siemens.com/mobility Traffic simulation with PTV Vissim Leading-edge software fully integrated in the Sitraffic landscape
For urban or interurban traffic, rail transport or private travel: To all kinds of traffic engineering questions, PTV Vissim will provide a conclusive answer that can be directly translated into technological solutions for implementation on site. 2
Simulations... PTV Vissim can be used to simulate the following processes and systems: Fixed-time control schemes Traffic-actuated control schemes such as Sitraffic PDM(e) or S-L(e) Adaptive network control schemes such as Sitraffic Motion MX Numerous other control processes of other providers Coordinated green phases Public transport priority schemes Rail transport control processes Priority schemes for emergency vehicles Ramp metering processes Dynamic speed limit panels Dynamic lane opening signs 3
PTV Vissim: A powerful simulation and modeling tool that provides conclusive answers to all kinds of traffic engineering questions... and modeling applications... Complex signalized and non-signalized intersections Round-abouts U-turns, mixed-flow lanes, separate (multi-lane) turn lanes Bicycle paths as well as lanes shared by different modes (bicycles and motorized vehicles) Public transport stops and terminals Pedestrian-vehicle interaction Multi-lane motorways with userdefined curviness and roadway grades Motorway junctions and interchanges as well as merging and weaving areas... for the widest range of traffic engineering issues Roadworks: optimum set-up and coordination of roadwork sites Car2X applications: cost-effective investigation of the effects of Car2X applications Site development: creation of site development plans, for instance for supermarkets, malls or entire urban districts Junctions: design and dimensioning of intersections and nodes Logistics centers: optimization of traffic flows at logistics centers Toll stations: performance maximization for toll plazas and tolling lanes PT nodes: modeling of complex public transport nodes PT priority schemes: analysis of public transport prioritization measures Parking: planning of parking facilities and modeling of parking-related traffic Rail transport: performance analyses of rail transport systems Environmental impact: environmental impact studies, including emissions modeling Traffic-actuated control schemes: design, testing and evaluation of traffic-actuated signal control systems Traffic calming: analysis of traffic calming measures Visualization: visualization of planning alternatives to support the political decision-making process Airport links: design of transport links and simulation of airport apron traffic Pedestrian flows: modeling of pedestrian behavior in different environments as well as evacuation strategy planning Intelligent transport systems: evaluation and optimization of Intelligent Transport Systems 4
Multi-modal traffic simulation with PTV Vissim The ideal tool for transport planners Whether you need to take fundamental decisions on the layout of your transport infrastructure (round-about or classic intersection?), evaluate public transport priority schemes or assess the effects of specific signal switching patterns PTV Vissim enables precise simulations of the impact on all traffic flows. The system is the world s leading software for microscopic traffic simulation and covers all modes of transport, from motorized private transport, goods transport and road- or rail-bound public transport right up to pedestrians and cyclists. Its wide range of analysis options makes PTV Vissim a powerful tool for planning and optimizing transport systems in both urban and interurban contexts. PTV Vissim is seamlessly integrated in the Sitraffic system landscape PTV Vissim is fully compatible with Sitraffic Office, allowing the software to simulate the entire range of traffic control and management systems of the Sitraffic family: from traffic control platforms with Sitraffic Scala, Sitraffic Concert and Sitraffic Guide and adaptive network control with Sitraffic Motion MX down to individual traffic controllers. This opens up a wide scope of applications for intersection, route and network simulation. Sitraffic Office and PTV Vissim ideally complement each other All steps can be carried out at a single workstation, from planning an intersection (including tests and simulation of intersection design and data supply) right up to planning traffic actuation algorithms for entire networks. PTV Vissim and Sitraffic Office are seamlessly integrated, enabling the direct transfer of all required data and configuration parameters from Sitraffic Office to PTV Vissim. Hence the user can start the test or simulation process right within Sitraffic Office. The types of data that can be transmitted include, for instance, intersection topology, layout plan, individual links or the entire network with all relevant objects, as well as traffic volume profiles on the basis of existing directional volume flows. For different intersection states or versions, identical simulation parameters are used. Naturally, all relevant data are stored also in the central data base of Sitraffic Office. With PTV Vissim, planning trafficactuated control processes is based on an exact model of the physical controller There are tools where the simulations at the test station differ considerably from the actual processes in the physical traffic equipment. Not so with PTV Vissim. Special VA modules and identical codes ensure that the simulations of trafficactuated control processes exactly match their real-life counterparts. PTV Vissim packages to suit various extension stages of traffic-actuated network control systems For simulating Motion MX we have designed ready-to-use virtual simulation engines for three different levels of system complexity: PTV Vissim Compact: for max. 3 traffic signal systems and a maximum extension of 1.5 km in x- or y-direction PTV Vissim Standard: for max. 20 traffic signal systems and a maximum extension of 10 km in x- or y-direction PTV Vissim Extended: for max. 999 traffic signal systems and an extension of more than 10 km in x- or y-direction PTV Vissim provides easy-to-understand visualizations for convincing presentations PTV Vissim makes it possible to present the simulation and evaluation results for different scenarios and planning cases in different easy-to-understand and thus convincing forms such as detailed reports, different perspectives and impressive 3D animated graphics. So also non-professionals in traffic engineering will be enabled to make informed decisions. PTV Vissim: Convincing functionality! For all transport modes from bicycles to public transport Seamless integration in the Sitraffic landscape Complete packages for three different levels of complexity Planning at the test workstation exactly maps the controller processes State-of-the-art graphical interface Free trial version 5
