ELECTRONIC SUPPLEMENTARY INFORMATION (ESI) Flexible Microfluidic Cloth-based Analytical Devices Using Low-Cost Wax Patterning Technique

Similar documents
Papilla-like Magnetic Particles with Hierarchical Structure. for Oil Removal from Water

Scanning Electron Microscope & Surface Analysis. Wageningen EM Centre Marcel Giesbers

A Robust Procedure for the Functionalization of Gold Nanorods and Noble Metal Nanoparticles

Supporting Information for. Multiple semi-quantitative colorimetric assays in compact embeddable microfluidic

Supporting Information

Anderson Materials Evaluation, Inc.

Electronic Supplementary Information

Supporting Information. Hematite photoanode with gradient structure shows an unprecedentedly low onset

A NEW APPROACH TO STUDYING CAST CB2 STEEL USING SLOW AND VERY SLOW ELECTRONS

INFLUENCE OF NON-THERMAL MICROWAVE EFFECTS ON HEMP FIBER OBTANED BY MICROWAVE ASSISTED DEGUMMING

Supplimentary Information. Large-Scale Synthesis and Functionalization of Hexagonal Boron Nitride. Nanosheets

An XPS and Atomic Force Microscopy Study of the Micro-Wetting Behavior of Water on Pure Chromium* 1

Supporting information

Observation in the GB (Gentle Beam) Capabilities

SUPPLEMENTARY INFORMATION

The Composition of the Rare Earth Based Conversion Coating Formed on AZ91D Magnesium Alloy

Supporting Information

Facile synthesis of Fe 3 O 4 nanoparticles on metal organic framework MIL- 101(Cr): characterization and its catalytic activity

STUDY ON CHEMICAL TREATMENT OF CELLULOSE FIBER TO IMPROVE HEAT RESISTANCE AND THE MECHANICAL PROPERTY OF COMPOSITE MATERIALS USING TREATED FIBER

Angle-resolved XPS study of carbon steel passivity and chloride-induced depassivation in simulated concrete pore solution

3D dendritic WSe 2 catalyst grown on carbon nanofiber mats for efficient hydrogen evolution

Supporting Information. Low temperature synthesis of silicon carbide nanomaterials using

Supplementary Information

Supporting information

6. DENSIFICATION BY ULTRA-HIGH PRESSURE SINTERING (UHP)

Flexible Zn 2 SnO 4 /MnO 2 Core/shell Nanocable - Carbon Microfiber Hybrid Composites for High Performance Supercapacitor Electrodes

Supporting Information

Collagen based magnetic nanocomposites for oil removal applications

Supplementary Information

Ru Atom-modified Covalent Triazine Framework as a Robust Electrocatalyst for Selective Alcohol Oxidation in Aqueous Electrolytes

STATIC DISSIPATIVE BIOPOLYMER COMPOSITES FOR ELECTRONIC PACKAGING

Supplementary Figure 1. Substrate X-ray diffraction patterns Supplementary Figure 2. Substrate XPS.

Facile Synthesis of Silver Nano/Micro- Ribbons or Saws assisted by Polyoxomolybdate as Mediator Agent and Vanadium (IV) as reducing agent.

BRITTLENESS OF STRUCTURAL PM STEELS ADMIXED WITH MANGANESE STUDIED BY ADVANCED ELECTRON MICROSCOPY AND SPECTROSCOPY

Isolated Single-Atomic Ru Catalyst Bound on a Layered. Double Hydroxide for Hydrogenation of CO 2 to Formic Acid

Characteristic studies on the waste biomass-based biochars produced by fast pyrolysis

Supporting Information

Novel Ag-doped glass frit for high-efficiency crystalline silicon solar. cells

Electronic Supplementary Information

Large-scale Spinning of Silver Nanofibers as Flexible and. Reliable Conductors

JEOL JXA-8200 Superprobe

Towards the Epitaxial Growth of Silver on Germanium by Galvanic Displacement

SUPPLEMENTARY INFORMATION

Supporting Information

Supporting Information. Selective Metallization Induced by Laser Activation: Fabricating

THE EFFECT OF SOL-GEL TECHNIQUE ON THE ALUMINIUM SiCp COMPOSITE

SUPPORTING INFORMATION. A Rechargeable Aluminum-Ion Battery Based on MoS 2. Microsphere Cathode

N-doped Graphite Carbon Derived from Carbon Foam for Efficient Hydrogen Evolution Reaction

Dear Michelle: November 15, 2010

Supplementary Information for Hard Templating Ultrathin Polycrystalline Hematite Nanosheets and the Effect of Nanodimension

Installation of a Scanning Electron Microscope in the Hot-cell Laboratory of NRG Petten

Deforming water droplet with a superhydrophobic silica coating

Study of the Solubility of Iron Carbonate in the Presence of Acetic Acid using an EQCM

Terephthalonitrile-derived nitrogen-rich networks for high

Controllable Growth of Few-layer Spiral WS 2

These two types of analysis can therefore show uniformity of filler content, identity of filler, and concentration of filler.

