Evaluation on Glare from Vehicle Lamps and Effectiveness of Road Components as Glare Barriers Mangkuto, R.A.; Paripurna, A.; Soelami, F.X.N.

Similar documents
Document Version Publisher s PDF, also known as Version of Record (includes final page, issue and volume numbers)

Aalborg Universitet. CLIMA proceedings of the 12th REHVA World Congress volume 2 Heiselberg, Per Kvols. Publication date: 2016

Structural application of perforated aluminium plates in a footbridge canopy van Hove, B.W.E.M.; Soetens, F.

The human body as its own sensor for thermal comfort

A sound indoor climate for a museum in a monumental building Schellen, H.L.; Martens, M.H.J.

A sound indoor climate for a museum in a monumental building Schellen, H.L.; Martens, M.H.J.

Mixed-integer linear program for an optimal hybrid energy network topology Mazairac, L.A.J.; Salenbien, R.; de Vries, B.

Document Version Publisher s PDF, also known as Version of Record (includes final page, issue and volume numbers)

Designers Light Forum. Rethinking urban pedestrian lighting metrics. Susanne Seitinger, PhD Leora Radetsky March 14, 2018

Published in: Proceedings of the 7th International Conference on Healthy Buildings 2003, Singapore, December 2003, Vol. 2

The comprehensive housing renovation approach

Determination of the chloride diffusion coefficient in blended cement mortars Elfmarkova, V.; Spiesz, P.R.; Brouwers, H.J.H.

Slab cooling system design using computer simulation

Shrinkage Properties of Cement Stabilized Gravel

Multi-angled façade system for office building renovation Hannoudi, Loay Akram; Christensen, Jørgen Erik; Lauring, Gert Michael

Risk-based maintenance and replacement strategy for protection relays Morren, J.; Berende, M.J.C.

Published in: Proceedings of the RILEM International workshop on performance-based specification and control of concrete durability

Comsol Multiphysics for building energy simulation (BES) using BESTEST criteria Jacobs, P.M.; van Schijndel, A.W.M.

Aalborg Universitet. CLIMA proceedings of the 12th REHVA World Congress Heiselberg, Per Kvols. Publication date: 2016

Potential of Natural Ventilation in Shopping Centres Diederichsen, Alice; Friis, Kristina; Brohus, Henrik; Tranholm, Gitte T.

Satisfaction and self-estimated performance in relation to indoor environmental parameters and building features

Published in: Proceedings of the 20th Annual Symposium of the IEEE Photonics Benelux Chapter, November 2015, Brussels, Belgium

Electroplating of gold using a sulfite-based electrolyte

Opportunism is required to meet software demand

Production error analysis for a line of manufacturing machines, variable structure control approach Starkov, K.; Pogromskiy, A.Y.; Rooda, J.E.

Lot-sizing and flow production in an MRP-environment

Visual Performance and Safety Benefits of Adaptive Curve Headlighting Systems

Document Version Publisher s PDF, also known as Version of Record (includes final page, issue and volume numbers)

Measurements of Energy Performance and Indoor Environmental Quality in 10 Danish Passive Houses Larsen, Tine Steen; Jensen, Rasmus Lund

Published in: 7th NCEUB Conference : The changing context of comfort in an unpredictable world, April 2012

Ventilative cooling potential in low-energy dwellings : the HoTT case study Bouwens, E.P.M.; Loomans, M.G.L.C.; Hensen, J.L.M.; Lichtenberg, J.J.N.

Fiber Bragg grating sensor based on external cavity laser

Energy Consumption and Indoor Environment Predicted by a Combination of Computational Fluid Dynamics and Building Energy Performance Simulation

Human response to individually controlled micro environment generated with localized chilled beam

Verification Methods For New Zealand Building Code Clause G8 Artificial Light

Heiselberg, Per Kvols; Andresen, Inger; Perino, Marco; van der Aa, Ad

Simulation Study of Discharging PCM Ceiling Panels through Night - time Radiative Cooling

Individually controlled localized chilled beam in conjunction with chilled ceiling: Part 1 Physical environment

Published in: CleanTech for Sustainable Buildings: From Nano to Urban Scale (CISBAT), Lausanne, September 2011

Extensions to the manpower planning system Formasy

Aalborg Universitet. Published in: Passive and Low Energy Architecture 2008 Conference, Dublin, 22<sup>nd</sup> to 24<sup>th</sup> October 2008

