Adjusta Minit Anti-Surf

Similar documents
ACCess equipment Towers LADDers TresTLes & BoArDs PLATforms Low LeVeL ACCess 32-33


BoSS. Mobile Aluminium Tower 1450/850 Ladderspan. 3T - Through the Trapdoor Method

CLIMA 3T. Mobile Aluminium Tower with Climbing Frame 1450/850 3T - Through the Trapdoor Method USER GUIDE

LADDERSPAN 3T USER GUIDE. Mobile Aluminium Tower 1450/850 Ladderspan. 3T - Through the Trapdoor Method

Safety First Mobile Towers - 3T Method INTRODUCTION

Mobile Towers - 3T Method

BoSS Climalite Camera and lighting tower

BoSS Clima USER GUIDE. Mobile Aluminium Tower with Climbing Frame 1450/850. 3T - Through the Trapdoor Method

Safety First Mobile Towers - 3T Method INTRODUCTION

Inspect components prior to erection. Inspect tower prior to use. Castors locked and legs correctly adjusted. Stabilisers fitted as specified

Safety First Mobile Towers - 3T Method INTRODUCTION. Please read this guide carefully. Please note that diagrams are for illustrative purposes only.

BoSS Room-Mate. 3T - Through the Trap Method

BoSS SOLO 700. One Man Aluminium Tower EN /4 EN1298-IM-EN 3T - Through the Trap Door USER GUIDE

CLIMA 3T. Mobile Aluminium Tower with Climbing Frame 1450/850 3T - Through the Trapdoor Method USER GUIDE

ROOM-MATE. 3T - Through the Trapdoor USER GUIDE

CLIMA AGR. Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE

Mobile Tower 3T Method (Through The Trapdoor) Please read this guide carefully. Please note that diagrams are for illustrative purposes only.

LADDERSPAN AGR. BoSS Camlock Advance Guardrail Mobile Aluminium Tower 1450/850 Frames USER GUIDE

hss.com / Safety / Value / Availability / Support The 2013 HSS Guide to Working Safely at Height

Safety First Mobile Towers - 3T Method

Safety First Mobile Towers - 3T Method

MiniMax USER GUIDE. Mobile Aluminium Trade Quality Access Tower System. 3T - Through The Trapdoor Method

Span 300 Manual. DESIGNATION EN1004 CEN 1298 IM - en. CEN designation of this instruction manual EN 1298 IM en

MOBILE ACCESS TOWER INSTRUCTION MANUAL SHALLOW BRACE. Incorporating the 3T method of assembly

Span 300 Instruction Manual

STAIRMAX 700. Camlock Guardrail Aluminium Tower 3T - Through the Trapdoor USER GUIDE

AGR TOWER. Standard Features include. Tower Assembly Training Available

SOLO 700. One Man Aluminium Tower 3T - Through the Trapdoor Method USER GUIDE

This User Guide provides you with step by step instructions to ensure your system is erected easily and safely.

PROFESSIONAL ROLLING TOWER SYSTEMS

RS TOWER 52 double width rolling tower

GENERAL SAFETY RULES DOUBLE WIDTH 232 (NARROW RUNG) 3T INSTRUCTION MANUAL DISMANTLING NOTES: The 232 Tower Approved to the requirements of BS EN 1004

Span 500. Elite Instruction Manual. DESIGNATION SPAN 500 Double Width EN /12 XXXD SPAN 500 Single Width EN /8 XXXD

COMPONENT SCHEDULE SINGLE WIDTH SPAN TOWERS WITH LADDER FRAMES TO BSEN RUNG STARTER FRAMES

Industrial Aluminium Towers

Instruction Manual. DESIGNATION SPAN 500 Double Width EN /12 XXXD SPAN 500 Single Width EN /8 XXXD

Industrial Aluminium Towers

STAIRMAX 700 MK2 USER GUIDE. Aluminium Tower 700 Climbing Rung. 3T - Through The Trapdoor Method

Span 400 Instruction Manual

SIDE CANTILEVER TOWER SCAFFOLD. 3T - Through the Trapdoor Method USER GUIDE

1450/850. Instruction Manual. Mobile Access Tower

3T - Through The Trapdoor Method

EASY STAIR - EASY - SAFE

Alloy Tower. Instant. Product Key Features. Instant Span 300/400 Instant Snappy 300/400 og Snappy jr.

