Short Wavelength Laboratory Sources MP0601 Start date: 21/02/2007 End date: 01/10/2011 (includes a 6 month extension) Year: 4

Similar documents
Enhancement of extreme ultraviolet emission from laser irradiated targets by surface nanostructures

Grant holder Secretary

Dr. Altaf H. Carim. Scientific User Facilities Division Office of Basic Energy Sciences Office of Science U.S. Department of Energy

Skills and excellence formation on basis of Laboratory of Plasma Physics & Atomic Spectroscopy Institute of Spectroscopy (ISAN) of Russian Academy of

Full report available at genomicscience.energy.gov/userfacilities/structuralbiologyworkshop/

Laser Produced Plasma for Production EUV Lithography

Eric W. Abelquist, Ph.D., CHP President, Health Physics Society. August 2017

(One) latest development(s)

Simultaneous Reflection and Transmission Measurements of Scandium Oxide Thin Films in the Extreme Ultraviolet

The European Cluster of Advanced Laser Light Sources

Conversion efficiency of 6.X nm Emitted from Nd:YAG and CO 2 Laser Produced Plasma

X-RAY EMISSION IN THE HIGH-CURRENT GLOW DISCHARGE EXPERIMENTS

The liquid-metal-jet anode provides unprecedented brightness. Oscar Hemberg

Guest editorial: special issue on nonthermal medical/biological applications using ionized gases and electromagnetic fields

REQUIREMENTS FOR COMMERCIAL PARTICLE ACCELERATORS IN RADIATION THERAPY

High-power DPP EUV source development toward HVM

EQ-10 EUV Source for Actinic Defect Inspection Panel Discussion. Debbie Gustafson

Experiment 2b X-Ray Diffraction* Optical Diffraction Experiments

CD-1, Approval of Preliminary Baseline Range for the Linac Coherent Light Source at the Stanford Linear Accelerator Center

The COST Action MP1105 on Flame Retardancy: A European opportunity for Cutting Edge Research

Research Thrust to Address Major Measurement Gaps

P25 Surface Engineering

Photoacoustic Imaging in Biomedicine Critical Review by Saurabh Vyas Group 9: Interventional Photoacoustic Ultrasound CIS II: 600.

photonics4life: Women in Biophotonics

Sustainable production of high-quality cherries for the European market FA1104 Start date: 16/04/2012 End date: 15/04/2016 Year: 2 José Quero Garcia

In situ semi-quantitative assessment of single cell viability by resonance

FEL Irradiation Tolerance of Multilayer Optical System

Basic principles of quantification using optical techniques

Biomedical engineering (BME) is the application of engineering principles and design concepts

Cell analysis and bioimaging technology illustrated

3rd International Conference on Lasers, Optics & Photonics

Trends in high magnetic fields

Shaped Femtosecond Laser Pulse Spectroscopy for Nuclear Forensics. Phyllis Ko ANS Student Conference 2011

Scientific Basis of Air Conditioning

1 st generation Laser-Produced Plasma 100W source system for HVM EUV lithography

Biophotonics. Light Matter Interactions & Lasers. NPTEL Biophotonics 1

Nanyang Technological University Division of Physics and Applied Physics

Infor Introduction at European XFEL

EXCELLENCE 1.1 Quality, innovative aspects and credibility of the research (including inter/multidisciplinary aspects)

Multilayer Development for Extreme Ultraviolet and Shorter Wavelength Lithography

Plasma and Beam Equipment for Materials Processing (Education and Science)

LIBS Spectral Data for a Mixed Actinide Fuel Pellet ContainingUranium, Plutonium, Neptunium and Americium

Nayar Prize I Quarterly Progress Report (Quarters 2&3) August, 2016

Nuclear Engineering at UNSW. Graham Davies

EUVL Activities in Korea. Jinho Ahn Professor, Hanyang University Director, National Research Foundation of Korea