Use cases and functions PTV Vissim provides conclusive answers to all kinds of traffic engineering questions PTV Vissim is the ideal tool for building a sound and conclusive knowledge basis for informed decisions on all kinds of traffic engineering questions. The system has been designed for analyzing and modeling networks of any size and traffic management systems of all types, from individual intersections right up to entire conurbations. The links and connectors concept of the PTV Vissim network topology allows for highest versatility and in combination with detailed motion models extremely precise traffic modeling, including pedestrians and their complex interaction with the surrounding traffic flows. How effective is the PT priority scheme in the inner city of x? What will be the benefits of traffic-actuated signal control at intersection y? What are the optimum dimensions and design of a large PT node? PTV Vissim makes it easy to find the answers to these and many other questions. 6
PTV Vissim can model both motorized and non-motorized traffic flows For traffic flow modeling, an unlimited number of vehicle types can be defined in PTV Vissim, including cars, trucks, vehicles equipped with satnavs, busses, tramway and light-rail vehicles and even airplanes. In addition to motorized means of transport, the system can also include pedestrians, cyclists and wheelchair users in the simulation. PTV Vissim uses a psycho-physical driving-behavior model For simulating the movements of the vehicles involved, PTV Vissim uses an evidence-based psycho-physical car-following model with a temporal resolution of up to 1/10 seconds. The rule-based lane-change model has been optimized for simulating urban as well as interurban traffic. Driver behavior patterns can be defined on the basis of user-configurable driver-vehicle classes. PTV Vissim offers different ways of visualizing route choices When working with PTV Vissim, the user has the choice of different options for visualizing route choices to perfectly suit the available data sets and the specific objective of the analysis at hand. PTV Vissim simulations can include all types of public transport For many years now, PTV Vissim has been the software of choice for modeling public transport. For studies on mass transit, the user can specify public transport routes, various public transport vehicle types, timetables, stops, stop types and dwell times. Different network analysis options are available. Also for studying various aspects of signal control and multimodal transfer points, PTV Vissim is the ideal planning tool. 7
Network Window Backgrounds Network Objects Levels Quick View User-friendly: The clearly structured user interface makes it especially easy to select network objects, backgrounds, overview maps or quick views etc. The user can open an unlimited number of network and list windows from the View window. List Smart Map Result lists: The result list automatically displays one result line for each combination of network object, simulation run and time interval. With a click on the corresponding button in the tool bar, the list can be easily exported to a text file or data base. 3D visualizations turn the results of multimodal simulations into easy-tounderstand, convincing arguments. Even pedestrian flows including their interaction with other road users can be simulated and visualized in detail. 8
PTV Vissim The innovative tool at the leading edge of simulation technology It goes without saying that PTV Vissim offers the entire range of convenient features of modern software technology. The windows are freely dockable or can be operated in floating mode, if desired; the mouse keys are user-configurable and there is a wide array of useful pop-up menus, to name just a few advantages. For the update from version 5.40 to version 6.0, numerous new features have been introduced in fact, the list of improvements would fill 20 whole DINA4 pages. Never before has it been so easy to simulate the effects of traffic management measures, fully test all scenarios and determine the optimum scheme for 1:1 implementation in the physical traffic landscape! High productivity thanks to an extremely user-friendly design With PTV Vissim, building simulation models becomes a breeze. The wide range of interfaces (COM, DriverModel, DrivingSimulator, SignalControl, Emission, AN) makes it easy to import existing network data sets from Sitraffic Motion MX or other strategic transport models, connect external signal controllers, pass on emissions data and simulate traffic flows for in-depth analyses. The graphical user interface with flexibly dockable windows, different editors for efficient editing of network objects and their attributes as well as numerous options for outputting results all add up to perfect user-friendliness. 2D or 3D visualization with a click of the mouse PTV Vissim allows you to switch perspective with a click of the mouse and present the results of your analysis in a visual format that will convince both professionals and laypersons. 2D animated graphics and impressive 3D visualizations help you make com - plex transport flows and interactions intuitively understandable by all and provide a sound basis for public decisionmaking processes. Free trial version: Go ahead and put PTV Vissim to the test! We will be happy to send you a free trial version of the software in German or English so you can explore all its convenient features and efficient functions. You can use the trial version for free for a whole year. We are convinced that you will be convinced. 9
PTV Vissim is a product of PTV Group, Karlsruhe. Siemens implements and sells a version of PTV Vissim that has been optimized for use as part of the Sitraffic landscape and includes the process modules required for full compatibility. These modules eliminate the need to implement and test the logic algorithms required for the creation and fine-tuning of traffic-actuated traffic light systems. www.vision-traffic.ptvgroup.com Siemens AG Infrastructure & Cities Sector Mobility and Logistics Division Road and City Mobility Otto-Hahn-Ring 6 81739 Munich Germany www.siemens.com Siemens AG 2014 All rights reserved Printed in Germany DEI 73/61340 WS 09143. Dispo No. 22300 K No. 686 Order No. A19100-V350-B188-X-7600 The information in this document contains general descriptions of the technical options available. The required features should therefore be specified in each individual case at the time of closing the contract. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action and integrate each component into a holistic, state-of-the-art security concept. Third-party products that may be in use should also be considered.