MATERIAL SAFETY DATA SHEET Form WI04-11A Rev. 2

Similar documents
1. Product and Company Identification MSDS Code Number N/A. Date of Last Revision Manufacturer. Address

MATERIAL SAFETY DATA SHEET Form WI04-11A Rev. 1

2. Hazard(s) Identification. 3. Composition/Information on Ingredients Hazardous Components C.A.S. Number Exposure Limits %

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

MATERIAL SAFETY DATA SHEET

*MATERIAL SAFETY DATA SHEET*

MATERIAL SAFETY DATA SHEET

7. HANDLING and STORAGE

MATERIAL SAFETY DATA SHEET

*MATERIAL SAFETY DATA SHEET*

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No , Cutting Fluid, Soluble Oil Issue Date ( ) Review Date ( )

SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SHINE MASTER POLISH & SEALANT MSDS DATE: 01/04/2006

SAFETY DATA SHEET Liquid Iron Control Out Sour. 1. Product and Company Identification. 2. Hazards Identification

1. Product and Company Identification. Date of Last Revision. Manufacturer. Petroleum Hydrocarbon. Address. 2. Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET SSP548-65

Safety Data Sheet Product No DMP-30, DMP-30 Kit Components Issue Date ( ) Review Date ( )

Section 2: Composition / Information on Ingredients Principle Component(s) (chemical and common name(s)) (Cas. No) % OSHA PEL mg/m3

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

<Product> ACE HARDWARE ELECTRONIC DUSTER, 09870, CRC # *********************** EMERGENCY PHONE #: ************************

Safety Data Sheet Product No Santovac 5, Diffusion Pump Oil Issue Date ( ) Review Date ( )

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet HOCUT 797-HM

SAFETY DATA SHEET FILE NO.: HY-D DRY WATER SOLUBLE SDS DATE: 05/28/15

Formosa Plastics Corporation, Texas Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

1. Chemical Product and Company Identification

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET FILE NO.001 NAME OF PRODUCT MSDS DATE: 11/06/14 MASTERLINE. MasterLine Mouse Glue Board MasterLine Rat Glue Tray

MATERIAL SAFETY DATA SHEET FILE NO.: 679 NAME OF PRODUCT MSDS DATE: 7/2/12

Item No: Item Desc: Shared MSDS s (Item No): MSDS Origin

*There are no components with workplace exposure limits. This is not a hazardous material as defined in the OSHA Hazard Communication Standard.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

LIVINGSTONE INTERNATIONAL PTY LTD 100% PROUDLY AUSTRALIAN OWNED SINCE 1984 ABN:

MGC ADVANCED POLYMERS, INC. SAFETY DATA SHEET Page 1 of 6

2. Hazard(s) Identification. 3. Composition/Information on Ingredients Hazardous Components C.A.S. Number Exposure Limits %

Safety Data Sheet. Golden West Throttle Body, Choke Carburetor Cleaner SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

VIPER INTERNATIONAL Ph (269) th Ave. Gobles, MI Material Safety Data Sheet VIPER S VENOM

FILE NO.: NAME OF PRODUCT TITAN PISTON LUBE SDS DATE: 02/01/2017 WHMIS CLASS AND DESCRIPTION: THESE PRODUCTS ARE NOT REGULATED BY THE WHMIS.

Material Safety Data Sheet Product No to Pelco NanoXact Silver Colloids, 20 to 110 nm Size Nanoparticles, Citrate

Safety Data Sheet. Section 1 - Product and Company Identification

SAFETY DATA SHEET SDS DATE: June 1, 2015

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET MIST-N-SHINE PROFESSIONAL DETAILER MSDS DATE: 1/4/2006

1. COMPANY AND PRODUCT IDENTIFICATION 2. HAZARDS IDENTIFICATION

Material Safety Data Sheet

GAF Safety Data Sheet SDS # 2085 SDS Date: December 2014

MATERIAL SAFETY DATA SHEET FILE NO.: 640 NAME OF PRODUCT MSDS DATE: 2/24/12

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Section 1 - Product and Company Identification

MATERIAL SAFETY DATA SHEET TRIM CLEAN 2029HW. Removal of metalworking fluids from machine tools and parts

