Training Guide 2017 Training Award
Weber Training Programmes Weber, an international leader in the manufacture and application of innovative and practical solutions for Building Products has designed training programmes specifically to address the current needs of the industry. Comprised of scheduled courses and a series of further in-depth specialist courses carried out by arrangement, Weber appreciates the importance of training and aims to bridge the skills divide by working closely with applicators. CITB Grants for Weber courses are available for CITB Registered companies and in-scope companies. Weber has established, dedicated training facilities at their manufacturing plant in Bedfordshire and access to the Saint-Gobain Technical Academies across the country to accommodate the running of these courses. Attendees will have use of conference / classroom facilities and purpose designed practical areas in a relaxed, informal atmosphere. Lunch and light refreshments will be provided throughout the duration of the course. How to book To book places on any of the scheduled courses or enquire regarding the specialist courses Call on 08703 330070, email technical.academy@saint-gobain.com - or - book online at www.netweber.co.uk Weber can provide information on nearby accommodation if required. Just ask when you are making your booking. If you need to cancel a course you have booked please give 48 hours notice. 1
Monocouche Renders Monocouche through-coloured renders have advance technology which enables a one-coat application to full BS EN 13914 standard thickness with areas often applied and finished within the same day. Hidden savings result from reduced programme times & lower scaffolding costs, obvious benefits can therefore be realised for the developer and client alike. Monocouche Aimed primarily at those using Monocouche materials for the first time, this course explores the fundamental basics of good rendering practice along with the application and finishing techniques associated with these products. A one day course, it includes both theoretical and practical activity which has been mapped to the National Occupational Standards for Plastering Level 2 & 3 qualifications as presented on page 7. Practical demonstration of machine application techniques are included as part of the course. Render Systems weberend MT 1 day course Framed Construction /Masonry A render system suitable for application to render substrate boards as part of a steel or timber framed construction or with the addition of a levelling render coat onto masonry. This one day course introduces the meshcloth reinforced render system which is finished with a textured synthetic coating. weberend OCR & Decorative 1 day course Modern alternative to site mix, pre-blended, one coat weberend OCR base render saves time and money on site. This course explores the fundamentals of good rendering practice along with the application of various decorative finishes available.
External Wall Insulation Increasingly popular as the technically superior method of achieving ever more stringent insulation requirements, External Wall Insulation (EWI) has a wide range of possible insulants, systems and finishes. These courses are suitable for applicators, estimators and surveyors alike. webertherm XM Lightweight EWI system incorporating thin-coat polymer render and mesh cloth reinforcement, providing efficient thermal insulation for refurbishment and new build projects. Comprehensive range of colours and textures enable the creation of striking visual effects. This course is suited to entry level applicators. webertherm XM courses have been mapped against Cskills Awards L2 NVQ Diploma in Insulation and Building Treatments EWI Boarder/Finisher qualification as presented on page 8. webertherm XM / RB Produces a brick-effect finish on the webertherm XM EWI system it is the combination of two polymer-modified mortars in differing colours, used together to create a brick-effect finish by cutting through the top colour into the colour beneath. webertherm XP Covers the application and finishing processes of the webertherm XP system. This course explores the fundamental basics of good rendering and EWI practice. The practical part of the course utilises machine application techniques for the render application which is revolutionary within the EWI business. webertherm XB An EWI system which involves insulation boards mechanically fixed to a masonry base and clad with standard brick slips / tiles positioned with spacers. webertherm XP / RB A brick-effect finish onto webertherm XP EWI system. A brick face render is applied to the webertherm M1 render and cut to simulate bricks. webertherm FT This system using an extruded aluminium rail to provide a cavity when using EWI with single skin or frame construction. Standoff rails provides the weather defence cavity recommended by the NHBC when using EWI with metal frame construction. Course Length: 1 day per system training course. Locations: Flitwick & subject to demand - East Leake, Kirkby Thore, Birmingham and Erith. 5