Performance evaluation of low concentrating photovoltaic/thermal systems: A case study from Sweden

Document Version Publisher s PDF, also known as Version of Record (includes final page, issue and volume numbers)

ARCHIVED. Compliance Document for New Zealand Building Code Clause G8 Artificial Light. Prepared by the Department of Building and Housing

Published in: Proceedings of the 19th Annual Symposium of the IEEE Photonics Benelux Chapter, 3-4 November 2014, Enschede, The Netherlands

Dynamic Model-Driven Energy Retrofit of Bøgevangen and Runevej Daycare Centers in Aarhus

Electron micrographic digital image correlation : method optimization and microstructural banding case study

Aalborg Universitet. CLIMA proceedings of the 12th REHVA World Congress Heiselberg, Per Kvols. Publication date: 2016

The Roskilde Domes 2011 and 2012

Street Lighting and Public Safety: New Nighttime Lighting Documentation Method

LED LOW BEAM LIGHT WITH 77 % ENERGY REDUCTION

Performance of Ductless Personalized Ventilation in Open-Plan Office - Field Survey

Intelligent Glazed Facades for Fulfilment of Future Energy Regulations Winther, Frederik Vildbrad; Heiselberg, Per Kvols; Jensen, Rasmus Lund

Sensitivity Analysis Applied in Design of Low Energy Office Building Heiselberg, Per Kvols; Brohus, Henrik

Case study of a batch-production/inventory system

Investigations of Intelligent Solar Heating Systems for Single Family House

Joint and column behaviour of slotted cold-formed steel studs

The Design of Building and Services Affects Indoor Environments and Impacts Productivity

Performance assessment of a ventilated mattress for pollution control of the bed microenvironment in healthcare facilities

Thermal comfort assessment of Danish occupants exposed to warm environments and preferred local air movement

The transformation factor: a measure for the productive behaviour of a manufacturing process de Ron, A.J.

Analysis of a plus-energy house for improved building and HVAC system design

Parametric analysis of the operation of nocturnal radiative cooling panels coupled with in room PCM ceiling panels

RAJARAM BHAGAVATHULA Senior Research Associate

Working in a broad partnership in the Kenya Miniwind Project

Electric vehicles or use of hydrogen in the Norwegian transport sector in 2050?

Modelling of a small scale reciprocating ORC expander for cogeneration applications

Tilburg University. Market segmentation Verhallen, T.M.M. Published in: Oog voor de doelgroep. Publication date: Link to publication

The Use of System Identification Tools in MatLab for Transfer Functions van Schijndel, A.W.M.

Lighting. Jaakko Ketomäki, Professor of Practice

Computational Fluid Dynamics and Building Energy Performance Simulation Nielsen, Peter Vilhelm; Tryggvason, T.

Wind Turbines on CO2 Neutral Luminaries in Urban Areas

Document Version Publisher s PDF, also known as Version of Record (includes final page, issue and volume numbers)

Enabling big data to increase output at NXP semiconductor operations Wiers, V.C.S.; de Kok, A.G.; Dijkman, R.M.

Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test

The Rolling Stock and Depot Recovery Problem

OCCUPATIONAL HEALTH AND SAFETY AUTHORITY ACT, 2000 (ACT No. XXVII of 2000)

Moisture supply in Danish single-family houses the influence of building style Hansen, Ernst Jan de Place; Møller, Eva B.

Aalborg Universitet. Land Management and Means of Planning Control Enemark, Stig. Published in: Ikke angivet. Publication date: 2006

The Project Design Document

Premature failure of poly-l/d-lactide bioresorbable spinal cages; Pittfalls in designing in time-dependent materials

POLICY TRAILS LIGHTING

Comparative Performance of Internal Venetian Blind and Roller Blind with Respects to Indoor Illumination Levels

Managing Light & Daylight Efficiently for Tropical Office Buildings

ADVANCED FAÇADES AND HVAC SYSTEMS: PRELIMINARY RESULTS OF FULL-SCALE MONITORING

Thermal Environment evaluation in commercial kitchens

Leslie (Les) Pace, CEM, CDSM, CSDP, LC, CLEP Serving K-12 since 1970

The predictability of lumped BES models, a case study

Daylight has been a primary source of lighting in buildings. Daylighting improve indoor environmental quality and visual comfort. Moreover, it reduces

Performance management systems: a global perspective.

