Lenntech info@lenntech.com Tel. +1-152-610-900 www.lenntech.com Fax. +1-152-616-289 Micro-Klean The Micro-Klean filter cartridge is the result of continuing research and engineering efforts by M Purification. The Micro-Klean cartridges incorporate state-of-the-art fibre technology and engineering design advances. Produced in a variety of construction materials, this true graded density filter cartridge offers superior performance advantages and economics. Construction Micro-Klean cartridges are produced using fibres of controlled diameters and a patented manufacturing process that generates a true graded density depth cartridge. The cartridge provides open areas between the fibres that are progressively smaller and more numerous towards the inside diameter. This graded pore structure traps larger particles on the outer portion of the cartridge while smaller particles are captured as they progress through tortuous passageways in the cartridge wall. All fibres in this graded density structure are resin impregnated and polymerized to bond each filter into place producing a rigid, self-supporting structure. This rigid structure provides consistent filtration performance under varying pressures and eliminates the need for a centre-supporting core. Throughout the manufacturing cycle, testing, evaluation, and statistical process control are utilized to monitor Micro-Klean production. Our concern for product consistency ensures that the Micro-Klean cartridge provides the reproducible results that today s critical applications demand. The right micron rating for each filtration need The Micro-Klean cartridges are available in a wide range of nominal micron rating to fulfil almost all filtration requirements. From 1 μm to 150 μm nominal, Micro-Klean range is able to perform excellent pre-filtration or final filtration in various industrial market segments. Please refer to the ordering guide located at the end of this brochure to find the right micron rating for your application. Applications Paint, varnishes, solvent recovery Process water Photographic emulsions Oxide slurries Inks & dyes Plastics Organic solvents (alcohols, ketones, ethers...) and hydrocarbons Magnetic media Features & Benefits Highly efficient particle removal High dirt-holding capacity thus reducing filtration costs Ability to withstand high differential pressures (Delta P), hard structure not subject to collapse failure. Support core eliminated resulting in greater compatibility Reproductible filtration characteristics Customized shapes and sizes available upon request
Micro-Klean : the right cartridge to fi t your application The right formulation for each application Micro-Klean technology combines rigid structure and depth filtration in one cartridge to provide optimum performance in life and efficiency. The Micro-Klean G Series range is available in several formulations to fit your applications: a) Formulation This formulation includes cellulose fibres and a phenolic resin. These cartridges are recommended for strong reducing agents and medium to low ph range solutions. Used for photographic emulsions, oxide slurries, inks, process water, dye, plastics, and