Scope of the CEN/CENELEC Sector Forum "Energy Management" (SFEM)

Similar documents
European standardization - focus on services & smart cities. Maitane OLABARRIA UZQUIANO CEN-CENELEC Management Centre

Consultation of national and European stakeholders in CEN and CENELEC

ISO TC 257 Standards on energy efficiency calculation

European Smart City Standards Green Digital Charter Workshop EUROCITIES Brussels, 14 October 2015

European Commission Introduction to the CEN Strategic Advisory Body for Occupational Health and Safety (SAB OH&S)

Overview of ISO TC 268 and CEN/CENELEC/ETSI Sector Forum SSCC

ISO Smart City standards in practice:

European Technical Committees

MARCOGAZ. Marc Florette

The use of different types of standards in the field of energy efficiency. Maitane OLABARRIA UZQUIANO

NORMAPME Experts Tool Kit. A travel guide to the standardisation world. Being a NORMAPME s expert Role & Objectives

Role of European Standards

Is there a role for European Standards?

CEN-CENELEC Contribution

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL

Recycling and Relevant Emerging Issues for Near-future Environmental Standardization

B C ISO/IEC INTERNATIONAL STANDARD. General criteria for the operation of various types of bodies performing inspection

Deadline for tenders: 22 September 2016

This document is a preview generated by EVS

BUSINESS PLAN CEN-CENELEC/TC 6 HYDROGEN IN ENERGY SYSTEMS EXECUTIVE SUMMARY

CEN and CENELEC s ambitions to 2020

EasyChair Preprint. European CEN-CENELEC Standardization on Material Efficiency for longer lifespan within Circular Economy

EU-RUSSIA ENERGY DIALOGUE

TC 111 ITALY [TBD] The title of TC 111 is Environmental Standardization for Electrical and Electronic Products and Systems.

Response to the public consultation on EU area of skills and qualifications

Carbon accounting requirements of pren Marc Cottignies ADEME, Convenor CEN TC320 WG10 Steve Labeylie Compagnie Fluviale de Transport

Creation of a new CEN Technical Committee on Microbiology of the food chain

Date of circulation. Type of technical body proposed (TC / SC / BTTF)

TECHNICAL BOARD BT N Draft BT C155/2018. CEN/BT by correspondence. For vote Issue date:

BUSINESS PLAN CEN/TC 343 SOLID RECOVERED FUELS EXECUTIVE SUMMARY

ECOS presentation. #standardays

Legal aspects of UK and European Decontamination Standards

Establishment of a new TC on professionals in the field of naturopathy

IEC and CENELEC environmental standardization activity:

June 21, 2011 (Tuesday)

This document is a preview generated by EVS

C-Roads Platform Terms of Reference

EUROPEAN COMMISSION INTERNAL MARKET AND SERVICES DIRECTORATE-GENERAL

C-Roads Platform Terms of Reference

Internal Regulations Part 1. Organization and structure

BSI Smart City Standards and Mapping Research.

ISO group works to improve alignment of management system standards

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD. Footwear Test methods for heels and top pieces Top piece retention strength

Guidelines for auditing management systems (ISO 19011:2011)

International and regional items of interest for August 2016 are as follows:

ADEME French Environment and Energy Management Agency

ISO Project Committee 242 Energy Management

Vademecum on European Standardisation

Sustainability criteria for solid biomass in large scalepower plants

ISO 8106 INTERNATIONAL STANDARD. Glass containers Determination of capacity by gravimetric method Test method

Plans for future European Service standardization and Horizontal Service standardization

Safe Water for Europe: issues and options

1. Introduction and definitions

ISO 8113 INTERNATIONAL STANDARD. Glass containers Resistance to vertical load Test method

Fjärrvärmeutvecklingen i Europa. Tomas Bruce President, Euroheat & Power

Standardisation input for EU H2020 projects

What Brexit means for industry standards

The role of standardisation in EU legislation more opportunities ahead? 10 November 2013

(for financial period 1/ /3 2014)

Council of the European Union Brussels, 7 June 2016 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union

Delegations will find attached to this Note the draft summary conclusions of the 20 th meeting of ERAC, held in Heraklion (EL) on 5-6 June

STANDARDISATION MANDATE FORWARDED TO THE EUROPEAN STANDARDISATION BODIES IN THE FIELD OF ROAD TRANSPORT TELEMATICS

GENERAL GUIDELINES FOR THE COOPERATION BETWEEN CEN, CENELEC AND ETSI AND THE EUROPEAN COMMISSION AND THE EUROPEAN FREE TRADE ASSOCIATION

