B-16
B-16 FT, FB, FI and FW
B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact points. Strainer element: the strainer is cup-shaped and includes an inner cup-shaped support structure having staggered perforations extending through the surfaces thereof, an outer cup-shaped strainer structure constructed of wire mesh is closely received over the support structure. nominal pore size: the element nominal pore size is normally calculated from the pressure required to cause air to bubble from the largest pore in the filter element when submerged in a test liquid. Features Tee-type FT Filter element replaceable without removing body from system Union bonnet design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 90L SS and Brass Variety of end connections available Bypass FB Bypass port at filter bottom for the ease of sampling or purging Union bonnet design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 90L SS and Brass Variety of end connections available In-line FI Compact and space-saving design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 3000 psig (0 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 31 SS, 90L SS and Brass Variety of end connections available ll-welded In-line FW Large filtration area and high flow coefficient ll-welded construction for elimination of leakage Easy cleaning of filters by backflushing Full-penetration weld between body and filter element Nominal pore sizes for sintered element: 0.5 μm Nominal pore sizes for strainer element:,, 15 and 0 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS and 90L SS Variety of end connections available
B-16 Pressure vs. Temperature Temperature ( C) - 3 93 1 0 60 315 31 6 000 3 6000 FT, FB, FW 316 SS 1 5000 35 Pressure (psig) 000 3000 000 FI 316 SS FT, FB Brass 6 0 13 Pressure (bar) FI Brass 69 0 0-0 00 300 00 500 600 00 00 900 Temperature ( F) Contact FITOK Group or our authorized distributors for curve graph of other materials. FT FB FI FW 1 1 Inlet 3 5 6 Inlet Bypass port 3 5 6 Inlet 3 1 Inlet 1 Standard Materials of Construction Component 316 SS Material Grade/STM Specification Brass 1 Body F316 SS/1 (FT, FB ), 316 SS/9 (FI, FW ) Brass C300/B3 (FT, FB ) Brass C36000/B16 (FI ) 3 Gasket Spring Sintered 316 SS or strainer 316 SS 316 SS/9 with PTFE/D110 coating or silver-plated 30 SS/313 Sintered 316 SS or strainer 316 SS PTFE/D110 or aluminum/b09 30 SS/313 5 Bonnet Nut 316 SS/9 C36000/B16 6 Backup Ring Stainless steel Bonnet 316 SS/9 C36000/B16 1. FW filters not available in brass. Lubricants: molybdenum disulfide-based and silicone-based o o Maximum Differential Pressure of Clean Filter at 0 F (0 C) FT, FB, FI FW 0.5 micron micron micron 15 micron 50 (155.) 600 (1.) 50 (155.) (6.9) 1950 (13.5) (6.9) 150 (10.) (6.9) Maximum Differential Pressure psig (bar) 0 micron 60 micron 0 micron micron 150 micron 50 micron 50 micron 1150 (9.3) 1150 (9.3) (69.0) (69.0) (69.0) (69.0) (69.0)
B-165 Filter s Filter elements remove 95 % of particles larger than the nominal pore size. Nominal Pore Size μm 0.5 15 0 60 0 150 50 50 Pore Size Range μm 0.5 to 1 to 5 to 10 11 to 5 35 to 53 50 to 5 0 to 95 Type Sintered Sintered or Strainer Strainer Filtration rea FT, FB FT, FB 6FT, 6FB FT, FB FI FI 6FI FI FW Orifice in. (mm) 0.09 (.0) 0.1 (.) 0.1 (5.) 0.5 (6.) 0.09 (.) 0.19 (.) 0. (.1) 0.1 (10.3) 0.19 (.) Filtration rea in. (mm ) Sintered 1.30 (30) 1.30 (30).00 (10).00 (10) 0.55 (350) 1.30 (30).00 (10).00 (10) Strainer 1.00 (60) 1.00 (60) 1.0 (1090) 1.0 (1090) 1.00 (60) 1.0 (1090) 1.0 (1090) 0.39 (5) 0.39 (5)