solvents. b) Formulation 8 This formulation includes acrylic fibres and a phenolic resin. General purpose cartridges usable on practically all applications, except potable water and food products. This cartridge has excellent resistance to acids. Can be used on inorganic acids and acid salts with concentration up to 10% at room temperature. They are also highly resistant to alkaline solutions at ambient temperature. A whole range of standard dimensions The Micro-Klean manufacturing process allows virtually all kind of configurations to fit in a variety of housings. a) Double open ended version Multiple of 9 ¾ or 10 are available from 1 module to 4 modules as standard. Double open ended cartridges are supplied without or with flat Volara gasket. This flat gasket (NG version) is more recommended for the tighter micron ratings (i.e. 1 & 5 μm nominal). b) Single open ended version Standard single open ended configurations are now available for retrofitting all kind of existing housings in the market: Option B : Code 7 with 226 O-ring. Option C : Code 8 with 222 O-ring. Option F : Code with 222 O-ring. Option R : Spring on top with or without flat gasket. The B, C, and F end caps are available with the following O-ring material : Silicone, Fluorocarbon, EPR, Nitrile, PTFE encapsulated Silicone, PTFE encapsulated Viton. c) Customized shapes and special sizes Special lengths up to 70 are available upon request. 2 Micro-Klean Filters for Air and Gas applications Entrained moisture oil and particles in air lines will jam pneumatic tools, clog nozzles and valves render air brakes inoperative and raise all kinds of troubles. The results are : interrupted production, workpiece spoilage, inaccurate gauging and high maintenance costs. Air line contamination exists with the humidity in the air brought in be the compressor, oil from the compressor, and with dirt and rust from the connections and pipes. If the pneumatic circuit is vital for the installation, it is necessary that the air stream be cleared of these contaminants. Removal of all moisture and particles by Micro-Klean cartridges is really positive and complete. Full protection of the circuit is assured when the filter is located as close to the point of use of air and gas as possible. To operate under satisfactory conditions, a circuit should also be equipped with a filter at the compressor. It will remove the excessive amounts of moisture and oil, and extend the life of smaller filters located at the point of use. Please refer to your M Purification representative for sizing Micro-Klean in gas applications.
Micro-Klean Waste management Micro-Klean cartridges contain no metal or plastic cores. They can be incinerated, shredded, or crushed after use to reduce overall disposal costs. Micro-Klean : rigid, graded density cartridge Note on housings M Purification offers a wide range of standard housings and engineered systems to meet your requirements. For further info on engineering capabilities, please contact us. Rigid graded density Micro-Klean Micro-Klean filter cartridges are manufactured using an exclusive proprietary process that achieves a true graded density fibre structure with a clean