EASY STAIR EASIER! SAFER! Easy Stair improves site safety by removing the need for site personnel to climb ladders whilst carrying tools or materials.

MOBILE IS YOUR SCAFFOLD SITE-COMPLIANT?

2014 CATALOGUE

Span 400 Series Instruction Manual

product catalogue Sales & Rental Towers Span 300W... Span 400W... Span 500W Trade Towers TT Tower Safety...

INSTRUCTIONmanual. BoSS COMPACT SIDE CANTILEVER TOWER SCAFFOLD 3T Method - Through the Trap Door

Mini-Max Access Tower System Data-Sheets

8 Rung Industrial Tower

LAYHER ACCESS TECHNOLOGY CATALOGUE

Assembly Instructions

Industrial Aluminium Towers

Snappy Ladder 300 Instruction Manual

COLD DEFORMATION: A STRONGER ALTERNATIVE

Single Width Tower Assembly Guide

Assembly Instructions

ONE MAN TOWER. Instruction/safety manual

TOWER EXTENSION PACK 3 Model No. SSCL3. TOWER EXTENSION PACK 4 Model No. SSCL4 INSTRUCTIONS FOR: PLATFORM SCAFFOLD STAND. Model No. SSCL1.

Chairman's Message. Shadab Ahsan

Thanks for viewing this information PDF. There's more products, details, speci cation etc. on our website - CLICK THE LINKS ABOVE

A SAFER WAY TO REACH NEW HEIGHTS. Instruction Manual. Mobile Access Tower. 3T - Through the trap method

ABOUT US. Versatility. Service. Quality. Aftercare. Social Media

Rolling Towers. Layher Uni Light Tower Instructions for Assembly and Use. Mobile working platforms according to DIN EN 1004:

Industrial Aluminium Towers

BRIO Modular scaffolding

SAFE ERECTION AND USE OF ALUMINIUM TOWERS/SCAFFOLDS

END LINKED TOWER SCAFFOLD. 3T Method - Through The Trapdoor USER GUIDE

Assembly and Usage Instructions Z 600 S-PLUS mobile scaffold tower with stabilisers Z 600 S-PLUS folding scaffold unit COMPACT

Sales Hire Erections

3T - Through The Trapdoor Method

CUPLOK SGB CUPLOK SGB Group

BRIO Modular scaffolding

PERI PD 8 The cost-effective shoring for slab tables and high loads

Rolling Towers. Layher Rolling Towers Uni Wide. Safety Structure Instructions for Assembly and Use. Mobile working platforms to DIN EN 1004:

USER S Manual. HAKI Bridge System (HBS)

UNI Roof Catalogue CTG001-

Low Level Access Platform

Layher. Aluminium Rolling Towers. Layher SuperKlaxTower. Instructions for Assembly and Use

High-Clearance Alloy Scaffolds

A.R.E.S. Scaffolding. Steel Scaffolding Aluminum Scaffolding Scaffolding on Hire

User Guide. Scaffold Trolley

FALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES

USER S MANUAL. HAKI Loading Tower

LEWIS Miniscaff Folding Tower Assembly Guide

1 Man Mobile Aluminium Tower System

USER S MANUAL HAKI PUBLIC ACCESS STAIR

Modular Scaffolding MEKA 48

User Guide. Scaffold Trolley

Since it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one

INSTRUCTION MANUAL MOBILE ACCESS TOWER

Instant UpRight Ltd. Unit S1, Park West Industrial Park, Friel Avenue, Nangor Road, Dublin 12, Ireland. T: +353 (0) F: +353 (0)

USER S MANUAL HAKI COMPACT STAIR TOWER

EASY-SET SCAFFOLD TOWER OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS MODEL: AL-Q0107. Customer Service

EASY-SET SCAFFOLD TOWER OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS MODEL: AL-Q0106. Customer Service

Genlok User Guide.