Supplementary Information

*(Cheol Sang Kim) *(Chan Hee Park)

Study on the XPS-ESCA of Aluminum Phosphide Products

Supplementary Information

Microstructural Characterization of Materials

Supporting Information for

Supporting Information

Supporting Information

Examination of Analytical Conditions for Trace Elements Based on the Detection Limit of EPMA (WDS)

UNIVERSITY OF OSLO. Faculty of Mathematics and Natural Sciences

Task 3: Actinide targets properties after irradiation

Supporting Information

Supplementary Information

Improving Adhesive Bonding of Composites Through Surface Characterization

Supporting Information. Fabrication, Optimization and Characterization of Natural Dye Sensitized Solar Cell

CHARACTERISATION OF POWDERS SAMPLES BY SCANNING ELETRONIC MICROSCOPY (SEM), DIFFRACTION OF X-RAYS AND PARTICLE SIZE DETERMINATIONS

Supplementary Figure S1 Photograph of MoS 2 and WS 2 flakes exfoliated by different metal naphthalenide (metal = Na, K, Li), and dispersed in water.

NaHCO 3 -enhanced hydrogen production from water with Fe and in-situ highly efficient and autocatalytic NaHCO 3 reduction into formic acid

Electronic Supplementary Information A general method to prepare transition-metal ammonium phosphate nanoflake constructed microspheres

A Novel Method for Low-Resistivity Metal-Interconnection by Using Metallic Functional Liquids and Catalytically Generated Hydrogen Atoms.

School of Materials Science and Engineering, South China University of Technology,

Formation of Titanium Oxide by Thermal-Electrochemical Process on the Blasted Titanium Alloys Substrate

Journal of Fundamental Sciences

Supplementary Information. Capacity fade in high energy silicon-graphite electrodes for lithium-ion batteries

Microfluidic Channels for Silicon Photonic Chemical- and Bio-Sensors. Michael D Agati Mentor: Dr. Swapnajit Chakravarty PI: Professor Ray T.

Passivation of InAs and GaSb with novel high dielectrics

Matrix-free synthesis of spin crossover micro-rods showing large hysteresis loop. centered at room temperature

Characterization of carbon nitride thin films deposited by microwave plasma chemical vapor deposition

Flame Treatment of Polypropylene: A Study by Electron and Ion Spectroscopies

Supplementary Figure 1 TEM of external salt byproducts. TEM image of some salt byproducts precipitated out separately from the Si network, with

Production of Few-Layer Phosphorene by Liquid Exfoliation of Black Phosphorus

Microanalysis with high spectral resolution: the power of QUANTAX WDS for SEM

National Institute of Technology Calicut

REPORT: Study of a Sample of Raw Iron Ore Pellets. with MAYA Elemental Laser Analyzer in a Stream Mode

High Resolution XPS Study of a Thin CoO 111 Film Grown on Co 0001

A Simple Nickel Activation Process for Electroless Nickel-Phosphorus Plating on Carbon Fiber

SEM, TEM and SLEEM (Scanning Low Energy Electron Microscopy) of CB2 Steel after Creep Testing

Interface studies in a Ti-6Al-4VJsigma fiber composite

Water-Enhanced Oxidation of Graphite to Graphene Oxide with Controlled Species of Oxygenated Groups

An anti-galvanic replacement reaction of DNA templated silver. nanoclusters monitored by light-scattering technique

Mechanics Capability and Structure of Ion Nitrocarburized Layer of 42MnCr52 Steel Chun-Yang LIU 1, Chun-Hua HU 2,a, Zhi-Jie SUN 2 and Long LI 2

Supplementary Information Electrospray Deposition-Induced Ambient Phase Transition in Copper Sulphide Nanostructures

Electronic Supplementary Information (ESI) for

Atmospheric Pressure Plasma Treatment for Composites Bonding

Transcription:

ELECTRONIC SUPPLEMENTARY INFORMATION (ESI) Flexible Microfluidic Cloth-based Analytical Devices Using Low-Cost Wax Patterning Technique Azadeh Nilghaz, a,b Dedy H.B. Wicaksono,* a Dwi Gustiono Riban, c Fadzilah Adibah Abdul Majid, d Eko Supriyanto b and Mohammed Rafiq Abdul Kadir a a Dept. of Biomechanics and Biomedical Materials, Faculty of Health Science and Biomedical Engineering, Universiti Teknologi Malaysia, Skudai, 81310 Johor, Malaysia b Dept. of Clinical Science and Engineering, Faculty of Health Science and Biomedical Engineering, Universiti Teknologi Malaysia, Skudai, 81310 Johor, Malaysia c Ibnu Sina Institute for Fundamental Science, Universiti Teknologi Malaysia, Skudai, 81310 Johor, Malaysia d Dept. of Bioprocess Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 Johor, Malaysia. *Corresponding author E-mail: dedy.wicaksono@biomedical.utm.my 1 P age

I. Scanning Electron Microscopy (SEM) of Cotton Fiber Scanning Electron Microscopy (SEM) imaging was conducted on the untreated and scoured cotton fabrics samples using Low-Vacuum SEM JEOL JSM-6390. Figure S1, S2, and S3 show the images of untreated, NaOH-scoured, and Na 2 CO 3 -scoured cotton fiber, respectively. Figure S1. Secondary electron image (SEI) SEM image of cotton fiber before scouring, showing an outer layer of natural wax on its wall Figure S2. Secondary electron image (SEI) SEM image of cotton fiber after NaOH scouring/mercerization, showing the underlying spiral winding cellulose with some remain of the non-cellulosic materials 2 P age

Figure S3. Secondary electron image (SEI) SEM image of cotton fiber after Na 2 CO 3 scouring/bleaching, showing the underlying spiral winding cellulose with some remain of the non-cellulosic materials, similar as the result of NaOH scouring II. Field-Emission Scanning Electron Microscopy (FESEM) of Cotton Fabrics FESEM imaging was conducted on cotton fabrics on which silver (Ag) nanoparticles ink were dropped, as described in the Materials and Methods section of the main paper. FESEM was carried out using Cold FESEM Hitachi SU-8000 in its low-angle backscattered electron (LA-BE) imaging mode. This mode enables high-contrast observation of the nanoparticle on the cotton fabrics. Results are shown in figure S4, S5, and S6 for the untreated, NaOH-scoured and Na 2 CO 3 -scoured cotton fabrics, respectively. Figure S4. Low-angle backscattered electron image (LA-BE) FESEM image of silver (Ag) nanoparticle ink flown into untreated cotton fabrics. Brighter parts indicate the Silver element which has heavier atomic weight. 3 P age

Figure S5. Low-angle backscattered electron image (LA-BE) FESEM image of silver (Ag) nanoparticle ink flown into.naoh-scoured cotton fabrics. Brighter parts indicate the Silver element which has heavier atomic weight. Figure S6. Low-angle backscattered electron image (LA-BE) FESEM image of silver (Ag) nanoparticle ink flown into Na 2 CO 3 -scoured cotton fabrics. Brighter parts indicate the Silver element which has heavier atomic weight. 4 P age

III. Energy-Dispersive Electron Spectroscopy (EDS) of Cotton Fabrics EDS was carried out using Oxford INCA EDX attached to FESEM JEOL JSM-7600F. Another series of EDS was also performed using similar machine attached to Hitachi Tabletop SEM TM3000. Figure S7 shows the SEM images of the investigated non-wax area of untreated (A), NaOH-scoured (C) and Na 2 CO 3 -scoured (E) cotton fabrics, with their EDS spectra in (B), (D), and (F), respectively. The Atomic percentage composition of Carbon and Oxygen atoms from each sample is listed in table S1. Figure S7. SEM and the corresponding EDS spectra of the unwaxed regions in untreated (A)-(B), NaOH-scoured (C)-(D), and Na 2 CO 3 -scoured (E)-(F) cotton fabrics, respectively. Table S1. Carbon and Oxygen atomic composition in percentage, of the non-wax area from untreated and scoured cotton fabrics, based on EDS spectra shown in fig. S7 Treatment Atomic % C Atomic % O O/C ratio Without treatment 59.33 40.67 0.69 NaOH-scoured 54.67 45.33 0.83 Na 2 CO 3 -scoured 64.84 35.16 0.54 The result of EDS performed in Tabletop Hitachi SEM TM3000 is listed in table S2 Table S2. Carbon and Oxygen atomic composition in percentage, of the non-wax area from untreated and scoured cotton fabrics, based on EDS spectra on a different machine, TM 3000. Treatment Atomic % C Atomic % O O/C ratio Without treatment 54.336 45.664 0.840 NaOH-scoured 54.277 45.723 0.842 Na 2 CO 3 -scoured 57.025 42.975 0.754 Figure S8 shows the SEM images of the investigated waxed area of untreated (A), NaOH-scoured (C) and Na 2 CO 3 - scoured (E) cotton fabrics, with their EDS spectra in (B), (D), and (F), respectively. The Atomic percentage composition of Carbon and Oxygen atoms from each sample is listed in table S3. 5 P age