and smooth inside diameter. Each fibre is locked in this arrangement by a thermosetting resin binder to create a rigid structure, eliminating the need for a metal or plastic centre core. Larger particles are trapped in the outer area and finer particles towards the inner area. Figure 1 illustrates how in a graded-density structure the overall effect is to clarify and retain particles by size as they progress through the cartridge. Graded-Density Structure Micro-Klean : High surface area Micro-Klean cartridges also feature an optimised groove pattern that increases the surface area by over 65% when compared to smooth cylindrical cartridges (see Figure 2). The grooved surface prevents premature blinding of the outer surface by large particles and allows full utilization of the depth structure. Maximum surface area with a true graded density Micro-Klean can provide times or greater service life than competitive filter cartridges. Reproducible cost effective filtration Micro-Klean is manufactured to rigid specifications and subjected to stringent process and quality controls to ensure consistency in filtration performance and ultimately, end-user process consistency - run after manufacturing run. Figure 1: Graded density structure Grooved Surface Increase in Surface Area Figure 2 : Surface area comparison Ungrooved Surface Micro-Klean specifications Materials of construction MK Formulation Nominal Rating (μm) Available grades Fibres Resin 8 5 25 50 1 5 10 25 50 75 100 125 150 A B F L Y8 A8 B8 C8 F8 L8 Q8 V8 W8 X8 Operating parameters Maximum operating temperature * Standard: 120 C - Formulation and 8 * With polyethylene gasket: 9 C * With polypropylene bonds and end modifications: 82 C Maximum differential pressure: 4,8 bar @ 82 C Recommended change-out differential pressure: 2,4 bar /Glass /Rayon /Rayon /Rayon Phenolic Phenolic Flow rate : pressure drop data Nominal Rating Grade Specific ΔP, 10 Cartridge (mbar/lpm) Max. Aqueous Flow Rate/10 (lpm) 1 μm Y8 5.9 18.9 μm A8.71 18.9 5 μm B8 2.2 18.9 10 μm C8 1. 18.9 25 μm F8 0.65 22.7 50 μm L8 0.41 22.7 75 μm Q8 0.26 22.7 100 μm V8 0.17 0. 125 μm W8 0.07 0. 150 μm X8 0.06 0. μm A 2.78 18.9 5 μm B 1.48 18.9 25 μm F 1.19 22.7 50 μm L 0.72 22.7 Dimensions (nominal) Inside diameter: 26,9 mm (1 1/16 ) - Outside diameter: 65,9 mm (2 19/2 ) Cartridge length: from 248 to 1016 mm (9 ¾ through 40 ) Special length available on request.
Micro-Klean Micro-Klean Ordering Guide Standard Products: Range Finishing Cartridge Length Nominal Micron Rating Formulation * DOE or SOE version Gasket material MK G = Grooved DOE 78 = 9 ¾ 80 = 10 SOE 10 = 10 20 = 20 0 = 0 40 = 40 Y = 1 μm A = μm B = 5 μm C = 10 μm F = 25 μm L = 50 μm Q = 75 μm V = 100 μm W = 125 μm X = 150 μm = cellulose fibre & phenolic resin 8 = acrylic fibre & phenolic resin DOE length Module = 9 ¾ or 10 2 = 19 ½ or 20 = 29 ¼ or 0 4 = 9 or 40 SOE end cap B = Code 7 Pall (226 O-ring) C = Code 8 Pall (222 O-ring) F = Code Pall (222 O-ring) = no gasket NG = with flat Polyethylene Gasket O-ring material A = Silicone B = Fluorocarbon C = EPR D = Nitrile K = PTFE encapsulated viton X = PTFE encapsulated silicone R = Spring on top version N = no