B-166 Dimensions FT o 5 D C B E F Hex Mounting Holes M5 X 0. - 6H Threads 0.5 (6. mm) Deep Basic Ordering Number Connection Type and Size Filter Dimensions, in. (mm) Inlet B C D E F FT -FL- FT -FL- 1/" FITOK 1/" FITOK 1/" FITOK 1/" FITOK FT FT. (5.). (6.) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FL6- FT -FL- 3/" FITOK 1/'' FITOK 3/" FITOK 1/'' FITOK FT FT. (.1) 3.0 (.) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -ML6- FT.6 (6.5) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -ML- mm FITOK mm FITOK FT. (.1) FT -ML10-10 mm FITOK 10 mm FITOK FT.6 (.6) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -ML1-1 mm FITOK 1 mm FITOK FT 3.0 (.) FT -TS- 1/" TS 1/" TS FT FT -TS6- FT -TB- 3/" TS 1/" TB 3/" TS 1/" TB FT FT 1.6 (.) FT -TB6-3/" TB 3/" TB FT 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FNS- 1/ Female NPT 1/ Female NPT FT.00 (50.) FT -FNS- FT -NS- 1/ Female NPT 1/ Male NPT 1/ Female NPT 1/ Male NPT FT FT.13 (5.1) FT -NS6- FT -NS- 3/ Male NPT 1/ Male NPT 3/ Male NPT 1/ Male NPT FT FT.3 (60.5).5 (69.9) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -FR- 1/ Male FR 1/ Male FR FT.30 (5.) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FR- 1/ Male FR 1/ Male FR FT.55 (6.) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) Mounting holes not available with 1/ female NPT end connections
B-16 FB o 5 D C E B F Hex Bypass Port Mounting Holes M5 X 0. - 6H Threads 0.5 (6. mm) Deep Basic Ordering Number Connection Type and Size Inlet Filter Dimensions, in. (mm) B C D E F Bypass Port FB -FL- FB -FL- 1/'' FITOK 1/'' FITOK 1/'' FITOK 1/'' FITOK FB FB. (5.). (6.) 1.9 (50.) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FL FB -FL6- FB -FL- 3/'' FITOK 1/'' FITOK 3/'' FITOK 1/'' FITOK FB FB. (.1) 3.0 (.). (69.1) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL6 FL FB -ML6- FB.6 (6.5) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FB -ML- mm FITOK mm FITOK FB. (.1). (69.1) FL6 FB -ML10- FB -ML1-10 mm FITOK 1 mm FITOK 10 mm FITOK 1 mm FITOK FB FB.6 (.6) 3.0 (.) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL FB -TS- 1/'' TS 1/'' TS FB FB -TS6- FB -TB- 3/'' TS 1/'' TB 3/'' TS 1/'' TB FB FB 1.6 (.) 1.3 (56.) TB FB -TB6-3/'' TB 3/'' TB FB 0.3 (9.) 1.00 (5.) 1.00 (5.) 1 (5.) FB -FNS- 1/ Female NPT 1/ Female NPT FB.00 (50.) FB -FNS- FB -NS- 1/ Female NPT 1/ Male NPT 1/ Female NPT 1/ Male NPT FB FB.13 (5.1) 1.1 (3.) FNS FB -NS6- FB -NS- 3/ Male NPT 1/ Male NPT 3/ Male NPT 1/ Male NPT FB FB.3 (60.5).5 (69.9) 0.6 (11.).00 (50.) 1.13 (.) 1.13 (.) 1 1/ (.6) FB -FR- 1/ Male FR 1/ Male FR FB.3 (60.5) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FB -FR- 1/ Male FR 1/ Male FR FB.5 (69.9) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL Mounting holes not available with 1/ female NPT end connections
B-16 FI F Hex Basic Ordering Number Connection Type and Size Dimensions Filter in. (mm) Inlet F FI -FL- 1/'' FITOK 1/'' FITOK FI.35 (59.) 9/16 (1.3) FI -FL- 1/'' FITOK 1/'' FITOK FI.95 (.9) 3/ (19.1) FI -FL6- FI -FL- 3/'' FITOK 1/'' FITOK 3/'' FITOK 1/'' FITOK FI FI 3.1 (1.5) 3.9 (.6) 1 (5.) F Hex FI -ML3-3 mm FITOK 3 mm FITOK FI.3 (60.5) 9/16 (1.3) FI -ML6- FI.96 (5.) 3/ (19.1) FI -FNS- 1/ Female NPT 1/ Female NPT FI.16 (5.9) 9/16 (1.3) FI -FNS- 1/ Female NPT 1/ Female NPT FI. (.9) 3/ (19.1) FI -NS- FI -NS- 1/ Male NPT 1/ Male NPT 1/ Male NPT 1/ Male NPT FI FI 1. (.).69 (6.3) 9/16 (1.3) FI -FR- FI -FR- 1/ Male FR 1/ Male FR 1/ Male FR 1/ Male FR FI FI.9 (0.) 