Tiling Weber designed & developed a range of tile fixing products for the professional tile fixer. The easy to use product range is split in to four sections - Prep, Fix, Set & Joint. Weber offers a range of tiling courses, suitable for all skill levels. Some of our most popular courses include: Product Training Suitable for Retail Staff Natural Stone Tile Fixing Tiling onto Wooden Substrates Underfloor Heating Waterproofing and Tanking Levelling Compounds All courses involve classroom training, full access to purpose designed practical areas and are run in an informal and relaxed environment. Bespoke tiling courses can be offered to suit your training needs. Flooring weberfloor products have been developed for optimum speed of application allowing access by other trades in the shortest possible time. High-performance materials ensure strength and durability in the most demanding industrial and commercial applications. The one day weberfloor training course is aimed primarily at those using Weber flooring materials for the first time. The products create a smooth surface that is ready for foot traffic after only a few hours and that can be covered with a soft floor covering in as little as 24 hours. The range consists of products for use as floating, un-bonded and bonded screeds including insulated, acoustic or heated floors. Bespoke flooring courses can be offered to suit your training needs. 3
Technical Mortars & Concrete Repair In recent years the repair, protection and strengthening of concrete structures has become a growth area in the construction industry. Reinforced concrete can be a highly durable structural material requiring little or no maintenance. However, it is now recognised that without correct design, mixing, placement and curing the durability of concrete may be impaired. Weber has a wide portfolio of products designed to facilitate a repair in most circumstances, ranging from handplaced materials to flowable or spray solutions. Concrete Repair This popular one day programme explains and demonstrates the important processes and relevant preparation procedures required to complete reliable structural and nonstructural repairs in concrete. A combination of theory & hands-on practical work, this course supports the webercem concrete repair systems which meet the requirements of BS EN 1504-3 which has been mapped to National Occupational Standards for Specialist Concrete Occupations Concrete Repair learning outcomes 3 and 7. Composite Strengthening Glass, aramid, carbon fibre fabric wrap and carbon fibre plate have been developed into a very cost-effective and flexible range of structural strengthening options for the construction industry which can be used in Civil Engineering or during the change of use of Buildings. It is suited to applicators, supervisors and engineers alike. In fact anybody who has an interest in repairs to concrete being carried out successfully will benefit from attendance. Technical Mortars Technical mortars is a course suited for Weber stockists and distributors. The course covers briefly concrete repair products and then concentrates on grouting, anchoring, pavement repair and bedding mortars. It is an intense day course but covers all the issues for anyone wishing to sell construction chemicals.
EWI Operative Carding & Installer PAS 2030 Support The PAS 2030 standard was introduced to ensure high standards in quality and competence in the installation of EWI and other energy efficiency solutions. Companies are to be certified by Certification Bodies and this includes a high proportion of operatives needing proven competence in installing EWI. Qualifications in the form of NVQ s, supported by training grants, are available, and operatives will need personal identification cards issued by specific system designers. Surveyor / Site Supervisor Training The one day course covers the fundamental issues of fitting EWI to a building from the removal of exterior fixtures and services, through to the application process of the Weber EWI system. The delegates will gain necessary technical knowledge, skill and experience for the full installation process of EWI. On successful completion of the course the participants will be assessed and if the required technical competence is demonstrated they will be issued with a Weber External Wall Insulation Approved Surveyor/ Site Supervisor Card. Weber offers assessed courses on each system for experienced operatives in order to achieve Assessed Operative status and provide a route to NVQ Level 2 On-site Assessment, The course will be split into two parts - Classroom Theory of EWI & System Requirements and Practical Assessment. The course length will range from two to four days depending on the skill level of the operative. A pre-course questionnaire will be required to be completed per operative to establish suitability of course and length required. Practical Assessments available are: A1. Boarding and Board Profiling A2. webertherm XM A3. webertherm XP A4. webertherm XM / RB A5. webertherm XP / RB A6. webertherm XB Available Qualifications: Weber Assessed Operative Card. Locations: Flitwick, & subject to demand - East Leake, Kirkby Thore, Birmingham and Erith. Assessed EWI Training In line with PAS 2030 requirements, operatives are required to be assessed by each system manufacturer for all systems being used.