gasket G = with flat Polyethylene Gasket * Remark on available grades: Formulation : A, B, F, L Formulation 8: all grades available - Cartridges are packed in partitioned boxes and branded with the micron rating and formulation. Important Notice M Purification MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Since a variety of factors can affect the use and performance of a M Purification product in a particular application, some of which are uniquely within the user s knowledge and control, user is responsible for determining whether or not the M Purification product is fit for a particular purpose and suitable for user s method of application. Limitation of Remedies and Liability If the M Purification product is proved to be defective, THE EXCLUSIVE REMEDY, AT M Purification S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OR TO REPAIR OR REPLACE THE DEFECTIVE PRODUCT. M Purification shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty or strict liability. WARRANTY Seller warrants its equipment against defects in workmanship and material for a period of 12 months from date of shipment from the factory under normal use and service and otherwise when such equipment is used in accordance with instructions furnished by Seller and for purposes disclosed in writing at the time of purchase, if any. Any unauthorised alteration of modification of the equipment by Buyer will void this warranty. Seller s liability under this warranty shall be limited to the replacement or repair, F.O.B., point of manufacture, of any defective equipment or part which, having been returned to the factory, transportation charges prepaid, has been inspected and determined by Seller to be defective. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER. Under no circumstances shall Seller be liable to Buyer or any third party for any loss of profits or other direct or indirect costs, expenses, losses or consequential damages arising out of or as a result of any defects in or failure of its products or any part or parts thereof or arising out of or as a result of parts or components incorporated in Seller s equipment but not supplied by the Seller. M and Micro-Klean are trademarks of M used under licence. Lenntech info@lenntech.com Tel. +1-152-610-900 www.lenntech.com Fax. +1-152-616-289 For more contact addresses visit our website www.m.eu/filtration or www.mpurification.com/international. Data may be subject to change without further notice. M 2010. All rights reserved.
The below M Cuno Mikroklean G series cartridge filters are all the models that are potentially possible in all variations. Please note that not all models are actually produced or on stock and some model numbers and names have become obsolete. Nevertheless this should help as cross reference table chart for Cuno filters nomenclature. Micro Klean G series MKG78Y2NG MKG80Y2NG MKG10YBA MKG20YBA MKG0YBA MKG40YBA MKG40XBC MKG0Q8RN MKG10WCD MKG10FRG MKG78V8RN MKG80V8RN MKG78B8RN MKG78YNG MKG80YNG MKG10YBB MKG20YBB MKG0YBB MKG40YBB MKG40XBD MKG0Q8RG MKG10WCK MKG10LRN MKG78V8RG MKG80V8RG MKG78B8RG MKG78Y4NG MKG80Y4NG MKG10YBC MKG20YBC MKG0YBC MKG40YBC MKG40XBK MKG0V8RN MKG10WCX MKG10LRG