This document is a preview generated by EVS

Executive Summary. CEN Identification number in the EC register: CENELEC Identification number in the EC register:

Systematic Management of Energy. Clare Hann BSI Paul Whittaker BSI

CEN-CENELEC reply to the European Commission consultation on a possible Innovation Partnership on Raw Materials

EA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services

The European Commission s strategy on Corporate Social Responsibility (CSR) : achievements, shortcomings and future challenges

BioGrace, CEN, ISO and RED standardisation processes and interrelations. Bruno GAGNEPAIN ADEME Public workshop Paris May 19, 2011

Standards Education in Europe and Internationally

Added value of the European Core EPD

ISO INTERNATIONAL STANDARD. Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding

ECISS Internal Regulations Part 1. Organization and structure. Date:

ISO 7459 INTERNATIONAL STANDARD. Glass containers Thermal shock resistance and thermal shock endurance Test methods

Better Training for Safer Food Initiative

For vote Issue date: According to IR2 Clause Deadline:

RFID Privacy panel contribution 1

REPORT FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL

CEN/WS ecat N 206 Replaces document N 204 Rev Secretariat: AFNOR Date:

Form 1: Proposal for a new field of technical activity

ISO INTERNATIONAL STANDARD

This document is a preview generated by EVS

ISO TC265 Carbon Dioxide Capture, Transportation, and Geological Storage

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD

Activities of the EFCA/FIDIC Sustainable Development (SD) Committee in Presentation & discussion Jean FELIX, Chair

P60. More information on the set of CEN standards for the EPBD. [Information on Standardisation] > Introduction

POSITION PAPER European Commission Communication on the Annual Union Work Programme for European Standardisation

Free Movement of Goods in the EEA How does it work? Guðrún Rögnvaldardóttir Per-Arvid Sjøgård Anna Constable

The nuclear scene in Europe: current reality and future trends

Keith Warren C.F.S.P. Technical Committee Chairman. Uniting the European Foodservice Equipment Industry

Irish Standard I.S. EN ISO :2009

ANEC General Assembly 2002 The Extension of the New Approach and Challenges for Standardisation

Form 1: Proposal for a new field of technical activity

Codes and Standards for CCS

Bordea aux Digital City

Effective participation of Societal Stakeholders in Standardization

Exploiting Research Through Standardization. A best practice guide

Transcription:

SECTOR FORUM ENERGY MANAGEMENT Scope of the CEN/CENELEC Sector Forum "Energy Management" (SFEM) by Bernard GINDROZ, PhD ADEME, (SFEM Chairman)

Introduction Since 2006, major development of European Energy standards motivated by an ambitious European policy: Reducing energy consumption and increasing energy efficiency are among the main goals of the European Union. In March 2007, the European Council endorsed three ambitious targets for 2020: cutting greenhouse gases by 20%, reaching 20% of energy from renewable sources, and increasing energy efficiency by 20%. Important European standardization program in relation with : Directive 2006/32/EC on energy efficiency and services Several standards developments consistent with : Directive 2002/91/EC on energy performance of buildings Directive 2005/32/EC on energy using products (EuP) Directive 2009/28/EC on Renewable Energy Sources ISO and IEC standardization program on energy efficiency and Renewables launched in 2008

GHG reduction (energy emissions) (IEA, G8 Energy, May 2009) Energy Efficiency = 54 % of GHG reduction potential by 2030

Standards and Energy Management : a major challenge in the energy efficiency market

What s a standard? A reference document : Elaboration : conscensus Application : voluntary Added value : solutions to repetitive technical, commercial and societal questions Domains/sectors : all

How is standardization organized? UIT-T ISO CEI IEC international AFNOR UTE/CF CEF National ETSI CEN CENELEC Europe Telecommunications All domains Electrotechnic Ex. AFNOR is the French member of the international standards organisations (84% of the French standards come from European and/or International ones).

