WILLBRANDT PTFE Expansion Joint Type 0 00 Type 0 is a 3 or corrugated PTFE expansion joint that is hotformed under pressure from extruded PTFE tubing. The fibers are executed without interruption. It is characterised by its high level of media resistance and movement absorption. Type 0 is primarily used in chemical plants to absorb movement, insulate sound and compensate offsets. Its high level of elasticity and low stiffness rates means that it can also be used in pipes made from fragile materials such as glass, graphite or enamel. Bellow design Pressure resistance Multicorrugated, pure PTFE bellow with external stainless steel supporting rings from 1.1. PTFE bead on both sides for steel flanges with integrated tie rods. Standard version: white PTFE, electrically insulating. Special version: black PTFE, electrically conductive. Max. operating pressure: bar, depending on the temperature see tables Flange version Special accessories Steel SJRG, primed. Standard version delivered with flange with tie rods and clearance holes (drilled according to DIN PN ). Other flange versions and materials are possible. PTFE guide sleeves Potential equalisation Flameresistant protective covers Dust and splash protection covers Earth cover/sun protection hoods Conformity FDA and EG 19/0 Standard version, 3corrugated with tie rods Standard version, corrugated with tie rods No additional seals are required for normal, flat flange connections up to 0. From 3 and in the case of glass components or other connecting parts it is necessary to use elastic seals made of TFM with reinforcement (please refer to the required surface pressure). PTFE expansion joints may not be subject to torsion or vibration. The bellows should not be painted or heat insulated. Cold insulation is possible. Please refer to the installation instructions. ++++ We will be happy to send you further on the individual types and designs. ++++ 3
WILLBRANDT PTFE Expansion Joint Type 0 Permissible pressure loading at temperature (3corrugated) C 0 C 0 C 0 C C 1 C C 0 C 0 C 0 C 0 C 0 0 1 0 0 0 3 00 0 00 0 00 0 0.00 bar.00 bar.00 bar. bar.00 bar 0 bar. bar 0 bar 1. bar.00 bar. bar. bar. bar. bar. bar. bar 1. bar.00 bar. bar. bar. bar. bar. bar 0 bar.00 bar 1. bar 0.0 bar.00 bar. bar. bar bar. bar. bar 1. bar 1. bar 0. bar.00 bar bar bar.0 bar. bar. bar 1. bar 1. bar 0. bar 9. bar. bar.0 bar. bar 3. bar. bar 1. bar 1. bar 0.0 bar.00 bar. bar. bar 3. bar. bar. bar 1. bar 0.0 bar 1. bar 0. bar. bar 0 bar 3. bar. bar 1. bar 1. bar 0.0 bar 0.0 bar 0. bar. bar 3. bar 1. bar 0. bar 0.0 bar 0.0 bar 0.0 bar 0 bar 3. bar. bar.00 bar 1. bar 0.0 bar 0.0 bar 0. bar 0. bar 0. bar. bar 0 bar. bar 1. bar 0.0 bar 0.0 bar 0.0 bar 0.0 bar 0. bar Permissible pressure loading at temperature (corrugated) C 0 C 0 C 0 C C 1 C C 0 C 0 C 0 C 0 C 0 0 1 0 0 0 3 00 0 00.00 bar.00 bar. bar. bar 3. bar 0 bar. bar 1. bar 0 bar. bar 3. bar 3. bar bar. bar 1. bar. bar bar 3. bar 3. bar. bar. bar 1. bar 0 bar. bar. bar 1. bar 1. bar 0.0 bar. bar.0 bar 1. bar 1. bar 1. bar 0 bar. bar. bar. bar bar 1. bar 0. bar 0 bar 1. bar 1. bar 1. bar 1.0 bar 0. bar 0.0 bar 3. bar 3. bar 1. bar 0. bar 0. bar 0. bar. bar 1. bar 1. bar 0. bar 0. bar 0. bar 0. bar.0 bar 0 bar 0. bar 0.0 bar 0.0 bar 0. bar. bar 0.0 bar 0.0 bar 0.0 bar 0. bar 0.0 bar 0. bar Permissible vacuum loading at temperature (3corrugated) C 0 C 0 C 0 C C 1 C C 0 C 0 C 0 C 0 C 0 0 1 0 0 0 3 00 0 00 0 00 0 0 0.0 bar 0. bar 0.9 bar 0.91 bar 0. bar 0.9 bar 0. bar 0.9 bar 0. bar 0. bar 0.1 bar 0. bar 0.9 bar 0.9 bar 0. bar 0.9 bar 0.9 bar 0.9 bar 0.1 bar 0. bar 0.9 bar 0. bar 0.39 bar 0.91 bar 0.91 bar 0. bar 0. bar 0.0 bar 0. bar 0.9 bar 0. bar 0. bar 0. bar 0.3 bar 0. bar 0. bar 0. bar 0.9 bar 0.9 bar 0. bar 0.3 bar 0. bar 0.13 bar 0. bar 0. bar 0. bar 0. bar 0.3 bar 0.3 bar 0. bar 0. bar 0.9 bar Note: Type 0 (corrugated) is not suitable for vacuum loading. Type 0 (corrugated) is not suitable for vacuum loading. For higher pressures, please refer to Type 0 HD. ++++ We will be happy to send you further on the individual types and designs. ++++
