THERMO SOLUTION Ceramic Thermal Insulating Coating 2014
What is Thermo Solution? THERMO SOLUTION is an ecologic coating based on ceramic nanospheres exhibiting excellent thermal insulation properties. THERMO SOLUTION thermal insulating coating embeds the most modern insulating technology in a thermos-like ultra-thin layer. THERMO SOLUTION saves energy by increasing the thermal insulation level in commercial and residential buildings. Compared to the high price of classic insulation, THERMO SOLUTION represents a cheaper alternative, but of higher quality.
Thermo Solution Coating Composition THERMO SOLUTION coating s functionality is based on the thermos system. Just like the latter keeps the liquid inside it at a constant temperature, in the same way does this coating conserve the temperature of the inside space it is destined for. THERMO SOLUTION contains a mixture of numerous silicon and ceramic spheres embedded in a latex-based acrylic liants. This combination makes this coating very light and elastic. Hence, THERMO SOLUTION dilates and contracts depending on the surface it is applied on. PROTECTS AGAINST HUMIDITY The vacuum particles in its componence determine an excellent thermal insulation, at the same time reducing the heat gained during the summer through the walls, from outside to inside, and the heat loss through the walls, from inside to outside, during the winter. STOPS THERMAL TRANSFER Reflects the heat and keeps it indoors in winter time. Reflects the heat and keeps the indoors cool during the summer.
The Efficacy of Thermo Solution Coating The technology behind THERMO SOLUTION makes it the coating material for the future for roofs and walls, available today. THERMO SOLUTION deflects, absorbs and dissipates radiant heat. Solar heat increases the temperature built up within the building by 75% to 90%. THERMO SOLUTION repels up to 75% of the heat, thus reducing the temperature by up to 45%. On top of this, THERMO SOLUTION presents over 80% solar reflectance, 96% UV resistance, and 90% emissivity. Thermal Insulation Solar Reflectivity Abrasion Resistance UV Ray Resistance
The Efficacy of Thermo Solution Coating The efficacy of the THERMO SOLUTION coating is given by its four exceptional qualities: 1. Excellent thermal insulation. 2. Anti-condensation character by eliminating the conditions of water droplets apparition and of the causes of mold formation, thus preventing it. 3. Thermo reflectance of sun rays, implicitly of infrared radiation. 4. Conserves internal heat by high reduction of heat transfer and by its excellent thermal insulating character. Conserving the temperature from the inside hence leads to minimized energy costs.
Benefits of the Thermo Solution Coating The main advantages of this paint: ȖȖExcellent thermal insulation Energy saved Lower costs ȖȖVery good hydroinsulation ȖȖFacile application ȖȖFireproofing The special paint THERMO SOLUTION protects against humidity and blocks the heat transfer. Its usage reduces the indoor space used with insulation and also reduces the weight of any structure or piece of the equipment the coating has been applied on. Also, it extends the life duration of the structure it is applied on. The paint s resistance doubles its efficacy in stopping the infiltrations.
Benefits of the Thermo Solution Coating THERMO SOLUTION is Class A fire-proofing and blocks the propagation of the flames. THERMO SOLUTION coating can have any colour from medium to pastel. The pigment does not affect the radiant efficiency of the product. Unlike the conventional insulating methods, like mineral wool, insulating fibers, prefabricated pipes insulation, THERMO SOLUTION is impermeable and is not affected by salty water. It forms a continuous, seamless layer. It also forms a layer with excellent resistance to weatherfastness, compared to other types of insulation.
Benefits of the Thermo Solution Coating THERMO SOLUTION coating: is a thermal barrier (excellent thermal insulator); reflects solar radiation (implicitly rejects heat); fire-proof (class A); prevents corrosion under the insulation; high water-vapour resistance; permeable to vapors (the support it is applied on is able to breathe ); prevents mold apparition and growth; only an ultra-thin layer necessary, of only 0,5-3 mm. quick and easy application: with the roller, trowel, brush or by gun (air-less spray gun); resistant to high impact and abbrasion; flexible (it dilates and contracts depending on the surface it is applied on); protects surfaces from salt water, rain, wind, soliciation of hot-cold weather cycles, chemical vapours, mold etc.; anticorrosive; reduces semnificatively or eliminates the formation of steam; eco-friendly; it doesn t contain toxic or flammable substances; the composition of the paint makes it be very light and very elastic; the product s resistance doubles its insulating efficiency; blocks vapours; waterproofs; seals off; resistant to temperatures as high as 260 C.
