UNIT DOSE A Sustainability Step for Fabrics Liquids

Similar documents
Life Cycle Assessment of Tetra Recart Cartons and Alternative Soup Containers on the U.S. Market July 2014

BIOLAS PROJECT. A project financed by:

Human impact on the environment

Environmental Product Declaration

i-report tool prepared by:

Environmental Product Declaration

Various types of pollution exist depending on the kind of environment that is being affected. What is air pollution?

1. Project Overview 2. PE Americas 3. LCA Overview 4. Project Goal & Scope 5. Results. Higher Societal Value of Glass Recycling

Sustainability at Henkel: Our Experience with Supply Chain Standards and Carbon Footprinting

Environmental product declaration. KONE MonoSpace Special

KONE TravelMaster 110. Environmental product declaration

Environmental product declaration

Appendix A 2. Appendix A Description of result parameters

Environmental Product Declaration

Environmental Product Declaration

Biogas from waste materials as transportation fuel benefits from an environmental point of view

Chapter: Conserving Resources

How Ecosystems Work Section 2. Chapter 5 How Ecosystems Work Section 2: Cycling of Materials DAY 1

BillerudKorsnäs Design

DEMONSTRATING THE BENEFITS OF LIFE CYCLE ASSESSMENT

Waste management options and climate change - the case of biowaste

In the UK, the most common disposal method is landfill. Incineration, anaerobic digestion and other disposal methods are also used.

Design for Environment. Prof. Steven D. Eppinger MIT Sloan School of Management

Acid deposition accumulation of potential acid-forming particles on a surface acids can result from natural causes

Life Cycle Assessment of the Cement Industry in Zimbabwe

Environmental Conservation

ENVIRONMENTAL PRODUCT DECLARATION for the LoFric Hydro-Kit catheter system. Verified by: DNV (Det Norske Veritas Certification AB)

Water Pollution & Quality. Dr. Deniz AKGÜL Marmara University Department of Environmental Engineering

Qbiss by trimo Wall. Environmental Product Declaration

Chapter: Conserving Resources

Offering Consumer-Relevant Solutions and Influencing Consumer Choices. Uwe Bergmann OECD CCP Conference on Consumer Education 24 October 2008

RECYCLING vs. REUSE ENVIRONMENTAL BENEFITS OF RE-CYCLING VERSUS RE-USE CORRUGATED BOARD PACKAGING AS ILLUSTRATION

BillerudKorsnäs Supreme

CHARTER UPDATE 2010: ADVANCED SUSTAINABILITY PROFILES FOR HOUSEHOLD SOLID LAUNDRY DETERGENTS 1 ST REVISION - 30 MAY 2012

Pure Supreme. Environmental Product Declaration.

opyright NextGen Life Cycle Analysis

Billerud Flute. Environmental Product Declaration.

INNOVIA APM 300. Environmental Product Declaration

Environmental Toxicology

I. Physical laws govern energy flow and chemical cycling A. Conservation of Energy 1. First Law of Thermodynamics (as it relates to ecosystems)

Compact detergents can do it!

Chapter 43 Ecosystems & Human Interferences

ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO Isover Roof N 160 mm. Realization data: Version:

Guiding Questions. What is acid rain, how is it formed, and what are some of its impacts?

Carbon Footprint and Life. Experience. Christian Leroy, ESTAL Congress Sept 2009

Environmental Product Declaration PLSES. 3-phase induction ODP motors

/05. sustainability. of the production chain. From biodegradability. to the second life of. Mater-Bi: our fundamental. concepts for.

Questions 1 4 refer to the diagram of the earth s atmosphere shown above. 3. The section of the atmosphere responsible for our daily weather.

The ARPRO Life Cycle Assessment

ENVIRONMENTAL ISSUES EMISSIONS, POLLUTION CONTROL, ASSESSMENT AND MANAGEMENT

BillerudKorsnäs Decor

6. What are the two main components of our environment? Answer. 7. Why are green plants called producers? Answer.

Environmental Product Declaration FLSES. 3-phase induction motors with cast iron frame

BillerudKorsnäs Supreme

ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025

Product Environmental Profile

ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025

Glossary of sustainability related terms

BillerudKorsnäs Liquid LC

ENVIRONMENTAL IMPACT OF CHEMICALS IPC NOTES

ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025

Product Environmental Profile TeSys LC1F

ACCEPTED MODERN TECHNOLOGY WOOD-FIRED BOILERS FOR POWER STATIONS SOUTHWOOD RESOURCES FORESTRY TASMANIA

Environmental Product Declaration

Korsnäs white. Environmental Product Declaration

ENVIRONMENTAL PRODUCT DECLARATION BILLERUDKORSNÄS DECOR

Korsnäs Liquid FC. Environmental Product Declaration

Environmental Report 2001

Korsnäs Liquid lc. Environmental Product Declaration

Product Environnemental Profile LSES. 3-phase induction motors with aluminium frame