WILLBRANDT PTFE Expansion Joint Type 0 Dimensions Type 0 (3corrugated) 0 0 1 1 0 0 0 3 00 0 00 0 00 0 0 Overall length BL 1 1 1 1 1 1 1 1 1 1 Bellow Flange PN * Movement absorption* 3 b WF* 1 ØD ØPCD Ød n s ØC +. 00 00 30 000 0 0 130 00 000 00 00 000 0000 0 00 1 1 0 0 0 30 9 11 1 1 1 1 0 0 0 9 3 00 0 0 9 10 1 M M M M 33 33 3 39 9 1 1 1 1 0 3 30 0 3 13 00 11 13 1 1 Stiffness rates* N/ 3 0 0 0 1 1 1 0 0 0 0 0 3 00 0 N/ 0 1 1 0 0 0 3 3 Weight kg.3.9.0.0.0.0.0.0.0.0.0 1.0 13.0 1.0 * Other dimensions (e.g. according to DIN PN,, ANSI b, 1 lbs) are available upon request. * 3 The movement absorption values are maximum values and must not occur in combination. Please refer to the movement diagram in the technical appendix. * The stiffness rates are valid for C +/ %. At higher temperatures the stiffness rate can fall by up to %. Dimensions Type 0 (corrugated) 0 0 1 1 0 0 0 3 00 0 00 Overall length BL 1 1 1 0 Bellow Flange PN * Movement absorption* 3 b WF* 1 ØD ØPCD Ød n s ØC +. 00 00 30 000 0 0 130 00 000 00 00 000 0000 1 1 0 0 0 30 1 1 1 0 0 0 9 3 00 0 M M M M Stiffness rates* * Other dimensions (e.g. according to DIN PN,, ANSI b, 1 lbs) are available upon request. * 3 The movement absorption values are maximum values and must not occur in combination. Please refer to the movement diagram in the technical appendix. * The stiffness rate are valid for C +/ %. At higher temperatures the stiffness rate can fall by up to %. 9 1 1 1 1 0 3 30 0 3 13 0 0 0 0 N/ 11 11 3 0 0 1 0 0 0 0 0 N/ 0 0 0 1 1 1 1 0 0 0 0 Weight kg.3.9. 11.0 1 1.0.0 3.0.0.0 0.0 1.0 Please note the appropriate fixed point constructions and plain bearings in your piping system! For more please refer to our installation instructions. ++++ We will be happy to send you further on the individual types and designs. ++++
WILLBRANDT PTFE Expansion Joint Type 0 HD 00 Type 0 is a to corrugated PTFE expansion joint that is hotformed from wound foil piping under pressure. The material is homogeneous, has no pores and the forming process ensures a redirection of the material fibers without interuption. It is characterised by its high level of pressure resistance, media resistance and movement absorption. Type 0 HD is primarily used in chemical plants to absorb movement, insulate sound and compensate offsets. Its high level of elasticity and low stiffness rates means that it can also be used in pipes made from fragile materials such as glass, graphite or enamel. Bellow design Flange version Multicorrugated, pure PTFE bellow with stainlesssteel external stainlesssteel supporting rings from 1.1. PTFE bead on both sides for steel flanges with integrated tie rods. Standard version: white PTFE, electrically insulating. Special version: black PTFE, electrically conductive. Spheroidal graphite iron GGG0, primed. Standard version delivered with flange and tie rods and threaded bolt holes (drilled according to DIN PN ). Other flange versions and materials are possible. Pressure resistance Max. operating pressure: bar (depending on the temperature see tables) Special accessories PTFE guide sleeves Potential equalisation Flameresistant protective covers Dust and splash protection covers Earth cover/sun protection hoods Conformity FDA and EG 19/0 Standard version, 3corrugated with tie rods Standard version, corrugated with tie rods No additional seals are required for normal, flat flange connections up to 0. From 3 and in the case of glass components or other connecting parts it is necessary to use elastic seals made of TFM with reinforcement (please refer to the required surface pressure). PTFE expansion joints may not be subject to torsion or vibration. The bellows should not be painted or insulated for purposes of heat insulation. Cold insulation is possible. Please refer to the installation instructions. ++++ We will be happy to send you further on the individual types and designs. ++++