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION. Foremost 8538-ES Good Scents Bowl Clip. INFOTRAC (International) (North America)

Material Safety Data Sheet RUST VETO 4214-W

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION. Foremost 8537-ES Good Scents Air Freshener

1. COMPANY AND PRODUCT IDENTIFICATION 2. HAZARDS IDENTIFICATION

GHS SAFETY DATA SHEET (SDS)

Eye and Skin Contact; Ingestion; Inhalation & Skin absorption

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

SAFETY DATA SHEET. FILE NO.001 NAME OF PRODUCT MSDS DATE: 01/01/2016 CATCHMASTER Brand Adhesive Devices

TRISOTECH G ROOF INSULATION 1.0" Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

MATERIAL SAFETY DATA SHEET

GAF Safety Data Sheet SDS # 2098A SDS Date: December 2014

SAFETY DATA SHEET. Avalanche. DISTRIBUTOR 24 HR. EMERGENCY TELEPHONE NUMBERS Simplex Products

Breaks down contaminates as soon as they enter your spa.

MATERIAL SAFETY DATA SHEET Nickel Titanium SECTION 5 FIRE FIGHTING PROCEDURES SECTION 6 ACCIDENTAL RELEASE MEASURES SECTION 7 HANDLING AND STORAGE

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Safety Data Sheet. Section 1 - Product and Company Identification

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/31/2010 POWER CLEAN ALL-PURPOSE CLEANER

Safety Data Sheet. Golden West Hydraulic Oil R&O 150 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet Whisk Hand Cleaner 200. Page 1 Whisk Products, Inc. Revised: November 24, 2014

Safety Data Sheet. Golden West Hydraulic Oil R&O 46 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MSDS - Material Safety Data Sheet Product Name: PTFE THREAD SEAL TAPE

Material Safety Data Sheet

SAFETY DATA SHEET. Hair & Body Shampoo. DISTRIBUTOR 24 HR. EMERGENCY TELEPHONE NUMBERS IDC Corporation

MATERIAL SAFETY DATA SHEET I. CHEMICAL PRODUCT. REVISED: March 16, 2005 FOAM-X II. COMPOSITION, INFORMATION OR INGREDIENTS

Material Safety Data Sheet

: TPA WALKWAY ROLL-GRAY 3' x 60' 72 mil

Metal Mate. Material Safety Data Sheet. Updated: 12/08. Quality You Can Trust Since From North America s Largest Roofing Manufacturer

MATERIAL SAFETY DATA SHEET

PECAN SHELLPOWDER SAFETY DATA SHEET. Page 1 of 5. MSDS for # ARTMOLDS POWDER. Date: 4/21/2015 Version: 1.0

Material Safety Data Sheet RUST VETO 4295-PT

D MATERIAL SAFETY DATA SHEET Page 1 of 5 SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Transcription:

Trade Name & Synonyms GAC Elastomeric Thread Chemical Name Polyurethane Polyester Elastomer. Chemical family: Thermoplasticpolyurethane. Formula: - Polymeric Material C.A.S. Number 26375-23-5 Grades or Minor Variant Identities Product Use (for Canada) 1. Product and Company Identification MSDS Code Number GAC-025,GAC-030,GACC-025,GACC-030,GACH-025,GACH- 030,GACHC025,GACHC-030 Manufacture / Distributor GAC International Inc. Address 355 Knickerbocker Ave. Bohemia, NY USA 11716 Information Telephone Number 1-631-419-1700 Emergency Telephone Number 1-631-419-1700 2. Composition of Ingredients Hazardous Components C.A.S. Number Exposure Limits % 26375-23-5 99 Emergency Overview Potential Health Effects: 3. Hazard Identification This product has non-hazardous ingredient as defined under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR 1910 1200. Routes of Exposure Signs and Symptoms Single, Repeated, or Lifetime Exposure Severity (Mild, Moderate, Severe) Acute and Chronic Health Effect(s) Target Organ(s) Eye Acute eye contact: Mechanical irritation. Chronic eye contact: Skin Inhalation Acute inhalation: No significant health hazard. Chronic inhalation: Ingestion Human effects and symptoms of over exposure:. Exposure limits:. Medical Conditions Aggravated by Exposure Carcinogenicity (IARC, NTP) Potential Environmental Effects 4. First Aid Measures Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects Eye Skin Inhalation Ingestion Note to Physicians (Treatment, Testing, and Monitoring) Page 1 of 5