Sector Forum «Energy Management» How the story started 2002-2005 : CEN CENELEC BT Joint Working Group Energy Management Identified 21 standardization priorities on energy management Recommended to create a new horizontal strategic body on energy management Promotion of energy management and efficiency, Information exchange, standardisation needs, TCs coordination In 2006, CEN and CENELEC Technical Boards created a joint CEN/CENELEC Sector Forum (SFEM), AFNOR secretariat created two joint CEN/CENELEC Task Forces on TF 189 Energy Management and related services, secretariat UNI TF 190 Energy efficiency and savings calculations, secretariat NEN

Sector Forum «Energy Management» How SFEM works Sector Forum SFEM meets twice a year Around 40 experts at each meeting 18 CEN and CENELEC members with new members starting to participate (Cyprus, Slovakia, Slovenia) European organisations : European Commission : DG TREN, DG ENTR, DG ENV, Main professional organisms : IEA, CECED, CONCAWE, EHI, EURELECTRIC, MARCOGAZ, NORMAPME, PU Europe Consumers and citizens : ANEC, ECOS CEN and CLC TCs on energy, buildings, environment, transport, products/equipment (pumps, ) Liaison/coordination with ISO/SAG E and IEC/SG1 on energy efficiency and renewable energy CEN/ SABE : CEN BT Strategic Advisory Body on Environment CEN/CENELEC/ETSI Smart meters coordination group SMCG

Sector Forum «Energy Management» How SFEM works Information from EC on progress on the implementation of main EU directives Energy using products (2005/32/EC) Energy efficiency and services (2006/32/EC) Renewable Energy Sources (2009/28/EC) Working groups to analyse thoroughly priority subjects for standardisation Benchmarking methodology on energy uses (NEN) Calculation method for energy efficiency in transport services (AFNOR) Energy audits in industry, transport and buildings (BSI) Terminology (AFNOR) Guarantees of origin and energy certificates (SIS) Information from TCs or TF (TF189 and 190) on the progress of their work

Sector Forum «Energy Management» The results Standards published or under way EN 16001 on Energy Management Systems, publication 1st of July 2009 (SIS-Sweden) EN 15900 on Energy Efficiency Services, CEN/CLC Enquiry until June 2009, publication Q4 2010 (TF189 PT EES, UNI-Italy) Working drafts on Top down and Bottom up energy efficiency and savings calculations, Q3 2009, (TF190, NEN-Netherlands) CEN/ CLC Technical report on Terminology on energy management and energy efficiency, publication Q4 2009 (SFEM WG, AFNOR-France)

Sector Forum «Energy Management» The results New standardisation work CEN/TC320/WG10 on Energy consumption and GHG emissions in relation to transport services : started December 2008, AFNOR-France CEN/CLC/TF189/PT Benchmarking methodologies for energy uses : started March 2009, NEN-Netherlands What is next. CEN/CLC/WG on Energy Audits, BSI (started June 2009) CEN/CLC/ WG on Guarantees of Origin, SIS.

Sector Forum «Energy Management» CEN/CENELEC Sector Forum on Energy management is of good support to facilitate the outcome and then the acceptation by Members of new subjects related to EU legislation and to sector needs within CEN and CENELEC work programmes; It allows a community of experts to meet and exchange, to be informed of stakes and available best practices and then to decide of the main European standardisation priorities dealing with energy management, energy efficiency and renewable energies.

ISO : Energy Efficiency and Renewables Strategy Advisory Group ISO/SAG E Energy Efficiency and Renewables started in 2008 20 international experts, co-chair Carole Le GALL (France, ADEME/CSTB) and YANG Zeshi (China, SAC) Missions of SAG E : Identify priority topics for normalization Coordination with IEC Collaboration with international structures IEA, WEC, Joint IEA/ISO/IEC workshop on International Standards to promote Energy Efficiency to reduce GHG Emissions Paris, March 2009 (300 participants)

ISO : Energy Efficiency and Renewables New ISO topics Energy Management Systems (Standard ISO 50001) PC launched September 2008 Leadership : USA/Brazil/UK, and support from China First projet ISO 50001 circulated June 2009 Publication by end 2010 International Terminology on Energy Efficiency and Renewables (joint committee ISO/IEC) New project launched Q4 2009 Leadership : France (ADEME/AFNOR) Energy Efficiency and savings calculation methods New ISO proposition from China in preparation

Conclusion Main standardization activity at both European and international levels to define transversal tools needed to implement legislation and answer market Terminology and Metrics Management and organization Practices and procédures Qualifications EN 16001 is the first European standard to be published on energy management Next steps for the CEN CENELEC Sector Forum : Follow up of the implementation of the EN16001 standard by organisms Organize the European inputs to the future international standard ISO 50001 Analyze the needs of European stakeholders for standards on energy management and energy efficiency OCDE - 82 % of GHG emissions are related to energy use Outside OECD - 59 % Scénario + 2 C: EE potential to reduce GHG emissions 54%

Sector Forum «Energy Management» Next meeting will take place in Brussels, On December 10, 2009 Thank You For Your Attention