DETERGENT POWDER & CAKE

Similar documents
MINERAL GRINDING. NIC Code:.. Profile No.: INTRODUCTION 2. PRODUCTS AND ITS APPLICATION 3. DESIRED QUALIFICATION FOR PROMOTER

PLASTIC BOTTLES (PET)

DRIP IRRIGATION PIPE

BOPP SELF ADHESIVE TAPE

Profile No.: 32 NIC Code: CORRUGATED BOXES

PVC WIRE AND CABLE COATING

FLYASH BRICKS 1. INTRODUCTION 2. PRODUCTS AND ITS APPLICATION. Profile No.: 17 NIC Code: 23921

Profile No.: 57 NIC Code: PLASTIC CARRY BAGS

Profile No.: 62 NIC Code: BUBBLE PACKING. The major areas of application are segregated into the following fields.

Profile No.: 40 NIC Code: CASEIN FROM MILK

Profile No.: 63 NIC Code: HDPE PIPES

SPRAY DRIED FOOD F&V POWDERS, FAT POWDERS

PLASTER OF PARIS. Profile No.: 57 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION:

CLEANING, GRADING & SORTING OF AGRO COMMODITES

STONE CRUSHER. Profile No.: 60 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION:

CEMENT PAINTS. Profile No.: 43 NIC Code: INTRODUCTION:

LAMINATED FLEXIBLE PACKAGING

PRECAST CEMENT PRODUCTS

Profile No.: 35 NIC Code: SURGICAL BANDAGES. The project proposes to produce Surgical Bandages with capacity of 6.00 lac meters per annum.

FROZEN FOODS: CURRIED VEG, PAROTHA, SNACKS

WIRE DRAWING. Profile No.: 12 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION:

Profile No.: 4 NIC Code: ELECTRICAL CABLES (SINGLE AND MULTICORE)

JAGGERY FROM SUGARCANE

Acid Slurry (ALKYL Benzene Sulphonate)

WROUGHT IRON FURNITURE

PROJECT PROFILE ON BISCUIT INDUSTRY

CATTLE & POULTRY FFEDS

PHARMACEUTICAL FORMULATION UNIT (TABALATES AND CAPSULES)

Sugar Globules INTRODUCTION MARKET POTENTIAL IMPLEMENTATION SCHEDULE

GINGER & GARLIC PROCESSING

Agarbatti(IncenseStick)Manufacturing

1 TOMATO PUREE, SAUCE AND KETCHUP. 1.1 Introduction

TOOL ROOM FOR SHEET METAL DIES

Plastic Moulded Luggage

KARAMCHA PROCESSING 1.0 PRODUCT AND ITS APPLICATIONS 2.0 MARKET POTENTIAL 3.0 BASIS AND PRESUMPTIONS 4.0 IMPLEMENTATION SCHEDULE 5.0 TECHNICAL ASPECTS

COST SHEET. Samir K Mahajan

DEHULLED SESAME SEED

RICE CRISPIES Introduction Market Packaging Production capacity

COCONUT SHELL POWDER

E-DIRECTORY FOR UTILITIES AND SERVICES

Question Paper Accounting For Decision Making - II (MB2D2): January 2009

Women and Men Operators of Enterprises in India s Informal Sector

Business opportunities in Food Sector September 30th, 2014

The demand for the bricks will increase in line with the demand for construction.

UNIT 2 : FINAL ACCOUNTS OF MANUFACTURING ENTITIES

Project Proposal for manufacture of Potato Chips

PAPADS Introduction Market Packaging Production capacity Sales revenue Production process outline.

WOOD SCREWS. Bureau of Indian Standards has laid down specifications for wood screws in IS-451

1. What are the different parameters used to measure the size of business?

Cleaner ProduCtion in TexTile industry

No.RID/KRDP/MLP-BC/207/ Date: Sub: Guidelines for Implementation of Benefit Chart

2.2 Availability of know-how and Compliances DFRL, Mysore, has successfully developed the technical know-how. Compliance with PFA Act is mandatory.

Time: 60 Minutes Record : 10 Skill Test : 20 Total Marks : 30 Note: Problems are to be solved by using computers (Excel or any accounting package).