Performance management systems: a global perspective.

Sensitivity Analysis of Personal Exposure Assessment Using a Computer Simulated Person Brohus, Henrik; Jensen, H. K.

Risø Energy Report 8. The intelligent energy system infrastructure for the future Conclusions and recommendations

CEN technical committee 254 on Flexible sheets for waterproofing Hendriks, N.A.

Measured temperature and moisture conditions in the roof attic of a one-and-a-half story house Nielsen, Anker; Morelli, Martin

Aalborg Universitet. Check your school's energy performance. Jensen, Ole Michael. Published in: Eceee 2007 Summer Study : Saving energy - just do it!

Renovation of a Detached Single-Family House into an Energy Efficient Low Energy House Larsen, Tine Steen; Maagaard, Steffen; Jensen, Rasmus Lund

Calculation of the yearly energy performance of heating systems based on the European Building Directive and related CEN Standards

Night Work Specification

Integrated electrical-mechanical analysis - The impact of power system on wind turbine design and vice versa

Transcription:

Evaluation on Glare from Vehicle Lamps and Effectiveness of Road Components as Glare Barriers Mangkuto, R.A.; Paripurna, A.; Soelami, F.X.N. Published in: Proceeding of 3rd SEATUC Symposium, Johor Bahru, Malaysia, February 2009 Published: 01/01/2009 Document Version Accepted manuscript including changes made at the peer-review stage Please check the document version of this publication: A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. The final author version and the galley proof are versions of the publication after peer review. The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication Citation for published version (APA): Mangkuto, R. A., Paripurna, A., & Soelami, F. X. N. (2009). Evaluation on Glare from Vehicle Lamps and Effectiveness of Road Components as Glare Barriers. In Proceeding of 3rd SEATUC Symposium, Johor Bahru, Malaysia, February 2009 (pp. 1-4). Johor Bahru, Malaysia. General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Users may download and print one copy of any publication from the public portal for the purpose of private study or research. You may not further distribute the material or use it for any profit-making activity or commercial gain You may freely distribute the URL identifying the publication in the public portal? Take down policy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Download date: 14. Feb. 2018

EVALUATION ON GLARE FROM VEHICLE LAMPS AND EFFECTIVENESS OF ROAD COMPONENTS AS GLARE BARRIERS Rizki Armanto, F.X. Nugroho Soelami, and R.M. Soegijanto Department of Engineering Physics, Institut Teknologi Bandung ABSTRACT Vehicle lamps are vital components which are required to ensure the driver s safety, particularly at nighttime. However, vehicle lamps may cause glare which can reduce visibility and create discomfort. The objectives of this research are to evaluate glare from car headlamp and motorcycle lamps; and to study the effectiveness of road components on highway median, i.e. paddle, vegetation, and jersey barriers (87.5 and 122.5 cm high) as glare barriers. Luminance from headlamps and vertical illuminance on observer s eye were measured to observe glare effect on vehicle drivers, expressed with the de Boer rating. The experiment results show that car headlamps observed at nighttime by car drivers in highway without barriers, scored 3~5 (disturbing~acceptable) on the de Boer scale; while motorcycle lamps in static position scored 1~3 (unbearable~disturbing). Paddle was found to be the most effective glare barrier in highway, for it might reduce glare up to scale 6 (acceptable). 1. INTRODUCTION Vehicle (car and motorcycle) lamps are vital components which are required to ensure the driver s safety, particularly at nighttime. However, vehicle lamps may cause glare which can reduce visibility and create discomfort for drivers at the opposite direction. The objectives of this research are to evaluate glare from car headlamp and motorcycle lamps; and to study the effectiveness of road components on highway median, i.e. paddle, vegetation, and jersey barriers (87.5 and 122.5 cm high) as glare barriers. Luminance from the source, vertical illuminance on observer s eye, and angle between source and line of view were measured to obtain the glare rating, which is expressed with the de Boer scale, between 1 (unbearable) and 9 (just noticeable). 1.1 de Boer Scale The de Boer scale is commonly used scale for describing subjective glare effect, which can be classified as: Table 1 The de Boer scale Rating Qualifier 1 Unbearable 2 3 Disturbing 4 5 Just acceptable 6 7 Satisfactory 8 9 Just noticeable A mathematical model for the scale had been developed by Schmidt-Clausen and Bindels (1974), which can be expressed as: E W = 5 2 log (1) L 46 003 1 + θ 04 where W : de Boer rating E : vertical illuminance on observer s eye [lux] L : luminance from source [cd/m 2 ] θ : angle between source and line of view [arcminute] 2. EXPERIMENTS 2.1 Car Headlamps Measurement 2.1.1 Without Barriers The experiments were done at nighttime in Pasteur-Padalarang-Cikampek highways using luminance meter and luxmeter. The instruments were positioned on eye level of the observer, who drove the car at approximately 60 cm from the road median and at height