The course content has been mapped against vocational qualifications. Attending these courses can be used as evidence towards the achievement of vocational qualifications (NVQ s) leading towards the acquisition of a CSCS Blue Card. Manufacturer Training Programme Mapping Programme title(s) weberpral Monocouche Render Claimed qualification title: Plastering, Insulation and Building Treatments, Roofing, Trowel Occupations, Building Maintenance Multi-trade Repair and Refurbishment Operations Units Mapped: National Occupational Standards for Plastering Level 2 & 3 qualifications VR67 Applying solid render to background surfaces and producing finishes in the workplace VR70 Applying projection plaster and render; and maintaining equipment in the workplace VR77 Producing complex external render finishes in the workplace Subject ref. Subject title Unit reference Learning outcome(s) Assessment criteria Remarks 1 Health and safety VR67, VR70, VR77 and VR449 2 Why render VR67, VR70, VR77 and VR449 3 Monocouche concept and range 2, 3 and 4 2.1, 3.3, 4.5 Knowledge 1 1.3 and 1.4 Knowledge Knowledge 4 Substrates VR67, VR77 and VR449 5 Application VR67, VR77 and VR449 7 VR67-7.6 Points 1 and 3 VR77-7.4 Point 1 VR499-7.6 Point 1, 7 and 8 7 VR67-7.6 Points 7 and 10 VR77-7.4 Point 3 VR499-7.6 Parts of point 4 Knowledge Knowledge 6 Machine application VR70 3, 4 and 7 3.3, 4.2 and 4.3 7.5 Points 1, 2, 3, 4 and 6. 7.7 Knowledge 7 Creating monocouche finishes VR67, VR77 and VR449 7 VR67-7.6 Parts of point 10 VR77-7.4 Parts of point 5 VR499-7.6 Parts of point 4 Knowledge 8 Troubleshooting VR67, VR77 and VR449 4 4.3 Knowledge 7
The course content has been mapped against vocational qualifications. Attending these courses can be used as evidence towards the achievement of vocational qualifications (NVQ s) leading towards the acquisition of a CSCS Blue Card. Manufacturer Training Programme Mapping Programme title(s) webertherm XM EWI Claimed qualification title: Insulation and Building Treatments Units Mapped: Cskills Awards L2 NVQ Diploma in Insulation and Building Treatments EWI Boarder/Finisher VR448 Install External Wall Insulation VR449 Applying surface finishes to external wall insulation in the workplace Subject ref. Subject title Unit reference Learning outcome(s) Assessment criteria Remarks 1 Health and safety VR448 and VR449 2 Why insulate VR448 and VR449 1, 2, 3 and 4 1.1, 2.1, 3.3 and 4.5 Knowledge 1 1.3 and 1.4 Knowledge 3 Benefits of External Wall Insulation VR448 and VR449 4 and 7 VR448 4.2 and 7.7 VR449 4.2 and 7.5 Knowledge 4 Understanding U-values Not in Units N/A N/A Knowledge 5 webertherm XM system VR448 and VR449 7 VR448 7.6 all bullet points VR449 7.5 all bullet points Knowledge 6 Fixing of insulation boards 7 Insulation below Damp Proof Course VR448 All All Knowledge Not in Units N/A N/A Knowledge 8 Application of mesh cloth with weberend LAC VR449 7 7.6 Bullet point 7 Knowledge 9 Application of finish coats weberplast TF, weberend PTC and dry dash VR449 All All Knowledge
Venue: Flitwick, Bedfordshire 09:45 Registration and coffee Health & Safety Why render? Monocouche concept and range Substrates Application 12:30 LUNCH PRACTICAL 16:30 Finish Typical Training Itinerary weberpral M Monocouche Training Programme Aimed primarily at those using Monocouche materials for the first time, this course explores the fundamental basics of good rendering practice along with the application and finishing techniques associated with these products. A one day course, it includes both theoretical and practical activity. Practical demonstration of machine application techniques are included as part of the course. Machine application of weberpral M Creating monocouche finishes - scrape finish, spray texture, dry dash, cutting ashlars Troubleshooting EXAMPLE 9
