................. 19 LFF18422................... 15 LFF18422H.................. 16 LFF18423................... 15 LFF18423H.................. 16 LFF18424................... 15 LFF18424H.................. 16 LFF18425................... 15 LFF18425H.................. 16 LFF18425LD................. 15 LFF18425LDH................ 16 LFF1842OF.................. 17 LFF1842SH.................. 19 LFF30WB................... 19 LFF36WB................... 19 LFFB1830................... 18 LFFB1836................... 18 LFFB1842................... 18 SS1830LFTL................. 30 SS1836LFTL................. 30 SS1842LFTL................. 30 SS1860LFTL................. 30 SS1872LFTL................. 30 SS1884LFTL................. 30 Page 31 Resources

Notes How to Specify See page 3 Terms & Conditions page 4 Product Warranty page 6 ANSI/BIFMA page 8 Page 32 Resources

FINISHES & MATERIALS T Appendix Samples: Samples of Kimball Office materials are available upon request. Samples are to be used as guidelines only. Slight variations within commercial tolerance may occur between samples and finished products. Kimball Office carefully selects all materials used in every product, ensuring a commercially acceptable color and finish. To order samples: Visit the Partner web site at www.kimballoffice.com to order materials electronically Contact your Kimball Office Sales Representative or the nearest Kimball Office Showroom For Alliance program fabrics, contact our Alliance partner directly. Program Overview Laminate and PVC CSL Paint CSP See page page A2 page A3 page A4 page A5 page A6 Page A1 Finishes & Materials