Benefits of the Thermo Solution Coating THERMO SOLUTION is a coating that helps you save energy and money. Because of its revolutionary properties, in winter time, this paint being an excellent thermal barrier, stops the heat loss through the walls, but also through the roof, and in the summer time, thanks to its ceramic content, it rejects the UV rays, thus protecting you from the heat. THERMO SOLUTION eliminates or reduces: the effect of thermal bridge thermal transfer; conductive heat transfer; convective heat transfer; thermal radiation; condensed water.
Areas of Use for Thermo Solution Coating This coating can be easily applied on any kind of surfaces: walls, roofs, metals, brick, stone, cement, concrete, wood, metal sheets etc. The THERMO SOLUTION coating is ideal for buildings that present a special kind of architecture, stucco, wall decorations etc. that don t allow the usage of classic thermal insulation. The layer s thickness of cca. 1 mm, laid by spraying, coats any geometrical form without affecting the original artistic appearance. Applications of THERMO SOLUTION in normal conditions: Thermal insulation of exterior walls of buildings Roofs thermal insulation Thermal insulation of indoors Application in rooms with high risk of fire Applications in very cold areas Metallic buildings in Alaska Cement mixers and reservoirs in Alaska Pipeplines Alaska Applications in very hot areas Pipelines in Kuwait
Areas of Use for Thermo Solution Coating Roofs Habitats roofs Metallic roofs Buildings roofs Barracks roofs Poultry farms roofs Wavy roofs Oil tanks roofs Airshafts Walls Rooms Floors Garages Indoors walls of old houses Metallic buildings walls Cereal bunkers Horse stables Insulating walls of steel foundries
Areas of Use for Thermo Solution Coating Auto Rooftops of refrigerated autovehicles Trailers roofs Semitrailers roofs or interior walls Racing cars - fire-proof walls, driver s seat, floor Inside ceiling of autotrailers Floor of autotrailers Roof of autotrailers Walls of autotrailers
Areas of Use for Thermo Solution Coating Air and naval Interior walls of airplanes Roofs of pilots cabins Ships Ship decks Pipelines in engine rooms Pipelines and reservoires in fishing ships Shipping rooms and stowages Engine rooms Extreme Applications HVACs Hot water boilers Water tanks Cold water tanks Reservoirs Mixing chambers for hot chemical substances Heat exchangers Hot oil reservoirs Military installations Freezers, commercial refrigerators Nitrogen reservoirs
Areas of Use for Thermo Solution Coating Pipelines Oil pipelines, under or above ground Underwater oil pipelines Oil transferring pipes Oxygen pipelines Irrigation pipes Hot water pipes Steam pipes Other Applications Airplanes hangar Base of bridges (reduces freezing) Potable water reservoirs Bridges Crane beams Hydrants Exterior compartmentalisation Construction boards Buses roofs.
Technical Data Sheet APPLICATION TECHNOLOGY: 1. Preparing of the support surface The surfaces that THERMO SOLUTION will be applied on must be clean, dried, dusted and uniform. 2. Applying of the primer layer on the adequately prepared surface is carried out by paint brush, lime brush, roller or by pulverization. Product consumption for the primer layer is of 50 g/m² - 100 g/m². 3. Applying of the THERMO SOLUTION thermal insulating coating is carried out after the complete drying of the primer layer. Before application, the product must be homogenized well by stirring. Applying of the product can be done by paint brush, lime brush, roller or by air-less spray gun. Minimum applying temperature: 10 o C. Product consumption for one layer of THERMO SOLUTION coating is of 1 L/m 2 at a thickness of 1 mm. The total thickness of the insulation must be between 0.5 3 mm, depending on the desired level of insulation. GUARANTEE: The product is guaranteed in its original package for 24 months. The guarantee for the applied product is of minimum 10 years. TRANSPORTATION AND STORAGE: The product does not require special transportation and storage conditions. Keep out of direct sun during transportation and storage. Temperature range of transportation and storage: 5-40 o C.
Technical Data Sheet PACKING PRODUCT ASPECT COLOUR DENSITY (g/cm 3 ) VISCOSITY (cp) COATING DRIED COATING THICKNESS SPECIFIC CONSUMPTION DRY SUBSTANCE CONTENT APPLICATION TEMPERATURE REACTION TO FIRE UV RADIATION REFLECTANCE ABRASION RESISTANCE RECOMMENDED METHOD OF APPLYING COLOURED FINAL COATING 2,5 L, 10 L, 30 L monocomponent homogeneous, pasty white or other colours 0,75 ± 0,05 25 000 ± 5 000 uniform, continuous, elastic 0,5-3 mm 1 L/m 2 58 ± 2% 10 o C - 130 o C Class A (not flammable) - product is fire-proof 99% high spraying by airless spray gun on demand