Onsite Training & Assessment On-site assessment for experienced EWI operatives for Weber System Manufacturer Assessed Operative Card Weber s team of Application Managers are qualified to assess operatives on-site in the application of Weber systems. Cards are issued containing the operatives details (name and photograph), applications successfully assessed (insulation boarding and/or surface finishing), systems successfully assessed (webertherm XM finishes, webertherm XP finishes, weberend RB brick-effect finish) and a card review date. A register of operatives holding Weber Assessed Operative Cards is held by Weber and supports installer company compliance with PAS 2030 and SWIGA (Solid Wall Insulation Guarantee Agency) frameworks. To enquire about obtaining a Weber Assessed Operative Card, please contact your Weber Project Sales Manager. S/NVQ Qualification (via On-site Assessment) On-site assessment for experienced EWI operatives for S/NVQ Assessment Aim: On-site visits and assessments to determine the competence of an operative in the application of insulation boards and/or surface finishes for EWI systems. Available Qualifications: S/NVQ Level 2 Insulation and Building Treatments (EWI) Certificate. EWI Boarder EWI Finisher EWI Boarder / Finisher Suitable For: Operatives experienced in the application of EWI systems seeking to gain a formal qualification. Operatives are assessed in their day-to-day activity by A1 Assessors. Funding: Grants available for in-scope companies. For further information refer to INCA Qualifications in External Wall Insulation www.inca-ltd.org.uk, CITB - www.citb.co.uk & DECC - www.gov.uk ** Please note that grant funding levels and course costs are accurate at the time of printing but are subject to alteration **
Saint-Gobain Technical Academy The Saint-Gobain Technical Academy is a collaboration of businesses enabling customers to access up-to-date information and training on a wide range of products and systems from a number of Saint-Gobain s brands, to meet the requirements of the sustainable building agenda and help the industry combat the rising skills shortage. The Saint-Gobain Technical Academies have been designed to help combat the industry s skills shortage and provide training on new technologies and systems, as well as up-to-date information around legislation. As Building Regulations become tighter, construction industry professionals are finding themselves facing a number of new products and systems that require very different skills from more traditional building materials an methods. The Academies focus on equipping these professionals with key knowledge about the sustainable building agenda as well as the vital skills needed to deliver it. Training at the Technical Academies is provided by experts from a number of Saint-Gobain manufacturing businesses, including British Gypsum, Isover and Weber which are all experts in their respective fields. The courses are targeted at a range of experienced industry professionals, including contractors, builders merchants and architects, who are looking to up-skill, as well as new recruits to the industry. The courses offered will continually develop to keep up with the changing regulatory and building design requirements and additional spoke courses can also be requested. Training Academy Locations www.saint-gobain-technical-academy.co.uk 1 Clevedon Unit 1 The Courtyard Barnes Ground, Kenn, Clevedon, North Somerset, BS21 6TB 4 Flitwick Dickens House, Enterprise Way, Maulden Road, Flitwick, Bedford, MK45 5BY 2 3 East Leake British Gypsum, East Leake, Loughborough, Leicestershire, LE12 6HX Erith Unit 4, Gyproc Business Park, Church Manor Way, Erith, Kent, DA8 1DR 5 6 7 Kirkby Thore British Gypsum, Nr Penrith, Cumbria, CA10 1XU Kingscourt Kingscourt, Co. Cavan, CA1, Ireland Dublin Unit 4, Kilcarbery Business Park, Nagor Road, Dublin 22, Ireland 7 6 5 1 2 4 3 11
2017 Training Calendar Detailed one day courses held at the Saint-Gobain Technical Academy at Flitwick covering application and finishing processes for all Weber products are listed below. Training at other Technical Academies can be arranged on request. Attendees will have use of conference/classroom facilities and purpose designed practical areas in a relaxed, informal atmosphere. Lunch and light refreshments will be provided throughout the duration of the course. How to book To enquire about costs, availability or book places on any of the scheduled courses Call Saint-Gobain Technical Academy on 0115 9451154 Email technical.academy@saint-gobain.com Book online at www.netweber.co.uk We can provide information on nearby accommodation if required. Just ask when you are making your booking. If you need to cancel a course you have booked please give us 48 hours notice. January 10 th webertherm XM EWI 12 th Modern Renders - weberend OCR, weberend MT & Decorative 17 th weberfloor flooring systems 19 th weberpral Monocouche Render 24 th Concrete Repair 26 th webertherm FT EWI Rail System February 2 nd Tile Fixing 7 th webertherm XM EWI 9 th weberpral Monocouche Render 14 th weberend OCR & Decorative 16 th weberend MT 21 st webertherm M1 EWI 28 th Concrete Repair March 2 nd weberpral Monocouche Render 9 th weberend MT 14 th webertherm XM EWI 16 th weberend OCR & Decorative 21 st weberfloor flooring systems 23 rd weberpral Monocouche Render April 4 th Tile Fixing 11 th weberend MT 13 th weberfloor flooring systems 18 th webertherm XM EWI 20 th weberpral Monocouche Render 25 th webertherm M1 EWI 27 th weberend OCR & Decorative