WILLBRANDT PTFE Expansion Joint Type 0 HD Permissible pressure loading at temperature Quantity Waves 0 C C C 0 C 0 C 0 C C 1 C C 0 C 0 C 0 C 0 C 3 9 bar bar bar bar bar 1 bar 1 bar.0 bar.0 bar.0 bar bar bar bar bar.0 bar.0 bar.0 bar.0 bar.0 bar bar bar bar bar.0 bar.0 bar.0 bar.0 bar.0 bar bar bar bar bar.0 bar.0 bar 9. bar 9. bar 9. bar. bar. bar. bar. bar 1.1 bar 1.1 bar bar bar bar. bar. bar.0 bar.0 bar.0 bar. bar. bar. bar. bar. bar. bar. bar. bar. bar bar bar bar bar.0 bar.0 bar.1 bar.1 bar.1 bar 3. bar 3. bar 3. bar 3. bar. bar. bar. bar. bar. bar bar bar bar bar.1 bar.1 bar. bar. bar. bar. bar. bar. bar. bar bar bar bar bar bar bar bar A guide sleeve should be used for fl ow rates of over 3 m/s. This can be made from PTFE for rates of up to m/s. A stainless steel guide sleeve should be used for fl ow rates of over m/s. Permissible vacuum loading at temperature Quantity Waves 0 C C C 0 C 0 C 0 C C 1 C C 0 C 0 C 0 C 0 C 3 9 0. bar 0. bar 0. bar 0. bar 0. bar 0. bar 0. bar 0. bar 0.3 bar 0.3 bar 0.3 bar 0.3 bar 0.3 bar 0.3 bar 0.9 bar 0. bar 0. bar 0. bar 0.9 bar 0. bar 0. bar 0. bar 0. bar 0. bar 0.9 bar 0. bar 0.3 bar 0.9 bar 0. bar 0.3 bar 0. bar 0. bar 0. bar 0.1 bar 0.1 bar A guide sleeve should be used for fl ow rates of over 3 m/s. This can be made from PTFE for rates of up to m/s. A stainless steel guide sleeve should be used for fl ow rates of over m/s. Stiffness rates Direction of movement / Stiffness rates 0 0 1 1 0 0 0 3 00 0 00 (N/) (N/) 1 111 3 1 3 9 0 9 3 13 13 1 19 9 199 193 91 The stiffness rates are valid for C +/ %. At higher temperatures the stiffness rates can fall by up to % Factor for wave number Number of waves 3 9 Factor 1, 1,0 0, 0, 0, 0, 0, 0, 0,3 Factor for temperatures Temperature C 0 C 1 C 1 C Factor 1,0 0, 0, 0, Type 0 (corrugated) is not suitable for vacuum loading. ++++ We will be happy to send you further on the individual types and designs. ++++
WILLBRANDT PTFE Expansion Joint Type 0 HD Dimensions Type 0 HD (corrugated / 3corrugated) 0 0 1 1 0 0 0 3 00 0 00 Overall length BL 3 corrugations 0 0 0 9 0 9 1 1 1 1 1 1 Bellow Flange PN * Movement absorption* 3 corrugations 3 corrugations b WF* 1 ØD ØPCD Ød n s ØC angular* angular* 3. 3.......3...0.3. 0 1 00 30 000 0 00 00 10 0 19 00 3 1 1 0 0 0 30 1 1 1 0 0 0 9 3 00 0 1 1 19 1 1 1 1 1 0 3 30 0 3 33 1 1.0.0...0.0.0 19. 19. 1..... 1 1.0.0...0.0.0 19. 19. 1..... Weight 3 corrugations kg..0.0.0.0.0.0.0.0.0 1.0 * Other dimensions (e.g. according to DIN PN,, ANSI b, 1 lbs) are available upon request. * 3 The movement absorption values are maximum values and must not occur in combination. Please refer to the movement diagram in the technical appendix. * Angular movement absorption only possible without tie rods. Dimensions for Type 0 HD (basic and expansion values to corrugations [max. corrugations]) 0 0 1 1 0 0 0 3 00 0 00 Length BL corrugations 11 1 1 1 1 1 1 1 1 Bellow Flange PN * Movement absorption per corrugation* 3 b WF* 1 ØD ØPCD Ød n s ØC BL angular* per corrugation 3. 3.......3...0.3. 0 1 00 30 000 0 00 00 10 0 19 00 3 1 1 0 0 0 30 1 1 1 0 0 0 9 3 00 0 1.0.0.0.0.0.0.0.0.0.0.0 1 19 1 0 9 1 1 1 1 0 3 30 0 3 33 13...0.0.....0.0 1.3 1.0 * Other dimensions (e.g. according to DIN PN,, ANSI b, 1 lbs) are available upon request. * 3 The movement absorption values are maximum values and must not occur in combination. Please refer to the movement diagram in the technical appendix. * Angular movement absorption only possible without tie rods. Please note the appropriate fixed point constructions and plain bearings in your piping system! For more please refer to our installation instructions. ++++ We will be happy to send you further the individual types and designs. ++++