TEA Cost Action no Transport Equity Analysis: Assessment and integration of equity criteria in transportation planning. Bruxelles, April 10

Extending the Process Limits of Laser Polymer Welding with High-brilliance Beam Sources POLYBRIGHT. Alexander Olowinsky

Super Resolution Microscopy - Breaking the Diffraction Limit Radiological Research Accelerator Facility

Master Erasmus+ EUROPHOTONICS-POESII (

School of Geography, Earth & Environmental Sciences, University of Birmingham Athena Bronze Action Plan, January 2014-December 2016

E-Beam Coating Technology for EUVL Optics

A TECHNICAL ADDENDUM F. to the MEMORANDUM OF UNDERSTANDING. between the STANFORD LINEAR ACCELERATOR CENTER. and the

EUV Technology, Martinez, CA

DC FPS. By Martin Greimel, Rapporteur to FP 0802 MC Meeting, 7 th October 2010, Hamburg. European Cooperation in Science and Technology FPS

More on VLSI Fabrication Technologies. Emanuele Baravelli

A New Cellular and Molecular Engineering Curriculum at Rice University

Submission to the House of Lords European Union Commission's White Paper "Strategy for a future Chemicals Policy"

Performance Modeling for Space-based Observations of Forest Fires using Microbolometers

University of Massachusetts Amherst

Structural Biology. Single crystal X-ray diffraction and SAXS. Systems designed for structural biology

EUV optics lifetime Radiation damage, contamination, and oxidation

College of Science and Health. SABBATICAL LEAVE APPLICATION University of Wisconsin-La Crosse. Biochemistry

ProDoc guidelines for PhD candidates at the University of Twente

Awareness session Funding opportunities under Horizon 2020 Marie Skłodowska-Curie 13 September 2013 Laboratório Associado de Oeiras ITQB-UNL, Oeiras

Teaching Nuclear Engineering to Electrical Engineering Students

Solutions with Light. Energy and environment, Information and communication, Healthcare and medical technology, Safety and mobility.

Interface quality and thermal stability of laser-deposited metal MgO multilayers

Determination of Optical Parameters in Biological Tissues and. Application to Medical Imaging

CHEMOMETRICAL ANALYSIS OF ENDOMETRIAL TISSUE FLUORESCENCE SPECTRA

On dose related issues in XFELs vs. ERLs

CLOSING DATE: 27 TH SEPTEMBER 2013

Next Generation Source Power Requirements. Erik R. Hosler

Deliverable 2.1: Definition of paradigms representing exemplary breast lesions cases

Laser-based process for polymeric coatings on temperaturesensitive

MEDICAL PHYSICS (MED PHYS)

POSITION DESCRIPTION Royal BC Museum

IMAGING TECHNOLOGIES FROM SWITZERLAND ETH BOARD

news from the EUV ERC

Reliability Prediction Modeling of Semiconductor Light Emitting Device

Why do clinicians love 3+3? How do we help them de-love it? How to properly model late onset toxicity?

Molecular Diagnostics

FNCA Activities and HRD Projects

Prof. Dr. Dr. Karl Siegfried Boos. 18 th September th October 2014

Synergy: Unpacking my Research Experience in the Schenkman Lab. My work on my bioengineering senior capstone project in the Schenkman lab is much

Contributions within Discipline

Technical Proposal. A UV Laser Setup for Thinning Radiator Diamonds for GlueX

Subject Minutes of the Fourth Management Committee Meeting of COST Action IC1301 Wireless Power Transmission for Sustainable Electronics (WiPE)

EUV Transmission Lens Design and Manufacturing Method

Illustration inspired by the work of John Maynard Keynes Springer Nature Nano/AdisInsight. Daria Iovcheva November, 2017

Recovery strategies for mirrors with boron carbide-based coatings for 6.x nm lithography

LUSI Status LCLS SAC February 13, J. B. Hastings

JOHN ADAIR: ACTION-CENTRED LEADERSHIP.

