Part Numbers: SA-12C Hazard Rating: Health: 1 Fire: 4 Reactivity: EISENHOWER LANE NORTH LOMBARD, IL 60148

Similar documents
Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

Material Safety Data Sheet Whisk Hand Cleaner 200. Page 1 Whisk Products, Inc. Revised: November 24, 2014

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

OFF! INSECT REPELLENT II - FRESH SCENT

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Titanium Dioxide % - 5% 10 mg/m3 15 mg/m3

OFF! DEEP WOODS INSECT REPELLENT V

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet

Page 1 of 5 Premium Interior Sound-Reduction Coating Issue date: 4/12

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Chemical Name: Contact Cement. Manufacturer: Ace. Container size:.473l. Location: VLA. Disposal: Place empty container in trash.

Material Safety Data Sheet

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet Hot Stix

MATERIAL SAFETY DATA SHEET

HOJA DE SEGURIDAD DE PRODUCTO

M A T E R I A L S A F E T Y D A T A S H E E T

Dynatex Anti-Seize & Lubricating Compound. Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

M A T E R I A L S A F E T Y D A T A S H E E T

Revision Number: Issue date: 10/04/ PRODUCT AND COMPANY IDENTIFICATION. IDH number: HAZARDS IDENTIFICATION

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

: BON AMI POWER FOAM GLASS CLEANER

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET I. CHEMICAL PRODUCT. REVISED: March 16, 2005 FOAM-X II. COMPOSITION, INFORMATION OR INGREDIENTS

M A T E R I A L S A F E T Y D A T A

Section 1 - Identification of Product. Health: 2 Least 0 Flammability: 3 Slight 1 Reactivity: 0 Moderate 2 High 3 Extreme 4

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet RUST VETO 4214-W

Material Safety Data Sheet

Material Safety Data Sheet

Raid Flying Insect Killer 8

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET E Coast Hwy #143 Corona Del Mar CA United States of America

MATERIAL SAFETY DATA SHEET. Product Codes: CR-0356, CR-0356-CA, CR-0357, CR-0357-CA, CR-0359, CR-0359-CA, CR-0701, CR-0701-CA, CR-0705, CR-0705-CA

Material Safety Data Sheet

GLADE SENSE & SPRAY - APPLE CINNAMON

RAID MAX SPIDER & SCORPION KILLER

Safety Data Sheet. Dynatex Copper Anti-Seize & Lubricating Compound. Section 1. Identification. Section 2. Hazards Identification.

Material Safety Data Sheet

Material Safety Data Sheet

U.S. SAFETY DATA SHEET Howes Lubricator Diesel Treat Page 1 of 6

Product Name: PUNCTURE SEAL INSTANT TIRE REPAIR (UPC: )

Product Dynatex Anti-Seize & Lubricating Compound. Trade Name of this Product Dynatex Anti-Seize & Lubricating Compound

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

RAID WASP & HORNET KILLER 33

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

PLEDGE PROTECTION PLUS+ FURNITURE POLISH - CLEAN SCENT

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Revision Number: Issue date: 09/12/ PRODUCT AND COMPANY IDENTIFICATION. IDH number: Telephone: Emergency Telephone:

Material Safety Data Sheet

RAID SPIDER BLASTER BUG KILLER

Material Safety Data Sheet

MSDS ORDER NO: RELEASE NO: MSDS NO: B A R N E S D I S T R I B U T I O N. Synonyms: KP MATERIAL SAFETY DATA SHEET KP

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET WYNN'S PROFESSIONAL PRODUCTS AUTOMATIC TRANSMISSION FLUSH

M A T E R I A L S A F E T Y D A T A

1. Chemical Product and Company Identification. 2. Hazardous Ingredients

Safety Data Sheet (SDS)

HENKEL CONSUMER ADHESIVES 04/25/07 rev 10/13/09 AVON, OH TELEPHONE: (440) MATERIAL SAFETY DATA SHEET Page 01 of 05

MATERIAL SAFTEY DATA SHEET

Barristo Enterprises, Inc. dba SureHold

Material Safety Data Sheet

Transcription:

SAF-T-LOK International Corporation Material Safety Data Sheet SAF-T-EZE COPPER ANTI-SEIZE AEROSOL Issue Date: 10/19/17 SECTION I - PRODUCT AND COMPANY INFORMATION Product Name: COPPER ANTI-SEIZE AEROSOL Product Type: Lubricating Grease Part Numbers: 84556 SA-12C Hazard Rating: Health: 1 Fire: 4 Reactivity: 0 Company Identification: SAF-T-LOK International Corporation 300 EISENHOWER LANE NORTH LOMBARD, IL 60148 Contact: Chris Michaels Telephone/ Fax: (630) 495-2001 Emergency Phone (24 Hour): (703) 527-3887 Chemtrec (24 Hour): (800) 424-9300, (703) 527-3887 Preparer: Ind. Hygiene Department Internet: www.saftlok.com Product Class: DOT Hazard Class: Shipping Name: Mixture Aerosols SECTION II - INGREDIENT AND HAZARD INFORMATION Components Percent ACGIH TLV OSHA PEL Petroleum distillates 40-60 5 mg/m 3 TWA (mist) 5 mg/m 3 TWA (mist) 64742-52-5 10 mg/m 3 STEL (mist) Copper 10-20 2.0 mg/m 3 TWA 1 mg/m 3 TWA 7440-50-8 Graphite 15-30 2 mg/m 3 TWA 15 mg/m 3 TWA 7782-42-5 Butane 10-30 1000 ppm TWA 800 ppm TWA 106-97-8 Propane 10-30 1000 ppm TWA 1000 ppm TWA 74-98-6 SECTION III - HAZARD IDENTIFICATION AND EMERGENCY OVERVIEW EMERGENCY OVERVIEW Physical appearance: Aerosol HMIS Physical color: Copper Health: 1 Odor: Mild / Solvent Flammability: 4 Reactivity: 0 Personal Protection: B Page 1 of 5

WARNING: Relative routes of entry: EXTREMELY FLAMMABLE CONTENTS UNDER PRESSURE MAY CAUSE: EYE IRRITATION SKIN IRRITATION HARMFUL IF INHALED MAY IRRITATE EXISTING ALLERGIC SKIN CONDITIONS Skin, Eyes, Ingestion Skin Contact: Usually no effect, however, as with any chemical, prolonged, excessive, or repeated exposure may cause mild to moderate skin irritation, exhibited by redness, drying and cracking of unprotected skin. Eye Contact: May irritate with slight pain and redness. Flush eyes with water for at least 15 minutes. Respiratory/ Inhalation: May cause irritation to nose and throat. Overexposure may cause central nervous system depression, including dizziness, drowsiness, fatigue, nausea, headache, or unconsciousness. Extreme overexposure may result in unconsciousness and possibly death. Ingestion: Amounts transferred to mouth by fingers, etc, during normal operation should not cause injury. Medical conditions generally aggravated by exposure: None known, however any chemical product may enhance allergies already present in certain individuals. SECTION IV FIRST AID INSTRUCTIONS Skin Contact: Remove contaminated clothing. Wash affected area with soap and rinse with plenty of water. Get medical attention if symptoms occur. Wash clothing before reuse. Eye Contact: Flush with water for at least 15 minutes holding eyelid open. Get medical attention if symptoms persist. Respiratory / Inhalation: Remove to fresh air, if symptoms develop get medical attention. Ingestion: Do not induce vomiting. Obtain medical attention if symptoms develop. SECTION V FIRE FIGHTING INSTRUCTIONS Flash Point: Unusual Fire and Explosion Hazards: Flammable Limits: Extinguishing Media: Fire Fighting Procedures: -40 C (T.C.C.) (Propellant) Contents under pressure. Do not store or use near heat, spark, or open flame. Do not puncture or incinerate pressurized containers. Exposure to temperatures above 49 C (120 F) may cause container to burst. LEL:, UEL: Carbon Dioxide, Foam, Dry Chemicals Air mask and procedures for fighting chemical fires. Do not inhale gases. SECTION VI -ACCIDENTAL RELEASE MEASURES Special Precautions: Environmental precautions: Clean up methods: Remove sources of ignition. Ventilate area. Prevent material from entering floor drains, sewers, or any bodies of water. Scoop up into waste container or soak up with absorbent material. Store in a closed container until disposal. Dispose of material according to regulations. Page 2 of 5

