DECORATION REGULATION IMPORTANT : To avoid disputes, it is mandatory to submit for approval the scale stand layout plan before September, the 30 th with the following items: Plan as seen from above with details of scale, dimensions and location of recesses (party wall + aisle) Cut-out plan view with details of scale, dimensions and heights of anticipated volumes. Any proposals for stands which are not in compliance with the regulations will be refused. Furthermore, any stand erected without the permission of the Architecture department may be dismantled and the costs borne by the exhibitor.. DECO PLUS M. Wilfrid TOUGARD 1, RUE PAUL DELAROCHE 75116 PARIS Tel : +33 (0)1 47 63 94 84 Fax : +33 (0)1 43 80 59 63 E-mail : w.decoplus@free.fr The architecture regulations for CARTES include a list of presentation and layout standards for the stands which have been established to ensure that the exhibition runs smoothly and that people are able to visit it in optimum comfort. No agreements may be entered into between exhibitors. The organiser and DECO PLUS alone are authorised to depart from these regulations following a written request. 1- HALL FLOORS, PILLARS AND WALLS It is strictly forbidden to drill, screw, nail or embed the walls, cladding panels, pillars and floor of the halls; attaching machines to be exhibited to these elements is also forbidden. A lump sum of 229 /excl. tax per hole will be charged to the exhibitor for non-compliance with these regulations. Exhibitors must not paint or mark on the walls, pillars and floors of the halls. Allowed floor loading: 35 tonnes or 13 tonnes / axle tree. Overload: 5 tonnes / sq.m. Resistance to puncture: 6,5 tonnes maxi per 10 sq.cm. Your stand area must be restored to its original condition. Any rubbish (carpet, adhesive, etc.) must be removed. Any damage reported during disassembly of the stand will be invoiced to the exhibitor responsible. The exhibitor is personally responsible for his/her suppliers: decorators, installers, contractors, etc. 2- SETTING-UP OF STANDS AND PRESENTATION OF EXHIBITS Exhibits on display must not disturb nor damage neighbouring stands. No exhibit may exceed the surface area of the stand. 3- ACOUSTIC ANIMATION All exhibitors wishing to use acoustic animation on their stand must do so in accordance with the following regulation: The maximum sound level must not exceed 80 db(a) - in a 2,5 meter area surrounding each stand. Such standards have been set in order to avoid any inconvenience to visitors at neighbouring stands. A strict and permanent control will be assured throughout the exhibitions to insure that the stipulated
sound level is respected. The exhibition s Organizer reserves all rights to stop any violation of this regulation. In addition, for any kind of musical diffusion, you must discharge of royalties, before the exhibition s opening, from: SACEM 16, avenue Gabriel PERI 95210 ST GRATIEN Tel. +33 (0)1 39 34 19 10 sylvie.bizouard@sacem.fr We would therefore request that you do not, under any circumstances, exceed the maximum sound levels mentioned above - not even for short periods of time. Strict checks will be carried out on a continual basis to ensure that exhibitors comply with these requirements. The organiser reserves the right to take whatever measures are necessary to ensure that exhibitors do not violate these regulations. 4- ELECTRICAL FITTINGS ON STANDS For obvious reasons of safety, it is strictly forbidden to use the Exhibition Park s private installations (hall raceways, water gutters, etc.) as a passageway for the stands electrical cables. 5- MAXIMUM HEIGHT ALLOWED (From the building floor) Stand: 6.00 m maximum All construction or decoration items above 3.00 m must be positioned 1 m away from the neighbouring stands and the aisles. The sides of desks, decorations or panels facing neighbouring stands must be smooth, plain and painted in neutral colours or covered in neutral colours wall covering. No electric cable shall be visible. 6- PERIPHERAL CONSTRUCTION We remind you that erecting long walls or screens, using the dividers or temporary walls of neighbouring offices or spaces, which might interfere with the overall view of the halls, mask neighbouring stands or hinder normal visitor traffic on the stand is strictly prohibited. Any fittings on the facade must respect a 50% opening on each of the sides which face out onto an aisle. Any transparent structures which allow visitors to clearly view the inside of a stand (glass, transparent textiles, etc.) may be considered open partitions. Their location and the type of materials used must be specified before the stand proposal can be accepted. Their height will be limited to 3 m on the edges of aisles. 7- RAISED LEVEL The raised level surface must not exceed 40% of the stand surface area. The structure of stands with a raised level (including signs on stands or towers) must not be higher than 6m. Raised levels must imperatively be set back 2 meter from the stand limits (stand separation from neighbouring stands). Floor-supported and/or overhead structures are not allowed to join two stands separated by an aisle, except for inside aisles forming an islet. IMPORTANT: Please, have a look to the Regulation Disabled Access