Tower ASSEMBLY GUIDE

Transcription:

Adjusta Minit Anti-Surf The One Piece Adjustable Folding Work Platform» New slip resistant front feet» Adjustable to 4 different platform levels» Guardrail automatically in place» No loose components» Narrow width - fits through a standard doorway» Compact for transport & storage» Locking castors for security when in work mode» Enables operator to work in accordance with Work at Height Regulations» Part of the Anti-Surf and Adjusta Minit Families: sales@

Anti-Surf Range P1000 & P1500 Folding, Stabalised Mobile Access Platform Adjusta Minit The One Piece Adjustable Folding Work Platform Benefits include:» Quick and simple assembly» Captive deck and stairs» Guardrails to ensure compliance with WAHR» Designed to minimise operator misuse sales@» Publically available specification Low Level Work Platforms

Boss Room Mate Industrial room platform & tower system, ideal for interior decorating & maintenance work.» Modular, easy to store & transport» 775mm wide - fits through standard doorways, corridors» One person operation of folding base unit» Castors with compact trail/no trail positive locking brakes» 600mm x 1800mm slip resistant platform» Maximum platform safe working load of 275kg» Folding timber toeboard for quick & easy installation» Platform height of 3.5m with a safe working height of 5.5m» Lifetime support includes Kitemarked BoSS Repair Service Safe Working Height 2.80m 3.80m 4.5m 5.5m Platform Height 0.80m 1.80m 2.50m 3.5m Order code Composite Codes 320514 321514 322514 323514 Comptonent Name Height 1 Height 2 Height 3 Height 4 333513 125mm Castor 4 4 4 4 324413 Castor Adaptor 4 4 4 4 301514 Base Unit 1 1 1 1 302514 7 Rung Lift Frame - - 2 2 303514 4 Rung Guardrail Frame - 2-2 304511 1.8m Trap Door Deck 1 1 2 2 312513 1.8 Horizontal Brace 4 5 7 9 313513 2.1m Diagonal Brace - 1 2 4 304514 Toeboard Set - 1 1 1 317513 SP7 Fixed Stabiliser - 4 4 4 Total Tower Weight 63kg 90kg 142kg 161kg sales@

BoSS Evolution Manufactured using state-of-the-art laser cutting and robotic welding technology.» Compatible with original BoSS» Tube to tube joints makes frames lighter» Integral ladders with 250mm rung spacing» Frame horizontals with 500mm spacing» Ribbed tubing for increased grip» 3T Through the Trap build method» Two frame widths: 850mm and 1450mm» 2 deck lengths: 1.8m and 2.5m» Self closing trapdoors and windlock clips» Safe working load of 275kg per platform» Modular toeboard system» Braces locks colour coded» Patented double action locking claws» Floating spigots for easy assembly/dismantling» 150mm trail/no trail locking castors sales@

Boss Clima The premium aluminium modular access tower system featuring easy climb rung spacing» 250mm easy climb frame rung spacing» Ribbed rung tubing for increased grip» 3T - Through the Trapdoor or AGR build methods» Two widths - Single & Double» 2 slip resistant platforms - 1.8 & 2.5m» Self closing trapdoors & windlocks» Primed brace claw mechanism» Floating frame spigots» Self cleaning adjustable legs» Castors with compact trail/no trail positive locking brakes» Deck board edge protection through aluminum deck» Easy to use toeboard system» Lift shaft/confined space stabiliser available» Whole life support includes manufacturers Kitemarked BoSS Repair Service» Apart from the end frames the system is fully interchangable with BoSS Evolution tower components» Safe working load of 275kg per platform level up to a maximum of 950kg per tower (including self weight) sales@

Boss Lift Shaft Lightweight industrial aluminium modular lift shaft/confined space access tower system, ideal for lift shaft installation & servicing or confined space areas where standard BoSS towers will not fit» Integral ladders with 250mm easy climb rung spacing» 500mm frame rung spacing in compliance with WAHR» Ribbed rung tubing for increased grip» 3T - Through the Trap build method» Two widths - 850mm single width & 1450mm double» 1.3m slip resistant deck» Self closing trapdoors & windlocks» Safe working load of 275kg per platform level up to a maximum of 950kg per tower (including self weight)» Primed brace claw mechanism» Horizontal braces used as guardrails» Floating frame spigots» Self cleaning adjustable legs with base plates» Deck board edge protection via aluminium deck profile» Easy to use toeboard system» Lift shaft/confined space stabiliser available» Whole life support includes manufacturers Kitemarked» BoSS Repair Service Work at Height Regulations sales@