of 108 cm from ground (Paripurna, 2007). Several types of car, i.e. sedan, jeep/multi-purpose vehicle (MPV), small and large truck/bus from opposite direction (without median barrier) were observed, while luminance from the headlamps and illuminance values on observer s eye were recorded. Light from surrounding background was assumed to be minimal, so that the headlamps could be considered as the most dominant source. The measurement results are tabulated in Table 2. Vegetation Jersey 87.5 cm Jersey 122.5 cm Sedan 1 40 Small truck/bus 1 21 Sedan 1 39 Jeep/MPV 2.0 42 Sedan 1 65 Jeep/MPV 1.0 70 2.2 Motorcycle Lamps Measurement The experiments were done in static condition using luminance meter which was attached with telescope, luxmeter, and angle protractors. To minimize light coming from surrounding environment, the measurement was taken at nighttime in open field with almost no ambient light. The observed lamps were fog lamps (a pair), low beam, and high beam. Measurements were taken 3 m from the lamp, at angles of 1 and 60 degrees from its normal, and at height of 120 cm (eye level for sedan car driver) (Yuniardy, 2008). Each observed fog lamps were 10 watts incandescent at height of 76 cm from ground, while the low and high beam were 32 watts incandescent at height of 98 cm from ground. Each lamps were assumed to have symmetrical light distribution of 120 degrees horizontal angle, thus angle of 60 degrees was taken as the minimum criteria for the measurement. Fig. 1 Layout plan for car headlamps measurement Table 2 Car headlamps measurement results (without glare barriers) Car type E [lux] L [cd/m 2 ] Sedan 1.0 14 Jeep/MPV 1.0 88 Small truck/bus 1.0 38 Large truck/bus 1 21 Subjective glare assessments were done by the observers, using 4-scales criteria: A (unbearable), B (disturbing), C (acceptable), and D (just noticeable). 2.1.2 With Barriers In order to study the effectiveness of road components as glare barriers, experiments were done similarly in the same highways. The exact location was chosen at place where road components, i.e. paddle, vegetation, and jersey barriers of 87.5 and 122.5 cm high, were found as barriers on the road median. The measurement results are tabulated in Table 3. Table 3 Car headlamps measurement results (with glare barriers) Barrier type Car type E [lux] L [cd/m 2 ] Small truck/bus 1 65 Paddle Large truck/bus 1 41 Fig. 2 Layout plan for motorcycle lamps measurement The measurement results are tabulated in Table 4. Table 4 Motorcycle lamps measurement results Angle [ ] Source E [lux] L [cd/m 2 ] Fog lamps 4.00 06 1 Low beam 133 1.37 High beam 13.67 1.67 Fog lamps 2.33 06 60 Low beam 3.33 09 High beam 3.67 15 Subjective glare assessments were also done by the observers, using the same 4-scales criteria as in car headlamps.