Special Techniques 1. Mark Scott FILM Facility

Experts in Femtosecond Laser Technology. DermaInspect. Non-invasive multiphoton tomography of human skin

48 th MEETING OF THE LNF SCIENTIFIC COMMITTEE

EUV Transmission Lens Design and Manufacturing Method

Stress Mitigation of X-ray Beamline Monochromators using a Topography Test Unit

Seth Blumsack, Ph.D. Associate Professor of Energy Economics and Policy John and Willie Leone Family Department of Energy and Mineral Engineering,

Use of Flash Simulations to Enhance Nanotechnology Education

Polarizing and non-polarizing mirrors in far UV for the Hydrogen Lyman-α radiation (λ = 121.6nm)

Transcription:

www.cost.esf.org European Cooperation in the field of Scientific and Technical Research Short Wavelength Laboratory Sources MP0601 Start date: 21/02/2007 End date: 01/10/2011 (includes a 6 month extension) Year: 4 Alan Michette MC Chair King s College London / UK www.shortwavelengthsources.net

Action Parties 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 13 13 15 16 YR 1 YR 2 YR 3 YR 4 Grant Holder: N/A GH Institution GH Representative GH Country NB: Does not include Russia & Turkey; both have made major contributions; Presentations were also made at WG meetings by colleagues from the USA. Japan and China. 2

Action participants 200 180 160 140 120 100 80 60 40 20 0 201 155 83 102 69 94 26 36 35 22 13 5 6 8 11 12 YR 1 YR 2 YR 3 YR 4 Total of individual participants ESRs Female Non-COST Countries Note that the (>)17% of female participants is larger than current overall contributions to research in Physics based subjects. Many of the female participants are also ESRs. 3

Use of COST instruments YR 1 YR 2 YR 3 YR 4 No. of MC / WG meetings 3/2 2/2 2/2 2/3 No. of STSMs 1 3 7 8 No. of workshops / conferences 0 0 0 3 No. of joint publications 7 30 54 ~200 No. of training schools 1 0 1 2 The Book We have a contract with the Royal Society of Chemistry to publish Handbook of Short Wavelength Laboratory Sources: Principles and Practices Fully-edited camera-ready manuscript is due by 30 June 2012. WG leaders are section editors. So far we have 28 contributions, but can still take more some people offered but have not yet delivered. In order to give time for editing, we need all manuscripts by 31 January 2012 AT THE VERY LATEST!!! If you nead yuor contirbution too be porof raed or editted, see www.edisci.co.uk 4

Scientific context and objectives (1/2) Background / Problem statement: Short wavelength radiation has been used in medicine and materials studies since immediately after the 1895 discovery of x-rays. The development of synchrotron sources over the last ~25 years has led to a boom in applications in other areas, including environmental science. Despite the widely acknowledged advantages of synchrotron radiation, there is not enough to go round. Due to the cost of such sources this is likely to remain the case. Hence the need to develop alternative, cheaper, more accessible sources which can offer at least some of the properties of synchrotrons. Brief reminder of MoU objectives: To advance European research and development in laboratory scale short wavelength sources in order to widen access to research and analysis that currently can only be undertaken at large scale facilities such as synchrotrons (and free electron lasers). 5

Scientific context and objectives (2/2) Research directions: The Working Groups were designed to carry out inter-connected tasks: WG1 Modeling & Simulation, giving direction to the wide range of experimental parameters that must be varied to optimize source output; WG2 Source Development, Improvement & Characterization, in order to verify the results of WG1 and to provide optimum emission properties; WG3 Integrated Systems: Sources, Optics and Detectors, to ensure optimum use of the source output; WG4 Applications: the raison d'être for the developments of WG1-3. Nowhere else in the World is there such a concerted effort in developing laboratory based alternatives to synchrotrons. 6