BoSS Staircase Staircase adaptation of the BoSS Ladderspan lightweight industrial modular access tower system, requiring minimal additional components.» 500mm frame rung spacing in compliance with UK Work at Height Regulations» Ideal where there is a need to frequently climb/descend the tower or when needing a two handed lift» Ribbed rung tubing for increased grip» 1450mm Double Width» 1.8m long slip resistant deck» Self closing trapdoor and windlock» Maximum platform S.W.L. of 275kg» Primed brace claw mechanism» Ease of brace identification:» Horizontal braces used as guardrails» Floating frame spigots» Self cleaning adjustable legs» Deck board edge protection» Easy to use toeboard system» Fully repairable» Castors with compact trail/no trail positive locking brake mechanism sales@

BoSS Zone 1 The world s premier Glass Reinforced Polymer - GRP (Fibreglass) Industrial modular access tower system.» Non conductive/sparking, non corroding, non oxidising» Clean & comfortable to handle in cold & warm climates» Up to 4 times greater than other GRP tower systems» Impact resistant claws» Integral ladders with 250mm easy climb rung spacing & 500mm frame rung spacing» Ribbed rung tubing for increased grip» 3T - Through the Trap build method» Two widths - 850mm single & 1450mm double» 2 slip resistant platform lengths - 1.8 & 2.5m» Maximum platform safe working load of 225kg» Primed brace claw mechanism» Self cleaning adjustable legs» Castors with compact trail/no trail positive locking brakes» Deck board edge protection via profile of GRP deck» Lift shaft/confined space stabiliser available sales@

Climalite Camera Tower Control Platform Lighting Tower for demanding production» Large working area, three platform width tower» Excellent stability» Specifically designed for camera/lighting use» Solid platform, no platform deflection» Wind resistance» Rated for use sheeted up to beaufort 7 wind speed» Noise reduction, includes features to reduce tower noise» Internal lifting system» Safe assembly, fully compliant with WAHR» Variable heights, use up to 6m (250mm rung spacing)» Ideal for use in studios and on location» Designed in conjunction with industry experts» Fast assembly, save time rigging on locations» Platform Safe Working Load - 350kg» EN 1004 compliant» Use with stabilisers or ballast (fixed inside the tower)» Connect towers together to provide a longer/wider working area sales@

Cam-Lock Advance Guardrail The BoSS Cam-Lock Advance Guardrailail provides an alternative build method for BoSS Clima, Evolution and Ladderspan towers.» Tower rigidity created by positive Cam-Lock action» Fewer components for quicker and simpler build» Guardrail in place before user ascends platform» Less susceptible to loss and damage» Easy to use Cam-Lock patent pending Product Length Height Weight Code 363515 1.8m 1.5m 8kg 363516 2.5m 1.5m 9.3kg Locked Unlocked sales@

Boss Cranable The BoSS Cranable tower system is designed to be lifted as a complete tower with a crane or similar lifting Device» Working height of 4.2m to 10.2m» Width of 0.85m» Available in two lengths of 1.80m and 2.50m» Floating spigots for easy assembly and dismantling» Wheel diameters of 125, 150 and 200mm» Patented double action trigger operated locking claws» Safe working load of 275kg, per platform level, uniformly distributed up to a maximum of 950kg per tower (including self weight)» The tower system can be easily and safely assembled & dismantled using the 3T (through the trapdoor) or Advance Guardrail (AGR) method sales@

Boss Stairmax The safest portable access solution for domestic & commercial staircases» Available in 3 widths 600, 700 & 850mm» 700 & 850mm frames are walk through» 1.3m slip resistant deck with windlock» Easy to store & transport» Whole life support Order code Components name No of components Weight (kg) 356513 Horizontal Brace 1.3m 6 1.00 357513 Diagonal Brace 1.64m 2 2.00 330511 Fixed Deck 1 7.60 361513 Handrail Frame 1 3.50 362513 0.6m 2 Rung Frame 4 3.10 330413 Swivel Base Plate 4 1.90 335513 Adjustable Leg Assembly 4 0.80 316509 End Toeboard 2 2.10 317509 Side Toeboard 2 2.20 Complete Tower 1 70.4 317513 SP7 Stabilisers 1 5.80 sales@

Minimax Heavy duty trade platform and tower system» Lightweight & Modular» Available in packs» Indoor and outdoor use» Fits through standard doorways & corridors» Versatile 260mm stepped height platform adjustment» Snap click fittings for ease of assembly» Locking castors for ease of mobility and stability» One person operation of Base Unit» Base Unit Guardrail Pack available» Easy to transport and store» Extension packs can be built using the 3T» The maximum platform S.W.L is 200kg sales@