SECTION VII - HANDLING AND STORAGE Handling: Storage: Personal Protection: Avoid contact with eyes, skin, and clothing. Avoid breathing vapors. Wash hands thoroughly at mealtime and end of shift. Keep away from heat, spark, and flame. Do not puncture or incinerate. Isolated storage facility/ warehouse not required. Store in a cool, dry location (60-90 F) in a well-ventilated area in original container. Keep container tightly closed when not in use. Wear personal protective equipment as outlined in Section VIII of this MSDS. SECTION VIII EXPOSURE CONTROLS AND PERSONAL PROTECTION Respiratory Protection: Skin Protection: Eye Protection: Eye Washes: No respiratory protection required, but normal good ventilation is recommended. Forced ventilation may be required if concentrations exceed normal use exposure. Not required, but if desired, use impermeable gloves (neoprene, butyl rubber, natural rubber), as necessary to avoid skin contact, as well as proper clothing or plastic apron. Wash hands before eating, drinking, or using restroom. Safety goggles or safety glasses with side shields. Eye wash stations should be located within 100 feet or 10 second walk of the work area. SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES Physical state: Aerosol Color: Copper Odor: Solvent Boiling Point: Melting Point Flash Point -40 C T.C.C. Specific Gravity: 1.4 Vapor Density (Air = 1): Vapor Pressure (mm Hg.): ph: Evaporation Rate: Solubility in Water: Negligable VOC (Organic solvents) <40% SECTION X STABILITY AND REACTIVITY Stability: Hazardous Polymerization: Hazardous decomposition byproducts: Conditions to avoid Stable Will not occur Oxides of carbon Strong oxidizing agents Page 3 of 5 Product: Copper Anti-seize Aerosol

SECTION XI TOXICOLOGICAL INFORMATION Component NTP Carcinogen IARC Carcinogen OSHA Carcinogen Petroleum Distillates No No No Copper No No No Graphite No No No Butane No No No Propane No No No SECTION XII ECOLOGICAL DATA Water Hazard: Do not allow entry into drains or surface water SECTION XIII DISPOSAL CONSIDERATIONS Recommended method of disposal: Do not incinerate. Depressurize cans. Disposal must be made according to official regulations. EPA Hazardous Waste Number; May be considered an RCRA hazardous waste. SECTION XIV SHIPPING AND TRANSPORTATION INFORMATION U.S. Department of Transportation Ground (49 CFR Proper Shipping Name: Aerosols, flammable Hazard Class or Division: 2.1 Identification Number: UN 1950 Packing Group: None Exceptions: Consumer Commodity ORM-D (Not more than 1 Litrer) International Air Transportation (OCAO/IATA): Cans are not certified for air shipment. Water Transportation (IMO/IMDG): Proper Shipping Name: Aerosols, flammable Hazard Class or Division: 2.1 Identification Number: UN 1950 Packing Group: None Marine Pollutant: Yes Exceptions: Limited quantity (Not more than 1 Liter) SECTION XV REGULATORY INFORMATION United States Regulatory Information TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. Page 4 of 5 Product: Copper Anti-Seize

AerosolCanada Regulatory Information CEPA DSL/NDSL Status: All components are listed on or are exempt from listing on the Domestic Substances List. SECTION XVI OTHER INFORMATION Revision date: 10/19/2017 By: Human Resource Department DISCLAIMER: The information on this material safety data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user. SAF-T-LOK International Corporation specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of SAF-T-LOK International Corporation products. Page 5 of 5