MKG78W8RN MKG80W8RN MKG78C8RN MKG78A2NG MKG80A2NG MKG10YBD MKG20YBD MKG0YBD MKG40YBD MKG40XBX MKG0V8RG MKG10WFA MKG10QRN MKG78W8RG MKG80W8RG MKG78C8RG MKG78ANG MKG80ANG MKG10YBK MKG20YBK MKG0YBK MKG40YBK MKG40XCA MKG0W8RN MKG10WFB MKG10QRG MKG78X8RN MKG80X8RN MKG78F8RN MKG78A4NG MKG80A4NG MKG10YBX MKG20YBX MKG0YBX MKG40YBX MKG40XCB MKG0W8RG MKG10WFC MKG10VRN MKG78X8RG MKG80X8RG MKG78F8RG MKG78B2NG MKG80B2NG MKG10YCA MKG20YCA MKG0YCA MKG40YCA MKG40XCC MKG0X8RN MKG10WFD MKG10VRG MKG10YRN MKG10Y8RN MKG80B8RN MKG78BNG MKG80BNG MKG10YCB MKG20YCB MKG0YCB MKG40YCB MKG40XCD MKG0X8RG MKG10WFK MKG10WRN MKG10YRG MKG10Y8RG MKG80B8RG MKG78B4NG MKG80B4NG MKG10YCC MKG20YCC MKG0YCC MKG40YCC MKG40XCK MKG40Y8RN MKG10WFX MKG10WRG MKG10ARN MKG10A8RN MKG80C8RN MKG78C2NG MKG80C2NG MKG10YCD MKG20YCD MKG0YCD MKG40YCD MKG40XCX MKG40Y8RG MKG10XBA MKG10XRN MKG10ARG MKG10A8RG MKG80C8RG MKG78CNG MKG80CNG MKG10YCK MKG20YCK MKG0YCK MKG40YCK MKG40XFA MKG40A8RN MKG10XBB MKG10XRG MKG10BRN MKG10B8RN MKG80F8RN MKG78C4NG MKG80C4NG MKG10YCX MKG20YCX MKG0YCX MKG40YCX MKG40XFB MKG40A8RG MKG40VFB MKG10F8RG MKG10BRG MKG10B8RG MKG80F8RG MKG78F2NG MKG80F2NG MKG10YFA MKG20YFA MKG0YFA MKG40YFA MKG40XFC MKG0QRN MKG40VFC MKG10L8RN MKG10CRN MKG10C8RN MKG10FFA MKG78FNG MKG80FNG MKG10YFB MKG20YFB MKG0YFB MKG40YFB MKG40XFD MKG0QRG MKG40VFD MKG10L8RG MKG10CRG MKG10C8RG MKG10FFB MKG78F4NG MKG80F4NG MKG10YFC MKG20YFC MKG0YFC MKG40YFC MKG40XFK MKG0VRN MKG40VFK MKG10Q8RN MKG10LBK MKG20LBK MKG10FFC MKG78L2NG MKG80L2NG MKG10YFD MKG20YFD MKG0YFD MKG40YFD MKG40XFX MKG0VRG MKG40VFX MKG10Q8RG MKG10LBX MKG20LBX MKG10FFD MKG78LNG MKG80LNG MKG10YFK MKG20YFK MKG0YFK MKG40YFK MKG0XBC MKG0WRN MKG20BRG MKG10V8RN MKG10LCA MKG20LCA MKG10FFK MKG78L4NG MKG80L4NG MKG10YFX MKG20YFX MKG0YFX MKG40YFX MKG0XBD MKG0WRG MKG20CRN MKG10V8RG MKG10LCB MKG20LCB MKG10FFX MKG78Q2NG MKG80Q2NG MKG10ABA MKG20ABA MKG0ABA MKG40ABA MKG0XBK MKG0XRN MKG20CRG MKG10W8RN MKG10LCC MKG20LCC MKG20FFA MKG78QNG MKG80QNG MKG10ABB MKG20ABB MKG0ABB MKG40ABB MKG0XBX MKG0XRG MKG20FRN MKG10W8RG MKG10LCD MKG20LCD MKG20FFB MKG78Q4NG MKG80Q4NG MKG10ABC MKG20ABC MKG0ABC MKG40ABC MKG0XCA MKG40YRN MKG20FRG MKG10X8RN MKG10LCK MKG20LCK MKG20FFC MKG78V2NG MKG80V2NG MKG10ABD MKG20ABD MKG0ABD MKG40ABD MKG0XCB MKG40YRG MKG20LRN MKG10X8RG MKG10LCX MKG20LCX MKG20FFD MKG78VNG MKG80VNG MKG10ABK MKG20ABK MKG0ABK MKG40ABK MKG0XCC MKG40ARN MKG20LRG MKG10QBB MKG10LFA MKG20LFA MKG20FFK MKG78V4NG MKG80V4NG MKG10ABX MKG20ABX MKG0ABX MKG40ABX MKG0XCD MKG40ARG MKG20QRN MKG10QBC MKG10LFB MKG20LFB MKG20FFX MKG78W2NG MKG80W2NG MKG10ACA MKG20ACA MKG0ACA MKG40ACA MKG0XCK MKG0BRN MKG20B8RG MKG10QBD MKG10LFC MKG20LFC MKG0FFA MKG78WNG MKG80WNG MKG10ACB MKG20ACB MKG0ACB MKG40ACB MKG0XCX MKG0BRG MKG20C8RN MKG10QBK MKG10LFD MKG20LFD MKG0FFB MKG78W4NG MKG80W4NG MKG10ACC MKG20ACC MKG0ACC MKG40ACC MKG0XFA MKG0CRN MKG20C8RG MKG10QBX MKG10LFK MKG20LFK MKG0FFC MKG78X2NG MKG80X2NG MKG10ACD MKG20ACD MKG0ACD MKG40ACD MKG0XFB MKG0CRG MKG20F8RN MKG10QCA MKG10LFX MKG20LFX MKG0FFD MKG78XNG MKG80XNG MKG10ACK MKG20ACK MKG0ACK MKG40ACK MKG0XFC MKG0FRN MKG20F8RG MKG10QCB MKG0LBK MKG40LBK MKG0FFK MKG78X4NG MKG80X4NG MKG10ACX MKG20ACX MKG0ACX MKG40ACX MKG0XFD MKG0FRG MKG20L8RN MKG10QCC MKG0LBX