Aluminium 2 Chord Unit Beams Our range of unit beams have been designed utilising decades of aluminium engineering expertise. Manufactured at our state of the art production facility at Maldon, Essex in accordance with ISO 9000 they are connected using steel spigots & bolts or traditional scaffold sleeves. Type 1-0.4m centres Type 3-0.4m centres The Youngman aluminium unit beams are:» Designed in accordance with all relevant British and European standards» Lightweight aluminium construction» Less than half the weight of steel» Range of beam sizes» Joints fully welded using latest CMT technology» All node gaps large enough to connect a standard scaffold fitting Type 4-0.4m centres Type 1-0.4m centres Order Code Length (m) 200000 4.1 200001 6.1 Type 3-0.4m centres Order Code Length (m) 200015 4.0 200016 6.0 200017 8.0 Type 4-0.4m centres Order Code Length (m) 200018 3.1 200019 4.1 200020 5.1 200021 6.1 200022 8.1 sales@

Aluminium Unit Beams 400mm Centres Load Span Table Load factor : 1.33 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 1.0 42.2 17.4 0.4 16.88 44810569 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 11.61 8.44 5.40 3.75 2.76 2.11 1.67 1.35 1.12 0.92 w (char) 8.73 6.35 4.06 2.82 2.07 1.59 1.25 1.02 0.84 0.69 W (kn ult) 34.8 33.8 27.0 22.5 19.3 16.9 15.0 13.5 12.3 11.0 W (char) 26.2 25.4 20.3 16.9 14.5 12.7 11.3 10.2 9.2 8.3 V (ult) 17.4 16.9 13.5 11.3 9.6 8.4 7.5 6.8 6.1 5.5 deflection (mm) 2.9 6.7 10.5 15.2 20.7 27.0 34.1 42.1 51.0 59.5 ii) mid point P (kn ult) 22.51 16.88 13.50 11.25 9.65 8.44 7.50 6.75 6.14 5.63 P (char) 16.92 12.69 10.15 8.46 7.25 6.35 5.64 5.08 4.62 4.23 deflection (mm) 3.0 5.4 8.4 12.1 16.5 21.6 27.3 33.7 40.8 48.6 iii) 2 point P (kn ult) 16.88 12.66 10.13 8.44 7.23 6.33 5.63 5.06 4.60 4.08 P (char) 12.69 9.52 7.62 6.35 5.44 4.76 4.23 3.81 3.46 3.07 deflection (mm) 3.9 6.9 10.8 15.5 21.1 27.6 34.9 43.1 52.1 60.0 iv) 3 point P (kn ult) 11.25 8.44 6.75 5.63 4.82 4.22 3.75 3.38 3.07 2.81 P (char) 8.46 6.35 5.08 4.23 3.63 3.17 2.82 2.54 2.31 2.12 deflection (mm) 3.6 6.4 10.0 14.4 19.6 25.6 32.4 40.0 48.4 57.7 