It is mandatory to send (before the 30 th September 2011) two copies of the drawings with erections specifications and the official approval of stability & solidity delivered by a qualified verification office (*) to the following address: CABINET WATTEAU M. Philippe WATTEAU 41, rue Lazare Carnot 77340 PONTAULT-COMBAULT GSM : +33 (0)6 85 94 49 57 Fax : +33 (0)1 70 10 40 11 E-mail : philippewatteau@numericable.fr (* ) Verification Office SOCOTEC Centre d affaires PARIS-Nord - Le Continentale - BP 306 93153 LE BLANC MESNIL Cedex Tel: +33 (0)1 48 65 42 37 Fax: +33 (0)1 45 91 19 63 Do not forget to order your raised floor surface from our sales department Tel: +33 (0)1 76 77 13 00 E-mail: sales@cartes.com 8- STAND SIGN Signs must not exceed 6 metres height (in relation to the building s floor). Signs covering a whole wall or signs used as partitions are strictly forbidden. Suspended sign The highest point of the sign or its support (when the sign is hanging from a lighting fixture) must not be higher than 6m. The sign must be confined within the stand (or islet) limits and be set back 1 meter from any separations between adjoining stands. Flashing signs are prohibited. 9- LIGHTING The use of revolving or flashing lights is forbidden. Lighting fixtures must be contained within the stand (or islet) limits and must not be higher than 6 meters. 10- COVERING OF PILLARS A maximum height of 6 metres from the floor is allowed. It can be supported by the pillar, but must be separated or, at the very least, insulated with soft material (felt, hardboard, sponge, etc.) placed over the points of contact. 11- HANGING OF FRAMEWORKS Items suspended from the framework of the installed by the Exhibition Centre s Technical Department. Requests must be made directly on your Exhibitor s Area www.services.cartes.com All suspended items must comply with the decorations regulations of the show.
12- LEAFLETS Without our agreement, it is strictly prohibited to distribute leaflets, flyers or any other such material outside the stands or in the areas around the halls (reception gallery, car parks and square). 13- OPERATED MACHINERY All machines shown in operation during the exhibition must be declared to the Organizer. Exhibitors accept full responsibility for all presentations and demonstrations made by them, under penalty of being inactivated. Nevertheless, only machines and equipment certified by the Safety Commission as being in accordance with the regulations will be authorized to be displayed in working order. Whenever equipment is presented in motion, a protected area should be reserved for these manoeuvres so that there will always be a minimum distance of 1 meter between the equipment and visitors; this minimum distance can be increased according to the characteristics of the equipment on display. These regulations will be valid for all stands, including stands located outdoors.
Rules decoration, architecture and animation C o n s t r u c t i o n H e i g h t / R e c e s s > 3.00 m 3.00 m 6.00 > 1.00 m Maximum height 6,00 m. All construction or decoration items above 3.00 m must be positioned 1.00 m away from the neighboring stands and the aisles. The sides of desks, decorations or panels facing neighbouring stands must be smooth, plain and painted in neutral colours or covered in neutral colours wall covering P a r t i t i o n i n g a n d C o n s t r u c t i o n o n A i s l e B o u b d a r i e s 3.00 m > 50 % 50 % Maximum height 3,00 m. Any fittings on the facade must respect a 50% opening on each of the sides which face out onto an aisle. Any transparent structures which allow visitors to clearly view the inside of a stand (glass, transparent textiles, etc.) may be considered open partitions. Their location and the type of materials used must be specified before the stand proposal can be accepted. Their height will be limited to 3 m on the edges of aisles. O v e r h e a d S i g n / L i g h t i n g t r u s s < 6.00 m > 1.00 m Maximum height 6,00 m. Signs must not exceed 6 metres height (in relation to the building s floor). Signs covering a whole wall or signs used as partitions are strictly forbidden. Suspended sign The highest point of the sign or its support (when the sign is hanging from a lighting fixture) must not be higher than 6m. The sign must be confined within the stand (or islet) limits and be set back 1 meter from any separations between adjoining stands. The raised level surface must not exceed 40% of the stand surface area. The structure of stands with a raised level (including signs on stands or towers) must not be higher than 6 m. Raised levels must imperatively be set back 2 meter from the stand limits (stand separation from neighbouring stands and aisles). Any structure and/or overhead structures are not allowed to join two stands separated by an aisle, except for inside aisles forming an islet. The power radiated by the elements of animation (wiring for sound, video ) will not have to exceed 80dB(A) value measured in a zone of 2,50 m around the stand and this without any exception, even of short duration. A maximum height of 6,00 m from the floor is allowed for pillar Lights with glares and gyrophares are forbidden. White lettering on green bottom is reserved for the exits. It is formally prohibited to lay out some installation that it is in front of the RIA (net curtain, plants ) and this 24 h/24. Copyright DECOPLUS 2011