3/ (19.1) FI -FRT- 1/ Female BSPT 1/ Female BSPT FI.16 (5.9) 9/16 (1.3) FI -FRT- 1/ Female BSPT 1/ Female BSPT FI. (.9) 3/ (19.1) FI -RT- 1/ Male BSPT 1/ Male BSPT FI 1. (.) 9/16 (1.3) FI -RT- 1/ Male BSPT 1/ Male BSPT FI.69 (6.3) 3/ (19.1) FW F Hex Basic Ordering Number Connection Type and Size Dimensions Orifice in. (mm) in. (mm) Inlet F FW -FL- FW -ML6-1/'' FITOK 1/'' FITOK 0.19 (.5).15 (5.6) FW -FNS- 1/ Female NPT 1/ Female NPT 0.5 (11.5) 1.5 (39.9) 1 (5.) FW -NS- 1/ Male NPT 1/ Male NPT 0. (.1) 1.9 (.0) FW -FR- 1/ Male FR 1/ Male FR 0.19 (.5).0 (51.) 1. FITOK means FITOK double ferrule tube fittings, FR means metal gasket seal fittings, TS means fractional tube socket weld, TB means fractional tube butt weld.. Sizes and types listed are standard. Other sizes and types are available upon request. 3. Dimensions are shown with FITOK nuts finger-tightened. ll dimensions are for reference only and are subject to change. For dimensions not shown above, please contact FITOK Group or our authorized distributors.
B-169 Ordering Number Description FBSS - FL - ML10 - S -P 150 - FLSF Body Material Inlet Type Inlet Size Type Size Type Gasket Material Nominal Pore Size Bypass Port (for FB Only) Special pplication Cleaning and Packaging FT FB FI FW SS 316 SS 6L S L 316L SS 30 SS 30L SS S1 31 SS B Brass 90L 90L SS FNS NS FRT RT FMS MS FRP BP FL ML TS TB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Fitting Metric Tube Fitting Fractional Tube Socket Weld Fractional Tube Butt Weld 6 10 1 1/" 1/" 3/ " or 6 mm 1/ " or mm 10 mm 3/ " or 1 mm Same as Inlet Specified in the same way as the inlet type and size S Sintered Strainer Silver-plated 316 SS for FT, FB, FI P PTFE-plated 316 SS for FT, FB, FI luminum for FT, FB, FI (the only option for brass body) W No-plated 316 SS for FT, FB, FI 05 15 0 60 0 150 50 50 0.5 μm (Sintered) μm μm 15 μ m 0 μ m 60 μ m 0 μ m μ m 150 μ m 50 μ m 50 μ m Note: "Ordering Number Description" is a reference to understand the combination rules of FITOK product part number. Not all combinations are available. FL FL TS FL6 FL 1/ Female NPT 1/ " Fractional Tube Fitting 1/ " Fractional Tube Fitting 1/ " Tube Socket Weld 3/" Fractional Tube Fitting 1/" Fractional Tube Fitting S No NCE MR015 F FC-01 FC-0 FR Male FR Fitting 1. Standard thread pitch for metric threads are as follows: M and below: mm M o M mm 10 1 1 t : 1.5 M and above: mm Standard thread pitch should be ignored in the ordering number, others should be specified.. Cleaning and Packaging: FC-01 Standard cleaning and packaging for basic industrial procedures. FC-0 Special cleaning and packaging for wetted system components to ensure compliance requirement as stated in STM G93 Level C.
B-10 s Ordering Number Description SSE-SN-60 Material Part Name Type Nominal Pore Size SS 316 SS E SN Sintered ST Strainer (only for sintered) 05 0.5 μm (sintered) μm μm 15 15 μm 0 0 μm Note: "Ordering Number Description" is a reference to understand the combination rules of FITOK product part number. Not all combinations are available. 60 0 150 50 50 60 μm 0 μm μm 150 μm 50 μm 50 μm
FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +9 69 900 9 Fax: +9 69 900 95 FITOK, Inc. 133 North Promenade Blvd., Suite 50, Stafford, Texas, US Tel.: +1 1 00 Fax: +1 1 5 051 FITOK Incorporated Block C, Zone E, Yingtai lndustrial Park, Dalang Street, Longhua New District, Shenzhen, 51109, China Tel.: +6 55 03 500 Fax: +6 55 03 619 FITOK Middle East Oil Equipment Trading LLC 0-09, Makateb Building, irport Road, P.O.Box 151, Deira, Dubai, UE Tel.: +91 959 53 Fax: +91 959 5 info@fitokgroup.com www.fitokgroup.com FK-IC-GV-13-EN-101