NOTES 12.4: HUMAN ISSUES, IMPACTS, & SOLUTIONS. Pages ,

ENVIRONMENTAL PRODUCT DECLARATION Kerto LVL

How Ecosystems Work Section 2

Korsnäs Liquid lc. Environmental Product Declaration

BillerudKorsnäs White

on the feedstock wheat straw

READING GUIDE FOR THE REPOSITORY ON WOOD FURNITURE BP X Contents. Introduction 2

Global Insolation Budget. Solar Radiation. Greenhouse Gases. Air: Climate and Pollution. Weather, Climate, Winds, Rain

Product Environmental Profile TeSys D Contactors DC 25 to 38A

Environmental Product Declaration Align Open Binder with Metal Shelf Credenza

BillerudKorsnäs Artisan

LCA of bioplastics packaging

Future of Bioplastics

Section 2: The Cycling of Matter

Land use for agriculture

Product Environmental Profile TeSys GV3 Motor Circuit-Breakers

ENVIRONMENTAL PRODUCT DECLARATION BILLERUDKORSNÄS ARTISAN

Sustainability in Plastics. Calcium Carbonate [in nature, in life]

Layers of the Atmosphere. Troposphere Stratosphere Mesosphere Thermosphere

What is manure worth?

Section 2: The Cycling of Materials

Product Category Rules (PCR) (Approved PCR ID: PA-AC-01) PCR Name: Powdered Laundry Detergent

2/11/16. Materials in ecosystems are constantly reused Three cycles: The Carbon Cycle The Nitrogen Cycle The Phosphorus Cycle

TEXTBOOK QUESTIONS AND THEIR ANSWERS. Q.1. What are the different ways in which water gets contaminated?

Product Environmental Profile

Chapter 2 9/15/2015. Chapter 2. Penny Boat. 2.1 The Role of Water in Cycles of Matter

Nutrient Recovery and Reuse (NRR) in European agriculture.

Nutrient Cycling & Soils

Packaging s Contribution to Food Waste Prevention

Product Environmental Profile

Transcription:

UNIT DOSE A Sustainability Step for Fabrics Liquids

Unilever Supports Sustainable Development of Detergents with Capsules A SUSTAINABILITY STEP FOR FABRICS LIQUIDS CAPSULES UNIT DOSE Unilever is committed to meeting the needs of customers and consumers in an environmentally sound and sustainable manner, through continuous improvement in environmental performance in all our activities. Product innovation has been one of the major influences in reducing the environmental impact of laundry detergent. Sustainable consumption of detergents has been promoted by linking it to other benefits which consumers find more important. Unit dose can do that by:- Offering the consumer just add two convenience. Reducing usage by avoiding that little bit extra. 14% 12% 10% 8% 6% 4% TABLETS VALUE % OF FABRICS SOLUTION WASH Fabrics washing tablets, first widely introduced by Unilever, do this and the sector has shown steady growth within Western Europe as all major brands have introduced tablets. 2% 0% 1997 1998 1999 2000 Tablets have already produced an Industry environmental saving of over 250,000 tonnes of product per year. Unit dose capsules now offer this same win-win combination in liquids form. Although liquids have a much smaller market share than solid detergents (powders plus tablets) capsules will now enable consumers to wash more sustainably with liquids too.

DETERGENT CONSUMPTION Capsule users typically dose 50g of product. Thus capsules provide a reduction in product usage compared with habits dosage for other formats in almost all countries. If liquids unit dose achieves the same sector penetration as tablets have, the Industry will reduce environmental loading by a further 50,000 tonnes of product per annum. THIRTY YEARS AGO Washing used twice as much water and more than three times as much detergent as it does today. We soaked 20% of wash-loads, compared with 2% now. The average wash temperature was 65 C, now it is 45 C. 4 out of 10 washes were boil washed; now it s 1 in 10. DETERGENT CONSUMPTION PER WASH Habits dosage g/wash 200 150 100 50 CAPSULES CAPSULES CAPSULES CAPSULES CAPSULES CAPSULES CAPSULES CAPSULES N/A 0 UK IRE NL FR Tablets Conc Pdr Std Pdr Conc Liq Std Liq LIFE CYCLE ASSESSMENT *AISE: Association Internationale de la Savonnerie, de la Détergence et des Produits d Entretien As with most detergent products, the main impact of liquids is in the use phase and results from the energy needed to heat water. The detergent industry and machine manufacturers are working together to reduce this impact. More sustainable consumption means encouraging consumers to use the correct (usually lower) product dosage, choose the correct wash cycle and not wash part loads. All of these are highlighted by the AISE s * Washright campaign. The nutrification potential impacts the disposal stage but is reduced by lower product dosages. It is a direct result of the emission of the organic components of the product entering the sewage system after use. In the absence of sewage treatment this would feed the growth of algae and other life forms. However, this nutrient contribution is small compared to the total nutrient loading on the environment, which includes the contribution of agricultural, human and industrial waste as the most dominant forms.