Working groups 1) Modelling and Simulation: To provide guidance on optimising the performances of EUV and x-ray sources, including those based on electron-impact (microfocus), plasmas, laser-like processes such as high-harmonic generation, and inverse Compton (Thomson) scattering. This will enable the best parameters to be established for generating specific wavelengths, e.g., 13.5nm, or ranges, e.g., the water window, as well as conditions leading to coherent output at short wavelengths. 2) Source Development, Improvement and Characterization: To develop and improve new and existing sources to enhance brilliance and coherence, with energy ranges for specific applications (including multi-energy sources) by reducing source size and improving flux, and to improve spectral features and time structure shorter pulses, higher repetition rates. 3) Integrated Systems: Sources, Optics and Detectors: It does not make sense to optimise the output of radiation sources if later system components either cannot make use of or seriously degrade the improved source performance. The aim of this working group is thus to study, design, engineer and characterize integrated systems, involving short wavelength optics (focusing and beam manipulation) and detectors (spatially, temporally and energy resolving), that can utilize the sources modelled and developed in WGs 1 and 2. 4) Applications: Arguably the most important WG, as opportunities for new or improved applications must arise from the Action if is to be judged a success. Potential applications include x-ray imaging for the life, medical, environmental and materials sciences and for cultural heritage, extreme ultraviolet lithography for future generation microcircuits, surface modification and the microprobing of cells and tissues for studies related to radiation induce cancers and their therapies. 7

Results vs. Objectives Through modeling emission characteristics, we now have a much enhanced understanding of the most important source parameters (WG1). We have identified further potential mechanisms for laboratoryscale short wavelength sources, such as laser wakefield acceleration (WG2). Improved optics and detectors, developed within the Action*, have lead to more efficient use of the source output (WG3). The very wide range of cross-disciplinary applications which will be enabled by the work of the Action could not be envisaged by a single institution (WG4). The synergy with IE0601 has further enhanced the possibilities here. *both as a direct result of COST funding and through national / cross-national funds raised (in part) through the support of COST. 8

The Future As a result of new partnerships formed during the Action, we have been successful in obtaining Erasmus Mundus doctoral training. Extreme-ultraviolet and X-ray Training in Advanced Technologies for Interdisciplinary Cooperation (EXTATIC), ref 520293-1- 2011-1-IE-ERA MUNDUS-EMJD, is a direct outcome of COST MP0601; the development of a Joint Doctoral Programme was a stated objective of MP0601. Academic Institutions Associate Institutions Associate Industries Dublin City University*, IE (lead Institute, Professor John Costello) *Active participants in MP0601 EUVRC, USA Bruker, DE King s College London*, UK Purdue University, USA EPPRA*, FR Military University of Warsaw*, PL Tongji University*, China FhG-ILT, DE RWTH Aachen*, DE University College Dublin*, IE University of Padova*, IT Southampton University*, UK Czech Technical University*, CZ Rigaku*, CZ/JP Silson*, UK PREVAC, PL 9

Challenges All working groups progressed largely according to plan, although there was more emphasis on WGs1, 3 & 4, and less on WG2, than originally envisaged. The progress made so far will be made use of in the new Erasmus Mundus programme EXTATIC, which will have 4 administrative work packages (WPs) Governance, Administration, Mobility & Curriculum and 6 subject WPS based on research undertaken in MP0601 Sources, Optical Systems, Metrology/Analysis, Radiobiology, Photoionisation & Nanostructuring/Ablation. The challenge will lie in integrating the teaching programme over several institutions; the 8 academic partners are meeting in Dublin on 1 December to discuss this and other aspects. The graduate text being prepared by members of MP0601 will be used in EXTATIC. A new Action proposal involving several members of MP0601, Advanced X-ray Spatial and Temporal Metrology, passed the preliminary evaluation stage, but just missed out at the final evaluation. It has been resubmitted and again, I understand has passed the preliminary stage. We also need to devise methods of continuing collaborative work with members of IE0601 10