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 1.5 25.5 17.4 0.4 10.2 4810569 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 9.07 5.10 3.26 2.27 1.67 1.28 1.01 0.82 0.67 0.57 w (char) 6.82 3.83 2.45 1.70 1.25 0.96 0.76 0.61 0.51 0.43 W (kn ult) 27.2 20.4 16.3 13.6 11.7 10.2 9.1 8.2 7.4 6.8 W (char) 20.5 15.3 12.3 10.2 8.8 7.7 6.8 6.1 5.6 5.1 V (ult) 13.6 10.2 8.2 6.8 5.8 5.1 4.5 4.1 3.7 3.4 deflection (mm) 2.3 4.1 6.4 9.2 12.5 16.3 20.6 25.5 30.8 36.7 ii) mid point P (kn ult) 13.60 10.20 8.16 6.80 5.83 5.10 4.53 4.08 3.71 3.40 P (char) 10.23 7.67 6.14 5.11 4.38 3.83 3.41 3.07 2.79 2.56 deflection (mm) 1.8 3.3 5.1 7.3 10.0 13.0 16.5 20.4 24.7 29.3 iii) 2 point P (kn ult) 10.20 7.65 6.12 5.10 4.37 3.83 3.40 3.06 2.78 2.55 P (char) 7.67 5.75 4.60 3.83 3.29 2.88 2.56 2.30 2.09 1.92 deflection (mm) 2.3 4.2 6.5 9.4 12.8 16.7 21.1 26.0 31.5 37.5 iv) 3 point P (kn ult) 6.80 5.10 4.08 3.40 2.91 2.55 2.27 2.04 1.85 1.70 P (char) 5.11 3.83 3.07 2.56 2.19 1.92 1.70 1.53 1.39 1.28 deflection (mm) 2.2 3.9 6.0 8.7 11.9 15.5 19.6 24.2 29.3 34.8 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 2.0 16.2 17.4 0.4 6.48 44810569 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 5.76 3.24 2.07 1.44 1.06 0.81 0.64 0.52 0.43 0.36 w (char) 4.33 2.44 1.56 1.08 0.80 0.61 0.48 0.39 0.32 0.27 W (kn ult) 17.3 13.0 10.4 8.6 7.4 6.5 5.8 5.2 4.7 4.3 W (char) 13.0 9.7 7.8 6.5 5.6 4.9 4.3 3.9 3.5 3.2 V (ult) 8.6 6.5 5.2 4.3 3.7 3.2 2.9 2.6 2.4 2.2 deflection (mm) 1.5 2.6 4.0 5.8 7.9 10.4 13.1 16.2 19.6 23.3 ii) mid point P (kn ult) 8.64 6.48 5.18 4.32 3.70 3.24 2.88 2.59 2.36 2.16 P (char) 6.50 4.87 3.90 3.25 2.78 2.44 2.17 1.95 1.77 1.62 deflection (mm) 1.2 2.1 3.2 4.7 6.3 8.3 10.5 12.9 15.7 18.6 iii) 2 point P (kn ult) 6.48 4.86 3.89 3.24 2.78 2.43 2.16 1.94 1.77 1.62 P (char) 4.87 3.65 2.92 2.44 2.09 1.83 1.62 1.46 1.33 1.22 deflection (mm) 1.5 2.6 4.1 6.0 8.1 10.6 13.4 16.5 20.0 23.8 iv) 3 point P (kn ult) 4.32 3.24 2.59 2.16 1.85 1.62 1.44 1.30 1.18 1.08 P (char) 3.25 2.44 1.95 1.62 1.39 1.22 1.08 0.97 0.89 0.81 deflection (mm) 1.4 2.5 3.8 5.5 7.5 9.8 12.5 15.4 18.6 22.1