Indian Plywood and Laminates Market: Trends and Opportunities ( ) April 2015

Cement Concrete Tiles and Paving Blocks

CHAPTER 11: PROSPECTS OF THE SMALL SCALE AGRO-PROCESSING INDUSTRY IN THE AHMEDNAGAR DISTRICT

Full PVC Footwear. QUALITY AND STANDARDS : (1) PVC Sandals IS 2167:1972 (2) PVC Industrial Boots IS 12254:1993

Indian Technical Textile Industry : Current Scenario & Opportunities

PLASTIC DOORS INTRODUCTION

COST SHEET. Samir K Mahajan

BLOW MOULDED CONTAINERS

2017 Accounting. Higher. Finalised Marking Instructions

Auto Tubes and Flaps

PROJECT PROFILE FOR MANUFACTURE OF AGRICULTURAL IMPLEMENTS

REVISION: MANUFACTURING 12 SEPTEMBER 2013

PUFFED RICE Introduction Market Packaging Production capacity 5. Sales revenue 6. Production process outline.

Introduction to Cost Accounting. Samir K Mahajan

AAMCHUR (DRIED MANGO POWDER)

4. PROFILE ON GRANITE CUTTING

INSTANT / READY TO EAT NOODLES MANUFACTURING

Introduction to Cost Accounting. Samir K Mahajan

AC 3379-ab M. Phil. (Com.) Examination April / May 2003 Accountancy : Paper III (New & Old Course)

MARGINAL COSTING CATEGORY A CHAPTER HIGH MARKS COVERAGE IN EXAM

Introduction to Cost Accounting. Samir K Mahajan

Overheads/Job and Batch Costing. RST Ltd. has two production departments Machining and Finishing. There are three service

INDIVIDUAL QUICK FREEZING OF FRUITS AND VEGETABLES

COST OF GOODS MANUFACTURED & SOLD STATEMENT

Gujarat Chamber of Commerce & Industry GCCI MSME Excellence Awards Application Form

Corporate Overview - MOL

Micro, Small and Medium Enterprises (MSME)- An Indian Perspective

PAPAIN 1.0 PRODUCT AND ITS APPLICATIONS 2.0 MARKET POTENTIAL 3.0 BASIS AND PRESUMPTIONS 4.0 IMPLEMENTATION SCHEDULE

Decision Making Using Cost Concepts and CVP Analysis

PROJECT PROFILE PRODUCT CODE , ASICC-44906

6-2 TABLE OF CONTENTS I. SUMMARY 6-3 II. PRODUCT DESCRIPTION 6-3 III. MARKET STUDY AND FARM CAPACITY 6-4 A. MARKET STUDY 6-4

COST CONCEPTS IN DECISION MAKING

Multiskilling & Certification Centre for Chemical Sector

TOMATO SAUCE, KETCHUP AND PUREE

PROJECT PROFILE ON HACKSAW BLADE MANUFACTURING

Plastics Machinery Manufacturers Association of India. Make in India Workshop 29 th Dec 2014

SECTION I. Sh ,000 10,200 16,680 14,000 2,600 4,200 13,300 2,520 1,600 10,500 12, ,000

AKASH SCHOOL OF BUSINESS & TRAINING

Multilayer Film. 2 LL/HD/LL Industrial base food oil, backed confectionery, dry vegetables, dry unit, hydrogenated oil, lube oil

FLAKED CEREALS Introduction Market Packaging Production capacity Sales revenue Production process outline.

B.Com II Year (Hons.) Cost Accounting Model Paper I

TOMATO SAUCE MANUFACTURING UNIT

Project Profile PULSE MILL

Nirvana s Dairy Project. Mini Dairy Plant From 1000LPD to 5000LPD

THE INDIAN COMMUNITY SCHOOL, KUWAIT

AGENDA: JOB-ORDER COSTING

1. Cost accounting involves the measuring, recording, and reporting of: A. product costs. B. future costs. C. manufacturing processes.

Transcription:

Profile No.: 18 NIC Code: 20233 DETERGENT POWDER & CAKE 1. INTRODUCTION Washing materials are made from different types of natural and synthetic raw materials. Soaps derived from vegetable oils were used traditionally for centuries. However, shortage of vegetable oils, need for better cleaning material for variety of fabrics and to reduce the cost, synthetic cleaning materials came in big way in 1960s and till it dominates the market. Detergent powder & cake have now become very popular in India due to better cleaning properties, reduce cost, ease of application and possibility of mass production. They are formulated using synthetic forming material (acid slurry), soda ash, fillers, etc. Moreover, detergents work well with hard water which is a problem in many parts of the country. 2. PRODUCTS AND ITS APPLICATION Synthetic detergent in powder form is widely used in household cleaning of cloth and other articles. Detergent powder can be formulated to suit washing machine application. Detergent cake is marketed as detergent material in India due to century old practice of washing cloth using soap bar. It has somewhat different formulations than powder.however, main ingredients remain same. In cake form it is easy to use and transport. Synthetic detergent is not only used as household cleaning material but also have industrial applications in textiles, pesticide industry as carriers, etc.