MKG40LBX MKG0FFX MKG78Y82NG MKG80Y82NG MKG10AFA MKG20AFA MKG0AFA MKG40AFA MKG0XFK MKG0LRN MKG20L8RG MKG10QCD MKG0LCA MKG40LCA MKG40FFA MKG78Y8NG MKG80Y8NG MKG10AFB MKG20AFB MKG0AFB MKG40AFB MKG0XFX MKG0LRG MKG20Q8RN MKG10QCK MKG0LCB MKG40LCB MKG40FFB MKG78Y84NG MKG80Y84NG MKG10AFC MKG20AFC MKG0AFC MKG40AFC MKG20XBC MKG0B8RN MKG10QFX MKG10QCX MKG0LCC MKG40LCC MKG40FFC MKG78A82NG MKG80A82NG MKG10AFD MKG20AFD MKG0AFD MKG40AFD MKG20XBD MKG0B8RG MKG10VBA MKG20QBB MKG0LCD MKG40LCD MKG40FFD MKG78A8NG MKG80A8NG MKG10AFK MKG20AFK MKG0AFK MKG40AFK MKG20XBK MKG0C8RN MKG10VBB MKG20QBC MKG0LCK MKG40LCK MKG40FFK MKG78A84NG MKG80A84NG MKG10AFX MKG20AFX MKG0AFX MKG40AFX MKG20XBX MKG0C8RG MKG10VBC MKG20QBD MKG0LCX MKG40LCX MKG40FFX MKG78B82NG MKG80B82NG MKG10BBA MKG20BBA MKG0BBA MKG40BBA MKG20XCA MKG0F8RN MKG10VBD MKG20QBK MKG0LFA MKG40LFA MKG40FRN MKG78B8NG MKG80B8NG MKG10BBB MKG20BBB MKG0BBB MKG40BBB MKG20XCB MKG0F8RG MKG10VBK MKG20QBX MKG0LFB MKG40LFB MKG40FRG MKG78B84NG MKG80B84NG MKG10BBC MKG20BBC MKG0BBC MKG40BBC MKG20XCC MKG0L8RN MKG10VBX MKG20QCA MKG0LFC MKG40LFC MKG40LRN MKG78C82NG MKG80C82NG MKG10BBD MKG20BBD MKG0BBD MKG40BBD MKG20XCD MKG0L8RG MKG10VCA MKG20QCB MKG0LFD MKG40LFD MKG40LRG MKG78C8NG MKG80C8NG MKG10BBK MKG20BBK MKG0BBK MKG40BBK MKG20XCK MKG10WBA MKG20QFX MKG20QCC MKG0LFK MKG40LFK MKG40QRN MKG78C84NG MKG80C84NG MKG10BBX MKG20BBX MKG0BBX MKG40BBX MKG20XCX MKG10WBB MKG20VBA MKG20QCD MKG0LFX MKG40LFX MKG40QRG MKG78F82NG MKG80F82NG MKG10BCA MKG20BCA MKG0BCA MKG40BCA MKG20XFA MKG10WBC MKG20VBB MKG20QCK MKG40XRN MKG10VCB MKG20V8RN MKG78F8NG MKG80F8NG MKG10BCB MKG20BCB MKG0BCB MKG40BCB MKG20XFB MKG10WBD MKG20VBC MKG20QCX MKG40XRG MKG10VCC MKG20V8RG MKG78F84NG MKG80F84NG MKG10BCC MKG20BCC MKG0BCC MKG40BCC MKG20XFC MKG10WBK MKG20VBD MKG0QBB MKG40WCC MKG10VCD MKG20W8RN MKG78L82NG MKG80L82NG MKG10BCD MKG20BCD MKG0BCD MKG40BCD MKG20XFD MKG10WBX MKG20VBK MKG0QBC MKG40WCD MKG10VCK MKG20W8RG MKG78L8NG MKG80L8NG MKG10BCK MKG20BCK MKG0BCK MKG40BCK MKG20XFK MKG10WCA MKG20VBX MKG0QBD MKG40WCK MKG10VCX MKG20X8RN MKG78L84NG MKG80L84NG MKG10BCX MKG20BCX MKG0BCX MKG40BCX MKG20XFX MKG10WCB MKG20VCA MKG0QBK MKG40WCX MKG10VFA MKG20X8RG MKG78Q82NG MKG80Q82NG MKG10BFA MKG20BFA MKG0BFA MKG40BFA MKG10XBC MKG20WBA MKG0QFX MKG0QBX MKG40WFA MKG10VFB MKG20BRN MKG78Q8NG MKG80Q8NG MKG10BFB MKG20BFB MKG0BFB MKG40BFB MKG10XBD MKG20WBB MKG0VBA MKG0QCA MKG40WFB MKG10VFC MKG20Y8RN MKG78Q84NG MKG80Q84NG MKG10BFC MKG20BFC MKG0BFC MKG40BFC MKG10XBK MKG20WBC MKG0VBB MKG0QCB MKG40WFC MKG10VFD MKG20Y8RG MKG78V82NG MKG80V82NG MKG10BFD MKG20BFD MKG0BFD MKG40BFD MKG10XBX MKG20WBD MKG0VBC MKG0QCC MKG40WFD MKG10VFK MKG20A8RN MKG78V8NG MKG80V8NG MKG10BFK MKG20BFK MKG0BFK MKG40BFK MKG10XCA MKG20WBK MKG0VBD MKG0QCD MKG40WFK MKG10VFX MKG20A8RG MKG78V84NG MKG80V84NG MKG10BFX MKG20BFX MKG0BFX MKG40BFX MKG10XCB MKG20WBX MKG0VBK MKG0QCK MKG40WFX MKG20VCB MKG20B8RN MKG78W82NG MKG80W82NG MKG10CBA MKG20CBA MKG0CBA MKG40CBA MKG10XCC MKG20WCA MKG0VBX MKG0QCX MKG40XBA MKG20VCC MKG0VCB MKG78W8NG MKG80W8NG MKG10CBB MKG20CBB MKG0CBB MKG40CBB MKG10XCD MKG20WCB MKG0VCA MKG40QBB MKG40XBB MKG20VCD MKG0VCC MKG78W84NG MKG80W84NG MKG10CBC MKG20CBC MKG0CBC MKG40CBC MKG10XCK MKG0WBA MKG40QFX