DigiTest II Automatic Motorized Hardness Testing System www.worldoftest.com/automatic-motorized-durometer DIN ISO 719, DIN EN ISO 88,, DIN ISO 27588, NFT 4-003, JIS K 253 The most accurate and versatile hardness tester on the market, DigiTest positions itself as the top level Shore/IRHD hardness tester with a modular design to suit virtually every Shore or IRHD hardness measurement scale for Polymers. The automatic test procedure of DigiTest eliminates the operator s test influence on test procedure and thus always provides the most accurate results. Depending on the hardness scales of your choice, from any of Shore scales A, A0, B, 0, C, D, D0, 00, 000, 000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH, you can select the most cost effective combination of required test heads, and expand and upgrade it at any time in the future. The extensive range of accessories including centering devices, software, as well as Combo Test heads, provide the most comprehensive package for your high precision measurements at a reasonable cost. New pick-up bracket and new electronic unit Older test stands and measuring devices can be used with the new pick-up bracket and electronic unit. Features Electronic unit provides clear display of measured value, navigation menu and Data Output. Easy to use with limited operator influence to guarantee accurate and repeatable hardness test results. Reading in the display gives assistance for the correct selection of the measuring device during your measurement when the measured value is above or below the limit value. USB-interface for data transfer. Modular, digital hardness testing system. Automatic identification of the measuring range and of the measuring time Integratable in an automatic production process. Hysteresis function Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211
Range of Applications Test Method Range of Application Standard Minimum material thickness [mm] Indenter (mm) Rubber- and plastics hardness DIN EN ISO 88 4 DIN ISO 719,, NFT 51-174, BS903 Part. A 2 Shore A soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc... Shore A0 Shore E see Shore A DIN ISO 719 M Shore A see Shore A Qualitest standard Shore D hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, celluloseacetate, etc... DIN EN ISO 88 DIN ISO 719,, NFT 51-174, BS903 Part. A 2 Qualitest standard 0,5 4 M Shore D/C/D0 see Shore D 0,5 Shore B middle hard materials from rubber, typewriter roles, flat materials Shore C plastics and middle hard rubber materials Shore D0 plastics and middle hard rubber materials Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211 1,5
Shore D0 plastics and middle hard rubber materials Shore 0 soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon Shore 00 Shore 000 Shore 000 S see Shore 00 / 000 IRHD M thin walled O-rings, moulded parts, standard plates NFT 4-003, BS903 Part. A 2 Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211 0,
IRHD H see Shore D NFT 4-003, BS903 Part. A 2 IRHD N soft rubber, high elastic materials, plastic ductile materials NFT 4-003, BS903 Part. A 2 IRHD L NFT 4-003, BS903 Part. A 2 10 VLRH DIN ISO 27588 2 Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211
Measuring Device IRHD N/H/L Shore 00/000 For soft rubber, highly elastic materials and plastically deformable materials of a material thickness from up to 10 mm For sponge and cellular rubber, foam rubber, silicone, similar to gel materials from a material thickness of mm IRHD L from 10 up to 12 mm Hysteresis function VLRH Shore A/B/0 For sponge and cellular rubber, foam rubber, silicone, similar to gel materials from a material thickness of 1 mm Hysteresis function For concave and convex moulded parts of a material thickness of 4 or mm Shore D/C/D0 Shore A/D For moulded parts of a material thickness of 4 or mm For flat plate materials of a material thickness of 4 or mm Micro shore D from a minimum thickness of 1 mm Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211 Micro shore A from a minimum thickness of 1 mm
Quick Centering Device Barofix Centering device for a quick centering of Orings of a cord diameter between 0, to 5,0 mm Outer diameter to 50 mm Barofix With plexiglas plate (200 x 200 mm) and a sample clamping device Quick centering device for O-Rings with a cord diameter from 0. to 8.0 mm and max. outer diameter of 200 mm Plexiglas plates with different sizes are available. Barofix II (Compatible with digitest II only) Automatic centering device for quick centering of O-rings of a cord diameter between 1,0 to 5,0 mm or 4,0 to 20 mm Centrofix Centering device for quick centering of rubber tubes or hoses Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211
Selection Guide: A complete tester consists of : Test Stand Control Box Pick-up Bracket One or several interchangeable test heads depending on application, test heads available for Shore scales A, A0, B, 0, C, D, D0, 00, 000, 000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH (See Separate price sheet) One or several centering devices depending on application Optional software or keyboard interface (for export of results to excel w/o software) Toll-Free: 1.877.884.TEST (8378) Fax: 954.97.8211