Flashpoint & Method: C / F Flame Propagation or Burning Extinguishing Media 5. Fire and Explosion Data Flammable (Explosive) Limits in Air LEL: UEL: Properties Contributing to Fire Intensity Protection and Procedures for Firefighters Unusual Fire and Explosion Hazards Autoignition Temperature Flammability Classification Health- 0 Flammability1, Reactivity-0 0=Minimal, 1=Slight, 2= Moderate, 3= Serious, 4= Severe Extinguishing Media to Avoid Containment Techniques Spill/Leak Clean-Up Procedures and Equipment Remove by mechanical means. Evacuation Procedures Special Instructions Reporting Requirements Handling Practices and Warnings Store in sealed containers. Protect from atmospheric moisture. Storage Practices and Warnings Storage temperature: Ambient. Shelf life: 2 years. Special sensitivite : 6. Accidental Release Measures 7. Handling and Storage Page 2 of 5

Ventilation 8. Exposure Control/Personal Protection Engineering Controls Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies: Eye/Face Skin required. Inhalation General Hygiene Considerations and Work Practices Protective Measures During Repair and Maintenance of Contaminated Equipment Protective Measures and Equipment 9. Physical and Chemical Characteristics Appearance Solid. Color: Various F.D.A allowable colors. Odor Odorless. Normal Physical State: Boiling Point C / F Liquid Gas Melting-Freezing Point C /390-440 F Solid () Specific Gravity or Density (H 20=1) Approximately 1.2 Vapor Pressure (mm Hg @ 20 C) Bulk density: Approx. 10.01 LBS/GAL % Volatile by volume: Solubility in Water Insoluble Vapor Density (AIR= 1) ph Evaporation Rate (Butyl Acetate = 1) Incompatibility (Materials to Avoid) known. Instability conditions: known. Hazardous Products Produced During Decomposition 10. Stability and Reactivity Data By fire; Carbon Monoxide(CO), Carbon Dioxide (C02), Oxides of nitrogen (NOx), Traces of hydrogen cyanide (HCN), amines, nitriles, Tetrahydrofuran, and Cyclopentanone. Traces of MDI, Aliphatic and Aromatic hydrocarbons, Aldehydes and acids may also be formed. Hazardous Polymerization? May Occur Stability? Stable May Not Occur Unstable Conditions to Avoid C / F Conditions to Avoid C / F Page 3 of 5

11. Toxicological Information Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data Emergency overview: CAUTION: Contact with hot material will cause thermal burns; Toxic gases/fumes are given off during burning or decomposition and may cause allergic skin and respiratory reaction; melted product is flammable and produces intense heat and dense smoke during burning. 12. Ecological Information Toxicity, Environmental Fate, Physical/Chemical Data, or Data Supporting Environmental Hazard Statements. Regulations 13. Disposal Considerations Properties (Physical/Chemical) Affecting Disposal Waste disposal method: In accordance to federal, state or local regulations. Regulated for shipping? No 14. Transport Information Proper Shipping Name SQ ENERGY THREAD 25X25 25' GRY Do changes in quantity, packaging, or shipment method change product classification? No Freight class bulk:. Freight class package:. Product label: Packing Group Hazard Class Non-hazardous. Identification Number Not hazardous by D.O.T regulations. Federal Regulations SARA TITLE III: SECTION 302 Extremely hazardous substances:. SECTION 311/312. Hazard categories :. SECTION 313 Toxic chemicals:. RERA STATUS: Non-hazardous. International Regulations HMIS RATINGS: Health 0 Flammability 1 Reactivity 0 0=Minimal, 1= Slight, 2= Moderate, 3= Serious 4=Severe 15. Regulatory Information Page 4 of 5

Supplier Number: 31/ 34 16. Information Supplier Release: January 7, 2003. Rev1. = not applicable. = not available, N/E = not established. N/D = not determined. Page 5 of 5