3. ANALYSIS 3.1 Glare from Car Headlamps 3.1.1 Without Barriers Glare effects from each car headlamps (without barriers) were determined by calculating the de Boer rating (W), by assuming 3 degrees as the value of angle θ. Compared with the qualitative scores obtained by subjective assessments, the results are tabulated in Table 5. Table 5 Glare ratings for car headlamps (without glare barriers) Car type W Score Sedan 3 B Jeep/MPV 4 B Small truck/bus 3 A Large truck/bus 5 D The results show that headlamps of sedan and small truck/bus gave the lowest de Boer ratings (3 disturbing), in agreement with the qualitative scores. Large truck/bus gave the least glare effect (5 just acceptable), most probably because its lamps wattage were not as great as sedan and small truck/bus. 3.1.2 With Barriers Glare effects from each car headlamps (with barriers) were determined in a similar manner with the ones without barriers. Compared with the qualitative scores obtained by subjective assessments, the results are tabulated in Table 6. Table 6 Glare ratings for car headlamps (with glare barriers) Barrier type Car type W Score Paddle Small truck/bus 6 D Large truck/bus 6 D Vegetation Sedan 5 D Small truck/bus 5 C Jersey Sedan 5 D 87.5 cm Jeep/MPV 3 B Jersey Sedan 6 D 122.5 cm Jeep/MPV 4 C The results show that glare barriers might reduce the subjective effect of glare. The highest de Boer ratings were given by paddle barrier (6 acceptable), in agreement with the qualitative scores. Jersey barrier of 87.5 cm high was not as effective as the other barriers, scoring down to 3 (disturbing) on the de Boer rating, most probably because its height was not sufficient to block the light path coming from the headlamps in opposite direction. However, the results could be irrelevant for curved and/or sloped highway, since the conventional glare barriers might not be effective enough to block the light path. In those cases, specially designed anti-glare modules should be installed on the median. 3.2 Glare from Motorcycle Headlamps Glare effects from each motorcycle lamps were determined in a similar manner with the ones without barriers, using 1 and 60 degrees as the value of angle θ. The results are tabulated in Table 7. Table 7 Motorcycle lamps measurement results Angle [ ] Source W Score Fog lamps 1 D 1 Low beam 1 C High beam 1 B Fog lamps 3 D 60 Low beam 3 C High beam 3 C The results show that at angle of 1 degrees, motorcycle lamps gave the lowest de Boer ratings (1 unbearable). At angle of 60 degrees, the lamps gave higher de Boer ratings (3 disturbing). Based on qualitative assessments, the greatest glare effect was caused by high beam, while the least was given by fog lamps. The results are in agreement with facts that fog lamps had the least electric power. Compared with low beam, high beam had a greater vertical angle light distribution, thus resulted in more glare effect on vehicle drivers. CONCLUSION The experiment results show that car headlamps observed by car drivers at nighttime in highway without barriers, scored 3 (disturbing) to 5 (acceptable) on the de Boer scale. Headlamps of sedan and small truck/bus gave the lowest de Boer ratings, in agreement with the qualitative scores, while large truck/bus gave the least glare effect. Motorcycle lamps in static condition observed by car drivers scored 1 (unbearable) to 3 (disturbing). The greatest glare effect was caused by high beam, while the least was given by fog lamps. Paddle was found to be the most effective glare barrier for car headlamps, for it might reduce glare up to scale 6 (acceptable). NOMENCLATURE W : de Boer rating E : vertical illuminance on observer s eye [lux] L : luminance from source [cd/m 2 ] θ : angle between source and line of view [arcminute]

REFERENCES Bommel, W.J.M. and de Boer, J.B. Road lighting. Deventer: Philips Technical Library, 198 Paripurna, A, Soelami, F.X.N., Hidayat, H. Evaluation on road median as glare barrier in highway, Department of Engineering Physics ITB, 2007. Schmidt-Clausen, H.J., Bindels, J.T.H. Assessment of discomfort glare in motor vehicle lighting. Lighting Research & Technology, 1974; 6:79-88. Yuniardy, D., Soelami, F.X.N., Soegijanto, R.M. Evaluation on glare from motorcycle lamps at daytime, Department of Engineering Physics ITB, 2008. Rizki Armanto received the B.Sc. (2006) in Department of Engineering Physics ITB, at the moment is pursuing the M.Sc. degree in building physics from Department of Engineering Physics ITB. He is a research assistant in Laboratory of Building Physics and Acoustics ITB. His current research is in lighting and psycho-visual effect of daylighting on man. F.X. Nugroho Soelami received the B.Sc. (1979) in Department of Engineering Physics ITB, M.B.Env. (1990) in built environment from University of New South Wales, and Ph.D. (1995) degree from School of Architecture, University of New South Wales. He is an Associate Professor in Department of Engineering Physics ITB. His current interests include lighting, building envelope, and energy conservation in building. R.M. Soegijanto received the B.Sc. in Department of Engineering Physics from ITB (1961), M.Sc. (1970) in building acoustics from University of New South Wales, and Ph.D. (1982) degree in building physics from ITB. He is a Professor of Building Physics and Acoustics in Department of Engineering Physics ITB. His current interests include acoustics, lighting, natural ventilation and thermal comfort in building.