Aluminium Unit Beam 732mm Centres Load Span Table Load factor : 1.33 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 1.0 30.7377 17.4 0.732 22.5 149419341 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 20.00 11.25 7.20 5.00 3.67 2.81 2.22 1.80 1.49 1.25 w (char) 15.04 8.46 5.41 3.76 2.76 2.11 1.67 1.35 1.12 0.94 W (kn ult) 60.0 45.0 36.0 30.0 25.7 22.5 20.0 18.0 16.4 15.0 W (char) 45.1 33.8 27.1 22.6 19.3 16.9 15.0 13.5 12.3 11.3 V (ult) 30.0 22.5 18.0 15.0 12.9 11.3 10.0 9.0 8.2 7.5 deflection (mm) 1.5 2.7 4.2 6.1 8.3 10.8 13.6 16.8 20.4 24.3 ii) mid point P (kn ult) 30.00 22.50 18.00 15.00 12.86 11.25 10.00 9.00 8.18 7.50 P (char) 22.56 16.92 13.53 11.28 9.67 8.46 7.52 6.77 6.15 5.64 deflection (mm) 1.2 2.2 3.4 4.9 6.6 8.6 10.9 13.5 16.3 19.4 iii) 2 point P (kn ult) 22.50 16.88 13.50 11.25 9.64 8.44 7.50 6.75 6.14 5.63 P (char) 16.92 12.69 10.15 8.46 7.25 6.34 5.64 5.08 4.61 4.23 deflection (mm) 1.6 2.8 4.3 6.2 8.4 11.0 14.0 17.2 20.8 24.8 iv) 3 point P (kn ult) 15.00 11.25 9.00 7.50 6.43 5.63 5.00 4.50 4.09 3.75 P (char) 11.28 8.46 6.77 5.64 4.83 4.23 3.76 3.38 3.08 2.82 deflection (mm) 1.4 2.6 4.0 5.8 7.8 10.2 13.0 16.0 19.4 23.0 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 1.5 25.5 17.4 0.732 18.666 149419341 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 16.59 9.33 5.97 4.15 3.05 2.33 1.84 1.49 1.23 0.92 w (char) 12.48 7.02 4.49 3.12 2.29 1.75 1.39 1.12 0.93 0.69 W (kn ult) 49.8 37.3 29.9 24.9 21.3 18.7 16.6 14.9 13.6 11.0 W (char) 37.4 28.1 22.5 18.7 16.0 14.0 12.5 11.2 10.2 8.3 V (ult) 24.9 18.7 14.9 12.4 10.7 9.3 8.3 7.5 6.8 5.5 deflection (mm) 1.3 2.2 3.5 5.0 6.8 8.9 11.3 14.0 16.9 17.9 ii) mid point P (kn ult) 24.89 18.67 14.93 12.44 10.67 9.33 8.30 7.47 6.79 6.22 P (char) 18.71 14.03 11.23 9.36 8.02 7.02 6.24 5.61 5.10 4.68 deflection (mm) 1.0 1.8 2.8 4.0 5.5 7.2 9.1 11.2 13.5 16.1 iii) 2 point P (kn ult) 18.67 14.00 11.20 9.33 8.00 7.00 6.22 5.60 5.09 4.10 P (char) 14.03 10.53 8.42 7.02 6.01 5.26 4.68 4.21 3.83 3.08 deflection (mm) 1.3 2.3 3.6 5.1 7.0 9.1 11.6 14.3 17.3 18.1 iv) 3 point P (kn ult) 12.44 9.33 7.47 6.22 5.33 4.67 4.15 3.73 3.39 2.92 P (char) 9.36 7.02 5.61 4.68 4.01 3.51 3.12 2.81 2.55 2.20 deflection (mm) 1.2 2.1 3.3 4.8 6.5 8.5 10.8 13.3 16.1 17.9 restraints (m) Pr (axial) Vrs (shear) depth Mrs (ult) I (mm.4) 2.0 16.2 17.4 0.732 6.48 149419341 span 3 4 5 6 7 8 9 10 11 12 i) UDL w (kn/m ult) 10.54 5.93 3.79 2.64 1.94 1.48 1.17 0.95 0.78 0.66 w (char) 7.93 4.46 2.85 1.98 1.46 1.11 0.88 0.71 0.59 0.50 W (kn ult) 31.6 23.7 19.0 15.8 13.6 11.9 10.5 9.5 8.6 7.9 W (char) 23.8 17.8 14.3 11.9 10.2 8.9 7.9 7.1 6.5 5.9 V (ult) 15.8 11.9 9.5 7.9 6.8 5.9 5.3 4.7 4.3 4.0 deflection (mm) 0.8 1.4 2.2 3.2 4.4 5.7 7.2 8.9 10.7 12.8 ii) mid point P (kn ult) 15.81 11.86 9.49 7.91 6.78 5.93 5.27 4.74 4.31 3.95 P (char) 11.89 8.92 7.13 5.94 5.09 4.46 3.96 3.57 3.24 2.97 deflection (mm) 0.6 1.1 1.8 2.6 3.5 4.5 5.8 7.1 8.6 10.2 iii) 2 point P (kn ult) 11.86 8.89 7.12 5.93 5.08 4.45 3.95 3.56 3.23 2.96 P (char) 8.92 6.69 5.35 4.46 3.82 3.34 2.97 2.67 2.43 2.23 deflection (mm) 0.8 1.5 2.3 3.3 4.4 5.8 7.4 9.1 11.0 13.1 iv) 3 point P (kn ult) 7.91 5.93 4.74 3.95 3.39 2.96 2.64 2.37 2.16 1.98 P (char) 5.94 4.46 3.57 2.97 2.55 2.23 1.98 1.78 1.62 1.49 deflection (mm) 0.8 1.3 2.1 3.0 4.1 5.4 6.8 8.4 10.2 12.1

Load Locations yes no yes no yes Support Locations yes yes no yes no no yes Intersecting unit beam isolated point load Splice Locations 1/3 1/2 Good Bad CALL or EMAIL NOW