May 2 nd weberpral Monocouche Render 4 th webertherm FT EWI Rail System 9 th webertherm XM EWI 11 th weberfloor flooring systems 16 th weberend MT 18 th weberpral Monocouche Render 23 rd Concrete Repair June 1 st weberend OCR & Decorative 6 th Tile Fixing 8 th weberend MT 13 th webertherm XM EWI 22 nd weberpral Monocouche Render 27 th webertherm M1 EWI July 4 th Tile Fixing 6 th weberend OCR & Decorative 11 th webertherm XM EWI 13 th weberfloor flooring systems 18 th weberend MT 20 th weberpral Monocouche Render 25 th Concrete Repair August 1 st webertherm FT EWI Rail System 8 th weberpral Monocouche Render 10 th weberfloor flooring systems 15 th weberend OCR & Decorative 17 th weberend MT 29 th webertherm M1 EWI September 5 th Tile Fixing 7 th weberend MT 12 th webertherm XM EWI 14 th weberfloor flooring systems 19 th weberend OCR & Decorative 21 st weberpral Monocouche Render 26 th Concrete Repair October 5 th weberend OCR & Decorative 10 th webertherm XM EWI 12 th weberend MT 17 th webertherm M1 EWI 19 th weberpral Monocouche Render 31 st webertherm FT EWI Rail System November 2 nd weberend MT 7 th weberfloor flooring systems 9 th Tile Fixing 14 th webertherm XM EWI 21 st weberend OCR & Decorative 23 rd weberpral Monocouche Render 28 th Concrete Repair December 5 th webertherm XM EWI 7 th Tile Fixing 12 th webertherm M1 EWI 14 th weberpral Monocouche Render 19 th weberend MT Courses on request:- Technical Mortars - Grouting & anchoring, Bedding & Highway Maintenance Composite strengthening EWI Brick - webertherm XB & weberend RB 13
Digital Support & Smart Tools In a digital age, Weber has supported the change in how businesses operate with digital tools offering smart real time solutions. The Product Comparator software enables easy comparison of the main features and benefits of products. Frequently Asked Questions, problem solving techniques, technical advice and colour cards are available while latest brochures, data sheets and certification are available in an extensive Download Centre. The façade Colour Simulator allows construction professionals and property owners to upload their own image or select from a library of standard building types to create a realistic impression of a property in a single colour, or in combinations of colours, in a matter of minutes. A U-value Calculator is also available on the website offering users the opportunity to enter their project details through a selected range of drop-down menus in order to obtain their calculation. Full system analysis and condensation risk calculation can also be provided via the Specification Team should advice need to be sought. The Weber app offers similar functionality as the website but provides instant access to comprehensive product information without the need for Wi-Fi after download. Users can download the app for free, in seconds, from itunes and Google Play stores for iphone, ipad, and android devices. The Redeem on the Go App allows tilers who are collecting Weber Rewards points from their tile fixing products to scan or manually enter the special codes to their account in order to redeem points in return for gifts and experiences. Weber is present on the key social media networks with a YouTube channel providing access to many how-to videos offering excellent hints and tips, supporting our full training programme. Regular content on Facebook and Twitter keep followers up-to-date on new products, news and case studies. Pinterest offers users inspiration in the form of photos and video whether it is ideas for a beautiful tiled bathroom or render colours for a self-builder.
Saint-Gobain Weber Dickens House, Enterprise Way, Maulden Road, Flitwick, Bedfordshire MK45 5BY Technical Academy Enquiries: 0115 945 1154 Email: technical.academy@saint-gobain.com www.netweber.co.uk www.saint-gobain-technical-academy.co.uk @SGWeberUK Rev 11/16