MKG40QBC MKG10QFK MKG0VCX MKG0VCD MKG78X82NG MKG80X82NG MKG10CBD MKG20CBD MKG0CBD MKG40CBD MKG10XCX MKG0WBB MKG40VBA MKG40QBD MKG20QFA MKG0VFA MKG0VCK MKG78X8NG MKG80X8NG MKG10CBK MKG20CBK MKG0CBK MKG40CBK MKG10XFA MKG0WBC MKG40VBB MKG40QBK MKG20QFB MKG0VFB MKG40QFK MKG78X84NG MKG80X84NG MKG10CBX MKG20CBX MKG0CBX MKG40CBX MKG10XFB MKG0WBD MKG40VBC MKG40QBX MKG20QFC MKG0VFC MKG20WCC MKG78YRN MKG80YRN MKG10CCA MKG20CCA MKG0CCA MKG40CCA MKG10XFC MKG0WBK MKG40VBD MKG40QCA MKG20QFD MKG0VFD MKG0A8RN MKG78YRG MKG80YRG MKG10CCB MKG20CCB MKG0CCB MKG40CCB MKG10XFD MKG0WBX MKG40VBK MKG40QCB MKG20QFK MKG40QFD MKG0A8RG MKG78ARN MKG80ARN MKG10CCC MKG20CCC MKG0CCC MKG40CCC MKG10XFK MKG0WCA MKG40VBX MKG40QCC MKG0QFA MKG20VCK MKG20WCD MKG78ARG MKG80ARG MKG10CCD MKG20CCD MKG0CCD MKG40CCD MKG10XFX MKG0WCB MKG40VCA MKG40QCD MKG0QFB MKG0WCC MKG20WCK MKG78BRN MKG80BRN MKG10CCK MKG20CCK MKG0CCK MKG40CCK MKG40B8RN MKG40WBA MKG20WFB MKG40QCK MKG0QFC MKG40QBA MKG20WCX MKG78BRG MKG80BRG MKG10CCX MKG20CCX MKG0CCX MKG40CCX MKG40B8RG MKG40WBB MKG20WFC MKG40QCX MKG0QFD MKG0QBA MKG20WFA MKG78CRN MKG80CRN MKG10CFA MKG20CFA MKG0CFA MKG40CFA MKG40C8RN MKG40WBC MKG20WFD MKG0WCD MKG0QFK MKG20QBA MKG10QFC MKG78CRG MKG80CRG MKG10CFB MKG20CFB MKG0CFB MKG40CFB MKG40C8RG MKG40WBD MKG20WFK MKG0WCK MKG40QFA MKG10QBA MKG10QFD MKG78FRN MKG80FRN MKG10CFC MKG20CFC MKG0CFC MKG40CFC MKG40F8RN MKG40WBK MKG20WFX MKG0WCX MKG40QFB MKG10F8RN MKG78L8RN MKG78FRG MKG80FRG MKG10CFD MKG20CFD MKG0CFD MKG40CFD MKG40F8RG MKG40WBX MKG20XBA MKG0WFA MKG40QFC MKG10FRN MKG78L8RG MKG78LRN MKG80LRN MKG10CFK MKG20CFK MKG0CFK MKG40CFK MKG40L8RN MKG40WCA MKG20XBB MKG0WFB MKG80L8RN MKG10LBA MKG78Q8RN MKG78LRG MKG80LRG MKG10CFX MKG20CFX MKG0CFX MKG40CFX MKG40L8RG MKG40WCB MKG10WCC MKG0WFC MKG80L8RG MKG10LBB MKG78Q8RG MKG78QRN MKG80QRN MKG10FBA MKG20FBA MKG0FBA MKG40FBA MKG40Q8RN MKG20QRG MKG0VFK MKG0WFD MKG80Q8RN MKG10LBC MKG10QFB MKG78QRG MKG80QRG MKG10FBB MKG20FBB MKG0FBB MKG40FBB MKG40Q8RG MKG20VRN MKG0VFX MKG0WFK MKG80Q8RG MKG10LBD MKG0Y8RG MKG78VRN MKG80VRN MKG10FBC MKG20FBC MKG0FBC MKG40FBC MKG40V8RN MKG20VRG MKG40VCB MKG0WFX MKG20LBA MKG0LBA MKG20VFX MKG78VRG MKG80VRG MKG10FBD MKG20FBD MKG0FBD MKG40FBD MKG40V8RG MKG20WRN MKG40VCC MKG0XBA MKG20LBB MKG0LBB MKG20ARG MKG78WRN MKG80WRN MKG10FBK MKG20FBK MKG0FBK MKG40FBK MKG40W8RN MKG20WRG MKG40VCD MKG0XBB MKG20LBC MKG0LBC MKG20Q8RG MKG78WRG MKG80WRG MKG10FBX MKG20FBX MKG0FBX MKG40FBX MKG40W8RG MKG20XRN MKG40VCK MKG20VCX MKG20LBD MKG0LBD MKG40CRG MKG78XRN MKG80XRN MKG10FCA MKG20FCA MKG0FCA MKG40FCA MKG40X8RN MKG20XRG MKG40VCX MKG20VFA MKG40LBA MKG40VRN MKG40FCX MKG78XRG MKG80XRG MKG10FCB MKG20FCB MKG0FCB MKG40FCB MKG40X8RG MKG0YRN MKG40VFA MKG20VFB MKG40LBB MKG40VRG MKG0FCX MKG78Y8RN MKG80Y8RN MKG10FCC MKG20FCC MKG0FCC MKG40FCC MKG40BRN MKG0YRG MKG20YRN MKG20VFC MKG40LBC MKG40WRN MKG20FCX MKG78Y8RG MKG80Y8RG MKG10FCD MKG20FCD MKG0FCD MKG40FCD MKG40BRG MKG0ARN MKG20YRG MKG20VFD MKG40LBD MKG40WRG MKG10FCX MKG78A8RN MKG80A8RN MKG10FCK MKG20FCK MKG0FCK MKG40FCK MKG40CRN MKG0ARG MKG20ARN MKG20VFK MKG0Y8RN MKG10QFA MKG80A8RG MKG78A8RG Lenntech B.V. Rotterdamseweg 402 2629HH Delft Netherlands T +1 15 261.09.00 F +1 15 261.62.89 info@lenntech.com www.lenntech.com