Figure S8. SEM and the corresponding EDS spectra of the waxed regions in untreated (A)-(B), NaOH-scoured (C)-(D), and Na 2 CO 3 -scoured (E)-(F) cotton fabrics, respectively. Table S3. Carbon and Oxygen atomic composition in percentage, of the wax area in the untreated and scoured cotton fabrics, based on EDS spectra shown in fig. S8. Treatment Atomic % C Atomic % O O/C ratio Without treatment 75.69 24.31 0.32 NaOH-scoured 73.28 26.72 0.36 Na 2 CO 3 -scoured 72.77 27.23 0.37 IV. X-Ray Photoelectron Spectroscopy (XPS) of Cotton Fabrics EDS results only show qualitative data on the elemental composition on the surface of the untreated and scoured fabrics. To get a more quantitative data on the chemical binding state of the elements, i.e. Carbon (C) atom and Oxygen (O) atom, XPS characterisation was conducted on the untreated, scoured and waxed cotton fabrics respectively. XPS was carried out using Kratos AXIS Ultra DLD Photoelectron Spectrometer. Figure S9 shows high resolution XPS spectra of the untreated and scoured cotton cloth. Figure S10 shows the C 1s peaks of XPS spectrum from waxed cotton cloth. Table S4 shows the relative concentration of the different peaks from the different cotton cloth specimens: C1 peak (285 ev) indicating C-C bond, C2 peak (286.7 ev) indicating C-O bond, C3 peak (288.2 ev) indicating O-C-O bond, and C4 peak (289.3 ev) indicating O-C=O bond. Table S5 shows the elemental relative concentration from each respective sample, based on the XPS characterization. 6 P age

Figure S9. High resolution C 1s peaks from the XPS spectra of untreated (A), NaOH-scoured (B), and Na 2 CO 3 - scoured (C) cotton cloth, respectively. 7 P age

Figure S10. C 1s peaks from the XPS spectra of Waxed Cotton Cloth. Table S4. Relative concentration of the different C atom binding state from the untreated, scoured and waxed cotton cloth samples, based from XPS spectra shown in fig. S9 and fig. S10. Relative concentration /% C-C or C-H aliphatic C-O (alcohols C-OH or C-O-OH and ethers) O-C-O (acetal) or C=O double ether, carbonyl O-C=O (carboxyl) C-C decrease /% Untreated 44.47 42.79 11.16 1.57 0 NaOH 26.85 57.13 13.02 3 treated 39.62222 Na 2 CO 3 28.12 54.68 15.02 2.18 treated 36.76636 Wax treated 96.25 2.58 1.16-116.438 Binding energy / ev 285 286.7 288.2 289.3 8 P age

Table S5. Elemental concentration from the untreated, scoured and waxed cotton cloth samples, based from XPS characterization. Elemental C O Ca N Si S O/C ratio concentration / at % Untreated 69.39 29.2 0.49 0.56 0.23 0.13 0.42 NaOH treated 63.64 35.89 0.11 0.24 0.12 0.56 Na 2 CO 3 treated 64.33 35.09 0.14 0.25 0.19 0.55 Wax treated 99.48 0.46 0.06 0.00 V. Optical Microscopy of Wicking in Single Cotton Fiber To prove that the increased wicking in NaOH- and Na 2 CO 3 -scoured cotton is due to the additional wicking mechanism along a single fiber, we conducted optical microscopy observation of wicking along a single cotton fiber of untreated, NaOH- and Na 2 CO 3 -scoured cotton. The fibers were extracted from each respective cotton fabrics samples. Figure S11 shows the optical light microscopy images of single cotton fibers without treatment (A) and after scouring with NaOH (B) and Na 2 CO 3 (C), after the application of 100 nl of red ink solution on top of the fibers ends. Figure S11 Wicking of red ink in single fiber of untreated (A), NaOH-scoured (B), and Na 2 CO 3 -scoured (C) cotton. The red curve at the bottom of each picture is the 100 nl ink droplet reservoir 9 P age