3. DESIRED QUALIFICATION FOR PROMOTER The promoter may have experience in production & marketing of washing material. It is important to have strong distribution network in the city and rural areas. It is not necessary to have chemical background for the promoter as technical knowhow is easily available in the market. 4. INDUSTRY OUTLOOK/TREND Domestic and industrial cleaning products market is growing day by day with increase in per capita income, product innovations by manufacturers, awareness amongst consumers and Government mission on Swatch Bharat. The trend in the market is to replace natural vegetable oil based cleaning material with synthetic materials for better cleaning properties and reduced cost. Cleaning products market is growing at the rate of 5% per annum in India. 5. MARKET POTENTIAL AND MARKETING ISSUES, IF ANY The detergent market in India consists of two major categories- the hand-wash and the machine-wash categories. Powder detergents and bar-detergent form a major portion of the hand-wash segment. However, in the machine-wash segment, the powder detergents and liquid detergents are the main types. Total market of synthetic detergents was valued at about Rs.150 billion as of 2015-16 with a compounded annual growth rate (CAGR) of 3%. Also, the hand-wash detergents have shown an impressive growth rate of 3.3% CAGR since 2010, which has contributed to the growth in the overall detergent market. In India, mainly there are two types of players in washing material. One in the small & cottage scale making formulated detergent materials, heavy in weight, improper mixing of ingredients & low cost. Against this, there are big players having sprayed dried materials, light in weight, high in cost & uniformly distributed ingredients in the final

products. Same is the scenario in detergent cake. The market for synthetic detergent powder and cake is increasing day by day with increase in population, per capita income and awareness for cleanliness & hygiene. For new players, they may concentrate on the local market in the initial period and develop brand image. 6. RAW MATERIAL REQUIREMENTS The main raw materials required for the manufacturing of detergent powder & cake are acid slurry, soda ash, soda bicarb, sodium tripolyphosphate, soap stone, sodium silicate, sodium sulphate, synthetic dye etc. All these raw materials are produced & available in major parts of India without any difficulty. The choice of raw material and formula may vary according to the market condition and affordability of the consumers. 7. MANUFACTURING PROCESS For detergent powder, first of all powder raw materials are screened in the required quantity and mixed uniformly. After this, acid slurry with dye is slowly poured on the mixture and mixed in a ribbon blender. The machine is run for about 15 minutes and then material is taken out, screened if required and packed in plastic bag. For the production of detergent cake, required powder raw materials are mixed and then acid slurry with water and dye is poured in a mixture and then extruded in the form of continuous bar and cut in the required size. Alternatively, to reduce the investment, individual bar can be stamped in a hand operative stamping machine. The cake is wrapped in a paper and sealed. 8. MANPOWER REQUIREMENT For the production of Detergent Powder and cake following category of manpower will be required for day to day production. Annual wages are also worked out.

Sr.No. Designation of Employees Manpower requirement Monthly Salary Number of employees required Annual cost. in lacs 1 Skilled Worker 7,000 5 4.20 2 Unskilled Worker 5,000 10 6.00 3 Production Manager 15,000 1 1.80 4 Supervisor 10,000 3 3.60 5 Purchase Officer 8,000 1 0.96 6 Accountant 8,000 1 0.96 7 Sales Man 8,000 3 2.88 8 Peon 5,000 1 0.60 9 Technician 6,000 1 0.72 Total 26 21.72 9. IMPLEMENTATION SCHEDULE This project can be easily implemented in four months if ready land & building are purchased and financing arrangements are made in time. The equipments are easily available with a short delivery period. 10. COST OF PROJECT The cost of project as per market rate of factory building, machinery, miscellaneous items, working capital margin and preliminary and pre-operative expenses works out as under: Cost of Project Sr. No. Particulars in Lacs 1 Land 110.00 2 Building 34.00 3 Plant & Machinery 50.20 4 Furniture, Electrical Installations 13.00 5 Other Assets including Preliminary / Pre-operative expenses 8.00 6 Margin for Working Capital 11.06 Total 226.26

