Page: 1/5 1. Substance Name / Method of Preparation / Company Name 1.1. Product Information Trade Name: SureFill 1.2. Use of the Substance /Preparation Coating Agent 1.3. Information about the manufacturer/supplier Supplier CPSI Ltd Street / PO box Unit 3 Haslemere Ind Est, Pig Lane Country / zip code / town Bishops Stortford, CM23 3HG, UK Telephone No +44 (0) 1279 505514 Telefax +44 (0) 1279 755190 E-mail info@surecps-group.com Emergency Information 2. Hazards Identification 2.1. Classification according to regulation (EC) 1272/2008 (CLP/HGS) No hazardous substance in the sense of the corresponding regulation. Not subject to specific labeling. Specific labeling requirements: EUH208: Contains MIXTURE OF: 5-CHLORINE-2-METHYL-2H-ISOTHIAZOL-3-ONE + 2-METHYL-2H-ISOTHIAZOL-3-ONE (3:1). May cause allergic reactions. 2.2. Additional hazards to People or Environment known. 3. Composition / Information on Components 3.1. Chemical characterization (preparation) Description: pasty preparation, containing of polymer dispersion, filler and auxiliary substances 3.2 Hazardous components 4. First Aid Measures 4.1. General Measures Take people to safety, mind the self-protection of first-aid workers 4.2. After Inhalation Place concerned person in resting position. In case of unconsciousness, position concerned person in a stable side position. Efficiently protect against cooling down. Seek medical advice. 4.3. After Skin-Contact Rinse effected skin with plenty of water, take off all contaminated clothing. 4.4. After Eye-Contact Immediately rinse with plenty of clear water for 10-15 minutes, immediately seek medical advice from ophthalmologist. 4.5. After Swallowing Drink plenty of water in small sips (only when affected person is conscious) and do not induce vomiting. Immediately consult physician and give the substance s exact name. 4.6. Notes for the physician
Page: 2/5 5. Fire-Fighting Measures 5.1. Suitable extinguishing media The product is non-combustible. Adapt extinguishing measures to suit the environment. 5.2. Extinguishing media that must not be used for safety reasons 5.3. Special hazards caused by the material or the preparation itself, its products of combustion or resulting gases 5.4. Special protective equipment for fire fighting Wear self-contained breathing apparatus. 6. Measures in the event of unintentional release 6.1. Person-related safety measures Wear personal protective equipment (please see 8). Unprotected persons shall not be permitted to remain in the affected area. Avoid skin- and eye-contact. Avoid inhalation of vapors and mists. In case of unintentional release, pay attention to danger of slipping. 6.2. Environmental measures Comply with regional official regulations. Make sure that the material cannot leak into the sewage system, waters or soil (contain leaked material). Contain contaminated water/firefighting water. Dispose in duly identified containers. 6.3. Measures for Cleaning/Collecting Mechanically absorb with liquid binding material (e.g. Kieselguhr) and take care for proper disposal. Do not flush with water. Extract vapors. 6.4. Additional Instructions 7. Handling and Storage 7.1. Handling Instructions for safe Handling Avoid the formation of aerosols. In case of aerosol formation, specific safety measures are required (extraction, respiratory protection). Ensure suitable room- and workplace-ventilation. Spilled substance causes increased risk of slipping. Instructions on Fire and Explosion Protection 7.2. Storage Requirements concerning storage rooms/containers: none known. 7.2.2. Instructions on Storage with other Products 7.2.3. Additional Instructions on Storage Conditions: Protect against frost. Keep containers tightly closed, store in a cool place. 8. Exposure Limitation and Personal Protection Equipment 8.1. Control Parameters 8.2.1. Limitation and Monitoring of Exposure in Working Environment General Protection and Hygiene Measures: Avoid skin- and eye-contact. Do not eat, drink or smoke while working. Respiratory Protection: required. Hand Protection: Immediately rinse contaminated skin with water or water and soap. Remove contaminated clothing and wash before re-use. Apply skin-care product before and after work.
Page: 3/5 Eye Protection: Safety glasses with side protection (frame goggles). Body Protection: Wear suitable safety clothing. 8.2.2. Limitation and Monitoring of Exposure to Environment Make sure that the material cannot leak into the sewage system or soil. 8.3. Additional Instructions on Layout of technical Facilities Please mind the information mentioned in point 7. 9. Physical and chemical Characteristics 9.1. General Data Aggregate State/Form paste-like Colour sandy Scent characteristic 9.2. Safety-related Data Melting Point Boiling Point Flash Point Ignition Temperature Explosion Group Not explosive Explosion Limits Vapour Pressure Density ca. 1,7g/cm³ at 20 C Solubility in Water unrestrictedly mixable PH-Level ca. 8 at 25 C (500g/l H²O Partition Coefficient Octanol / Water Viscosity (dynamic) 9.3. Additional Data VOC-Content 4g/l 10. Stability and Reactivity 10.1. Conditions to be avoided Frost, Air Admission to Container 10.2. Materials to be avoided 10.3. Dangerous Decomposition Products When stored and handled according to instructions: none known. 11. Information regarding Toxicology 11.1. Information regarding toxic effect No information available. 12. Ecological Data 12.1. Ecotoxic Effects Do not introduce larger quantities into sewage treatment plants. 12.2. Mobility 12.3. Information on Elimination (Persistence and Degradability) 12.4. Additional ecological Instructions Make sure that the material cannot leak into the sewage system, waters or soil.
Page: 4/5 13. Instructions on disposal 13.1. Product Recommendation: Disposal according to instructions through incineration in a hazardous waste incineration plant. Smaller quantities may be disposed of in a household waste incineration plant. Comply with the regional official regulations 13.2. Uncleaned Packagings Recommendations: Completely empty packagings. Packaging is preferably to be recycled or further processed in compliance with the regional official regulations. 13.3. Waste Key Number For this product, no waste key number according to the European Waste Catalogue (EWC) can be specified as only the intended purpose of application defined by the user enables an allocation. The waste key number within the EU is to be established in consultation with the regional waste disposer. 14. Transportation Regulations 14.1. Land Transportation German GGVSE / ADR and RID ADR RID 14.2. Air Transportation German ICAO-TI/IATA-DGR 14.3. Maritime Transportation German IMDG/GGVSee 15. Legal Regulations 15.1. Labeling according to EU Guidelines Code letter and hazard designation of product Product is not subject to mandatory labeling. R-Clause Description S-Clause Description 15.2. National Guidelines Information on Employment Restrictions Consider employment restrictions for young people at work according to German 22 JArbSchG. Consider employment restrictions for child bearing and nursing mothers according to German 4 and 6 MuSchG. TA-Air CAS Number Material Number Class Classification according to German VbF No longer legally required since 01.03.03, no longer subject to regulations. Water Hazard Class 1 (self-classification) Chemical Safety No chemical safety assessment has been conducted for this product. 15.3. Additional International Regulations Data regarding the International Registration Status
Page: 5/5 16. Additional Data 16.1 Product The information contained herein is based on the present state of our knowledge and is exclusively intended to describe our products in terms of safety requirements. They do not represent any warranty of product properties in terms of the legal warranty obligations whatsoever. It is within the responsibility of the recipient of our products to ensure that any existing laws and legislation are adhered to. 16.2. Additional Data