Unilever Supports Sustainable Development of Detergents with Capsules ENVIRONMENTAL INDICATORS USED IN LCA Global Warming : emissions of greenhouse gases are leading to an increased absorption of radiation emitted by the earth resulting in global warming. Contributing emissions include carbon dioxide, methane and nitrous oxide and are expressed in terms of carbon dioxide equivalence. Acidification : acid deposition on soil and water can lead to detrimental effects on both flora and fauna. The acidifying emissions are the oxides of sulphur and nitrogen oxides that result from combustion processes. Photochemical Oxidant Creation : low-level smog is formed by the reaction of nitrogen oxides and volatile organic compounds (VOCs) under the influence of UV light. Contributing emission sources include the manufacture of plastic packaging materials and the combustion of natural gas. Nutrification : the emission of nutrients can lead to increases in biomass production. In water, this can lead to algal blooms resulting in oxygen depletion that affects higher species such as fish. Undesirable shifts in numbers of species can also occur, resulting in a threat to biodiversity. Contributing emissions from the detergent life cycle are phosphate and biodegradable materials. Solid Waste: the sum of all the sources of solid waste over the product life cycle. The primary sources are from mineral-based raw material sourcing, solid fuel combustion and packaging materials. Energy: the total amount of primary fuel reserves extracted from the earth taking into account the efficiency of electricity generation and heat producing processes. This indicator is a basic measure of resource depletion but is useful because other indicators are related to energy. The examination of the energy profile can provide valuable insights into environmental performance in general. TYPICAL IMPACT OF FABRICS WASHING LIQUID BY LIFE CYCLE STAGE (UK data) GWP Acidification POCP Nutrification Solid Waste Energy Ingredients 0% 20% 40% 60% 80% 100% Packaging Production Comparison with the major laundry detergent formats in the countries where we already have capsules, shows that a shift to capsules generates improvements across several environmental performance indicators. The figures are calculated for habits dosages for the old formats. These results demonstrate the environmental advantage for capsules over liquids in Unilever s lead roll out countries. Transport LCA COMPARISON OF UNIT DOSE CAPSULES AND OTHER FORMATS Lever Fabergé Capsules vs Other Formats UK (Liquid) France (Liquid)* Netherlands (Liquid) UK (Std Pdrs) France (Std Pdrs) Netherlands (Conc Pdrs) UK (Tablets) France (Tablets) Netherlands (Tablets) Global Warming * Both standard and concentrated formats Acidification Use Disposal Also, capsules environmental position is generally better than, or at least equal to, powders and tablets. Of course, capsules only offer liquids (bleach-free) performance levels and this level of cleaning will not be adequate for all users of heavy duty, bleach-containing powders. However, we do expect many powders users to be satisfied with the level of cleaning offered by capsules and to make the change. Photochemical Oxidant Creation Nutrification Significant Improvement Significant Worsening No Change Solid Waste Energy

Unilever Supports Sustainable Development of Detergents with Capsules PACKAGING CONSUMPTION Unilever considers its use of packaging very carefully to satisfy the demands of consumers and trade customers, ensure appropriate presentation on shelf and meet the needs of national and international distribution. Packaging is an integral part of the product and the consumers first point of contact with the brand. It helps protect the product from damage, contamination and deterioration during storage. It has to be aesthetically pleasing and provide marketing information. It must take into account consumer safety and provide all necessary safety instructions. In some cases, the packaging helps the consumer use the product efficiently. In short it must be safe, functional and attractive but minimise environmental impact consistent with these objectives. Achieving this balance is complex but important. Capsules are very sensitive to moisture and damage, hence they place rigorous demands on the packaging system. It is essential to maintain product quality and integrity a single leak can cause a mess and product wastage. This is why capsules need more packaging per wash than tablets, concentrated powders and concentrated liquids (ca 20-40%). However, as capsules are concentrated, they use less packaging than standard powders and liquids (15-70%). Of course they are new products and as with any new or existing packs, we are constantly looking for opportunities to further optimise packaging weight. In addition to ensuring the minimum amount of packaging for purpose is used, the packaging is fully recoverable. It can either be recycled or safely incinerated with energy recovery (the route depending on local conditions). Our policy is to: Design packaging to do its job with the lowest practical use of materials Select packaging materials on technical performance evidence Design packaging to ease recycling and energy reclamation CODE OF GOOD ENVIRONMENTAL PRACTICE The introduction of capsules will contribute to achieving the AISE s COGEP targets. The saving in chemicals per wash will approach 2% in 2001 with a similar reduction in poorly biodegradable materials of 1.8%. www.washright.com

Printed on Recycled Paper For further information on capsules, email us at capsules@unilever.com For further information on Unilever, visit us at www.unilever.com Published September 2001 Prepared and issued by Unilever HPC Europe