11. MEANS OF FINANCE Based on the present norms of the bank, means of finance is worked out as under. Means of Finance Sr. No. Particulars in Lacs 1 Promoter's contribution 90.50 2 Bank Finance 135.76 Total 226.26 12. WORKING CAPITAL CALCULATION Working capital required for storage of raw materials and finished goods, monthly overheads, goods in process, receivables and trade credit is worked out based on the present norms of the bank as under. Working Capital Calculations Sr. No. Particulars Gross Amt. Margin % Margin Amt. Bank Finance 1 Inventories 6.71 30% 2.01 4.70 2 Receivables 24.38 30% 7.31 17.06 3 Overheads 1.73 100% 1.73-4 Creditors - 30% - - Total 32.82 11.06 21.76 13. LIST OF MACHINERY REQUIRED AND THEIR MANUFACTURERS For the production of detergent powder and cake main equipment required is Ribbon Blender, Vibrating Screen, Detergent Cake Machine, Packing Machine for Detergent Powder and Cake, Weighing Scale, Laboratory Equipment, Material Handling Equipment

RAMESHWAR STEEL FAB 7 Ram Industrial Park, Near Panchratana estate, Ramol Cross Road, Vatva, Ahmedabad RISING INDUSTRIES Tanushree Apartment (Ground Floor), Jhowtala, Hatiara, Near LokenathMandir Ghosh Dutta Para, Opposite Of Honda Service Center, Kolkata Novochem Engineering India LLP Block A, Pochanpur Colony, Dwarka, New Delhi 14. PROFITABILITY CALCULATIONS The profitability is worked out as under after taking into account all variable and fixed expenses as under. Profitability Calculation Sr. No. Particulars Year 1 Year 2 Year 3 Year 4 Year 5 1 Sales 204.75 234 263.25 263.25 263.25 2 Raw Materials & Other direct inputs 146.363 167.272 188.181 188.181 188.181 3 Gross Margin 58.387 66.728 75.069 75.069 75.069 4 Overheads except interest 14.546 16.624 18.702 18.702 18.702 5 Interest 12.432 14.208 15.984 15.984 15.984 6 Depreciation 6.454 7.376 8.298 8.298 8.298

7 Net Profit before tax 24.948 28.512 32.076 32.076 32.076 15. BREAKEVEN ANALYSIS The Break-Even point as percentage of targeted sales works out as under. Cash Break-Even (as % of Targeted sales) Sr. No. Particulars UOM Value 1 Sales Realization. In Lacs 292.50 2 Variable costs. In Lacs 209.09 3 Fixed costs incl. interest. In Lacs 38.55 4 BEP = FC/SR-VC x 100 = % of sales 46.21% 16. STATUTORY/ GOVERNMENT APPROVALS There is no specific statutory requirement for Cleaning material industry. However, MSME & GST registration, IEC Code for Export of end products and local authority clearance may be required for Shops and Establishment, for Fire and Safety requirement and registration for ESI, PF and Labour laws may be required if applicable. Entrepreneur may contact State Pollution Control Board where ever it is applicable. 17. BACKWARD AND FORWARD INTEGRATION Acid slurry is basic and important raw material for the production of detergent powder. As backward integration, promoter can think of making acid slurry for captive consumption with an investment of rupees two lakhs. Products similar to detergent powder are liquid detergent and cake. These can taken up as forward integration once the main products is stabilized in the market.

18. TRAINING CENTERS/COURSES For detergent powder and cake technical training, promoter may look for Khadi and Village Industries Training Institutes set up by state governments and KVIC, Mumbai. There is specialized institute for cleaning products training namely Diamond Jubilee Institute, Vadodara, Gujarat. Udyamimitra portal ( link : www.udyamimitra.in ) can also be accessed for handholding services viz. application filling / project report preparation, EDP, financial Training, Skill Development, mentoring etc. Disclaimer: Only few machine manufacturers are mentioned in the profile, although many machine manufacturers are available in the market.the addresses given for machinery manufacturers have been taken from reliable sources, to the best of knowledge and contacts. However, no responsibility is admitted, in case any inadvertent error or incorrectness is noticed therein. Further the same have been given by way of information only and do not carry any recommendation.